APIC calibration not consistent with PM-Timer

Hi ArchUsers!!!
I'm doing some diagnostic to my laptop to make it work well and 'cause I like to solve/correct bad things.
Let's start from this error
# journalctl -b
APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 15
Model name: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz
Stepping: 13
CPU MHz: 800.000
CPU max MHz: 2000,0000
CPU min MHz: 800,0000
BogoMIPS: 3991.35
L1d cache: 32K
L1i cache: 32K
L2 cache: 2048K
NUMA node0 CPU(s): 0,1
Tell me if you need some other infos about the laptop!
Last edited by addamm (2014-01-03 11:42:49)

Similar Messages

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

ICal Week view, Date is not aligned with the Time(schedule) of each date

Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

Hi,
i omit the scheduling maergin key in material master,
the result of MRP is
BASIC DATES
Finish 15.10.2009
Start 14.10.2009
PRODUCTION DATES
15.02.2010 14:33:25
14.10.2009 07:00:00
scheduling type i planned order is still "backwards"
so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
this seem not right.
it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
Best regards,
Freddy Ha
Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime

Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
Purchase under Points by ISP (No contract)
Thanks
Abbas

Hello sir
I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
Thanks
SATHISH KUMAR

G/L Account currency is not consistent with G/L Interim Account currency

Hello
A few days ago I was printing checks and suddenly an error occurs
it says something like..."Another user is accessing the same account"
In the reserch I found help in SAP Portal, where I showed how to unlock this part
This I did in Administration->Set up-> Banking-> House Bank accounts
At the end is a column that says BLOCK PRINTING, always locked, but when the error occurs is enabled for the account that has been affected, and a super user must unlock by unchecking the check box.
The problem is that the update that part I get an error message and I have not been able to unlock
The error is
G/L Account currency is not consistent with G/L Interim Account currency [Message 60701-9]
In this regard I have not found anything to help me resolve this error and the printing of checks is blocked
I need your help
Regards.
Yen

Hi
i found the problem, we have an accunt that is just visible in House bank accunt window when try to select an account in the column G/L intermin account, but that account is not an active account , the descrpction says "Copy express transport account" i delete it in all the rowa and finaly we could update the window.
Regards
Yen

Balance of S_ALR_87012168 and S_ALR_87012167 is not consistent with FBL5N

Dear all,
Could you kindly let me what's the reason that cause S_ALR_87012168 and S_ALR_87012167 is not consistent with FBL5N.
When view line item anlaysis the line item is the same with FBL5N, but in the first page of due / not due anlysi, the result is not the same?
Thanks bnd Best Regards.
CSY.

Hello
first thing you should do it is to run the programm SAPF190 if you don't activate NewLedger or TFC_COMPARE_VZ if new ledger is on.
These programms will check the index of the data and compare the amount between index and BSEG/FAGLFLEXA table.
Second point, do you check the analysis with all same option ?
Best regards
Philippe

"IP and router address not consistent with subnet mask"

Hi all,
i have one of the old Powermac G5's running os x 10.3.5 "Panther" with a dual 2.5ghz processor, 512mb or ram, 160 gig hd, and no wireless card. I've been trying to hook the computer up to my network via an Ethernet cable (I have a Linksys WRT54G series router).
the problem is this: When I go through the Network utilities using the "assist me" option, select the LAN option, put in the necessary information (IP address, subnet mask, router address, and the dns host), and select continue, this message pops up:"IP and router address not consistent with subnet mask".
What I've found is that no matter if the computer is plugged in with a cable to the Ethernet port the message comes up which is very unusual.
Thanks in advance.

Have you verified that you indeed have the proper subnet entered?
Why don't you just let the Mac obtain its ip address from the router via DHCP?

