Aplle computers locating Time Capsule; but, no luck with PC
My PC cannot identify my Time Capsule router? Anyone experiencing the same problem? Any suggestions? No problems with connecting to my Mac computers.
Thanks,
Jay
I had the same problem,
1- install the new airport software from the apple web site, under downloads on the mac
2-in the airport utility under manual setup / go to disk / check enable file sharing / under workgroup type in MSHOME
3-update
4- on the pc in control panel / performance and maintenance / system / computer name / change workgroup to MSHOME
5- remove existing windows airport software
6- pc go to step 1 / apple web site download airport software for windows / install / password access should be same as the airport disk utility
the apple web site downloads are an updated version, this was what I did with a little help from everyone here on this discussion. My Daughter uses the pc for college and the backup with norton 360 works great.
Let me know how it works out
Thanks Mike
Similar Messages
-
I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?
What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time. -
I have a new mac book pro and and older MAC desktop. Both are backing up to my time capsule but it is close to full (1TB). If I purchase a new time capsule (2TB) can I bridge them or access both and back up to it still from both computers? If so how do I do this? Thanks in advance.
If you add another Time Capsule, you can have one or both Macs backup to that new device.
However, please note that it is not possible to have backups "carry over" seamlessly from one Time Capsule to another.
If you add a new Time Capsule, each Mac that is backing up to the new device will make a new complete backup and then backup incrementally after the master backup is completed. -
Older Macbook connects to Time Capsule, but not really
Problem: My wife's Macbook (Intel Core Duo) is able to connect to my new Time Capsule, but it quickly loses its connection. It doesn't really disconnect though - it still says that it is connected with full reception, but there is no internet, or time machine, and I can't even ping the router.
The router logs show that she is still connected though, because they don't say "Disassociated with station" until she turns airport off.
There are definitely a lot of wireless networks around here, but I don't think interference is the issue, since many other computers are working fine. Her computer can connect to some of the other routers just fine. She could also connect to my old router just fine.rvenable wrote:
Problem: My wife's Macbook (Intel Core Duo) is able to connect to my new Time Capsule, but it quickly loses its connection. It doesn't really disconnect though - it still says that it is connected with full reception, but there is no internet, or time machine, and I can't even ping the router.
Welcome to Apple's discussion groups.
When that happens, if you open the Network panel of System Preferences, select the AirPort connection item on the left, click the "Advanced" button, then the "TCP/IP" tab, do you see reasonable values for the several fields?
It might help to reset the connection settings on your Mac using these steps one at a time until it works again:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
3) In the same panel as (2), define a new location and see if you can make that work.
4) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
5) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
They may not help, but they'll only take a couple of minutes to try. Before you try these, note all your network settings, because the latter steps will destroy them. -
I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it. -
Wifi Working With New Time Capsule But Can't See It To Configure Settings?
I had an airport extreme but recenlty purchased an airport time capsule. When I initially plugged it in, by airport utlity saw it and it asked me to set up a password. But then I noticed there was no internet signal getting to the time capsule. We wound up replacing the DSL Router and now the internet is up and running. But now when I open the airport icon, the time capsule doesn't even show up. When I open the airport utility through finder it shows the time capsule but blocks me from accessing anything. So I can't go into any set up configuration for changing passwords, setting up guest network or setting up the back up to the time capsule. I don't see any downloads for a new utility for the time capsule, so I'm assuming it's the same as for the airport extreme? What do I need to do in order to be able access the configuration areas?
Reboot the TC.. it is hard for poor OSX to find it.
No luck.
Just press reset and start again.
Do a new clean setup.. please use all SMB names this time, short, no spaces and pure alphaumeric.
Ensure ipv6 is set to link-local on both the wireless and ethernet if you use it. Wireless is essential even if you use ethernet you cannot do setups without wireless.
Still got trouble??
What is the OS on the computer and therefore version of the airport utility.. you will have huge problems with Mavericks.. as that is its nature. -
I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network
I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.
You will need to start over on the setup of the Time Capsule as follows:
Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule. The Ethernet cable must remain connected at all times.
Click the WiFi icon at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule
The example below shows an AirPort Express. You will see Time Capsule on your screen.
