Aple TV led blinking (it was working)

Hi,
I used my Apple TV 3rd Gen. yesterday, today when I look at the device the led light is blinking and the nothing shows up on the TV.... I removed the ac cord and put it back, but I only see the apple logo.
Also, I tried to connect using a microusb to my computer + the apple tv ac cord, but iTunes does not recognize it....

Make sure you follow the instructions to the letter...
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support
Also, some micro USB cords are for recharging only, and as such only carry power. Make sure your micro USB cord is capable of transferring data.

Similar Messages

I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help

I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .

Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out.

FP-1600 Status LED blinks 17 times.

My FieldPoint bank has 9 modules. I previously had a problem with the FP-TB-10 power and ready lights blinking, but that was because one of my dual-channel modules was not seated correctly. Now the status LED is blinking 17 times. The manual says to contact NI about this. The FieldPoint Explorer seems to find all of the modules correctly, though. Anyone know what's up?

Aaron,
I checked the firmware and the FieldPoint Explorer version, and I'm using 3.20 and 3.0, respectively. When I power cycle the FP-1600, the 17 blinks of the status LED go away. Communication works, and all of the devices are found. However, communication does drop out from time to time, and eventually the status LED begins blinking 17 times again.
A possibly related issue is that the FP-AI-V10 dual-channel module that I have plugged into slot 2 of the FP-TB-10 base causes the FP-TB-10 to flash its power and ready LEDs. Re-seating the FP-AI-V10 seems to fix this, although the module is definitely already clicked into place when I see this problem. Upon reseating (or just pressing on it without removing the module), the FieldPoint Explo
rer program finds this module.
I'm tempted to think that this issue with the FP-TB-10 and FP-AI-V10 are unrelated to the FP-1600's status LED blinking 17 times because even with the FP-TB-10 removed from the bank, I still get the flashing LED.
Any ideas? Also, what is a GPF type error?
Thanks,
Jake

BlackBerry 8110 does not initialize only LED blinks for 5 secs

Hi all,
I bought a used BlackBerry 8110. It worked fine in the beginning - then during some audio recording I suddenly got an hourglass cursor and the handy was frozen.
Removing the battery - even for 24h - did not help. The moment I put in the battery the LED starts shining for approx. 5-6 secs, then it extinguishs for 2-3 sec, and so on. Thats all what happens. The display remains black.
I also tried to re-install the complete device operating system but without any success. But when installing the OS the ApploaderWebSL-Upgrade.msi was able to communicate with the handy and determines the installed software components and versions. Also the LED blinking stopped (LED was off) and the Apploader was able to delete all software installed on the device and write the new software. When that finishs and the Apploader tries to initialize (reboot) the handy the blinking described above starts again but the handy (and display) remains off.
Does anyone have an idea what to do ???
Any help is appreciated !!!
Thanks a lot,
Katja

try this
Solution number 1
http://blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
Solution number 2
http://blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
Good Luck

Satellite A10: Battery-LED blinks with AC

Not too long ago I bought a new battery for my notebook. About a half year it worked well. But one day I couldn't start the notebook without AC. I thought, the battery was simply discharged. So I set up the AC-adapter, but the next time, the notebook didn't start either. With AC no problem.
So I charged the battery, and when Windows said, Battery Full, and the LED was green, I disconnected the AC. But then, the notebook fully stopped, as if there was no battery.
Now it is this way: it doesn't matter what Windows sais. The Notebook doesn't start without AC. After a disconnection of AC, the battery-LED blinks fastly orange. When windows runs, it only blinks slowly orange.
Where is the problem? Does anyone know a solution?

Hi
In my opinion there are two possibilities.
Either the battery is dead and must be replaced or the notebooks power supply electronic malfunctions.
The first possibility is not serious problem because the battery replacement should helps to solve this issue but if the notebooks power supply electronic does not work properly, the whole motherboard should be replaced.
I think its advisable to contact the ASP in your country because the guys could locate the fault very quickly and could provide the best solution.
Good luck buddy

PSC 1410 shows E and all leds blinking

Hi there everyone!
I'm not an english speaker, but I will try to do my best in order to explain myself as clear as possible. This is the fact, I recently acquired a PSC 1410 a year ago. I know the previous owner bought it on 2006 and it was working properly till a month ago when the tricolor cartridge blew up inside the printer, literally. I turned on the printer and it showed me the Error message and all the panels led were blinking. I disconnected it from the wall outlet. So, I disassembled the printer and it was a mess, there was ink all over the interior, including the circuits board. Then I cleaned everything very carefully, and finally I assembled the pieces back together. When I tried to turn on the printer again I received the same Error message and all the leds blinking.
I've been looking for a service manual on the web or something to solve this, but I was unable to achieve my goal. I can not indulge me and buy another printer, I can not reach HP customer service, and nobody knows how to fix this problem here. Moreover I feel like I have a little kind of affection for this appliance.
Now my question: is this problem fixable? Can I fix it on my own?
Thanks a lot in advance.
CULEBRA83

