APO DP - use of key figure change mode 'Redisaggregate'

I am using the macrobuilder in APO DP V5.
Here one can use a 'redisaggregate' change mode for a key figure.
But what is a practical example where this could be relevant and useful?
Thanks,
Bob Austin, Atos Origin

Srinivas,
Thanks for this.
I now understand the concept.
But what does the 'redisaggregate macro' look like?
Suppose I have key figure X with disaggregate key figure APODPDANT.
I have a fcst run at high level, and I recalculate APODPDANT.
What is the structure of the macro to now apply the new APODPDANT values?
Is it something like key figure Y (change mode = redisagg) = key figure X?
Thanks,
Bob.

Similar Messages

Defination and use of key figure in copa

dear experts,
   i'm new to co-pa.
   can anyone explain to me the defination and use of key figure in copa??
many thanks
mu

Hi!
Generally you use key figure for defining calculated values for use as tracing factors for cost center assessment to COPA.
    You can use for this t.code KE2K as define calculated values as reference values.
For Ex.
Key Figure R1 contains below value fields through formula :
R1 = ERLOS + VV00 + VV01 + VV02
where ERLOS = Revenue
VV00 = Exports Revenue
VV01 = Domestic Discount
VV02 = Exports Discount
So, this key figure you can use as a base for tracing factors for cost cetner assessment to COPA.
Hope it will clear to you. Pls ask for any further query.
Thanks & Regards,
Taral Patel

Using Virtual Key Figures/ Characteristics is possible to use in InfoSets

Hi All,
Is it possible Using Virtual Key Figures/ Characteristics is possible to use in InfoSets?
I have tried all the possibilities using the BADI implementation RSR_OLAP_BADI without success.
The VKF / Characteristics works fine when it is being used with a query based on the ODS however it is not populated when i am using the infoset. Moreover i have used the code for InfoSet as well it is not working.
I would appreciate any help in this regard.
Regards
Noor

Hi PV,
r u sure about that, as i have tried all sort of permutation and combinations for using the same in RSR_OLAP_BADI without any luck.
I have the got felling about the same however if you look into the following SAP note it puts me into doubt.
Note 657690 - Virtual characteristics and key figures in InfoSets
Note 618738 - Virtual characteristics or key figures and InfoSets.
It describe about using the RSR00002.
Many thanks for the information.
Kind Regards
Noor

Can i use the key figure total delivery time in days in rows and how is can

Dear all,
Can i use the key figure total delivery time in days in rows and how is can.but all the key figures r used in rows but i cannot use in column.i want bothin rows and in column at a time ,can this is possible,and how.

Hi,
yes you can.You will have to use structure in the row.
Right click on the row and create a new structure.
In this structure you can add key figure.
Maximum number of structure a query can have is two
Please assign points if it helped you.
Regards,
Senoy

Calculating count of orders using virtual key figures

Hi All,
In my report, i need a counter for the number of distinct orders.
1ROWCOUNT didnt work for me as i want the count of distinct orders alone.
I am planning to use virtual key figure for this..
However, i donno how to code this in ZXRSRU02 and ZXRSRZZZ.
Any help on this would be great!!
Thanks!
- Arun KK

Shana,
I dont understand your question.
I'll give an eg.
this is how the cube is.
Order | Desc | Location
101 |   'X' | loc01
101 |   'X' | loc02
102 |   'Y' | loc01
103 |   'Z' | loc01
102 |   'Y' | loc02
in the report, i need the o/p to be.
Order | Desc | count
101 |   'X' | 1
102 |   'Y' | 1
103 |   'Z' | 1
i cant use 1rowcount as that counts each row and not the service orders.
Hope this answers your question.
Please let me know if there is a solution for this.
Thanks!
~ Arun KK

