Aplication manager gives error Code: U43M1U49

Hello,
i had running CS6 fine and up to date.
Then i downloaded Photoshop elements 11 trial and installed to chek it out.
After uninstalling that the problems began. So i uninstalled CS6, did run the Adobe creative suite cleaner and reinstalled CS6.
But still getting the error code. It finds and shows the updates but once started it says Errop Code: U43M1U49
I also have Lightroom 4 up to date and Lightroom 5 beta , thos run without problems.
have a nice day, Raymond

Hi Raymond,
Please Uninstall All Applications from Add or Remove Program(Win) or Utilities (Mac).
Once done please delete all Adobe Folders from these locations
Win
C:\Program Files
C:\Program Files (x86)
C:\Program Files (x86)\Common Files
C:\Program Files \Common Files
C:\Users\(Your Username)\AppData\Local
C:\Users\(Your Username)\AppData\LocalLow
C:\Users\(Your Username)\AppData\Roaming
Mac
~Library/Application Support
/Library/Application Support
Once done then please reinstall all applications and try updating them
regards,
Abhijit

Similar Messages

Adobe application manager getting error code : A12E6 please what can i do ?

adobe application manager getting error code : A12E6 please what can i do ?

Anass63113494 what Adobe software or service are you attempting to install? Also which operating system are you using?

Error Code: U43M1U49

I have tried to update PSE 12 and I get the following error codes.
Adobe Photoshop Elements 12.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 8.4
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
I tried it again and got the same error message. What should I do?
Thanks in advance for your help.

See that other discussion:
Update from 12 to 12.1 does not work. I receive an error code U44M1P2003. Is somebody know this error ?

ITunes gives error code -54 when sync with my iphone 5

iTunes gives error code (-54) when i try to sync with my iphone5

I am having the same issue. Since updating to iTunes 11 my iPhone 5 will no longer wirelessly sync. I am operating the latest version of Mountain Lion on a two month old Macbook Pro. When I plug in the USB I go through the steps of making sure the box is clicked to Wireslly sync, but after a few minutes of un-plugging the cord my phone dissapears from my devices. It tries to locate it, but cannot.
Furthermore, when I launched iTunes 11 for the first time my phone was synced, but since I accidenttly hit the eject button in the top right, this button has yet to come back. Even when the iPhone is linked via USB. Am I Crazy, stupid, or is this a bug?
BTW, how did MrTrav15 have this problem on 10/17 a month-and-a-half before the launching of iTunes 11?

When installing Adobe Creativ Cloud, gives error code: 205! Why? Have downloaded numerous times. Dmg!

When installing Adobe Creativ Cloud, gives error code: 205! Why? Have downloaded numerous times. Dmg!

Colegio Oswald please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve Error 205.

CS6 update fail: Error Code: U43M1U49

CS6 Master Collection (on Win 8.1) updates keep failing to download/install after 2 days repeated attempts. The error code is always: Error Code: U43M1U49.
Does anyone know why this could be happening or have a fix?
Thanks,
Gary Bird

Hello gazbaz1,
It would help us if you could share the following file located here:
\Program Files(x86)\Common Files\Adobe\Installers\
Sarika

Extension Manager CC error code U44M1P34 will not install product

Received update notice and ran the updater for the Extension Manager CC it turned with an error of U44M1P34 and contact support. Which the automated system fails to offer help for the Extension Manager. Signing out of Creative Cloud and relauching fails to clear the problem. All efforts to install the Extension Manager CC end with same error code. No way of finding a solution or contacting support!

