APO DP - deactivation of a planning object structure

I am using APO DP V5.
When trying to deactivate a planning object structure, I get message /SAPAPO/TSM792, and cannot deactivate.
Any ideas on this?
Thanks,
Bob Austin.

Hi Bob
Please check whether your planning area (planning area used to POS) is
linked to consumption group.
If Planning area is linked to consumption group, you might get such a error
message.
You can check whether your planning area linked to consumption group or not
in following menu.
IMG->APO->SCP->DP->Basic Setting->Consumption->Maintain consumption group
if it is related, please cut the link and try to deactivate again
best regards
keiji

Similar Messages

APO DP - product characteristic in planning object structure

I am using APO DP V5.
In my planning object structure I am using a bespoke characteristic ZPRD for product. I have navigation attributes for this characteristic, which is why I am not using the standard 9AMATNR characteristic. So, in my planning object structure, I assign ZPRD as the product chaarcteristic (via Edit > Assign prod/loc).
I have defined ZPRD as character 40, with conversion routine PRODU - so that it is consistent with 9AMATNR.
In my solution we are integrating APO DP with a SAP ECC system, where of course the product is defined as character 18.
So, my question is: does ZPRD have to be character 40 (to be consistent with 9AMATNR), or could I defined it as character 18?
Thanks,
Bob Austin, Atos Origin

HI,
You can define the product out put lengh in customizing setting of APO.
And also this setting is independent of R/3 system.Kindly refer
the following help information on this customizing setting:
'Specify Output Format of Product Number
Dependencies
Effects on SAP R/3 systems via SAP APO Core Interface (CIF):
The settings made here are independent of the SAP R/3 system and only
influence the conversion of the internal SAP APO display to external SAP
APO display.
As with conversion of SAP APO data, there is also a similar conversion
of the internal SAP R/3 display to external SAP R/3 display. So that the
numbers also appear immediately on the interface, it is recommended that
you use a corresponding conversion in SAP APO and in SAP R/3.
If the SAP APO is planning for several SAP R/3 systems, it may be
necessary to make the identical numbers from different SAP R/3 systems
unique in SAP APO. It is usual to use a prefix or suffix to do this. In
this case, the internal SAP R/3 display and the internal SAP APO display
are different. The conversion between the internal and external SAP APO
display thus also differs from the conversion in SAP R/3.'
Hope this will helps you.
Regards,
Sunitha.

Planning object structure

Dear friends,
in a new APO system i want to create planning object structure. when i tried to create planning object structure i got an error saying Invalid planning object structure. its just not letting me create POS. pls guide.
Thanks

Hi Vinay,
Please check on the following
1) Check the naming convention for the POS that you are creating, like whether it has any special characters etc.,
2) Check whether the sap notes 1106607 & 1098568 are relevant for you
Regards
R. Senthil mareeswaran.

Planning Object Structure not getting saved.

HI,
I had deactivated the PA and then the POS. I had included a new chara and then when I try to save, it gives the following message.
Planning object structure ABCD not saved
Message no. /SAPAPO/TSM173
I had done the same steps for other POS and it had worked correctly. but for this getting a strange error.
Can someone help me out in this....
Thanks
Aswath.

Thanks Datta for the reply.
When I run the cons. check for the POS after adding the new Chara. it says " No error".
We are using the consumption groups and i am not sure if that could create any issue, these are the steps I follow.
Deleted transaction data. - BM, BR FC, FA,
changed or deleted the Consumption group.
deleted the time series for PA.
Deactivated the POS.
After adding this new chara. its not getting saved.
But when I come out, without adding any chara. and right click, activate & POS gets activated.
I had gone and checked the Chara consistency in the cube. there also it says no error....
Thanks
Aswath.

