APIs under Linux!

I'm writing application to call API under Linux using JNI, but i can't file API (file .h) to perform. My particular problems, this is APIs to dial-up under Linux. Help me!
Thanks!

I'm writing a application to dial up under linux using JNI, but i can't find what API under linux to perform.
Thanks your idea!

Similar Messages

Analog Triggering and Interrupt generation on the PCIe-6320 under Linux

We would like to use the analog triggering functions of the PCIe-6320 under Linux to time tag external events.
I have no experience with the MH DDK but have been told this is what we would need to implement the functions we want. We plan on using Fedora Linux and we are targetting kernel 2.6.31 with the PREEMPT_RT patch applied. We may consider slightly more recent kernel versions. The PREEMPT_RT patch is used to greatly improve determinism in the system and get real-time responses to some external events.
Here is what we wish to do in more details:
We wish to route at least two analog inputs to the comparator, then route the output of the comparator to a digital input which in turn would create a PCIe interrupt. The interrupt software handler would than time tag that event for our application purposes. We need the comparator threshold to be software programmable in level and slope. We are also interested in using the Watchdog Timer feature of the board.
Our application is written in C/C++.
Would the above be feasible? Please provide comments and instructions how we should address our requirement.
Thanks!

Patof wrote:
I am not familiar with the MHDDK. I would like to have an idea of the effort required to implement the functions I have described using MHDDK on Linux. Like I mentionned, we plan on using Linux kernel 2.6.31 with the PREEMPT_RT patch. Could you provide comments on that matter? I need to evaluate the amount of time I will need to spend to deploy and use MHDDK for the PCIe-6320.
There are two factors to consider when writing a driver for your specific application:
Using the deterministic kernel API calls
Writing to the device registers to
Control the watchdog timer
Configure the analog comparator
Manage the analog subsystem state as trigger events occur
Handle device interrupts
The MHDDK for X Series offers the following behavior out-of-the-tarball:
A Linux kernel module using the standanrd kernel and PCI subsystem calls
Mapping device registers to user-mode for access
Demonstrating/documenting how to
Control the watchdog timer (dioex6.cpp)
Manage the analog subsystem state as trigger events occur (aiex2.cpp, aiex4.cpp)
Handle device interrupts (reference manual only)
There are two notably missing pieces and one item to consider:
Missing: deterministic kernel API calls. If you decide to use the nirlpk module, you would need to change it from the standard interfaces to the deterministic variants.
Missing: configuring the analog comparator. You will need to implement this with additional insight from this discussion board.
Consider: if your application requires device access from kernel-mode only, you would not be able to use the MHDDK's C++ classes that perform device programming but would need to implement register programming in C.
To estimate the time for these three, here are my recommendations:
Review the nirlpk.c source file to understand how device access and DMA buffers are implemented and mapped to the user-mode application.
Beware that operation-specific programming help (as you would need for analog triggering) typically requires two weeks for a complete response.
Review the ChipObjects in the MHDDK distribution to understand how register addresses, widths, and bit fields affect device programming.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

Java Sounf Api in Linux

Hi!
I have a question about Java Sound Api on Linux! I have servlet that used JSA. Under Windows OS it working fine, but under Linux i can't record sound and playback it!
Anyone have experience with Sound Java Api on linux???
Sorry for my English!