Problems using virtual key figures

Hi experts,
I have got 2 questions regarding virtual key figures, by using the OLAP BADI
1. Is there a chance to get the variable values out of the variable selection screen in the BADI implemtentation? If so, how?.
2. In the compute method the assign does not work because the Attributes (p_kyf_ZIMCREDAY, p_cha_0material,p_cha_0calday) are 0 all the time.
How does the attribute get a correct assignment to a component name? See my coding of the define and compute method below.
Thanks and Regards, Mario
IF_EX_RSR_OLAP_BADI~DEFINE
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
CASE i_s_rkb1d-infocube.
WHEN 'ZD_IMC001'.
l_s_chanm-chanm = '0MATERIAL'.
l_s_chanm-mode = rrke_c_mode-read.
APPEND l_s_chanm TO c_t_chanm.
l_s_chanm-chanm = '0CALDAY'.
l_s_chanm-mode = rrke_c_mode-read.
APPEND l_s_chanm TO c_t_chanm.
APPEND 'ZIMCREDAY' TO c_t_kyfnm.
ENDCASE.
IF_EX_RSR_OLAP_BADI~COMPUTE
FIELD-SYMBOLS <fs_ZIMCREDAY> TYPE ANY.
FIELD-SYMBOLS <fs_material> TYPE ANY.
FIELD-SYMBOLS : <fs_calday> TYPE ANY.
ASSIGN COMPONENT p_kyf_ZIMCREDAY OF STRUCTURE c_s_data
TO <fs_ZIMCREDAY>.
ASSIGN COMPONENT p_cha_0material OF STRUCTURE c_s_data "p_cha_0material
TO <fs_material>.
ASSIGN COMPONENT p_cha_0calday OF STRUCTURE c_s_data "p_cha_0calday
TO <fs_calday>.

Regarding 1.
I checked in debugging the variable I_TH_SFC in the initialize method, but there is no information regarding the selections in the variable popup.
Can you please explain in detail how to access the variable values.
Regarding 2.
I changed l_s_chanm-mode to rrke_c_mode-no_selection according to your recommendation.
Unfortunately it´s still the same. The attributes still does have the value 0. Therefore the assign does not work correct.
The attributes are defined with type i. But the component names are like 'K____132'. Is this the cause of the problem?
Thanks, Mario

PLANNING BOOK (SDP94) KEY FIGURES EDITABLE MODE SETTINGS

Hi,
I am unable to get editable mode of one of the key figure(Distribution receipt confirmed) of SNP planning book using t code SDP94. Kindly help me out in getting the same.
The following are the details which i tried:
Opened SDP94 in change mode and clicked on design mode. Then right clicked on the Key figure, activated input/ouput mode and then saved.. Still i am unable to enter into the change mode of SDP94 of that key figure.
Regards
KPNMurthy

Hi Aparna,
Sorry for the delayed reply. After thorough investigation with our business people, we have come cross with different solution, instead of creating a new Zfigure which occupies more database. Thanks a lot for your prompt reply. Rewarding you for the same.
Regards
KPN Murthy

Use of key figure 9ADFCST in SNP

I am using APO V5.1.
In particular I'm using SNP heuristics, and we have forecasts in the standard key figure 9ADFCST.
As I understand it, this key figure contains the 'unconsumed forecast', and so is the original forecast (from APO DP) minus open sales orders and minus sales order despatches.
I want to be able to distinguish between the situation where 9ADFCST is zero because the original forecast is zero (and we have no sales orders), and where 9ADFCST is zero because it has been fully consumed by sales orders/despatches.
Any advice on this would be appreciated...

Hi,
I would recommend that you do not touch the 9ADFCST Key Figure and add a new Time Series KF for storing the original forecast (let's say CORFCST).
When you release forecast from DP to SNP, in a next step, also copy your DP forecast to CORFCST using the program /SAPAPO/RTSCOPY.
So, use original forecast KF CORFCST to see the values of the forecast that came out of DP, while 9ADFCST will tell you how much unconsumed forecast remains. When both values are zero, it's clear that your forecasted value was zero, otherwise, you could find out the original forecast using the KF CORFCST.
Of course, other option is to go to forecast tab in RRP3 (product view) and check the consumption situation (how much of the forecast is consumed vs how much was available initially).
Hope this helps.
Thanks - Pawan

How to use existing Key figure strecture ??