"Planning object structure name 9ADCBAS is invalid"

Hello
New SCM 5.0 system
I'm trying to enter any Planning Object Structure and get the same issue as above.
I have had a look at this link Planning object structure name 9ADPBAS is invalid but the suggestion of activating all BW content doesn't seem to have resolved the issue. I have activated all InfoObjects in the Admin Workbench.
Any help would be appreciated
Thanks
SC

Hi
Following several responses from our BASIS team, and OSS providing support we have resolved this issue, by completing the following;
1.     Installation of Notes
Installation of a series of notes (see below) along with all related notes and patches identified within these notes.
     1019055
     1005848
2.     Activation of BI Content
     Ensure that the batch program BI_TCO_ACTIVATION has completed successfully (otherwise run manually)
     Activation of Characteristics
Transacation RSA1
BI Content
Select Infoobjects by Infoarea
Unassigned Nodes --> Unassigned Characteristcs
Drag and Drop Unassigned chaaracteristics to Collected Objects
Click on Install and save as Local object.
     Activation of Key figures
Transacation RSA1
BI Content
Select Infoobjects by Infoarea
Unassigned Nodes --> Unassigned Characteristcs
Drag and Drop Unassigned chaaracteristics to Collected Objects
Click on Install and save as Local object.

Planning object structure name 9ADPBAS is invalid

i am trying to access the DP planning book but then it pops up with this error "Planning object structure name 9ADPBAS is invalid".
can anyone tell me as to why is this happening and is there a way to resolve it.
Thank you in advance.
suresh garg

Hi Somnath,
We are on SCM 5.0 and face a similar issue
After the installation the standard MPOS - 9ADPBAS and the Planning Area 9ADP01 are not initialized.
This is even before the custom planning areas and MPOS is transported.
Is there an installation issue here or is it normal for this to remain inactive after the installation ?
I also read a previous note by you on a similar issue ( 9ADPBAS) that said -
Can you check what is the entry against your user name in transaction Assign User to Planning Book (/SAPAPO/SDPPLBK). Make sure that against transaction /SAPAPO/SDP94 the planning book and one of the data views of the planning book are correctly mentioned. If not add the entry and save while exiting. Next time you open Interactive Demand Planning the error should not come.++
This is assuming that the planning book / data view you are trying to access is not linked to Planning Object Strcuture 9ADPBAS "
Is there a way to rectify this while setting up the system ?
Or
Should we go by setting up the user in the trasaction (/SAPAPO/SDPPLBK)
Or
Is there any other option.
Please advice.
Regards,
Liz

Characteristics in Planning object structure

HI,
When we create any Master Planning object structure ( MPOS)we see characteristics at right side of MPOS from where we have to select the required characteristics to left side and then these characteristics would be a part of our MPOS.
My question is from where these characteristics comes from. I looked at RSA1 and it seems they comes from there but some of them comes from unassigned nodes and some from Info providers.
Could any one tell me the logic of the characterists that appears while creating MPOS.
Thanks in advance.
Regards, Mukesh

Hello Sujay,
Thanks for your help.
I just want to understand the differences in characteristics that I see in RSD1 and I see in RSA1 ( assigned and un-assigned nodes both).
In RSD1 do we all characteristis that we see in RSA1.
Thanks in advance.
Regards, Mukesh

Master Planning Object Structure

Hi Everybody,
Can any one please clarify my doubt as to whether the MPOS (or Master Planning Object Structure) has characteristics or key figures or both of them?
Thanks & Regards,
Ujwal Arora
SAP Support Consultant

Hi ,
MPOS only have the characteristics value not keyfigures,
The planning area only having your keyfigures values.
The value of the characteristics which is stored in planning area that's why you refencing your MPOS in planning area while creation.
Let me know if you need more information.
Regards,
Prabhu

Planning object structure name 9ASNPBAS is invalid

Hi Friends,
We installed a new SCM5.0 but we find that the SAP Satndard POS 9ADPBAS / 9ASNPBAS etc are invalid. Is there any specific settings to activate them?
Thanks in advance for your help.
Sam

Sam,
Looks like the standard 9A* Infoobjects are missing in the system.
You then need to activate them from business content. Some of them are used in the standard planning object structures and hence, the error message you get.
Please goto rsa1, Business Content and activate 9A* Infoobjects
from the business content or run program /SAPAPO/TS_D_OBJECTS_COPY.
These are worth trying while waiting for SAPs reply
Thanks
Prince Jose

