APO/BW: Verifying/Establishing a connection between BW and APO

Hi
1. Is there a way to see that my BW system is connected to an APO system, other than finding a name with APO in it under the Source System tree in BW?
2. Also, if the connection does NOT exist between BW and APO, can you provide me with the steps on how do I establish such a connection?
3. Does a successful in Generate Export DataSource in BW indicate that my BW system is connected to APO DP?
Thanks

. Is there a way to see that my BW system is connected to an APO system, other than finding a name with APO in it under the Source System tree in BW?
In source system tree, you will find all the systems that are connected to your BW system. The system name need not have to start with APO.
2. Also, if the connection does NOT exist between BW and APO, can you provide me with the steps on how do I establish such a connection?
Transaction Sm59. you need to know the source and destination IP adresses. Usually, the baais will take care of connections.
3. Does a successful in Generate Export DataSource in BW indicate that my BW system is connected to APO DP?
NO. Export generaion is within BW system; nothing to do with the APO system that is connected.
Ravi Thothadri

Similar Messages

How to establish the connection between crm and r/3

Hi,
Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
Could any one tell me where to find adapters and plugins for this.
Thanks in advance.
Ajey

Hello Ajey,
in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
B01: CRM Generation
C71: CRM Connectivity
B09: CRM Replication
from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
Regards
Gregor

"Unable to establish a connection between WebEx and the mail server."

Hi,
I installed Cisco WebEx and integrated with our Microsoft exchange server. It showed server "UP". everything's came up and working fine after that and sudenlly i found this message "Unable to establish a connection with the mail server. Please recheck settings."
I went into the Mail Server setup to edit settings and now, it shows Server Down. Do I need to do something on the MS Exchange 2010 or from webex server ??
Any help is greatly appreciated. Thanks a lot!

Every 180 seconds, CWMS verifies the connection to the SMTP server by establishing a connection on TCP port 25 (SMTP) and then sending the EHLO command followed by the QUIT command. This check is also performed once when logging into the admin web page or when browsing to System -> Servers (where the status of the mail server is displayed).
If this sequence does not complete successfully, the warning “Unable to establish a connection with the mail server. Please recheck settings.” will show in a banner at the top of the CWMS admin pages.
You can verify the connection to the SMTP server manually by using “telnet 25”.
If you have access to the CWMS unix shell be aware that CWMS does not come with the telnet command installed.
As an alternative, you can use this 3-lines script:
exec 3<>/dev/tcp/x.x.x.x/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Replace x.x.x.x by the ip address or hostname of the SMTP server and save the script in a file, f.e.:
/* script saved in a file named ehlo */
[root@dchriste-cwms-adm1 ~]# cat ./ehlo
exec 3<>/dev/tcp/10.48.54.79/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Then, execute it:
[root@dchriste-cwms-adm1 ~]# sh ./ehlo
The output should be similar to this:
220 *******************************************************************************************************************
250-confukdc.confuk.com Hello [10.48.52.110]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-XXXXXXXXXXXXXXXXXXXXXXXA
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK221 2.0.0 confukdc.confuk.com Service closing transmission channel
Also, you can use this tcpdump command to see the conversation (replace x.x.x.x by the SMTP server’s IP address or hostname):
tcpdump -vXs 0 host x.x.x.x and tcp port 25
If you have HA, it is not certain which admin VM talks to the smtp server, so best to check both.
If you don't have access to the CWMS unix shell, best to span the switch ports and run packet capture.

Cannot establish Bluetooth connection between iphone4 and ipad2

I have an iphone4 which cannot connect via Bluetoooth with ipad2, even though I tried all that is said in Apple support , but still no success. Really cannot understand as my iphone4 connects to a Bluetooth ear piece which is of different make and these 2 piece's are from Apple but cannot establish a connection via Bluetooth. It's surprising. So please help and advice.
thanks Guys

The iPhone is not designed to Bluetooth pair with a computer or an iPad except for personal hotspot (sharing the phone's cellular internet connection). It can use Bluetooth for Handoff/Continuity and for Keynote Remote but the devices are not paired. More information: Bluetooth: Why can't I pair my iPhone or iPad with my computer?

Can't establish cable connection between mini and TC

I recently had to restore the system on my mini.
it is now in a 'just purchased' state.
previously i backed up everything wirelessly (even the initial backup),
so now i have the most recent working backup on my TC.
NOW i want to restore the system from TC to its recent working state.
but it seems i can do it only wirelessly, as hooking up mini and TC via Ethernet cable won't help mini see the TC.
I turn off AirPort on my mini,
connect TC's LAN port to mini.
Turn on TC.
In my Network Settings
Ethernet properties are:
Location - Automatic
Status - Connected (active and has the IP address 192.168.1.12)
Configure - DHCP with manual address
IP Address - 192.168.1.12
(DHCP can be left automatic with the only difference that
Status says CONNECTED, BUT since the 'IP is assigned automatically, Ethernet MAY NOT be connected' - have no idea what this MAY NOT means, although when i unplug the cable, Ethernet connection disappear from the list)
Now the Time Machine doesn't see any devices as the source of backup.
What am i doing wrong?
i can still run the time capsule wirelessly, but as far as i remember the initial (wireless) backup of approx 80 gigs took more than 24 hours... i'm not that patient anymore.
Please help.
Thank you.

