Aplication Error - Restart not possible

HI all,
We are getting CCMS alerts because synchronus messages that failed in the processing, the problem is that we are getting everything alerts for the same failed messages. I wonder if there is any way to cancel those messages to avoid received that CCMS alerts.
Any help will be appreciated.
Thanks
Ivan

Hi, Ivan.. ::)
Maybe this can help.
Continuous CCMS alerts on failed synchronous messages
Regards.

Similar Messages

  • System Error- Restart Not Possible

    Hi All,
    I have Synchronous scenario.
    I am trying to handle system error in BPM. so if system error comes i m cancelling process.
    So in sxmb_moni, my scenario is successful as it is not getting stuck into queue.
    But it is giving me error as "System Error - restart not possible" .
    But I need to resend / restart this message again.
    So can u please guide me for same
    Regards,
    Manisha

    When your WS id down you are handling the esception in your BPM perfectly....what more you can do is in the exception branch throw an alert to the support team from SAP saying that the processing for a particluar IDOC failed as there was an error while connecting to the end system......in this case you can ask them to restart this particular process once the WS is up....
    One option wil also be to increase the default retry attempts of AE while connecting to the end system....affects performance....maximum retry attempts is 10 (if i am not wrong).....so if your WS comes up during this time you can send the message......
    We have a similar case wherein same logic has been applied in BPM...which asks the support team to restart the process if the process fails due to a communication error with the end system.
    Regards,
    Abhishek.

  • System Error- restart not possible - Error Message in MONI

    Hi,
    Though my flow is running fine. with success flags, there are couple of below error messages.
    System Error- restart not possible
    Message ID D59F2131E30E45E21D5BADCC8C0F8656 for pipeline CENTRAL version 000 already exists in system
    why am I getting these errors..
    Regards,
    Varun

    What was the status of your server (XI/ PI and the receiving application) at the time of processing of these messages? Also check if the payload was sent with all the required information.
    Regards,
    Abhishek.

  • Restart not possible (Xml message)

    Hi All,
    I am facing the following error in SXMB_MONI , restart is not possible & unable to check the payload.
    can any one please let me know what is the cause for it & how to resolve it.
    INTEGRATION_SERVER_PIP  - -
    Sender Component     
    urn:wssprocessorWsd/wssprocessorVi/document -
    sender name space     
    wssprocessorVi_Document----
    Sender Interface                         
    "Current Status"----
    >Version     
    Synchronous----
    >Type
    BE -
    >QOS          
    PROXY----
    Outbound Proxy
    & The Receiver components are Blank.
    Message Status is System Error RESTART NOT POSSIBLE(RED colour Round Button)

    Have you configured Receiver Determination with the appropriate target system and interfaces?  Looks like your target system is down or connectivity errror...
    Go to SXMB_MONI and pick that message and navigate pipeline steps and see where it fails.. Also the steps it fails you check the payload or response mesg and you will see the details of error.
    Also go to RWB and check your communication channel monitoring  area. See any help you get.
    Also go to RWB and go to message monitoring. See the inbound side of the interface and see what is the reason for the error.. Sometime if the receiver comm channel or target system has issue you mesg stop.
    Check SMQ1 and SMQ2 and see any locks for those mesgs. If so remove locks and activate again.

  • System error and restart not possible

    Hi
    I have developed the Proxy to SOAP scenario and it used to work normally as designed, But suddenly it started giving the System error and restart not possible,
    I see the following error in the Runtime work bench on the Receiver CC
    SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
    Can anyone let me know what the error is
    Thanks
    PR

    Hii
    If this channel was in working state earlier, then this error would mean that the receiver webserver hosting the webservice has some problem. You may contact the receiver system for checking out if they have problem at their end and if they agree resend the messages and it should pass through.
    It may be problem with certificates even.
    Best Regards

  • Java Proxies : Restart not possible

    Hi,
    While trying java proxy scenario i am getting the error in moni.
    Restart not possible...also i can see two messages one with Sender (Sending system),receiver (Receiver system)...the other message reverse of it Sender is receiver sys and receiver is sender system.Not able to understand why...
    Help is appreciated
    Regards