look at http://www.rxtx.org/

Cannot start Cube Viewer under Linux

The following bug was found for Windows platform.
Do anyone have the patch for LINUX- SUSE. I have got the same problem under Linux but the patch is used for Window but it isn't any pacth for Linux there.
The below description ist the same as for UNIX.
fact: MS Windows NT
fact: MS Windows 2000
fact: MS Windows XP
fact: Oracle OLAP Server 9.2.0.1.0
fact: Oracle Enterprise Manger 9.2.0.1.0
symptom: Olap Cube Viewer cannot be started
symptom: An empty error window with a fire alarm symbol is displayed
cause: Running Oracle 9.2.0.1.0 Enterprise Edition with the OLAP option on
MS Windows.
In Oracle Enterprise Manager Console:
1. Startup the 9.2.0.1.0 Relational Database System.
2. In Enterprise Manager: Select subtree Warehouse + OLAP + Cubes + SH
3. Right-click on the COST_CUBE and select CUBE VIEWER from the popup menu.
Minimize the Oracle Enterprise Manager Console window to see the window that
is opened in the background. It says: "No materialized views have been
created for this cube ... Do you want to continue viewing the cube?"
=> select button "Yes".
Then the Oracle Enterprise Manager Cube Viewer starts loading. An error
window with a fire alarm symbol and with an OK-button appears. There is no
window title or error text displayed in the window.
Selecting the OK-button will close the cube viewer window and the 9.2.0.1
RDBMS instance is no longer running.
fix:
This problem is handled in <bug:2407685>
Apply the following 9.2.0.1 Oracle OLAP patch like described in the patch
readme file and reboot the machine (always create a backup before applying a
patch):
Patchnumber: 2323002
OLAPI API FAILS ON WINDOWS 2000 & XP
Product:Oracle OLAP Version:Oracle 9.2.0.1
Platform:MS Windows NT/2000/XP Server
To download the patch login to http:
//metalink.oracle.com
Select button "Patches", enter the Patch Number 2323002 and select
the "SUBMIT" button.
Thanks in advance for your help.
Mehdi

Patch/one-off 2323002 is not an issue with Linux. It addresses a bug on Windows 2000 & XP. Note that the Cube Viewer currently does not work with the SH Cubes. In short, there is an issue with support of denormalized snow flake schema. This will be fixed for Linux once the upcoming 9.2.0.2 patch set is released on MetaLink around Oct 4th.
Cube Viewer does require that the OLAPI jar files located in $ORACLE_HOME\olap\olapi\lib be the exact same version as the Database Server. So you may have to update the OLAPI jar files on the machine that is running Cube Viewer. Download from the Database Server the correct express*.jar file and copy it to the OLAPI lib directory. Another thing, you may be running into the bug where CV hangs while writing to the log file. To fix this problem, please email me and ask for the Cube Viewer zip. I'll send you some files and intstructions.

Accessing the Admin API via Linux (and hopefully Python)

I have been looking through the available documentation and past forum
entries but I see nothing really on point.
It is possible to have a complete GW system on Linux, from server to
client. So if it is possible to administer a GW system from Linux using
Console One, it should be possible to access the API from Linux.
Can anyone point me towards the appropriate documentaion? Thanks
Bob

Bob Brandt wrote:
> Michael Bell wrote:
>> Yes, but there is no admin API exposed for Linux. Period.
>>
>> SOAP can do message store or address book related stuff. And some client
>> option stuff. It cannot create/delete/rename users, or do most things
>> Admin API (Win32 only) can do.
>
> That is very disappointing. So even though I can have a completely
> non-M$ system, pride myself on not sending a cent to Redmond; Novell is
> forcing me to use their competitor's (M$) inferior OS. Even the GW API
> Gateway is not really supported anymore!
>
> Thats seems stupid and udderly backwards, in other words typically Novell!
>
> Bob
All a matter of resources, Bob. They've had an admin api under
development for years, just didn't have time to make it ready for Bonsai.
You are correct, however you must have a win32 box (or try wine, but I
doubt that's worth it). One friend of mine then wrappered the whole
thing in a SOAP service, so he could mostly avoid thinking about windows.

Preferences API plus Linux. Saving entries system wide.

Hi:
I hope you know a little more about this than I do:
I want to (one time) write a key-value pair into the Registry (Windows) / the according xml file (Linux).
Since this entry should be available for all users, I used the following line to save it system wide:
Preferences prefs = Preferences.systemRoot().node(this.getClass().getName());
In the Windows Registry it can be found here:
HKEY_LOCAL_MACHINE/ SOFTWARE/JavaSoft/Prefs
Under Linux the prefs.xml file which contains the key value pair can be found here:
/etc/.java/.systemPrefs/_!':!.../prefs.xml
But, in order to create this file under Linux I had to temporarily change the access rights of the directory "/etc/.java/.systemPrefs" plus the two files inside this directory (".system.lock" and ".systemRootModFile") to 777.
Afterwards I executed my Java program which set the entry I am talking about.
At the end I set back the access rights of the ".systemPrefs" directory plus the two files mentioned above.
The file prefs.xml has the following access rights:
-rw-r--r--
So, everyone has at least read access (which is great).
My question:
- Since other people should use this program in the future too: is there an easier / better way to set system wide preferences?
For an answer thank you very much in advance.
Joey