Colors not consistent with Snow Leopard 10.6 on an Eizo SX2761W monitor

I am unable to get any color consistency with Snow Leopard 10.6 on my Eizo SX2761W display.
Most of the actual "content" (i.e. images, videos, websites, etc.) is displayed very saturated and dark, much more saturated and dark than in 10.5.8. I presume that's because of Snow Leopard's new gamma value. The problem is, all of OS X's GUI elements, like the dock, icons and color labels in the finder, title bar buttons, etc. are not displayed in the same manner. These elements are all very desaturated, pale and grayish. NoMachine NX sessions running in X11 (via Rosetta) also have this desaturated look in Snow Leopard.
Here's a screenshot comparison I put together, that shows those color inconsistencies using the example of Mozilla's Firefox logo on the web in Safari, on the web in an NX session and as an icon in the Finder and in the Dock:
http://dl.getdropbox.com/u/7276/SnowLeopard-ColorsAndContrast.png (1 MB)
As far as I could test it, I get these color/contrast discrepancies only on the Eizo SX2761W monitor. I checked this on a classic Mac Pro and a late Mac mini with the same results. On a MacBook and its internal display Snow Leopard's colors seem consistent.
I tried to recalibrate the SX2761W profile, I tried out all the other standard color profiles available in Snow Leopard, I tried to copy my old profiles over from a Leopard backup, but I was unable to get rid of the display inconsistencies. After a whole day of trying and tinkering I went back to 10.5.8 to get a consistent color environment back.
Any ideas what's causing this and more importantly what to do about it? I have to say I'm at my wits end. The only thing I can think of is mailing this issue to Apple in the hope there will be a point release in the not too distant future that fixes the problem.

I have what I assume is the same problem. It just started today on my DELL WFP2407 - but remains even when switching to my MacBook Pro's built in screen.
The Dock, Safari, the desktop background - and probably other colour managed applications; all show very pale blue hues with over saturated red. Blue goes towards purple and other colours get muddled and pale. Oddly the Finder displays colours correctly on icons, but not the dock. I took a screenshot of Finder's Safari icon next to The Dock's:
http://www.nuxx.dk/hosting/paledock.png
- Clearly showing significant inconsistency... I just updated to 10.6.1 which didn't change anything.
Needless to say I tried calibrating a new colour profile to no effect, and seeing as the finder itself renders things just fine I'm not sure that's where the issue lies.
This is a huge problem for me, I hope there is a simple solution.
Message was edited by: nuxxie

Timestamp of videos not consistent with photos - appear out of order - bug or user error?

We just returned from Hawaii and, of course, we have a mix of photos and videos. However, subsequent photos and videos taken about the same time, which should have timestamps minutes apart, have timestamps that differ by 4 hours. As I dig into this deeper, it seems all the videos have timestamps 4 hours from what they should be(my view). At a minimum, I believe the photo and video timestamp should be set per a consistent definition.
I am determining this after I imported the pictures into iPhoto. I have done the import several times and the results are consisent.
Example:
IMG_0233.JPG - April 6, 2013 6:14:46 PM
IMG_0234.MOV - April 6, 2013 11:15:08 PM <----This should be 6:15:46 PM
Tried to verify the timestamp of the video and photo while the picture is on the iPhone…had to buy iPhoto for IOS for $5. The photo timestamp is the same as stated in iPhoto(IOW, IMG_0233.JPG is 6:14), but the video timestamp is just April 6, 2013…no exact time. Guess I wasted $5.
Computer Data:Mac Mini 2.3Ghz Intel Core i5 - 8GB Memory - OS X 10.8.3
Iphoto 11 9.4.3
Phone Data:
iPhone 5
iOS 6.1.3
Date & Time preference: 'Set Automatically'=ON
Travel Timezone where pics taken: Hawaii - GMT-10
Home Timezone: Chicago - normally GMT-6(4 hour difference from Hawaii), but right now Chicago is GMT-5 due to daylight savings.
My theory is that there is a bug that sets the video timestamp to the 'home timezone', potentially only when 'automatic timezone is set.
This seems easily fixed by doing a batch change to adjust the timestamp on all videos
Any other explanations? I am hoping I am doing something wrong.

2 things...
1) my opening paragraph says 4 hours, but it should be 5. DOH
2) i just imported a bunch of pictures and videos from an android phone. Same issues. The Android photos seem to be perfectly aligned with the photos from the iphone 5, but the videos are 5 hours off the mark(later). Of course, I want to view the pictures with the time in Hawaii, not Central Time, so the videos are definitely in the wrong from an intuitive standpoint...as I see it.
2013-04-09 11.14.25.jpg - Taken at 11:14am in Hawaii. This data is per the file as it sits in dropbox and viewed by my mac mini Finder. Android puts the file on drop box from the phone, and I imported to iphoto from dropbox. Despite the filename indicating 11:14am, finder says the file was created at 4:14pm. However, iPhoto, correctly puts a timestamp of 11:14am and picture is where I expect it from a time standpoint at 11:14am.
2013-04-09 11.15.05.mp4 - Taken at 11:15am in Hawaii. This was imported into iPhoto via dropbox at the same time, but it is showing up in iPhoto at 4:15pm, throwing off the sorting.
So, now I believe I have an iPhoto issue and probably brought this question to the wrong forum?
I have fixed the problem by doing a 'adjust time and date' to all videos, both from iphone and android, to be 5 hours earlier in time. Now everything lines up, but I am scratching my head why this isn't done consisently between photo and video in iPhoto, and why I have not run into this before.....