Guys,
I am creating a new query from the existing query on the same Multi provider.
So, i created a copy of the query using RSZC and gave a new technical name. But the problem is both the query has the same Key figure strecture. and i have to modify that strecture in the new query. If i am not wrong then if i do any changes then it will affect all the queries ...right ?
So, for that in my new query i did right click on strecture and did "Remove Reference" and saved it.
Can i modify now ??? i am not sure, if i do some changes in the new query , but both the key strecture will have same techinacal name.
will it modify everywhere? or should i copy that key strecture and give diff. tech. name and then do changes ???
please giveme your precisios thoughts ....
thanx

experts ! i m stuck !!! need help
i created a copy of my query using rszc, then did remove refrence and then saved the strecture with diff. tech. name.
Now, in my new query i have a same strecture from old query . but with diff. tech. name... so basically 2 diff. strecture.
if i do where-used list in my new query strecture, i dont find any refrence...so thats fine.
But, the problem is , now i made some changes to the new strecture, and wanted to remove some old stuf ( which was came when i did copy ). If i right click and do remove, its giving me an error...."Element cannot be deleted because it is still being used. "
But where ???? in where-used it says " No refrence to external queries Found"
whats the problem ??
Thanx in advance

Input readiness when "Local calculations" on key figure changes

Hi all,
i have a planning query with a key figure, posting period and fiscal year (just naming the important chars). the query is input ready but calculates the wrong result. so i wanted to change the way it calculates the result in the query designer, under the "calculations" tab i changed the "Local calculations" - "Calculate the result as" into e.g. "Last Value" (or average, or anything). The key figure then ceases to be input ready in a given workbook.
any ideas why this happens? what is the connection between the results calculation and input readiness?
Another line of thought for the same problem:
for a given year i need this key figure to be the same for all 12 posting periods and the calculated result to be that same number. I do not want to use fiscal year/period (0fiscper) characteristic since i then can not make a flexible tool able to work always for the same 12 periods but for different years.
is there maybe a way to make the aggregation level to derive the 0fiscper automatically from posting period and fiscal year so that when i include all three into the agg level, the query is input ready even when i don't restrict the 0fiscper?
thanks in advance,
K.

Hi friends,
Even we are facing the same problem...
Can anyone tel me why this is happening or Is it an artifact of the 7.1 GUI ?
Regards...
Balaji

WF_EXTSRV: use PDF Form in Change mode in Portal:

Hai,
I'am trying to use transaction WF_EXTSRV to generate a task which can be used within the UWL from the portal. The main purpose of this task is to show an exsisting PDF form in change mode. I allready found some nice information from SDN, but not enough to make it all work. I still have still these questions:
1) How must I setup the required fields within transaction WF_EXTSRV when I want to generate for example this url:
http://abc.abc.nl:51800/webdynpro/dispatcher/sap.com/pcui_gp~isr/IsrForm?SCENARIO=SPEG&MODE=CHANGE&NOTIF_NO=000600000003
2) How must a then setup transaction SWFVISU? Which apllication and package name.
I hope some can help me.
Greetings,
Remco

Hi,
When do you get this error ... "No scenario specified". ???
I mean did you try creating an iview for IsrForm Java WD application sending the Scenario name as parameter?
Betn us,
Why dont you try the parameter IFV='P' for IsrFormApprove Java WD application itself. Get to know more about this parameter in these threads...
Re: Buttons for ISR_APPROVE & ISR_PROCESS appearing in Workflow
https://forums.sdn.sap.com/click.jspa?searchID=165819&messageID=1268222
Regards,
<i><b>Raja Sekhar</b></i>

Using + and - keys to change dates and times; Find and Replace event

Hi all, \
I have two iCal related questions. One has been bugging me since the Snow Leopard upgrade and the other I'm just wondering about.
1. Is it just me or is it no longer possible to use the + and - keys to increment dates and times when editing an event? It seems that now I have to actually type in the numerals instead. Is there something in the preferences I'm missing or is that just the way it is now? Seems like a step backward, if so.
2. Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se? I just want to rename the event itself.