All lights blinking on the printer would indicate a fatal error situation. Here are couple of things you can try:
1) Perform the steps under the section 'All lights are Blinking' in the document below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00476152
2) Follow the steps in the document below to 'Clean the gold-colored contacts in the print carriage' and cartridge contacts.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00094661
Note: Ensure that the printer is disconnected from power while performing the step.
Hope this helps.
Say thanks by clicking the Thumbs up icon in the post
Please mark reply as "Accept as Solution" if it solved the problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP

U205 s5022 Power LED Blinking

U205 s5022 Power LED Blinks amber color as follows: Blinks 3x pauses Blinks 3x pauses blinks 2x pauses and repeats cycle. Power Adapter checks OK at 19 Volts DC and have installed new battery. Computer still won't start. What could be probable cause of consistent blinking light?

Initial reply led me (thank you) to recheck the power adapter I was using. It turned out it was for 19 volts DC and this lap top only takes 15 volts DC hence the blinking lights. After replacing the CMOS battery and tinkering with other stuff (which I later learned were unnecessary but educational) like the motherboard, reseating CPU heat sink etc. - the unit is now working but will just stay idle because I have been a MAC person for many years now.

G72-B61NR Laptop screen black;Num & Caps locks blinks; Hard Drive works fine

Hello everyone! I would like to get a solution to a problem I've been having with my laptop; if no solution, then a reason for my problem would be great. My laptop has recently stopped booting up correctly. Basically the screen is black and will not turn on. The NUM LOCK and CAPS LOCK LED lights flash a number of times before the computer shuts down. When I turn on the computer I can hear the fan and the hard drive running but no screen. I have been able to take out the hard drive from the laptop in hopes of salvaging important documents and I was able to do so by connecting it to a desktop. Is there anyway to fix my screen and save my laptop? Thank you in advance for any help.

Hello soTERRAble, welcome to the HP Forums.
I see that you have a blank display with your notebook. I will try to help you with this.
From what you describe this could be indicating that something in the notebook is not working correctly, right now I wouldn't be able to tell you what but can provide you two documents that might be able to identify what.
Computer Does Not Start and the LEDs Blink or the Computer Beeps - this document may be able to assist you with the flashing LEDs your getting when trying to start the notebook. Watch to see if you can identify an error pattern. If you can compare it to the table in that document. This will provide an idea to what may be failing.
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot - if the above document could not direct you to something failing, then follow this one.
Let me know where the above documents lead you.
Thank you for posting on the HP forums.
I worked on behalf of HP.

WRT54GL - Power Led blinking after unsuccessful flash-attempt

Hi there, I wanted to flash my wrt54gl with some other version of dd-wrt firmware. There was another dd-wrt image on it before the flash, but when I chose to "upgrade" the firmware, the router hung with power led blinking and the SES button active. So I aborted the flash with a powercable-unplug, and plugged it in again. Since then the router doesn't start up any more. I don't get an IP via DHCP, with static configured IP 192.168.1.2, pinging 192.168.1.1, I get a response, but I can't get to the web interface again. I tried the 30sec Reset-trick, didn't work out. I tried to upload the original Linksys firmware via the Linksys TFTP-tool, which didn't work out either. U got some other clues, what I can try to get my wrt54gl back alive again? greets gothic5k

Hey try resetting the router reset button in such a way that power
light is blinking on the router & then do a complete network power
cycle i.e., unplug the power cables from the modem & from the router &
then plug in the power cable to the modem first once all the lights are
solid green you could plug in the power cable to the router & check out
it will definately work!!