Time machine not connecting with new time capsule

Will someone please help? I have just recently joined the MAC family and purchased a new Macbook along with a new time capsule. It took unbelievably long to get things running (ie wireless access with 2 other PC based desktops and a PC laptop and shared network printing with an USB connected printer to the time capsule)- I thought macs were supposed to be easy?! Anyways, the only thing that I cannot figure out is how to properly set up time machine. I follow the instructions and turn time machine on, choose my backup disc (which is the time capsule), but when I click "use for backup", I keep getting the "connection failed- server may not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again" What am I supposed to do now? What is there to check when all of the other computers are able to access the internet (including the Macbook) and wirelessly print. The stupid timecapsule router function is working but the backup portion of it is not???!!!! Please help someone who is about to give the mac and the time capsule to the first person walking down the street - it has been a frustrating 2 days.

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click
Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

Sequence will not validate with run time prompts in business rules

I am in Hyperion Planning v 1.1.1.3, with Workforce initialized. I am creating a sequence of business rules. The rules use run time prompts within them and validate when used on their own. However, when I insert them in a sequence the sequence will not validate, apparently due to the run time prompts.
The sequence returns the error: Cannot calculate. Essbase Error(1200323): Error parsing formula for [FIX STATEMENT] (line 7): expression expected after [(].
Line 7 in the business rule is as follows:
FIX ([rtpYear],[rtpScenario],[rtpVer],[rtpCC],[rtpBU],[rtpEmp])
The problem is not isolated to this business rule, it occurs with any rule I try.
Can sequences function with run time prompts in the included business rules?
Stephen

I have figured out that if any rtp is hidden in the business rule, the sequence will not validate. Is this expected behavior for sequences?
Additionally, hiding the variables in the sequence has no effect if the variables are not hidden in the rule. When launched from a menu in a web form, the user is prompted for values for all variables (except for the Execution Database Name) although they are prepopulated based on the members in the POV, Page, etc. Is this also expected behavior?
I also find that it won't validate if "Merge launch variables" is selected (I have included rules associated with different plan types and with different dimensionality, so this may be expected). The user is prompted to provide values for every variable in each rule in the sequence, many of them duplicates (though, again, they are prepopulated based on members in the form).
Stephen

The rendered records are not consistent with the range

After changing the range with record navigator to render the records,
if navigate to other page and go back,the rendered records will not be
consistent with the record range.
The issue can be reproduced as follows.
1.when select 1-10 range,the first 10 records are rendered.
2.select [Next 10 records] to render the 11-13 records.
3.change to other page and return to the original page.
It is found that the 11-13 records are rendered but the range is 1-10.
You can verify the issue by executing SampleMainPG.xml of the Tutorial.jpr for 11.5.10.2
from Jdeveloper after changing the SampleMainCO.java as below.
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
if (pageContext.getTransactionValue("link") != null)
OAAdvancedTableBean inner = (OAAdvancedTableBean)webBean.findChildRecursive("InnerTable");
inner.clearCache(pageContext);
inner.setAttributeValue("CLEAR_CACHE_ONCE_NOEXECUTE_ATTR", Boolean.TRUE);
<==comment out these original source above.
OAAdvancedTableBean outer = (OAAdvancedTableBean)webBean.findChildRecursive("OuterTable");
outer.queryData(pageContext, false);
<==add the two rows of source above to get the latest query data.
you should to make the records of the table fwk_tbx_employees to be more than 10 just using the SQL script below.
(just need to change EMPLOYEE_ID at your will)
INSERT INTO fwk_tbx_employees (
EMPLOYEE_ID,
TITLE,
FIRST_NAME,
MIDDLE_NAMES,
LAST_NAME,
FULL_NAME,
EMAIL_ADDRESS,
MANAGER_ID,
POSITION_CODE,
SALARY,
START_DATE,
END_DATE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
ATTRIBUTE_CATEGORY,
ATTRIBUTE1,
ATTRIBUTE2,
ATTRIBUTE3,
ATTRIBUTE4,
ATTRIBUTE5,
ATTRIBUTE6,
ATTRIBUTE7,
ATTRIBUTE8,
ATTRIBUTE9,
ATTRIBUTE10,
ATTRIBUTE11,
ATTRIBUTE12,
ATTRIBUTE13,
ATTRIBUTE14,
ATTRIBUTE15 )
VALUES (
17,
'ichiro',
'yamada',
'ichiro yamada',
1,
0,
sysdate,
sysdate,
sysdate,
0,
sysdate,
0,
0,
it seems that if use the functions below,the issue can be workarounded.
But it is not clear whether there is any other impact from these functions.
innerTable1.clearCache(pageContext);
innerTable1.setAttributeValue("CLEAR_CACHE_ONCE_NOEXECUTE_ATTR", Boolean.TRUE);
Could you please share your idea?
Thank you very much in advance.
Best regards,
Wang

FYI. I was able to do what I wanted by first going to page properties and removing unwanted fonts from appearance. Then edit the page, select all, change style to normal, then select the text where you want to use a different style and change style there. This gives consistent appearance with both browsers.

