APO Consolidation location  for Storage Location MRP Area

We are using Storage Location MRP Area .
Our Scenario is like ->
1 Plant -> n MRP AREA -> n Storage Locations
We are using consolidation location determination rule .
But actually we observed SO requirement is appearing at plant level in APO instead of MRP level although stock confirmation is done is MRP Storage location level only .
Things are working fine if we dont use consolidation location rule . We also observed that confirmation sub-item in SO doesnt show confirmed Sub-location for consolidation location . Transportation lanes are also maintained but requirement should pass to MRP location which is actually not happening .
Please help , thanks .

HI Srinivas ,
ya GATP check is configured at sublocation level only .
While in case of consolidation location only comfirmed orders are appearing at Plant level  .
Also Stock transport requisitions are not getting transfered which is also a pain .

Similar Messages

  • MRP Relevance for Storage Location

    All SAP Gurus,
    In SPRO where we need to maintain MRP Relevance for Storage Location?
    Regards,

    Dear,
    Check transaction OMIR - Storage location - MRP relevance.
    In detail:
    To control whether a particular storage location will be included or excluded from the MRP run.  (MD02/MD41).
    To exclude it from MRP run follow the steps:-
    OMIR - Define storage location MRP per plant
    Put the MRP ind. as.         1 - storage location stock excluded for MRP
    To include it from MRP run:-
    OMIR - Define storage location MRP per plant
    Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
    Next go to transaction MM01 - tick only view MRP 2
    Key in Plant and Storage Location
    Look at the Storage Location MRP section
    change the SLoc MRP indicator to space  and save it
    MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
    You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
    Regards,
    Syed Hussain.
    Edited by: Syed Hussain on Sep 20, 2008 12:51 PM

  • MRP for storage locations

    Hi,
    One ROH material is extended to 2 storage locations (A,B). ROH is a BOM component for 2 intermediates.
    ROH Storage location A - Material Master
    ROH Storage location B
    Each tank cannot go less than 10 tonns and cannot exceed more than 50 tonns
    Re order point 25 tonns.
    Order lot size is 35 tonns.
    MRP will consider only one storage location A during requirements generation, becuase material master updated with storage location A only.
    My requirement like MRP should consider the both storage locations during MRP run and generate the requirements as per the re order point for inventory.
    Regards,
    LV

    Hello
    I suggest you to use MRP areas to plan each storage location separately.
    With MRP areas you can define different MRP parameters for each storage location and they can be planned independently.
    See the following link for more details:
    Determining and Assigning Storage Locations to the MRP Area - Special Planning Processes - SAP Library
    BR
    Caetano

  • System asking for storage location in case of Asset GR,

    dear all,
    In our case  system is asking for Storage Location in case of Asset GR, though PO was account assigned.
    I checked for the screen setting, but not getting any clue where to find that entry to make depressed.
    Pls guide,
    Regards.

    Hi,
    Are u using material code for assets or its a text based purchase, if material code is there (although non valuated / qty managed) it will still require sloc as system needs to store the qty in stock
    Reg
    dheeraj

  • Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

    Under the stock transfer order configuration, there is a IMG step <b>"Define Shipping Data for Storage Location".</b>
    In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
    The customer number is used a sold-to-party in outbound deliveries.
    <b>But I am not able to figure out what's the use of VENDOR number we are specifying in this step.</b>
    If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
    <b>Also I need to know what vendor account group I will use for creating this storage location vendor.</b>  I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
    <b>So I need to know-
    1. Which account group to use for creating storage location vendor
    2. What's the ultimaye use of this vendor code
    3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.</b>
    Thanks

    Hi,
    Define Shipping Data
    Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
    A goods receipt can be planned in the receiving plant.
    You can enter a vendor (transport vendor) in the stock transport order
    In IMG step "Define Shipping Data for Storage Location".
    You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
    Rewards If usful
    Regards
    Sanjay L

  • HU Configuration for Storage Location

    Hi everyone.
    In the following point of config, there is something I do not understand.
    I hope somebody can explain it to me.
    HU Requirement for Storage Locations and Default Values for Deliveries
    Are the Vendor and Customer needed in this table?
    If they are, what purpose do they serve? What are they needed for?
    And again, if they are, do they represent the Plant? or what?
    Should they be created with special characteristics?
    I know a lot of questions, But I do not understand.....
    Thanks,
    Alain

    Hello Alain,
    When you are making the storage location is HU managed, and when you try to execute any IM transactions like stock transfer, transfer posting, system doesn't directly post a material document unlike in regular non HU managed locations.
    For example if you try to execute MB1B-311 from HU managed location to non HU location, system tries to create an outbound delivery document. And to create this outbound delivery document you need a customer and this is the place where system gets that customer information. Same is the case for vendor in inbound delivery.
    And it doesn't require to create deliveries all the time if you want to execute these inventory transactions. VLMOVE transaction can be used to posting material document without deliveries.. But not all business scenarios will use VLMOVE as it has its own limitations.
    Regards
    Gopal