Use of Dimensions in APO DP Planning Object Structures

In APO DP Planning Objct Structures, I know that it's possible to assign Dimensions to characteristics.
The standard help documentation suggests this is 'to improve performance'.
Can anyone give practical guidance about how to assign Dimensions to improve performance?
Thanks,
Bob Austin

the characterisitcs are grouped logically using the Dimensions
the use of dimensions allows data to be stored in a combination of dimension tables and fact tables
the dimention table consists of the dimension number, a primary key characteristics you assign to the dimension
the primary keys from various dimension tables link up at the fact table and to the values stored in it
so you can think of a star schema of tables with the dimension acting as the link
so when you look for a particular value the dimension table is first quesried based on which the fact table the primary key is linked to is looked up
in order to improve performance, make sure you dont assign too many characterisitics to one dimension
try to logically group the characterisitics - geography for eg can be made of state, region (not material type)
you can also try to match the dimension with the selections you will be using in the planning book,
dimension tables could grow as your characteristic values increase so SAP advices you keep an eye on it (i am not sure of how functionally you can help this but i believe basis will be able to help you with allocating space on an oversized table)
there is a document somewhere in sap marketplace that i am not able to find a link... hopefully someone will link it up here

Planning object structure ATP_ALL: "Error occured during activation"

Hi,
I'm working with pl object structure ATP_ALL in the IDES (SCM 5.0) system. Problem is I get an error saying "Error occured during activation" when I try to activate it.
Reason I was trying to activate it is because I first deactivated it. The reason for that was that it did not work for product allocations in GATP. But somehow it cannot be activated again...
I have checked all objects in the pl object structure using tr code RSD1; they are all active. I have also program /sapapo/ts_d_objects_copy to make sure that all objects are activated. Trying again I still get the same error.
Any ideas?
Best regards,
Ozgur

atoub24 wrote:
Does anybody else get this? My facetime worked perfectly fine before and all of a sudden I started to get this message. Ive tried logging in from a different facetime account and it tells me the same thing. It won't let me make a new account, it just takes me to a white screen. Any suggestions. Thanks and Happy Holidays.
Welcome to Discussions, atoub24
FaceTime need be activated only once. You should not need to change the account info once FaceTime is working.
Restarting your iPod may eliminate the error message: http://support.apple.com/kb/HT1430
If not, see http://www.apple.com/support/ipodtouch/facetime/
If nothing resolves the problem, take the iPod back to your retailer for service or replacement.
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Delete CVC for Planning object structure relevant for DP BOM

Hi,
We have created a new client. The selection BOM char comb ID and BOM Prod Type (I/O) values are not availabe in program Delete CVC combination.
Is some configuration is missing.
Kindly advise to resolve this issue.
thanks and regards
Murugesan

Hi Raj,
Your question is as below:
How the system knows or where i need to tell my demand from demand planning book X need to transfer
SNP planning book - 9ASNP94
In the release transaction i.e. /SAPAPO/MC90 , we need to give the target version .
Each version is assigned to exactly one Planning Area( though one PA may have more than one versions. Secondly at a time only one version will be active and in SNP / PPDS the Active version is always '000' which is connected to SAP ERP systems.
Therefore when , we mention the version, system know the planning area.
Hope this helps.
Regards,
Datta

Planning object structure ID 9ASNPBAS is invalid

Hello,
We have just done a fresh installation of SCM 7.0 and are getting the above error with the standard SAP MPOS.
Any pointers on cause and resolution?
Regards,
Shivaditya Singh

Dear Shiva,
The problem usually occurs if not all InfoObjects Can Be Read. You need to ask your BW colleagues to help to repair the InfoObject for POS 9ASNPBAS:
Repair the InfoObject: From the Data Warehousing Workbench click on the 'InfoObject' pushbutton to branch to InfoObject maintenance (or choose transaction RSD1). Choose the function Extras > Repair InfoObject. Set the processing so that the repair can be executed (default setting is test mode) and choose Execute.
Also kindly review all basis related settings required for fresh installation. I think some settings related to Data warehousing is missing.
Best regards,
Vaibhav