I never withdrew any claim or closed any case, yet Adobe Support Staff did in fact close case. Adobe Support would lose connection and failed to reconnect or follow-up, even through contact information was provided. Support Staff closed or withdrew case to cover up their lacking a working solution and the failure in knowledge about Error Codes and their solutions. It seems a general lack of communication within Adobe to insure Support Staff have the correct answers for all Error Codes. Clearly the Code writers a reason for the Error Codes for any given product and a solution for clearing any Error Code, why Adobe Support Staff doesn't have access to this information, so they can address Customer's Problems is anyone's guess! But, clearing a Case before it is solved. Well, that is just sweeping the problem under the rug, in hope it goes away! Adobe Support is a BIG JOKE! Why support a Company that will not Support it's Customer Base?
7/7/14
Case #0185682058: Updating issue
Closed
7/7/14
Case #0185681800: Error code U44M1P34 Adobe Extension Man
Open - Pending Adobe Response
7/7/14
Case #0185681501: Still no help for Adobe Extension Manage
Open - Pending Adobe Response
7/5/14
Case #0185675782: Adobe Extension Manager CC Error code u4
Withdrawn
7/4/14
Case #0185675711: support for clearing Error u44m1p34 for
The issue of Adobe Extension Manager Version 7.0.0.347Withdrawn
The Problem of Adobe Extension Manager CC Version 7.0.0.347 not updating and returning error Code u44m1p34 still exists and hasn't been solved! Adobe Support would perform a few system checks then lose connection and never follow-up or reconnect. Six attempts using Chat and One Calling Adobe Support, still failed to correct the problem. At Adobe Support direction I have rewritten Msconfig and deleted AAMUpdater folder 1.0. Th e end results is update notice disappeared, but Adobe Extension Manager CC Version 7.0.0.347 never updated and still returns error code u44m1p34. What good is contacting Adobe Support if they do not have staff to handle issue or the correct information to solve problems within the program code? I have wasted 2.5 weeks on this issue and have nothing to show for all the work, just ERROR CODE U44M1P34. What a mess this bad code has caused! How long must people wait for a solution or a patch to be released, that addresses this Error Code? At this stage Contacting Adobe Support is a bad joke, it just doesn't exist! Adobe Extension Manager CC isn't even list in Product Support Menus! My information was not only given to each Adobe Support Staff, it is also listed every time, I log onto Adobe.com. I am tired of the guessing by the Adobe Support in Addressing this problem. I do not want a guess, I want a real and solid solution or a patch file. I played Adobe Support game and I am unwilling to do more damage to my computer by deleting files or rewriting the Operating System on some wild goose chase! I have been a Customer since 1980 and I expected a lot more than this from Adobe Support!

Has anyone experienced error code U43M1U49?

On attempting to update my CC apps I get the error code U43M1U49. (That's on my main PC. On my laptop I can't even update the CC desktop app.) Can anyone help?

Errors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

Trying to install software update, phone stopped responding and gives error code 9

While trying to update software on my iPhone 4, it stopped during installation and gave error code 9, now it says the phone must be restored but will not complete the installation and still gives error code 9, very frustrating. I tried on 3 different computers, same results.

reset preferences -
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
photoshop: https://forums.adobe.com/thread/375776
if that fails to solve the problem, restart in safe mode and test. if ae works, you have a conflicting non-essential program. you can use your activity monitor to find it.
if restarting in safe mode fails, uninstall, clean (Do a clean install) and reinstall ae.

Model m8530f, no recent changes, blue screen of death. Diagnostic tools gives error code BIOME-1 .

Model m8530f, no changes in weeks, blue screen of death while away. Diagnostic tools gives error code BIOME-1 .

Asamd1st, it appears that this is a memory error. I suggest removing the memory and reinstalling them one at a time. Then, boot to see if the computer runs properly. Do this with each stick.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Upgrading Adobe Application Manager gives error A12E1 - now what?

Just wanted to install Flash. But Application Manager first needed upgrading and it stalls on an error like "seems to be a problem with installation (error code A12E1)". What do I have to do now? I got a similar error code 5 weeks ago, and to remove the Application Manage I had to remove ALL Adobe apps first! I really hope there is another way of fixing this.

Download the latest version of AAM here and install it:
Adobe - Adobe Application Manager : For Windows
Adobe - Adobe Application Manager : For Macintosh
Mylenium

TS2039 After saving an Excel document on my Mac ( I do have Office Mac), it will not reopen and gives error code -43. It will also say that there is no such file, although the file is in the document box. Has happened twice now with big files.

I work on Excel files through my Office Mac program. On two occasions, a large Excel file, (about 1.5 MB) will not save and is not recoverable. It gives me an error code -43.
I work on many such files without problem, but this has now happened on two occasions with important files.