Hi jschell:
Thank you for your answer.
The way you describe it is exactly how it is done till now.
My task is to find out the way to do it using the Properties API plus solving potential problems (like the one described above).
I just took a look at my question again. I wrote "Since other people should use this program in the future too: is there an easier / better way to set system wide preferences?".
What I wanted to ask is: "Since other people should install this program in the future too, is there an easier / better way to set system wide preferences (by using the Properties API)?"

Problems capturing audio under linux

Hello. I have developed an application that captures audio using the Audio API of JFM. The problem is when I start capturing audio under Linux (all the audio devices are well configurated), the JVM returns the following error:
java.lang.IllegalArgumentException : Illegal request to write non integral numbre of
frames (13107 bytes)
The piece of code that causes the error is :
while(!stop) {
numBytesRead = inputLine.read(data,0, data.length); bufferoutput.write(data,0,
numBytesRead); }
where inputLine is a TargetDataLine.
Under Windows this runs OK. Anyone know why not under Linux?
Thanks

Hi!
I'm developing a videoconferencing application on Linux and I can't
capture audio; I get messages like these: "couldn't initialize audio device"
or " or "java.io.IOException: Cannot open audio device for input." from JMStudio.
Have you got any idea about the problem ?
Thankyou.

FileSystemView.getSystemDisplayName() under Linux

HI,
i'm trying ti get the description of a filetype under Linux (Ubuntu: 7.10).
Under Windows the call of FileSystemView.getSystemDisplayName(new File("test.txt")) will return "Textdocument" (or simliar...)
under Ubuntu Linux nothing (null) is returned.
Any idea how to get the DisplayName under Linux?
Tia, aumaster

Based on what the method's API doc says is returned,
the file type description as it would be displayed by a native file chooser or null if no native information is available.
It would seem that no native information giving this is available.

Java running under linux with crontab

I'm having a problem:
i want to run a java program under linux with crontab.
my classes are in a directory and aren't in a package. i run em by invoking ./start which is a small script that i wrote. The script is in the same dir as the classes and invokes java by "java Main >>logjava.txt " but this doesn't seem to work all i get is an empty logfile
i need to run the program every day at 0800 so i inserted the following in crontab:
0 8 * 1-5 /var/"path"/start > logjava (where path is the path to the classes dir)
if i run the cmdline from anywhere on the prompt i get the result i want. I think it's because the cron runs it from the root dir thus making java unable to find the classes
Any suggestions would be welcome. or can some1 tell me how to make linux executables from the java (i usually use jsmooth for the windows exe)

You can execute several commands in the process started by cron. You separate them using semicolons.
Have you tried a cron entry like this:
0 8 * 1-5 cd /var/"path";pwd;echo $PATH; ./start > logjavaOr, you may need to make sure the process started by cron gets the same environment as your interactive shells do, by explicitly loading your setup or .login scripts:
0 8 * 1-5 . $HOME/.setup;cd /var/"path";pwd;echo $PATH; ./start > logjava