RE: Need help on cornering the APO BI issue relevant to Planning area

HI Guys,
Iam loading historical data from my infocube to APO planning area...
MY Planning will be done in apo for weekly based..
for thatmy client has configuired Fisc VArnt which is
specific for 48 periods but not 52 periods...
My clinet will be planning in week which will will be like it starts from 07.01.2010,
14.01.2010,21.01.2010,31.01.2010..
but for testing purpose we are taking thisfrom a flat file andloaded into the infocube..
and created gen export datasource into scmapo system and loaded into cune from that cube iam feeding itto planning area..
when I execute the transaction /n/sapapo/tscube tha data copied was successful,
but the keyfigure amnt when I saw in the planning area Transaction /n.sapapo.sdp94which will be distributed across the week.
lets say my keyfigure values is 100 in the infocube for the jan month and week 1
and the value which i CAN SEE IN THE PLANNING AREA IS week1 25 week 2 25 week 3 25 and week 4 25
which will be 100 total for amonth,
but it should not be like that 100 should go into a particular week and should display 100 for that particular week..
I have calmonth calday, fiscper(posting period) which we have maintained in ob29 as 48 periods
when i derived calweek in the transformation iam getting 48 weeks but
when i try to load it to planning area iAM GETTING AN ERROR LIKECOMBINATION IS INCONSISTENT..with the calmonth
CODE WHICH i HAVE DERIVED CALWEEK FROM CALDAY:
DATA: lv_year(4) TYPE c,
lv_month(2) TYPE c,
lv_day(2) TYPE c,
lv_result(6) TYPE c,
v_poper TYPE poper.
lv_year = SOURCE_FIELDS-calday+0(4).
lv_month = SOURCE_FIELDS-calday+4(2).
lv_day = SOURCE_FIELDS-calday+6(2).
SELECT SINGLE poper FROM t009b INTO v_poper WHERE bumon = lv_month
AND butag = lv_day.
IF sy-subrc = 0.
CONCATENATE lv_year v_poper+1(2) INTO lv_result.
RESULT = lv_result.
CLEAR: lv_result.
ENDIF.
gURUS CAN ANY BODY THROW SOME LIGHT ON THIS.. iWILL BE HIGHLY OBLIGED
when i load the data from infocube to planning arae using /SAPAPO/TSCCUBE, the copy was succeeful.. But the issue is the keyfigure value is dis aggregating..
For ex If my sales hostory for week 1 001.2010 and for calmonth 01.2010 is 100, but it is disaggegating the values for whole month 4 weeks as 25,25,25,25 but it needs to b written as 100 for week 1.rather it should be aggregated on the highlevel as 100 for week 1.
Do I need to check any Charecterstics combination but all are consistent....
Even the periodicities in the planning area and infocube are consistent , since i am able to copy in to planning area..
I dont have calweek in my infocube i have derived calweek with logic provided in my earlier thread, but as of now iam going with calyear and calmonth, fisper3 (postig period), since 48 posting periods are maintained in the 0b29 or t009b tables.
whether I need to implement any oss notes for this, If I include calweek and calmonth and try to copy in to planning area Iam getting an error periodicities are not matching SAP Note 1408753 - /sapapo/tscube wrong error message
/SAPAPO/TSM 232
Regards
Balaram

thnx for replying the thread..
Where do I maintain this the PLANNING OBJECT STRUCTURE(STOR BKT Profile) and Planning Book-data View(Time Bkt Profile) with the time periodicities for Fisc Varnt and Posting period specificu2026
Can you pls elaborate on this Iam new to APO BW implementation part, Sine this is a burning issue
Actually what seeting I need to do there, I think infocube structures are good and copying data in to planning area..
I have calmonth and Fiscper3 for 48 periods in my infocube
also whether I need to maintain any calweek in the PLANNING OBJECT STRUCTURE(STOR BKT Profile) and Planning Book-data View(Time Bkt Profile)
when I checked in planning book keyfigure overview it is maintained there for 48 periods
For Planning Book-data View(Time Bkt Profile) how can we achieve this...
If you could throw some light more on this I have my APO Counter part I will ask him to change the master planning structure accordingly
Regards
Ram

General Discussion - Why to choose APO over R/3 for planning?

