APM how to create APM application group for same application but different application paths

Hi all,
We have few applications which are of same name but different application path.
Please check the screenshot. When we create different application groups using APM wizard, we still get errors mentioning the conflict. How to resolve this issue.
Thanks
Manish
Manish

I cannot see any screenshot here, what do you mean same application name but different path?

Similar Messages

  • How can I share user in the same workspace but different applications

    I recently created a new application (new) in the same workspace as my old application (old).
    I have about 35 application express users. They are stored in uppercase.
    The new appl (old) , login page will only accept the DB user login and Not the application users. When I type it in uppercase, it revert it to lower case.
    I have no authentication schemes, uses all defaults. I created a DB user and 35 application users.
    It give me " Invalid Login Credentials'.
    I am due to upgrade tomorrow, but now have run into this problem!!
    Desperate

    Angela,
    That is not clear.
    I recently created a new application (new) in the same workspace as my old application (old).Now you have exactly two applications in that workspace.
    I have about 35 application express users. They are stored in uppercase.Okay.
    The new appl (old) , ...What?
    ...login page will only accept the DB user login and Not the application users.What DB user did you create and why did you create it? Your application must be using a different authentication scheme that the one you intended. Check the current authentication scheme and set it to the Application Express scheme (make it current) or whichever scheme matches that used by the working application.
    When I type it in uppercase, it revert it to lower case.I can't explain that unless you created a database user account using double quotes around the lower-case name.
    I have no authentication schemes, uses all defaults. I created a DB user and 35 application users.Again, why did you create a DB user?
    I am due to upgrade tomorrow, ...What is an upgrade?
    What is your current database version and Application Express version?
    Scott

  • How can i share photos on the same mac but different users?

    how can i share photos on the same mac but different users? we have different iphoto acounts and just want to be able to look under users in the finder and view another users iphoto.

    You may try moving ur librarie to the folder /Users/shared if and link it to iphoto from there
    You may locate and link libraries from arkiv-->change library in iphoto

  • How to create distribution rules group for wbs settlement rules

    Hi,
    How can I create distribution rules group for WBS element settlement rules ?
    For some WBS elements I can see(in view mode(cj03)) distribution groups in settlement rules screen but when I try to edit settlement rules I only see default group.
    How can i create/edit those groups ?
    Regards,
    Rafał

    Self answered:
    CJIC t-code

  • How to create a authority group for our customer table(se54)?

    Hi,everyone:
          I found a problem when I create a authority group for my customer table,I can't write the creation
    to a request no(can't assign to a package),I want to know whether the authority group I created can be
    transport to the PRD when I realse the request no.
    Thanks!!!

    Auth Group is nothing but a table entry so for sure it can be transported to any environment, before Assigning any Auth group create one in SE54 when you try saving it it would ask you the TR number which you can transport to PROD.

  • How to generate single move order for same components amongs different job using component pick release

    Hi all,
           I am new in manufacturing and we want to implement functionality of generating single move order for same component among different job using component pick release. Can any one help in this.
    we are using oracle R 12.1.3 version.
          For example. We create finish good XYZ which is build in WIP item. We create discrete jobs for XYZ suppose JOB1,JOB2,JOB3 multiple job we can create for XYZ item. in these JOB suppose component abc is similar with 5 quantity. so our goal is to generate 1 move order for all three JOBS with 15 quantity of abc component.
    please help me to achieve this goal. Immediate  Reply will be appreciated.
    Thanks & Regards
    user11152750

    PranitSaha
            Thanks For your reply. Can you please tell me in detail how can I group as I am new. How using MRP we can group same component from different job in single move order for delivering that component to shop floor.
    Thank you..

  • How to Create DI Discount Group for Customer Group?

    Hi All,
    i'm trying to create DiscountGroups for Type Customer Group in developtmnt side in sap b1. i already succed to create  Discount Group for Type Specific BP as you can see in the code i wroe below:
    di.BusinessPartners MyBP= GetBusinessObject (BoObjectTypes.oBusinessPartners) as di.BusinessPartners;
    MyBp.DiscountGroup.DiscountPercentage=20;
    but i don't succed to find the di object that give me the option to create DiscountGroup for Customer Group ( not for specific BP).
    i will very appriciate to get any help with it...
    Regards,
    Peer Shoval