That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
Network Name..........Type in the exact name that the Netgear wireless is using
Base Station.............Type in a name that you want to call the Time Capsule. Use something short and simple. Mine is TC, for example
Password..................Type in the exact password that the Netgear wireless requires
Verify.........................Verify the Password again
Click Next
The setup wizard will configure everything for you automatically. When you see the message of Setup Complete, click Done.
That's it. Now you have one big "extended" network. Technically, this is called a "roaming" network. -
I have an older white Macbook. It is supposed tohave "N" networking but needs to be unlocked. The software is supposed to come with the time-capsule, but I can not find it, also I checked with a friend who just bought an airport extreme and he can't find any software. Does anyone know where this software is located?
I think you are looking for this: AirPort Extreme 802.11n* Enabler for Mac - Apple Store (U.S.)
-
Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.
Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers. -
I was able to copy all my files from my Time Capsule, but that is all they are...files. How do I get my new Mac Mini to emulate my other Mac?
Doggiemommie,
Copying files is not a good idea.
The "other Mac" was backed up onto Time Capsule using the Time Machine. On your new Mac you should restore the old user - rather than copy files manually.
This usually happens during the initial setup of the new computer or you can do it later using Migration Assistant.
Please note, it is possible to damage backup file on the Time Capsule when you browse it and copy files manually.
Hope this explains.
TZ -
Can anyone recommend an external storage device to supplement my mac book air? I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.
Hi CJR
I'm not sure how Time Capsule can be replicated onto your external drive but there is a USB port on the back of TC that can be hooked up to any recent external drive.
Another thing to think about , besides a Time Capsule failure, is the theft of your Time Capsule, so it might be a good idea to consider separating any redundant back-up from your Time Capsule or both my be stolen.
TC will back up until full and then begin deleting the oldest back-ups. Mine is a 2TB Time capsule.
My back-up plan is as follows:
1. Macbook Air back-up on Time Capsule though Time Machine backs up everything - I think it's about every 30 min or so.
2. Contacts, reminders, appointments, notes, email are backed up through iCloud.
3. iTunes and non-itunes purchased music is on iMatch (and no need to back-up) and any non-iTunes music is backed up on an HP external drive (in case Time Capsule dies)
4. Photos are on my MacBook Air and are backed up on my HP external drive.
5. Office documents (Excel, Powerpoint, Access etc) are stored in a Skydrive app (like iCloud) and Skydrive syncs these docuemnts with the MS cloud and my old PC and does not alter their native format like storing in iCloud would do.
Cheers -
I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?
It must have found the old backup corrupt.. so you will more than likely have little choice. You can archive off the old backup if it is still useful.
You can also verify it. See A5 http://pondini.org/TM/Troubleshooting.html
He also has some info on this problem. eg C13. -
my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?
This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get. -
y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all
Giancarlo Messalli wrote:
1) are you sure a reset holding the reset button will not delete my data?
Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
Thank you again
I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
Here is the Apple info on reset.
http://support.apple.com/kb/ht3728
And here is the quote from the horse's mouth so to speak.
Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility. -
Replacing an Airport Express with a Time Capsule but it won't connect to the internet.
Hello, I hope somebody can help.
I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
What could the problem be?99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
Ring your ISP and make doubly sure you have exactly the correct username and password.
If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.
Maybe you are looking for
-
Having trouble with redirects in gmail is there any way to fix the problem?
When I try to open gmail it says it can't due to to many redirects. Is there anything I can do to stop this?
-
Query Builder in Business Object Edge 3.1
Greeting, When I was using Crystal Vision Server 11.5, I can use the Query Builder to get metadata for objects stored in the repository. Now we moved to BO XI Edge 3.1 with WACS. I click on the click for Query Build and the system said the link is br
-
Calling SoundTrack sample editor from inside Logic
Does anyone ever tried to tweak Logic to use SoundTrack as the default sample editor?
-
Deleting Time Machine Backup Folder on External HD
HI everyone, Well I liked the idea of Time Machine so much, that I went out and bought an external HD to hook up to my mac to back up my files. So my time machine backups are located now on my external. After a recent update gone wrong, I had to wipe
-
Could some one explain me in detail what is an IDOC and what is a Message type with a simple example? Appreciated.