Hi All,
Why do we choose APO over R/3 for planning? What are the inputs or other factors that make APO a better planning tool?
Are the factors which make APO a better tool not available foe R/3 planning?
Thanks in advance
Changed subject suitably.
Message was edited by:
Somnath Manna

I do aggree what other have mentioned .Here are specific inputs on newly desined process in APO in comparisosn with R/3
1. Existing Processes in SAP R/3
Forecasting
Forecasting enables companies to run statistical forecasting model, aggregate and disaggregate forecasts, as well as the capability to modify forecasting numbers manually
Newly-Designed Processes
Demand Planning DP (SAP APO)
Demand Planning adds to forecasting capabilities to manage promotions, product introductions and phase outs, as well as the impact o causal factors, like weather or macro economic data.
Additional forecasting techniques are available like Linear Regression (Causal Factors), Croston Method (Slow Moving Items) and Weighted Average
Consensus based Planning enables Marketing, Sales, Logistics to share and collaborate on their forecast and create a final consensus forecast
Forecasting based on characteristics instead of SKU for configured products
2. Existing Processes in SAP R/3
Sales & Operations Planning
SOP allows to consolidate forecast based on supply capabilities, through reporting and interactive planning capabilities.
Newly-Designed Processes
Supply Network Planning SNP (SAP APO)
Demand and Supply Plans can be intelligently balanced leveraging cost or/and revenue based optimization techniques
Trade-off Analysis to determine product-mix, inventory build ups for seasonal demand, capacity allocations for alternative manufacturing locations etc.
Web based information sharing and collaborative interactive planning environment
KPI Reporting
3. Existing Processes in SAP R/3
Distribution Requirements Planning
Traditional DRP logic allows to calculate requirements for a single stage distribution network
Newly-Designed Processes
Supply Network Planning SNP (SAP APO)
Supply Network Heuristic enables to run DRP across the complete supply network generating requirements (production and purchasing) at each node.
The planner can easily navigate through the network to view and modify demands and supplys in their different categories
Demand Planning Units and Stock Keeping Units mapping can be done on quotations.
4. Existing Processes in SAP R/3
Not available
Newly-Designed Processes
Deployment SNP (SAP APO)
The ability to deploy products through the supply network based on pull or push concepts. Different heuristics like fair share logics are supported.
Transport Load Building allows to combine different products to a single load, interactive, as well as via heuristic to create full truck loads.
5. Existing Processes in SAP R/3
Master Planning
Master Planning allows to plan production at an aggregated level including rough cut capacity planning.
Newly-Designed Processes
Supply Network Planning SNP (SAP APO)
Supply Network Planning allows to consider distribution, production and transportation constraints concurrently.
In addition to a generic SNP Optimizer based on Linear Programming and capacity leveling algorithms, industry specific optimization is available for
Campaign Optimization
Capable to Match
6. Existing Processes in SAP R/3
Material Requirements Planning
MRP calculates material requirements based on BOM structures, lead times, lot sizes etc.
Capacity Planning
CRP in a second step looks at the capacity requirements
Newly-Designed Processes
Production Planning PP/DS (SAP APO)
Production Planning allows to consider material and capacity constraints simultaneously to derive material, capacity requirements and dynamic lead times. BOMs and lot sizing will be also considered
Pegging relationships between customer order, production orders, purchase orders will be stored and enable bi-directional propagation if changes occur on the demand or supply side
7. Existing Processes in SAP R/3
Transportation Planning
Manual Planning of shipments, including predefined master routes.
Newly-Designed Processes
Transportation Planning TP/VS (SAP APO)
Transportation Planning enables companies to determine the right shipment mode and route based on demand and supply situation, considering transportation constraints and costs.
8. Existing Processes in SAP R/3
Shop Floor Scheduling and Assembly Processing
Planning Table to view in a Gant Chart the schedule.
Heuristics like forward/backward scheduling (infinite)
Manual scheduling
Newly-Designed Processes
Detailed Scheduling PP/DS (SAP APO)
Finite and infinite scheduling, considering material, capacity, time and market constraints.
Manual scheduling
Scheduling optimization via optimization algorithms, like
Genetic Algorithm
Constraint based Propagation
Kiran Kute

APO DP - deactivation of a planning object structure

Similar Messages

Maybe you are looking for