I recently had to restore the system on my mini.
it is now in a 'just purchased' state.
previously i backed up everything wirelessly (even the initial backup),
so now i have the most recent working backup on my TC.
NOW i want to restore the system from TC to its recent working state.
but it seems i can do it only wirelessly, as hooking up mini and TC via Ethernet cable won't help mini see the TC.
I turn off AirPort on my mini,
connect TC's LAN port to mini.
Turn on TC.
In my Network Settings
Ethernet properties are:
Location - Automatic
Status - Connected (active and has the IP address 192.168.1.12)
Configure - DHCP with manual address
IP Address - 192.168.1.12
(DHCP can be left automatic with the only difference that
Status says CONNECTED, BUT since the 'IP is assigned automatically, Ethernet MAY NOT be connected' - have no idea what this MAY NOT means, although when i unplug the cable, Ethernet connection disappear from the list)
Now the Time Machine doesn't see any devices as the source of backup.
What am i doing wrong?
i can still run the time capsule wirelessly, but as far as i remember the initial (wireless) backup of approx 80 gigs took more than 24 hours... i'm not that patient anymore.
Please help.
Thank you.

JCo connection between java and ABAP

Hi,
Any pointers for some good material on establishing JCo connection between ABAP and Java to execute ABAP FMs.
Thanks and Regards
Arpita Saxena

Please find following link for your reference.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/85a483cb-0d01-0010-2990-c5168f01ce8a?quicklink=index&overridelayout=true]

Connection between Portal and MDM

Hi all
Can anybody help me on how to establish the connection between portal and MDM with step by step procedure.
i am new to this combination .
before i worked with portal but not worked with MDM .
Regards
Suresh babu

Hello Suresh,
As of my knowledge MDM IViews have the advantage to ful fil your neeed to provide connectivity moreover,that they are not complex in structure and are therefore not restricted by any underlying schema structure. As opposed to regular iViews in other systems which are embedded into the pages on which they appear, MDM iViews are more generic and granular in nature enabling their placement on a page to be more adaptable.
The SAP Enterprise Portal (SAP EP) offers templates for creating the iViews. The following are some examples of these templates available at the link:
[http://help.sap.com/saphelp_mdm550/helpdata/en/45/c9f8cac2124ebee10000000a11466f/content.htm]
Procedure:
       1.      Create a new page using the page wizard.
       2.      To see the iViews you created on the new page, you need to link them to the page. Right-click each of the iViews that you created and from the context menu, select Add iView to Page → Delta Link
       3.      Double-click the new page you created and select:
Page Content to view a list of the iViews that have been linked to this page
Page Layout to view the layout currently assigned to this page. The iViews can be rearranged using the drag&drop function.
       4.      The visual structure of a page can be changed with the Page Layout function. Select Define Layout to reset the layout of the page.
       5.      Select Preview to view the page showing how the iViews have been arranged. The preview simulates what an end user sees at runtime.
Detailed pictorial presentation available at:
[http://help.sap.com/saphelp_mdm550/helpdata/en/45/c8e2fa5f0c2e97e10000000a155369/content.htm]
Hope you will find it helpful.
Regards,
Krutarth

Connection between BI and XI

Hi All,
We are trying to establish a connection between BI and XI. This will be an inbound process from XI to BI ( A push to BI from XI). Can some body explain the technical steps we need to take to configure an XI source system in BI so that we can then create data source on that sources system.

Hi All,
Now I am writing the ABAP code for the method in Proxy class. I could not find a exception class that is needed to complete the abap code.
Here is the code
method ZII_DATA_TO_BW~EXECUTE_ASYNCHRONOUS.
DATA: l_text TYPE string,
l_s_data TYPE line of /BIC/WCQSENDXML00001000,
l_t_data TYPE /BIC/WCQSENDXML00001000.
FIELD-SYMBOLS <l_line> LIKE LINE OF input-data-item.
LOOP AT input-data-item ASSIGNING <l_line>.
MOVE-CORRESPONDING <l_line> TO l_s_data.
APPEND l_s_data TO l_t_data.
ENDLOOP.
CALL FUNCTION '/BIC/CQSENDXML00001000'
EXPORTING
data = l_t_data
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 INTO l_text.
RAISE EXCEPTION TYPE ZCX___BIC__CQSENDXML00001000_E
EXPORTING text = l_text.
ENDIF.
endmethod.
In this code the ZCX.... class is not found in my class implementation. What could be the possible cause of this issue? In the how to paper it asks to click on the signature to check for the Exception but switching the Exception on only shows the type attribute and no exception class is visible.
Please help.

