APO Integration model error

Hi all
when activating Integration model in R/3 with APO below error is coming
"Outbound queue blocked"
System:APOCLNT800,USER DDIC 09.02.2008 13:28:15
Function:/SAPAPO/CIF_LOC_INBOUND
Text:Host name: "XXXXXX"unknown/CPI-C error CM_Product.
when we click QRFC monitor lot of queues are there..
can any boby give solution for this
Regards,
srihari

Hi Somanath
Our basis consultant checked every thing in SM59 and he told every thing is ok.
In QRFC monitor lot of queues are there how to handle/delete the queues .. i tried but not able to resolve.
Regards,
srihari

Similar Messages

SAP eWM: Integration Model error during transaction CFM2

Hi,
I am new in eWM and i am trying to transfer the material master, plant, shipping point, vendor and customer from SAP ECC 6.0 to eWM 5.0.
I am getting this message:
Inbound Queue is Blocked
Queue for Current initial Data transfer is deregistered
Target System : SCDCLT100 (My eWM system)
Can someone help me to fix this problem so i can move on?
I will realy appreciated
Thanks & Regards
Bouba

Hi Sharad,
Thank you very much for your reply.
I was able to execute SMQ2 in eWM but i was not able to understsnd why the the product, vendor, customer,.. are not yet created in eWM.
The status is Ready and when i executed, i got a system fail status.
When i double click on the line i got this message:
Business partner 0000000511: no arrangement(enclosure,appendix) with this. 0000000511 is the vendor i created in ECC 6 and i also link my plant to this vendor.
Can you help me again to understsnd the root of the problem?
Thanks & Regards
Aboubakar

Error activating integration model in APO

Hi,
I would like to have a solution to the folowing problem.
I've tried to activate integration models in ECC with transaction CFM2.
I've build several integration models for class, customer, masterdata and transaction data.
When I try to activate one of these integration models the system gives the next error message:
outbound queue blocked
Function/Q/SAPAPO/CIF_CBASE_INB
Text:        Reference product has not been classified
I would like to know what causes the problem and how to solve this problem.
I hope to receive an answer soon.
Thanks for the help!
kind regards,
Marco

Hi,
A program enhancement allows you to exclude the relationship between a product and a reference material from the transfer.
The prerequisite for this solution is that this "reference material for materials that can be packaged in the same way" is not required in SCM and is not relevant for the transfer.
Procedure:
Start transaction SMOD. Display the components of enhancement CIFMAT01. On the following screen, double-click function module EXIT_SAPLCMAT_001 (user exit '001' of function group 'CMAT', program SAPLCMAT). In the program editor that appears, double-click include ZXCIFU01. You may have to create the inlcude again if necessary. Implement the system response you want in this include (follow the sample coding given below).
Example:
DATA: LS_MATKEYX TYPE CIF_MATKYX.
LOOP AT CT_CIF_MATKEYX INTO LS_MATKEYX.
if link_to_RMATP_needed = 'X'.
    continue.
endif.
   clear LS_MATKEYX-EXTRMATP.
   MODIFY CT_CIF_MATKEYX FROM LS_MATKEYX.
ENDLOOP.
Regards
Vinod

Transfer of material from R/3 to APO, Problem in Integration model

Hi
I have created Integration model for Transferring material from R/3 to APO.
While activating the model, it is giving error with status as i..e. SYSFAIL
On clicking the status, I am getting the following message
"Logical system R3CON does not assigned to Business System Group"
?Where to locate the BSG in R/3 and assign before transferring matl to APO
i require the steps&help to solve the problem.
Thanks in advance to all members for the help.
Srikanth