    Have you configured Receiver Determination with the appropriate target system and interfaces?  Looks like your target system is down or connectivity errror...
    Go to SXMB_MONI and pick that message and navigate pipeline steps and see where it fails.. Also the steps it fails you check the payload or response mesg and you will see the details of error.
    Also go to RWB and check your communication channel monitoring  area. See any help you get.
    Also go to RWB and go to message monitoring. See the inbound side of the interface and see what is the reason for the error.. Sometime if the receiver comm channel or target system has issue you mesg stop.
    Check SMQ1 and SMQ2 and see any locks for those mesgs. If so remove locks and activate again.

  • Error : Modification not possible- while creating source system in BI7

    Hi BI Guru's,
    We are using BI7 and source system ECC6 ,We are about to move to production, When creating the source system in BI PRD system we getting the Error Modification not possible.we created RFC connection, background user and remote connection works fine.
    Is there any body put some light on this issue
    thanks in advance,
    Regards,
    Mohan

    Mohan,
    Check if your logical systems are in place in SCC4 and also in the transport connection.
    Also check if you are connecting to the source system by IP Address or by logical name.
    Accordingly you would have to maintain the source system connections.
    Arun

  • Document Contains Errors - Approval not possible

    Hi,
    We are having issue in our Invoice Workflow.
    When ever the approver is trying to approve the document, he is getting the error message "Document Contains Errors -> Approval not possible".
    We have verified the document and check for error messages and found the below error messages on the Document.
    E BBP_PD              047 Posting period 006 2011 is not open.
    The document was submitted some time in the first week of December and as part of AP process the posting period will be closed during the first week of every month.  This is a common business case and why is it stopping from posting the doc?
    FYI..this Invoice is posted against the WBS element.
    Pls give some insight on this and how to address the issue.
    Regards,
    Satya

    Hi,
    The posting date in the invoice is referring to the past period which is closed.You will have to change the invoice posting date to current period date and then process.
    Regards,
    Sanjeev

  • Error - Logon not possible; none of the active logon procedures is possible

    Dear Gurus,
    I'm trying to configure SSL with User mapping to SICF service: NWBC.
    -SSL configured with STRUST transaction and I see that it is working via Internet Explorer
    -SICF service NWBC was set to: "Required with Client Certificate (SSL)"
    -User mapping was set like described in this article: https://help.sap.com/saphelp_nwmobile71/helpdata/en/17/1514e9b7eb4f74b0b49327b8f2a662/frameset.htm
    But I get error:
    Logon not possible; none of the active logon procedures is possible
    Any idea ?
    Please advise,
    Dimitry Haritonov

    Hi,
    I would try to check logs first. In transaction SMICM you can set up level of logging for ICF services. So set it up to the highest possible level (this one actually dumps whole content of HTTP request, so maybe that's not necessary) and try logon again. You should get a reasonable info and you can try to figure out why it fails.
    Cheers

  • Archive url access throws error "SSF error: Decoding not possible"

    Hi
    We are using function module HRWPC_RFC_EP_READ_PHOTO_URI to pull the photo of an employee in ESS.
    When we paste the url in browser we get following error
    SSF error: Decoding not possible
    Can anyone help to resolve this.
    regards
    barin

    Barin,
    check these links
           1060613       SSF error, Decoding not possible       
         983550      SSF-Error occurs when viewing attachments of a solution
    https://forums.sdn.sap.com/click.jspa?searchID=17894100&messageID=5942357
    https://forums.sdn.sap.com/click.jspa?searchID=17894100&messageID=6347898
    Thanks
    Bala Duvvuri

  • SSF error: Decoding not possible

    Hi all,
    I need to get the absolute URI from a DOC_ID (TOAHR table), to display an employee photo in the browser.
    I'm trying with the following FM:
    SCMS_AO_URL_READ
    ARCHIVELINK_URL_GENERATE
    but both returns me sy-subrc = 0, the same URL and the same error message:
    "SSF error: Decoding not possible"
    when I'm copying the returned URL in the browser...
    anybody could tell me what's the problem / error?
    Thanks!
    Miguel Angel.