JMF code working under linux but not windows XP

Hello everyone,
I'm currently working on a nice cross-platform project involving sound producing. I decided to take a look at JMF and test it a bit to know if its features can suit me. I tried to make it works under windows, using a very simple sample of code. The system seems to play the sound as some console output detects the start and the end, but all i hear is a very short noise ( 1/2second ) like a "CLIK" and nothing else. I tested the code under linux, using the same computer and it works just fine, playing the same wave nicely and entirely.
some info:
-i used the cross platform JMF, no performance pack ( i tried it , but still no result )
-the code just opens a file dialog and plays the selected file
-the selected file was always a very simple .wav
-i did not use system classpath variables because i don't like it, i rather use local classpath ( which works fine too, no doubt about it )
-i tested this little soft on 2 other computer using windows XP, and still got the same result.
Please, have you got an idea about what's going on ?
Thanks a lot for any answer!
Maxime - Paris . France
Code Sample:
import java.io.File;
import java.io.IOException;
import java.net.MalformedURLException;
import javax.media.*;
import javax.swing.JDialog;
import javax.swing.JFileChooser;
import javax.swing.JOptionPane;
public class JMFSound extends Object implements ControllerListener {
     File soundFile;
     JDialog playingDialog;
     public static void main (String[] args) {
          JFileChooser chooser = new JFileChooser();
          chooser.showOpenDialog(null);
          File f = chooser.getSelectedFile();
          try {
               JMFSound s = new JMFSound (f);
          } catch (Exception e) {
               e.printStackTrace();
     public JMFSound (File f) throws NoPlayerException, CannotRealizeException,     MalformedURLException, IOException {
          soundFile = f;
          // prepare a dialog to display while playing
          JOptionPane pane = new JOptionPane ("Playing " + f.getName(), JOptionPane.PLAIN_MESSAGE);
          playingDialog = pane.createDialog (null, "JMF Sound");
playingDialog.pack();
          // get a player
          MediaLocator mediaLocator = new MediaLocator(soundFile.toURL());
          Player player =     Manager.createRealizedPlayer (mediaLocator);
player.addControllerListener (this);
player.prefetch();
player.start();
playingDialog.setVisible(true);
     // ControllerListener implementation
     public void controllerUpdate (ControllerEvent e) {
System.out.println (e.getClass().getName());
     if (e instanceof EndOfMediaEvent) {
               playingDialog.setVisible(false);
               System.exit (0);
Message was edited by:
Monsieur_Max

Hello everyone,
I'm currently working on a nice cross-platform project involving sound producing. I decided to take a look at JMF and test it a bit to know if its features can suit me. I tried to make it works under windows, using a very simple sample of code. The system seems to play the sound as some console output detects the start and the end, but all i hear is a very short noise ( 1/2second ) like a "CLIK" and nothing else. I tested the code under linux, using the same computer and it works just fine, playing the same wave nicely and entirely.
some info:
-i used the cross platform JMF, no performance pack ( i tried it , but still no result )
-the code just opens a file dialog and plays the selected file
-the selected file was always a very simple .wav
-i did not use system classpath variables because i don't like it, i rather use local classpath ( which works fine too, no doubt about it )
-i tested this little soft on 2 other computer using windows XP, and still got the same result.
Please, have you got an idea about what's going on ?
Thanks a lot for any answer!
Maxime - Paris . France
Code Sample:
import java.io.File;
import java.io.IOException;
import java.net.MalformedURLException;
import javax.media.*;
import javax.swing.JDialog;
import javax.swing.JFileChooser;
import javax.swing.JOptionPane;
public class JMFSound extends Object implements ControllerListener {
     File soundFile;
     JDialog playingDialog;
     public static void main (String[] args) {
          JFileChooser chooser = new JFileChooser();
          chooser.showOpenDialog(null);
          File f = chooser.getSelectedFile();
          try {
               JMFSound s = new JMFSound (f);
          } catch (Exception e) {
               e.printStackTrace();
     public JMFSound (File f) throws NoPlayerException, CannotRealizeException,     MalformedURLException, IOException {
          soundFile = f;
          // prepare a dialog to display while playing
          JOptionPane pane = new JOptionPane ("Playing " + f.getName(), JOptionPane.PLAIN_MESSAGE);
          playingDialog = pane.createDialog (null, "JMF Sound");
playingDialog.pack();
          // get a player
          MediaLocator mediaLocator = new MediaLocator(soundFile.toURL());
          Player player =     Manager.createRealizedPlayer (mediaLocator);
player.addControllerListener (this);
player.prefetch();
player.start();
playingDialog.setVisible(true);
     // ControllerListener implementation
     public void controllerUpdate (ControllerEvent e) {
System.out.println (e.getClass().getName());
     if (e instanceof EndOfMediaEvent) {
               playingDialog.setVisible(false);
               System.exit (0);
Message was edited by:
Monsieur_Max