Establishing connection between BW and R/3 for BW extractions

hello all,
have learned SAP BW recently. have got BW 3.0 & R/3 installed on two different laptops. want to know how to establish a connection between them both for BW extractions.
thanks

Are the laptops connected by way of any network ?
Use the source system creation wizard for creating the source system.
Also what versions are you on ? R/3 and BW
Otherwise you can create the individual RFC connections through SM59.
Arun

Need to establish Connection between CRM and   Virtual Directories.

Dear All,
I am working for Telecom project.
I have one requirement that we need to establish Connection between CRM and   Virtual Directories.
This is existing in Access management system.( SAP EP environment )
The basic requirement is, with SAP EP environment we are integrating 8 different application. But for all this Application we have a one more system called Access management system (like Basis in Sap). This will validate the user access and BP(Business Partner ) data for users who logon to a different respective application. For all this applications Company data (Master Data) has to provide from CRM and the changes took place for Company data in CRM will be updated in to Virtual Directories .For this service we need to establish Delta mode connection between SAP CRM and Virtual Directories.
Which is existing in Access management system .
   Do we have any standard connectors from SAP CRM to connect and who we can achieve this .
Please let us know..Certainly there will be a reward points
Thanks & regards.
BNP

Try posting this question on the BPA Suite forum - http://forums.oracle.com/forums/category.jspa?categoryID=194

Need help in establishing the connection between BO federator and Oracle DB

Hi Experts,
I am working on BO federator and now I need to establish the connection between BO federator and the oracle db to use this as the source for the federator,
I know we need to download the respective oracle DB connect .jar file from the oracle web site and place it under the drivers section(folder) of the BO Federator.
Now I need to understand what is/are the next steps I need to follow and what are the values for the following parameters which are required during establishing the connectivity while creation of data sources from federator end.
Host Name:
Port:
SID:
Schema:
Please share the details, any help will be highly appreciated.
Thanks with regards,
Vinay

Hi,
Please find below details.
Host Name: Server Name or IP Address (Oracle)
Port: (oracle Server Port)
SID:SID is a unique name for an Oracle database instance. -> To switch between Oracle databases, users must specify the desired SID <-. The SID is included in the CONNECT DATA parts of the connect descriptors in a TNSNAMES.ORA file
Schema: no need to enter(Blank)
Thanks,
Amit

Can not Establish Connection between outlook and exchange 2013

hi guys
i recently install my exchange 2013 sp1. I configured DAG and its working great.
but the main problem is outlook. I deploy all of the dns records in my public dns but now i cannot establish any connection between exchange 2013 and outlook 2013.
I mean when i want to create a new email account for my users i face with this error :
" the name cannot be resoved. the connection to microsoft exchange is unavailable . outlook must be online to connected to complete this action "
and finally when i study an article it refers to enable mapi over https in exchange 2013, I enabled it by powershell cmdlet but when i want to test it it gives me error :D
help me plz :D

Hi,
We need to configure Exchange Server 2013 for mail flow and client access with the following steps.
Create a Send Connecter
Add Additional accepted domains.
Configure the default email address policy.
Configure External URL.
Step5: Configure Internal URL.
Configure an SSL certificate.
For more details, please refer to this document.
http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
If there is any further question, please let us know.
Best Regards.

Connection between PDA and desktop can not be established

I recently got the Palm T/X. I was able to upload the programs I needed, but now I can not establish a connection between the PDA and the computer. I even bought another USB hotsync cable thinking my original cable was faulty. Still no luck. I have noticed that the cable itself seems easy to plug into the PDA but I have to physically struggle to disconnect it from the PDA. Any idea what the problem could be? Thanks for any help.
Post relates to: Palm TX

The hotsync manager icon is there but it will not open. Tried to open it manually without success. I did get to the Palm InstallShield which said it would have to erase everything on the PDA to reconfigure the hotsync setup. Not willing to take that risk as I have some expensive medical software on there now. I have tried all 3 USB ports on my computer. Any other suggestions will be much appreciated. I simply want to HotSync!
Post relates to: Palm TX

How to establish an Oracle connection between server1 and server2

I am trying to establish an Oracle connection between server1 and server2 specifically, while logged into server2 launch OEM on server1. Can anyone help me out here on establishing this connections between the 2 servers. thank you inadvance

I am assuming this is 10g.
Same way you connect from your desktop to the server using the URL (e.g http://server1:1158/em).
But you have to ensure that server2 can see server1. They cannot see each other, then it is not OEM problem.
if it is not 10g, then let me know

HT4437 I just bought an Apple TV. I fail to establish a connection between Apple TV and my Mac Book Pro. The first time I tried Mac Book had Leopard as an operating system. I could at least see the Apple TV Screen. I updated my OS to Lion but now no coo

I have problems pairing my Apple TV with my Mac and Iphone 4s. There was some connection between MAC and the App.TV when my operating system was LEOPARD. I now have OS Lion and there is no connection. I also could not find the AirPlay icon on the my Iphone. What do I do? Any recommendations?

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

APO/BW: Verifying/Establishing a connection between BW and APO

Similar Messages

Maybe you are looking for