Dear Srikant ,
Pls check you have followed the below steps in the same sequence for R3 and APO
CIF Settings in R/3
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Assign target system and queue type CFC1
Maintain the SAP APO release NDV2
Activate BTEs for SAP APO integration BF11
User parameters for CIF CFC2
CIF Settings in APO
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Set up business system group
Create BSG /SAPAPO/C1
Assign logical systems to BSG /SAPAPO/C2
Maintain distribution definitions /SAPAPO/CP1
User parameters for CIF /SAPAPO/C4
You have got stuck up somewhere in R3 setting , which I have marked in italic font i.e.Assign target system and queue type CFC1
I hope this will solve your problem .
Thanks ,
Digambar

Purchase Order Integration Model Activation Error "Source Invalid"

Hi Experts,
When I try to activate Purchase Order CIF integration model for a specific plant, I am getting an error
"SOURCE_INVALID" r XC 014
When I checked failed LUW, found one product which is Subcontracted.
These a Subcon PO exist at this plant and Vendor is Subcon Vendor.
Before IM activation, I have CIFed Subcon vendor and T-lane between Vendor to plant exists in APO.
Any idea how can I resolve this issue?
Thanks,
Vipul

Hi Vipul,
I hope you have created subcontracting purchasing info record and connected with the productuon version.
Secondly whether it is valid.
A purchasing info record of the category subcontracting which documents the subcontractor as the source of supply of the end product.
Regards
Datta

Staring integration model after activation throws an error

Hello Experts,
I am trying to import Sales Orders from SAP ERP to APO. The integration model is done and the master data like Products and Location are transfeered to APO.
But when I try to transfer the Sales Orders I get an error saying:
Outbound Queue Blocked.
Function/Q/SAPAPO/CIF_ECM_INBOUND
Text: Processing of change number 500000000007 cancelled
Then the dialog box gives the options to goto the: qRFC Monitor, Ignore or Cancel.
The qRFC monitor records theame error.
Kindly let me know how I can solve this and transfer theSales Orders to APO.
Thanks,
Dilip

Dear Tibor,
Thank you for you reply. I will check the authorizations.
After this error I canceled it and went ahead. Then it gave me another error saying Product <> not found.
After getting beyond this error too it gave me about 260 successful messages in the logs. But when I execute the BAPI BAPI_SLSRVAPS_GETLIST2 OR go to the table /SAPAPO/ORDKEY in APO I cant find any Orders.
Can you kindly guide me as to where I am going wrong?
Best Regards,
Dilip

Activtion of PPM Integration Model does not send any data to APO

Hi all,
When I activate my PPM Integration Model, the activation finishs without any error, but no data is being tranfered to APO.
I do not get any error message to start looking for the problem.
Thanks and regards,
LHM

Hi Luiz,
"no data is being transfered to APO" Which data are you looking for?? I am assuming youa re expecting a PPM to be created in APO.
If so,
1. Do you see any PPm in /sapapo/scc03?
2. Check if the pre reqs. for creating PPM as in [Integration of Production Process Models|http://help.sap.com/saphelp_scm50/helpdata/en/8e/d4ef37e9a4ba6ee10000009b38f842/frameset.htm] are satisfied.
3. make sure to check the inbound APO queue or outbound R/3 queue depending on what you are using.
4. Also not the time of activation and check CFG1 in R/3 to see if you can get any clues.

CIF - Integration model name and APO application

Hi Experts,
In the CFM1 Transaction, there are 3 mandatory inputs are Model name, Logical system and APO application.
Logical systems are customized in CFC1 transaction. I couldn't trace the model name and application creation.
What is the transaction to customize/Create the new Model name and APO application.
Hope this is very simple question to you and expect your soon.
Thanks,
Saravanan V

Hi Somnath,
Thanks for ur reply.
First I saved the selection as variant. But it was not updated in the IM table.
Then I tried to generate the model and now I can see the details when I use the F4 help.
So, to create a integration model need to generate the variant once.
Thanks for the confirmation.
Thanks,
Saravanan V