Don,
...is it no longer possible to use the + and - keys to increment dates and times when editing an event?
I did not know that was possible. Try using the ↑/↓ arrow keys to increment numbers, and →/← arrow keys to change fields.
Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se?
AFAIK, you have to use the search field to find the individual events, and change them when you click on the events in the search results field.
;~)

Getting error while trying to use restrcted key figures in bo, please help

there is query in the BW on which the query is developed with some restrictive key figures
when we import this query into bo all fine
but when we tried to use these restricted key fig i am getting this error
there no problem of importing all other queries only on this cube, the quereis on this cube
i got error like this.. ALL IN THE BOX
web intelligence
X      Query 1 - ITLT Dashboard-Group Cost & Category (HFM)
         A database error occured. the data base error text is : The MDX query SELECT
         [Measure],[ 4L93.....
         COLOUMNS,NON EMPTY HIERARCHIZE (UNION ([Z_S_FUC
      INCLUDING[OFISCPER3].[001]failed to execute with the error unknown error, 9WIS 10901)
                                         CLOSE             HELP

I am moving this post to the Webi forum as the issue seems to be related to webi using data from BW.
The OnDemand forum is specifically about the crystalreports.com and bi.ondemand.com applications.
Cheers
Steve

Calculated Key figures using different key figures

Hi All,
I want to create a calculated key figure based on Actual and Plan.Actual values are coming from InfoCube,Plan values are loaded from Excel sheet into different key figure in another infocube.I've created a MultiProvider for these Cubes.Now I want to find the difference between plan and actual.So I created a calculated keyfigures based on the key figures.But the Query is giving error ..
Then the connection terminated..
Let me know how to do..
Raji

What is the error you are getting?
First do this.
In the query, filter on only 1 infoprovider. Check the KF's and see if correct and if you get the error. Then, do the same thing, for the other infoproviders. Once you get no errors that way. Remove the filter. See if the KF's are ok and no errors. Then do your calculation.
Also, make sure in the definition of the KF's, you are filtering each on the right infoprovider. (For instance, KF1 has a filter on infoprovider1 and KF2 has a filter on infoprovider2.)
hope this helps!
/smw

Use of key figure based on period

Hello All,
I have 2 key figures in my multiprovider, e.g. Actual Amount and Budget Amount. I need to display one of the key figure based on period. Reports have January to December columns. Now, if current period is October, I have to display Actual Amount from January to October. For future periods i.e. November & December, I need to show Budget Amount.
Can anoybody please provide a solution for this? How should I proceed?
Thanks and Kind regards,
Ajay

HI Ajay
Looks like you are creating a Capital Forecasting report. In order to show amounts period by period what you need to do is
- Create one key figure for actual amount which might be based on 0Amount key figure with Debit/Credit indicator as S. (If this is not the case then please do so according to your requirement)
- Create one key figure for Budget amount (according to your requirement)
- Create one customer exit "Formula" variable called actual indicator. This variable will be populated with a number of 1 to 12 for each record in your cube based on the user entered month. i.e. if user enters October. assume your cube has 12 records one for each month the first 10 records will be populated with 1 and the records for Nov and Dec will be populated with a 0.
- Create one customer exit "Formula" variable called Forecast indicator. This variable will be populated with a number of 1 to 12 for each record in your cube based on the user entered month. i.e. if user enters October. assume your cube has 12 records one for each month the first 10 records will be populated with 0 and the records for Nov and Dec will be populated with a 1.
- Create a calculated key figure that is defined as (Actual Amount)Actual indicator + (Forecast Amount)Forecast Indicator.
- Create twelve restricted key figures with the CKF created in the previous step restricted with the month (Jan to Dec)
- Add the above created twelve RKFs in the query.
Regards,

APO DP - use of key figure change mode 'Redisaggregate'

Similar Messages

Maybe you are looking for