Loss of keyboard focus in Java appl running under linux

I have a small sample program that replicates my problem. When this program is run a window is created. If you select File->New another instance of the program window is created. Now if you try to go back and bring to front the first window, keyboard focus is not
transferred when run under linux. You can only type in the second window. The expected behavior does happen in Windows.
> uname -a
Linux watson 2.6.20-1.2933.fc6 #1 SMP Mon Mar 19 11:38:26 EDT 2007 i686 i686 i386 GNU/Linux
java -versionjava version "1.5.0_11"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_11-b03)
Java HotSpot(TM) Client VM (build 1.5.0_11-b03, mixed mode, sharing)
javac -versionjavac 1.5.0_11
import java.awt.event.*;
import javax.swing.*;
class SwingWindow extends JFrame {
    SwingWindow() {
     super("SwingWindow");
     JMenuBar menuBar = new JMenuBar();
        JMenu fileMenu = new JMenu("File");
        JMenuItem newItem = new JMenuItem("New");
        newItem.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent event) {
          SwingWindow.createAndShowGUI();
     fileMenu.add(newItem);
        menuBar.add(fileMenu);
        setJMenuBar(menuBar);
        setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
     JTextField text = new JTextField(200);
     getContentPane().add(text);
     pack();
     setSize(700, 275);
    public static void createAndShowGUI() {
        JFrame frame = new SwingWindow();
        frame.setVisible(true);
    public static void main(String[] args) {
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}

You can implement the FocusListener interface. When
the first JFrame gains focus, call
text.requestFocusInWindow(). I hope this helps.The call requestFocusInWindow is not helping, perhaps even making it worse.
The problem seems to be that I am in the situation where the call
KeyboardFocusManager.getCurrentKeyboardFocusManager().getPermanentFocusOwner()
is returning the expected Component. The problem is that the KeyListener class that is registered with the Component is not being called when a key is being pressed.
The issue is that I have a component that has the keyboard focus, but the KeyListener class
is not responding.
This seems to be a linux only problem which makes it only mysterious.

How to enable OCR with Scangear MP under Linux for MG8250?

Under Linux openSUSE 12.3 I use Scangear MP 1.80 for my Canon PIXMA MG8250.
As a scan target (in my German GUI it's "Ziel") I can choose "OCR". But there is no text output, the scan is just saved as a picture. How can I configure Scangear to open the scan via Tesseract in a text editor.
By the way, the target "Print" (in German "Drucken") leads to saving just as well, though there is at least one printer at hand, of course.
It's a pity that the pixma scan drivers that are shipped with openSUSE don't work with xsane (the scanner starts working, but stops after one third of the page). Using xsane with a different scanner I can use OCR successfully.
Volker

There are two basic types of core OCR algorithm, which may produce a ranked list of candidate characters.
Matrix matching involves comparing an image to a stored glyph on a pixel-by-pixel basis; it is also known as "pattern matching" or "pattern recognition". This relies on the input glyph being correctly isolated from the rest of the image, and on the stored glyph being in a similar font and at the same scale. This technique works best with typewritten text and does not work well when new fonts are encountered. This is the technique the early physical photocell-based OCR implemented, rather directly.
Feature extraction decomposes glyphs into "features" like lines, closed loops, line direction, and line intersections. These are compared with an abstract vector-like representation of a character, which might reduce to one or more glyph prototypes. General techniques of feature detection in computer vision are applicable to this type of OCR, which is commonly seen in "intelligent" handwriting recognition and indeed most modern OCR software. Nearest neighbour classifiers such as the k-nearest neighbors algorithm are used to compare image features with stored glyph features and choose the nearest match.
Software such as Cuneiform and Tesseract use a two-pass approach to character recognition. The second pass is known as "adaptive recognition" and uses the letter shapes recognized with high confidence on the first pass to better recognize the remaining letters on the second pass. This is advantageous for unusual fonts or low-quality scans where the font is distorted.
So I wonder which kind of OCR algorithm are you using?