Can I work backward from APO CIF function module to ECC Integration Model

On our APO box, I have activated the "new-style" BAdI which is called by the CIF function module /SAPAPO/CIF_TLANE_INBOUND:
CALL BADI lr_ref_cif_enhance->inbound_tlane
How can I find out what the business analysts have to do in their ECC Integration Model
to make sure that the CIF_TLANE_INBOUND function module is called when the Integration Model is activated (so that the BAdI will also fire)?.
Our current Integration Model does fire the BAdI /SAPAPO/IF_EX_TR_TRANSFER , but not the "enhance inbound tlane" BAdI called by CIF_TLANE_INBOUND.
So ...to restate the question:
How do I figure out what I have to tell the business analysts to do in their Integration Model to make sure that CIF_TLANE_INBOUND is called when the model is actrivated ???

Hi David,
I was away in a long meeting and just came back. A quick check in another R/3 (Enterprise) system showed the following:
There is no FM in the R/3 Enterprise box as CIF_TLANE_SEND and in APO (SCM4.1)
/SAPAPO/CIF_TLANE_INBOUND. This is not surprising esp when I check the other system versions based on which I did the initial research. It was ECC 6.0 with Enterprise Extension DFPS switched on (checked SWF5) and the APO system SCM 5.0.
Lucky me I checked the internal Sandbox systems instead of my client systems otherwise I would have posted there is no FM CIF_TLANE_SEND
Forget the SD Scheduling Agreement object I mentioned in the previous reply. That master data object will not trigger FM CIF_TLANE_SEND. I found the correct FM for it CIF_SDLS_SEND on R/3 side and /SAPAPO/CIF_TPSCO_INBOUND on the APO side.
So you have to necessarily use the BADI or User Exit enhancements for TPSRC and NOT TLANE.
In any case if its a Contract or Scheduling Agreement or Purchasing Inforecord master in R/3 (or ECC any version) then TPSRC is the FM used to create External Procurement Relationships (txn /SAPAPO/PWBSRC1) in APO during CIF transfer. Also a corresponding Transportation Lane (txn /SAPAPO/SCC_TL1) gets created when the Procurement Relationship is added in APO. Otherwise you can always manually create a transportation lane in APO which is an important master data for External Procurement Order / Requisition creation in APO.
Hope this helps. I am logging off for today - so no more further digging. But thanks to you I discovered another small "blackbox" of SAP. Will blog on this some time later - till then you can take a look at the [CIF Wiki|https://wiki.sdn.sap.com/wiki/display/SCM/CIF] page.
Best regards,
Somnath

Regarding Integration Model to CIF from ECC to APO

Hi ,
Please assist me in the following issues:
What will the impact if any material is ciffed twice or multiple times from ECC to APO through IM ...will it generate inconsistency ? if so, how we can avoid this ?
While I'm ciffing the material from ECC to APO through IM, the ' Find Master Data Object ' is showing certain number say 'X' but when I'm running CTM for it the explosion of BOM of Master Data is showing less number of material than 'X'...in that case what might be the possible issue ?
While generating IM , can I club Sale Order, Sale Order Stock, Planned Order, Prodn order under same variant ? or ill it generate inconsistency ?
TIA
-Michael

Hi Michael,
1. It is not a problem. Is is quite common to CIF materials twice a days or even more. It shoul not generate inconsistencies.
2. You could have more materials than materials bith BOM. In other words, maybe not all your materials have a BOM.
3. Its recommended to have a separate integration model for your object.
Read this document with the Best Practices:
https://websmp102.sap-ag.de/~sapidb/011000358700000715082008E
Also, note that I was mentioned by Dog Boy, it is convinient asking single questions in your threads. This way you will find more responses.
Kind Regards,
Mariano

Integration Model for the resources terminates with an error

Hi
we have deleted the existing Integration model for the Resources and trying to create a newones, when iam activating the new resource integration model it is terminating with an error "Resource already exists(mapping error occured)".
we did the consistency check for the resources and ran OM17 everything seems OK. when tried to the same in the test system it works fine...
How to rectify this..