    hello, maybe you could try with DI Server, if your installation allows
    that.
    try experimenting with
    -> EnhancedDiscountGroupsService Object
    SAPbobsCOM.EnhancedDiscountGroupsService dg_service = null;
                    SAPbobsCOM.EnhancedDiscountGroup dg = null;
                    SAPbobsCOM.EnhancedDiscountGroupCollectionParams collDGParams = null;
                    dg_service = (SAPbobsCOM.EnhancedDiscountGroupsService)((SAPbobsCOM.Company)Application.SBO_Application.Company.GetDICompany())
                                    .GetCompanyService().GetBusinessService(SAPbobsCOM.ServiceTypes.EnhancedDiscountGroupsService);
                    collDGParams = dg_service.GetList();
                    dg = (SAPbobsCOM.EnhancedDiscountGroup)dg_service.GetDataInterface(SAPbobsCOM.EnhancedDiscountGroupsServiceDataInterfaces.edgsEnhancedDiscountGroup);
                    dg.Type  = SAPbobsCOM.DiscountGroupTypeEnum.dgt_AllBPs;
                    dg.ValidFrom = DateTime.Now;
                    dg.ValidTo = DateTime.MaxValue;
                    dg.ObjectCode = "dontknow";
                    dg.DiscountRelations = SAPbobsCOM.DiscountGroupRelationsEnum.dgrAverageDiscount;
                    //dg.DiscountGroupLineCollection.Add() //etc
                    SAPbobsCOM.EnhancedDiscountGroupParams dg_param = dg_service.Add(dg);
                    log.DebugFormat("Added discount group  {0} - {1} - {2}", dg_param.AbsEntry, dg_param.ObjectCode , dg_param.Type);

  • How to create cutom authorisation group for custom table?

    Hi,
    I created once custom table.
    i want to allow only some users to create entries.
    how can i achieve this?
    if with creation of z authorisation group tell me procedure
    thanks in advance.

    Hi,
       See to this link it may help you.
       How to create Authorization group
       Custom Authorization Objects

  • How to create second transport request for same programe

    Hello ,
    I created workbench transport request. The changes are done and still in development system.
    Now I have to do another change on the same program that has to be in different transport request,
    but whenever I  change something, and activate it, the changes are saved in first transport. How I can
    create another transport request for the same program without releasing the first one.
    Thanks

    Ask your basis team to provide you with a "Transport of Copies" request.
    Once you get it, add your object in this request and transport. your object will be transported and the original request will not be released. Do note that the changes will still be saved in the original request but you can still transport your object without releasing the original request.
    Edited by: Priyank Jain on Aug 12, 2010 4:12 AM

  • How to create a multipage PDF with same template but dynamically varying data?

    Hello,
    I need to create a multi-page PDF where I need to use the same template but dynamically varying data.
    Eg Scenario:
    1. I have data for 5 material in my ABAP program.
    2. I have a PDF template in SFP which has a 2 page structure.
    3. Based on the number of materials (5 in this case), I need to generate a PDF which will have 10 pages (2 for each material).
    4. the generated PDF should be like the one shown below:
    e.g.  MATERIAL_PDF (pdf name)  
          |  Page1(Mat1[View1].data)
          |  Page2(Mat1[View2].data)
          |  Page3(Mat2[View1].data)
          |  Page4(Mat2[View2].data)
          |  Page5(Mat3[View1].data)
          |  Page6(Mat3[View2].data)
             .. and so on...
    Thanks,
    Aniket

    Isn't it just by setting the two pages into a form ( like an subform in the content ) and put the settings in a proper way?
    There is this setting, that the masterpage comes up everytime the pagecount is done.
    Example
    Page 1 3 5 --> Masterpage 1
    Page 2 4 6 --> Masterpage 2
    And the designview with the flowing data, you can do it by scripting to get to the next page after the pos is finished.
    Unfortunaly I do not got a system atm, so I hope the explaination give you a clue, where to search.
    Regards
    Florian

  • ITunes duplicating artwork for same artist but different song.

    iTunes is automatically adding artwork to another song of the same artist in my library. I import artwork for one track of an artist and iTunes applies that artwork to all tracks by the same artist. This is silly. They are all singles and I want each track to have the proper artwork.
    I have tried deleting the duplicated artwork and adding its own but that doesnt help. I tried restarting iTunes as well.

    Thanks for your help but its doesnt really apply to me.
    Let me try to be more clear. I have 100 SINGLES that I have in an album that I named "1980 Top 100". I do this because I have 1981, 82, 83, 84..and so on.
    Within this album I have a few artist with 2 or 3 singles. iTunes is automatically adding the artwork for "Air Supply - All Out Of Love" to "Air Supply - Lost In Love". I should be able to add a different artwork for each single an artist has within this album. However, I cannot seem to force iTunes to use the artwork I want for a track of the same artist.
    THE REASON I BELIEVE THIS CAN BE FIXED:
    From those 2 tracks by Air Supply, they each are showing different artwork in their info. Coverflow seems to be grouping the artists.
    EDIT: In another album Im getting this:
    CoverFlow is not grouping the artist but it is using the same artwork for both even though they each have their own separate artwork in the info...
    Message was edited by: DJ Kaliber

  • How to create 2 transaction codes for same report program with diff title

    Hi All -
      I have created report program and create 2 transaction codes with different short description. I want to display the Tcodes decriptions instead of program attributes title.
    Can anyone pls tell me how to do this?
    Thanks,
    Kannan

    Hi Kannan,
    define 2 titlebars t1 and t2 for the report. In report initialization,
    IF sy-tcode = 't1'
      SET TITLE t1.
    ELSE.
      SET TITLE t2.
    ENDIF.
    Regards,
    Clemens

  • How to plot 2 signal in the same graph but different frequency?