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

Cannot install JMF under Linux Mandrake 10

I simply cannot install JMF under the Mandrake 10 Official Linux distribution. I downloaded the jmf-2_1_1e-linux-i586.bin file and tried to execute it as root. It unzipped some files then showed me an error message about AWT and GTK+. I found a hack consisting of modifying the .bin file to have the PATH variable point to SUN JDK, the error does not show up, but the installation still does not work. In fact, the installation works, but the Diagnostics applet keeps telling me than class files are not present. My Mozilla 1.6 Java plugin is working and displaying the applet. My JMF lib directory does not contain sound.jar, such jmf.jar. I set the CLASSPATH and LD_LIBRARY_PATH according to the readme.html file. I would like to know if it is a compatibility problem with Mandrake 10, the 2.6 kernel or if JMF just DO NO work under Linux. In the latter case, JMF is a violation to the Java portability philosophy and I would never use it on my own initiative, just if I were asked to.
After the files are unzipped, I have the following warning and error messages.
Warning:
Name: HorScrollBar
Class: XmScrollBar
The specified scrollbar value is greater than the maximum
scrollbar value minus the scrollbar slider size.
JavaSound Capture Supported = true
JavaSoundAuto: Committed ok
java.lang.Error: Can't open video card 0
java.lang.Error: Can't open video card 1
java.lang.Error: Can't open video card 2
java.lang.Error: Can't open video card 3
java.lang.Error: Can't open video card 4
java.lang.Error: Can't open video card 5
java.lang.Error: Can't open video card 6
java.lang.Error: Can't open video card 7
java.lang.Error: Can't open video card 8
java.lang.Error: Can't open video card 9
Done.
Even if I do not have a working video capture card (I have an ATI All-in-Wonder 128 but it is not working under 2.6 kernel), JMF should work because some people do not have a video capture card. I also tried with the cross-platform ZIP file, but this one does not contain sound.jar either and the Diagnostics applet keeps complaining about missing class files. I tried to search on the Web for solutions to this problem or for a way to change the CLASSPATH used by the Mozilla Java plug-in (if it uses a different CLASSPATH than the one from the environment variable), but nothing, nothing. Is there a distribution from which JMF would work better than Mandrake 10? Or can JMF work only under Microsoft Windows or Sun Solaris? I also tried Blackdown, but a README file directed me to the Sun's page, nothing to download here about JMF.

well, your not the only one.
I have it working in Debian, and JDS.(JMF is setup automatically in JDS).(2.6.6 kernel)
I looked at the installation structure of JDS, and was able to duplicate what they did for Debian.
Maybe it will work for Mandrake two??
ok, all you have to do is copy or create soft links from your Mozilla directory, just like you did with the java plugin, and link to all the *.so files in JMF-2.1.1e/lib directory.
Should work.
I also read that not haveing the native files only matters if you are doing Capture. not play.
to get your ATI All-in-Wonder 128 to work, make sure you install the correct driver, and have it working under linux, then try it in JMSTUDIO

Failed to install enterprise manager under linux

When I installed Oracle 10g(10.2.0.1) under linux, I got an error when running
/ora01/db/oracle/product/10.2.0.1/bin/emca within oracle universal installer.
The emConfig.log file shows such error:
oracle.sysman.emcp.exception.EMConfigException: Invalid value null for parameter PORT
at oracle.sysman.emcp.ParamsManager.checkParam(ParamsManager.java:2630)
at oracle.sysman.emcp.EMDBPreConfig.checkConfigParams(EMDBPreConfig.java:1285)
at oracle.sysman.emcp.EMDBPreConfig.checkParameters(EMDBPreConfig.java:1060)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:174)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
So I have to run emca after the oracle installation. I am new to this tool. I modified both tnsnames.ora and listener.ora file to set port to 1521. And then I run emca -config all db,
but now I cannot pass "entering the password for SYS user" (I already set SYS user's password to oracle, and it works when using sqlplus.) .
I am totally confused. What should I run emca to set up the enterprise manager's website? Now I can use localhost:5560/isqlplus and localhost:5560/isqlplus/dba.
Many thanks!!

I just run emca as oracle instead of root, then the password got passed, but I got new errors:
Aug 30, 2007 5:59:59 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
What should I do? Is running emca -config all db necessary to get enterprise manager installed?

APIs under Linux!

Similar Messages

Maybe you are looking for