5,
Deleting integration models for master data is a poor way to start any process.
The message implies that the offending resource probably was created locally in SCM, or perhaps to support a different Business System Group. The easiest solution is to delete the resource and then recreate via Core Interface.
Best Regards,
DB49

Integration Model - Resource Transfer to APO

Hi,
When i transfer a resource from R/3 to APO the data is transferred to APO but not to the active version.
Instead it sits in APO as model independent version i.e without a version number.
Please let me know how this happens and how to overcome this ? I want the data to be available in version 000
BVN**

Hi Valavan,
I assume your issue is related to only the changes made to R/3 Resources and not for new Resources.
There is a customizing setting in R/3 to control this. Use trns. CFC9 and set the value 'N' for the 'Change Transf. Mode field. This will ensure any changes to Resource in R/3 will also be released to 000 version in APO. If the value is 'X' the changes are released only to model independent version.
Regards,
Srinidhi

Integration model activation issue - After Prod to Quality refresh of R/3

Hi Guys,
Our R/3 quality system refreshed from production. Hence all the integration models Logical system pointing APO production system. Mistakenly I deactivated all the integration model in R/3 Q system which having APO Production logical system.
All the IM in R/3 quality system are inactive. When try send material getting error message "relavent location doesn't exist".
For that try to move the Location getting error message "Location already exist in APO Quality" system.
Now I want to active the all the Plant, material.etc integration models. Please let me know if any more information and help to overcome the issue.
Thanks,
Saravanan V

Saravanan
Make a table level change and set the integration model flag as active in the table CIF_IMOD. This will help you solve the issue .
Go to transaction SE16 . Give table name as CIF_IMOD. Give the name of you integration model and execute . Now all versions of that integration model will be displayed ( this will happen if you have many inactive versions and do not have the RIMODDEL program to delete inactive IM's) . Choose the latest version and go to change mode and set the value of "Entry is active" (technical name ACTIVE) field to I.
You can take help from development team if you do not have authorization to SE16
Thanks
Saradha

Integration model for sales orders failing repeatedly

Integration model for Sales Orders to APO is failing and in the CIF the error says "Customer requirement G BR 0082372353 900010 0000: liveCache problem, retu".
This error appears everytime you we run the integration model and it says in the Job log; ABAP/4 Processor: SYSTEM_CANCELED.
Note that this is "not" manually stopped but it still gives this error.

Hi Kailash,
Run /SAPAPO/SDRQCR21 in apo for the part contained in your delivery document, which is failing. While running the report, check the radiobutton, Build the requirements from Doc.Flow table. This will remove the inconsistencies remaining in the requirement table on R/3 side.
Try this and let us know, if you could succeed.
Regards
Sanjeev

CFM2 Activate the Integration Model

Hi Gurus,
I have created the integration model using CFM1 and when I try to activate the Integration Model in CFM2 I get an error "OUTBOUND QUEUE BLOCKED".
SYSTEM: PAPCLNT400
FUNCTION: /SAPAPO/CIF_PROD_INBOUND
TEXT: THE ABAP/4 OPEN SQL ARRAY INSERT RESULTS IN DUPLICATE
I am getting this error in Production, but when I try it in QA System it works fine.
I am unable to figure out the issue.Please help me with the solution.
Thanks,
Deepthi

Hi Deepthi,
Try these steps for analysing the error.
Run transaction CFM2 and you will come across the same error (THE ABAP/4 OPEN SQL ARRAY INSERT RESULTS IN DUPLICATE).
2) Go to APO and run transaction /SAPAPO/C3.
3) In TIME RESTRICTION Section on the screen enter tentative time the error must have occured (This step is more from getting nearest log that has been written)
4) In the LOG CLASS select "Only Important Logs" and then execute (F8).
The log will get generated and will provide you some input for your analysis.
Hope this helps you.
ASHUTOSH

APO Integration model error

Similar Messages

Maybe you are looking for