    ok i've got it....
    i used cl_crm_documents=>get_with_url to geht the urls.
    the returning value is cutted in the gui after some chars. thats why copy and past didn't work for me.
    but variable conatains the complete url, althoug the complete url isnt shown on the gui.
    i tried something like this, and it worked:
    CALL FUNCTION 'CALL_BROWSER'
    EXPORTING
       URL                          =  lv_url
    EXCEPTIONS
       FRONTEND_NOT_SUPPORTED       = 1
       FRONTEND_ERROR               = 2
       PROG_NOT_FOUND               = 3
       NO_BATCH                     = 4
       UNSPECIFIED_ERROR            = 5
       OTHERS                       = 6

  • I am getting an error"Deletion not possible, original "

    Hi..
    When i am deleting the file from one of the document number i am getting below error
    "Deletion not possible, original is being used in other documents"
    But for the same document with another version i can delete the file.
    Please help ASAP..

    Hi,
    Whenever a new version of a Document Info Record (DIR) is created or a  DIR is created using another DIR as template, the original files copied  to the new DIR still refers to the source DIR until the file is edited once.(checked out and checked in). This is the standard behaviour,  however there is no option to copy the files for the new DIR at the time of creation, instead of creating files via reference.
    Due to this reference you might face error message during deletion of the original in the new created document info record for example or if you made changes to this original in one version you will see the same changes also in the new version too.
    If you want to break up this reference automatically during the creation process of the new document info record you will find a solution proposal in SAP note 1450267. Therefore BADI DOCUMENT_MAIN01 with method AFTER_SAVE has to be used with the function call in the following way:
    CALL FUNCTION 'CV120_KPRO_RESOLVE_REFERENCE' IN UPDATE TASK
    EXPORTING
    IS_DOKAR = draw-dokar
    IS_DOKNR = draw-doknr
    IS_DOKVR = draw-dokvr
    IS_DOKTL = draw-doktl.
    Hope this answers your query.
    Regards,
    Deepak Kori

  • Error : Access not possible using "null" objects reference

    Hello.
    i am working with a zbapi.
    i called a external email program in this bapi,everything is working fine over here.
    In webdynpro java they mapped my bapi and starting working from there.
    every functionality is working fine but regarding this email stuff it is showing an error as access not possible using null objects reference.
    where could be the possible error.
    is it in webdynpro or in abap side.

    Raghu,
    You are right. When it comes from the WD Java, may be you are not passing any value at all. You can trace it by these ways.
    1. Check it using SE37, make sure everyhting is fine.
    2. Print all the values that you are passing to the RFC in the execute RFC method().
    3. using ST05 transaction in R/3, enable RFC and SQL trace, check what is passing in between web dynpro and R/3.
    Moreover paste your error message here.
    Thanks,
    Raj.

  • CProjects approval error - Signature not possible : no user certificate ex

    When i try to approve the phase in cProjects i get an error which says
    "Signature not possible : no user certificate exist".
    Where exactly do we maintain this certificate because i am not able to change the decision for phase approval.
    I have maintain the person responsible for project role via Organizational mgmt. in PPOCE and BP transactions. I have also specified personnel number and user in the identification tab in BP tcode.
    Please reply asap,
    Pratik.

    The issue is solved.
    1. Specify Personeel number - BP transaction
    2. Specify user name - BP transaction
    Additions made :-
    Specified external reference number - BP transaction
    Also made changes in Phase type settings related to approval where couple of statuses were changed.
    Regards;
    Pratik

  • Error :Reversal not possible; last settlement was in period 008 2008

    Hi,
    One assets was capitalized by wrong settlement  from AUC to  final assets  in last year. But I try to  reverse the WBS through cj88   i am receiving the error message like: Reversal not possible; last settlement was in period 008 2008  Message no. KD547 . The  wbs  status is  Dead.
    could you please guid me how to  rever the wbs incurrent period after re opining the  wbs.
    With regards
    V K

    Is it possible to reverse the settlement done to the final asset from AUC?
    I am using investment profile with summery settlement not line item one....is it possible in my case?
    Kindly let me know...Thanks
    RIYA

Maybe you are looking for