  • Table name or report to download materials for storage location

    Hi ,
    Please let me know table name or report or tcode to download material for storage location . I know MARD only. Apart from that table any other please let me knw
    Thanks in advance
    Smitha

    Hello,
    For Material , Plant and storage location report, in SAP Std reports are available.
    1)MC.6
    2)MC.9
    3)MB5b
    4)MB52
    or else get directly from table MARD through SE16 tcode.
    Regards
    Mahesh Naik

  • Table for storage location addresses

    Hi
    I am trying to find the table where addresses for storage locations are found. I have found the storage locations in T001L and the addresses in ADRC, but cannot find the link between these tables.
    In which table can I find the link between storage locations and addresses?
    Any help is greatly appreciated.
    Regards

    Hi,
    check TWLAD table.
    Regards,
    Chandra

  • Approval for storage location to storage location or plant to plant movemen

    Hi all,
    Our client's requirement is when goods transfer from the storage location to storage location with movement type 311 or plant to plant with movement type 301, untill & unless the authorised person at the receiving end approves it, the movement should not be happened?
    How to map this? Any release strategy?
    Thanks in advance.
    SmanS

    You can map the process in SAP using 2 step stock transfers.
    Storage location 1 313 movement type - it will be in transit until you do receiving in the receiving storage location 2 using movement type 315
    Similarly for plant to plant movement type 301 and 305.
    There is no customization available in SAP to do this with the single step stock transfers that you are currently using. 
    Thanks and Regards,
    Maheshwari

  • STO for storage location to storage location with delivery charges

    Dear Users,
    Please advice the configuration & pre-requisites for storage to storage location STO with delivery charges within a plant.
    Thanks & Regards,
    Shyam

    Moderator message:
    Please put some efforts into a search
    Storage location to storage location stock transfers have been many times discussed as well as delivery charges in UB stock transfer order.
    Do not just post your requirements and expect others to do your job.
    If you dont know how to search, then please see these blogs:
    A good way to search the forum is with google. See this blog with details for a good search
    Getting the Most out of Google: Optimizing Your Search Queries
    This blog describes how to use the SCN search:
    How to use SCN search
    The discussions are not a replacement for proper training
    Thread locked

  • Report for Storage location wise Stock with value..?

    Hi guru's
    Can anybody explain me what is T.code i want to use to get a report for STORAGE LOCATION STOCK  with VALUE..?
    Urgent reply me  ..
    Thanks
    sap-mm

    Sorry Mr chetan,
    I want to see only the stock available in my company with Value and storage location wise..
    Please try to get report for this
    Thanks
    sap-mm

  • Negative stock  for storage location M7 021

    Hello
    I use negative stock for some materials
    When I want to post document in MIGO - 551 scrapping, I have error message M7 021: Deficit of BA Unrestricted-use 1.100 EA:   24000641 XXXX 9999 YYYYYYY
    This is ERROR. When I change storage location from 9999 to 0002 message have status WARNING.
    I set - allowed negative stock in material master data MM02 and for plant in WB02
    Where should I set "allowed negative stock" for storage location, because I need warning for location 0002?
    Could You help me?
    Thank You in advance
    Arek

    Go to SPRO>MM>IM>Goods Issue/Transfer posting>Allow negitive stock allowed for plant and then chose the plant and then go for the storage location --> mark the same.
    If use ful award points

  • Problem in Address update for storage location via LSMW

    I am trying to update the address of storage location thru LSMW,
    Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
    How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
    Currently my recording only takes me to the create storage location & no LHS 'dialogue structure'  for 'Addressees for storage location'
    Please give the suggestions as I its on urgent for me to update 1000 storage location.

    Dearrrrrrr Prasoooon,
    U got it Right Again!!!!!
    Thank you so much.
    I resolved with above Note & now i can happily go on leave from tomorrow.
    Salute to you!!!!!!!!

  • Table for Storage location name..

    Hi frnds,
    I have a storage location number.. Now how do i find the name or Description for that?
    How to find the table? ,, If anybody knows the table name plz let me know..
    Thank you.
    Sree.

    Hi,
       CHeck Table MARD for storage Location
    Regards,
    Prashant

  • Classification System for Storage location

    Hello,
    I would like to know if you can apply the classification system (as we know it well from the material master), to classify the storage location configuration. I need this for a client who wants to analyze his information system with the possibility to drilldown the characterics of his storage locations. But to do this, he first would have to apply the classification system to these storage locations, but I can not figure out if it is possible, and where to customize it.
    Thank you in advance for your help,
    Dominik Ley
    DTI Consultores
    Chile

    yk,
    perhaps it is even some kind of weird, but for 2 reasons I dared to make the question:
    - Classification system is a cross-application component (Material Management, Project System, etc.), so why not for something like storage location.
    - For Plants you DO HAVE this classification. Go to CL02 and have a look on matchcode of 'Class type' field. So, my idea was to check if there was something similar for storage location.
    If you do have any other idea, or anyone else, I appreciate a lot your help.
    Regards,
    Dominik Ley

Maybe you are looking for