XML Publisher rtf output not consistent with the rtf created

I am using XML publisher to generate a custom report.
The approach I folllowed:
1) AM Class: Write the VO data to XMLNode using vo.writeXML() method
2) XML Publisher Administrator Responsibility: Create a data template and attach the xml created in step1 as "Preview Data"
3) XML Publisher Administrator Responsibility: Create a rtf template (contains images and text), attach the data template (step 2) and attach the rtf created.
4) Controller class: Use TemplateHelper.processTemplate() method, passing the rtf template and the XML data from VO.
5) Verify the rtf output in application.
Issues I am having are as follows:
1) Major issue is page format. I have saved my rtf file with a different page format as below:
     File->Page Setup->Paper->Width:255 pt
               ->Height:165 pt
     File->Page Setup->Margins->Top: 12 pt
                    ->Bottom: 0.1 pt
                    ->Left: 0.1 pt
                    ->Right: 12 pt
When I open my document from the application, the margins and page setup rtf output is not retained (as given in teh doc), hence my whole layout is disturbed.
Thus, I am getting a very weird layout when I open my rtf output from application.
How can I retain the page settings?
2) I added a image, and the size of the image also is not retained as well.
And if I set the layout wrapping style anything other than "In line with text", the image does not show up in the output.
Would greatly appreciate if someone can put some light on this.

RTF & PDF output can't be exact same, we can minimize the difference by eliminating all extra spaces(Ex: from table rows, in between form fields etc.) from RTF while generating RTF output.
For reference:
BUG:8662322 - RTF FORMAT DOES NOT SHOWS WITH FIXED HEIGHT OF ROW
Thanks,
Sandeep

RTF output not consistent with the PDF output

Hi Experts.
i would like to know why the code start@last-page works in pdf format but do not works if i generate the report in rtf format.
Thanks in advance!

RTF & PDF output can't be exact same, we can minimize the difference by eliminating all extra spaces(Ex: from table rows, in between form fields etc.) from RTF while generating RTF output.
For reference:
BUG:8662322 - RTF FORMAT DOES NOT SHOWS WITH FIXED HEIGHT OF ROW
Thanks,
Sandeep

Default time zone not matching with system time zone

We have a windows 2008 server machine, whose time zone is (UTC-05:00) Eastern Time (US & Canada).
I have run a java class file on this mechine, but its not taking the default time zone as UTC-05:00,instead of that its taking GMT, and shows the time in GMT itself.
We are using jre1.5.0_09
import java.util.Date;
import java.util.TimeZone;
public class testing {
     public static void main(String a[]) {
          System.out.println(" current Date - "+new Date());
          System.out.println(" current TimeZone - "+TimeZone.getDefault().getID());
}giving results..
current Date - Wed Aug 04 14:17:01 GMT 2010
current TimeZone - GMT
but actual time on the machine showing is Wed Aug 04 10:17:01 on UTC-05:00
Can any one help in this please...
Edited by: david_david on Aug 4, 2010 2:10 PM

david_david wrote:
We have a windows 2008 server machine, whose time zone is (UTC-05:00) Eastern Time (US & Canada).
I have run a java class file on this mechine, but its not taking the default time zone as UTC-05:00,instead of that its taking GMT, and shows the time in GMT itself.
We are using jre1.5.0_09
import java.util.Date;
import java.util.TimeZone;
public class testing {
     public static void main(String a[]) {
          System.out.println(" current Date - "+new Date());
          System.out.println(" current TimeZone - "+TimeZone.getDefault().getID());
}giving results..
current Date - Wed Aug 04 14:17:01 GMT 2010
current TimeZone - GMT
but actual time on the machine showing is Wed Aug 04 10:17:01 on UTC-05:00
Can any one help in this please...
Edited by: david_david on Aug 4, 2010 2:10 PMI don't know why its doing that but you can easily change the default time zone to whatever you want using TimeZone.setDefault(TimeZone.getTimeZone(String ID)).

APIC calibration not consistent with PM-Timer

Similar Messages

Maybe you are looking for