If it only happens with very large spread sheets, and only happens randomly, then one possibility is a buffer overflow, i.e., some piece of data is so large as to clobber the data that follows it. If that is the case then the problem would only manifest itself if (a) you happen to access that data, (b) write beyond its allocation, and (c) what's just beyond that gets clobbered is something involved with the file's pathname. Then when the pathname is needed it can't be found resulting in the -43.
In other words, more "quality" programming from Microsoft...not.
Just a theory.

No start, blue screen. Diagnostic tools gives error code BIOME-1. Any suggestions?

Hi,
My system does not start anymore. I use BIOS version 5.43 for my Pavilion 9190. Running Diagnostic tools gives an error code BIOME-1 in the memory test. What to do?
Fred

Since that indicates a memory problem, it would seem that would be where to start. First try to re-seat the memory modules (with the computer turned off). If that does not help, make the Ultimate Boot CD (with another computer) and then boot to it. Run the memory testing routines. MemTest will tell you which module is failing, if you read the results properly as it runs the testing routine.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Acquire semaphore gives error Code = 0

I have incorporated a semaphore into our software. The semaphore protection works fine for a little while then gives a mysterious error code = 0. From that point on, no semaphore operations will work correctly. Has anyone ever seen this error? Any clue what it might mean. There is no message included with the error.
During Debugging I incorporated a mechanism to destroy that semaphore and get a new one. I found that I can create a new semaphore but when the new semaphore is used, the reference is invalid. I am using unique named semaphores. I'm thinking that once the error occurs, the semaphore core is somehow corrupted.
This is occurring in built code running on windows server 2003.
Jim West
Summitek Instruments

I'm not following the reasoning that there is a race condition. It seems to me that if the semaphore works as advertised... meaning that the "Test and Set" action is correct. There can never be a race condition of the kind that multiple processes lock the same semaphore.
In my webserver, there are two pieces to the puzzle. The server that creates/destroys the semaphore and the processes that acquire/release the semaphore.
The main server, which is always running, creates a named semaphore. Places that reference in a global. Let's called it REF. On shutdown, the semaphore is destroyed.
When running, a user requests a web page which then spawns off another handler process using a VI template (VIT). Within this vi instance, the REF is used to Acquire the semaphore, do the protected action, and release the semaphore. This will happen hundreds of times with no error. Then, at some point an acquire is called and the acquire semaphore times out. You can be sure that I have instrumented the code in such a way to tell me if a release failed or some other error.
One possibility is that the VIT instance spontaneously exits after the semaphore is acquired. I don't believe that this is happening but there would not be any way to 'log' that behaviour.
It is possible that multiple VITs will attempt to acquire the semaphore using REF. But that is why I am using the semaphore, to stack up the acquires in a methodology similar to stacking on non-reentrant vis.
Jim West

Application Manager Update Error Code A12E4!?

Ok first off, im on a new mac and yes i have looked everywhere online for the solution and all adobe can say is to try reinstalling, yes i have the latest updates, yes i have downloaded and reinstalled the latest application manger, yes i have used the cleaner tool, and yes i have reinstalled everything. When the application manager is opened; it automaticly goes to update, shows a progress bar then stops and says "we've encountered the following issues: Sorry, the program is not responding correctly (error code: A12E4)"... I cant even open application manger without it automaticly doing this and reaching this error message.
I have wasted hours of my life trying to resolve this, i dont feel like i should have to be jumping through all these hoops with a program im paying for. This is clearly not a problem on my side, its adobes side, can you fix this problem please?... Im very dissappointed, adobe is suppost to have top quality professional products and services.
If anybody knows any real solution could you please help me out?

Hi Art.StevenJacobs,
Please follow the mentioned steps:
1. Navigate to Library/Application Support/Adobe/OOBE and rename it to OOBE.old
2. Enable root account: http://support.apple.com/kb/ht1528 and log on to root
3. Disable any security software if installed on Mac
4. Download CC desktop from www.creative.adobe.com and try to install it.
Regards,
Romit Sinha.

Aplication manager gives error Code: U43M1U49

Similar Messages

Maybe you are looking for