    Hi!!
    I have 2 sensor, motion and EMG.. I want to plot both of the signal (after processing) in the graph (real-time)..
    The frequency of motion sensor is 128 Hz and for EMG sensor 800 Hz..
    When I'm trying to plot (motion and emg) in the same graph, the signal from EMG (red line) not smoothly and very different with motion sensor..
    I'm trying to resample that signla but, it's not working..
    Can you help me?
    thank youu
    Attachments:
    graph.png ‏11 KB

    Akardo14 
    Yes, I trying to use merge signal before...  but signal from emg signal didn't appear in the graph (using merge signal figure)..
    I'm showing motion and emg signal in different graph, it's work..
    But I need to show both of signal in one graph to compare between motion and emg signals (fig1)
    Attachments:
    using merge signal.png ‏19 KB
    fig1.png ‏9 KB

  • WIN32_DiskDrive Shows same SerialNumber for same Mfgr but different models

    We're trying to gather the serial numbers for all USB drives plugged into our users' workstations, but have run into a snag. The same serial number is being reported for different model drives and on different workstations. I've searched and searched trying
    to find an answer, but as the serial number is supposedly generated by the mfgr, is this something that is distinctly done by say Samsung?  Any suggestion would be greatly appreciated. TIA..
    Windows 7, Tried both 64 and 32 bit Powershell, UAC set/not set
    GWMI -ComputerName 8LC4FQ1 -Class WIN32_DiskDrive -EnableAllPrivileges | select PSComputerName,Name,Model,SerialNumber
    GWMI -ComputerName 3410SYK -Class WIN32_DiskDrive -EnableAllPrivileges | select PSComputerName,Name,Model,SerialNumber
    (e.g.)
    PSComputerName  Name                        Model                                        
    SerialNumber                            
    8LC4FQ1                \\.\PHYSICALDRIVE0  WDC WD2500AAJS-75M0A0        W -DMWVAH29E9280                  
    8LC4FQ1                \\.\PHYSICALDRIVE1  SAMSUNG HM160HI USB Device  152D20329000                          
    3410SYK                 \\.\PHYSICALDRIVE0  WDC WD5000AAKX-60U6AA0     W -DCW2CPE1W5037                  
    3410SYK                 \\.\PHYSICALDRIVE1  SAMSUNG HM320JX USB Device  152D20329000

    Hi Jason,
    The SerialNumber isn't guaranteed to be unique. But as different manufacturers use different schemes for generation of SerialNumbers, they are mostly unique.
    According to the document of Win32_DiskDrive class, this Number is allocated by the manufacturer to identify the physical media.
    So I recommend you can contact the Manufacturer to get more detailed information about SerialNumber.
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to create a field group.

    Hi all,
    Can anyone please explain how to create a field group for few fields?
    My requirement is i want to Create a specific fieldgroup for maintenance of the fields for the contacts TAB on the customer master
    KNVK-NAME1
    KNVK-NAMEV
    KNVK-ABTNR
    KNVK-PAFKT
    KNVK-BRYTH
    How todo this? please anyone can explain the steps.
    Mohana

    If you are creating these fields with Business Data Tool Set.
    Then you will have field group and fields.
    Field are attached to field groups,
    Field groups are attached to view
    Views are attached to Section
    Sections are attached screen : you are calling as a tab
    Regards,
    Shiva Kumar
    removed by moderator
    Edited by: Jan Stallkamp on Dec 19, 2008 2:33 PM

Maybe you are looking for

  • HR-Promotion report  (HR-PA)

    Hi, I have a report in HR-PA. here in this report we are looking for promotions for employee . Here in date range we will get list of employees and thier promotions , but here we need only latest prmotion details of employee not all promotions in tha

  • Default values for long text for mic in inspection plan

    hi, Some long text are coming default when i am creating inpection plan for mic. This is coming for only particular plant. For other plant it is not coming. Is there anywhere we can make it as default for a particualar line item . ie for particular c

  • Error message updating Itunes to 11.0.5

    I keep getting the message Error writing to file: C:\program files (x86)\Itunes\itunes.resources\de.lproj\deviceprefsoptionsIPod.itxib. Verify that you have access to that directory. I have tried completely uninstalling and reinstalling itunes and I

  • Want to recycle old Mac desktop but can't find install discs. What to do

    How do I do this without the disc?

  • ERROE 4450 when burning disc-put of nowhere

    I've never had a problem and never changed a setting but all of a sudden when i make a cd from a playlist it stops after 3 songs or so. Any ideas how to fix this? I have Windows XP. THANKS ALL