Neo4 does not POST (Power cuts + 3 second Power LED Blinking)

Hi,
This is my first build and I have already been plagued with 2 problems. First, I finished the build and ran for one night and then the PSU went bad and needed to be replaced (replaced with same model). Now, after running fine for about two weeks, the system shutdown over night and won't restart. No activity should have been happening overnight. When I try to start the system, the fans and everything start for about one second and then stop. The power LED begins to blink every 3 seconds and no power is given to the system. The D-bracket does not have any lights showing, they go out after the first second of running. Here is what I have tried so far:
1. Tested power supply on second system and it worked fine.
2. Removed the motherboard from the case and set it on the static bag it came in. Then with only the video (with it's power) and the two MB power cables connected, I tried to boot the system. The same problem occured, power off after 1 second and LED blinks.
3. Bought a new PSU (Mad-Dog 500W which has +12V/30A) and still the same problem.
4. Removed each RAM module and tried with just one stick, still the same problem.
So I think I the only things left are MOBO and CPU... I would think if it was the CPU, I would get a signal from the D-Bracket. Any help?
Thanks in advance!

Quote from: Deathstalker on 12-April-05, 00:14:59
I would try removing the Power Cord from the Power Supply and the Battery from the mobo. Leave them out a good 15 to 20 minutes before putting them back.
If that does not work, try a different brand of RAM for testing purposes.
Deathstalker,
Thanks for the suggestions. I tried removing the battery and power for 15 minutes and replacing, but no luck, same problem. This system was working for two weeks with the PQI RAM modules. Can this compatability change all of a sudden while running and just power down the system?

LED blinks upon switching on, system doesnt boot up!!!

I have HP Pavilion dv4 1225dx laptop
While switching on LEDs located near caps lock and num lock are blinking, without any beep sound. At the same time, the exhause fan runs. But the system doesnt boot up. The LED blinks continously, with out stopping. Time to time the system boots up and i was able to work normally, still with blinking LED signals.
To note, i dont see anything in the screen and i tried with alternative screen, but the situation remains...
I checked in the Hp support, which conveys the problem in the CPU. but I was able to login my system even after this problem.
So im not sure my CPU is having a problem.
Before this issue, there used to be a message while switchign on about replacing the internal battery. This i havent done yet. Im suspecting this issue.
Also, recently i cleaned the exhaust windows using an air gun.
Presently, My system is working on windows 8 OS.
I hope to have answers to my problem
Thanks in advance

Thanks for the reply!
But how to overheat the system.
I tried leaving it on for at least 7-8 hrs, then sometimes it starts and not sure about all the time.
Moreover how to switch off the fan to overheat the system.
Anyway both suggestions will take time to switch on, is there any instant solution???
thanks in advance

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. It was working fine now I cant get it to output to the Tv. Any ideas?

My Macbook pro no longer outputs to my vizio led tv. It was working fine now I cant get any picture. It just says no signal. It is not the hdmi or the adapter because it works fine with my other tv. Any ideas on how to resolve this would be greatly appreciated. Please be as specific as possible. Thanks. BTW--I am using the mini dvi to hdmi adapter in case that was unclear.

Since you say that the same connectors work on your other TV is suggests that the fault is not in the connectors but your Vizio TV. I would check the settings on the Vizio TV. Verify that is is set to receive HDMI input. Perhaps you or some one else has inadvertently changed them. Pressing the wrong buttons on a remote control device can do that. (I am assuming no changes were made in SYSTEM PREFERENCES>DISPLAYS)
Ciao.

Probook 4540s charging led blinking

My charging led blinks and the laptop won't power on
This happens if i connect the charging jacks(without the battery) in the following order: 1st insert in the laptop 2nd in the outlet, If i do it backwards, first in the outlet then i connect the charging jack to the laptop it works fine, It bothers me that every time i have to dissconect the charging jack from the laptop and plug it in after i ve plugged the plug in the outlet. I have 2 friends with same laptop and they don t have this problem.

Hi mihailgreceanu,
Your Probook 4540s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red, what is this? it isn't in the manual

CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red in a pattern, red off then red red, Our AP isn't working it won't show up on our Cisco WLC 2125 anymore and this is the LED indicators, I've checked in the manual and this combination of LEDs do not exists??

No cisco web is working perfectly.
do you have a valid CCO id with smarnet contract ?? then only you can download new IOS for AP:
Autonomous AP image:
http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=284180979&release=12.4.25d-JA2&relind=AVAILABLE&rellifecycle=ED&reltype=latest
LAP AP image:
http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=280775090&release=12.4.25e-JAP&relind=AVAILABLE&rellifecycle=ED&reltype=latest
Regards

After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity. Right before i installed additional content I was working on a project, and everything was OK.

After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity.
Right before i installed the additional content I was working on a project, and everything was OK. What is wrong. How do I make Logic reconnect to the instrument files?

Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

Aple TV led blinking (it was working)

Similar Messages

Maybe you are looking for