APO - MALORE datasource
Hi
Can someone explain the logic in relation to extracting data from APO datasource 9AMALORE.
I really need an explanation on how this extractor works. The problem is related to "Labour resources" and "Machine resources"
When check a material in APO planning book for resources I can see data on both resources:
Example: Key figure (standard 9AFPROD)
In APO for cal/month: 11.2010
Labour resource 16.000
Machine resource 16.000
However In the BW report:
Labour resource 16.000
No data exists on the Machine resource
Looks right when checking the extractor in APO, However only Labour resource contains data = 16.000. Machine resource = 0.
Can anyone explain.
Br
Thomas
Hi Thomas,
I notice this post is now several years old but did you obtain an offline answer to your question? I have observed something similar and I am also looking for details of how his extractor works for a quantity related key figure.
Many thanks,
Daniel.
Similar Messages
-
APO- BI Datasource from Planning Area
Hi All,
I need help with APO-BI datasource generated from Planning Area.
In the Dev environment we had two clients:
DCLNT020 (Holds APO part) DCLNT010 (Holds BI workbench).
So a datasource was generated from the Planning area in DCLNT020 --> it was replicated in DCLNT010 --> data from Planning Area was extracted to BI cube using this.
Now we transported this datasource to the Test environment which has only one client (TCLNT010). I maintained the Source to target mapping there such that DCLNT020 -- TCLNT010 and DCLNT010 -- TCLNT010.
However the Transport fails and the error message is:
Cannot replicate DataSource
Errors occurred during post-handling RS_AFTER_IMPORT for ISFS L
If I go to the Test system and try to generate the transported Datasource directly from the Planning area again, it says this DataSource already exists. However I cannot see this datasource in the system even after replicating and refreshing multiple times.
Please provide your inputs as to what might be wrong and hat I need to do to solve this.
TIA
AmritaHi Amrita Goswami
Based on the above post it seems to be your maintain two clients in Dev one is for creation and another is for testing and when it comes to test environment your maintain only one client and maintain the DS in one it wont give any impact..
Based on the error
> +Cannot replicate DataSource+
> +Errors occurred during post-handling RS_AFTER_IMPORT for ISFS L+
There could be two reasons
1) Needs to replicate the data source once you have imported it to test environ ment and than ran the program "RSDS_DATASOURCE_ACTIVATE_ALL" by giving the name of the source and DS name if its BI 7.0
If its 3.x then have to execute the program :"RS_TRANSTRU_ACTIVATE_ALL" By specifying the transfer structure name.
2) RS_AFTER_IMPORT in some cases its because of improper transport of the update rules.
Solution would be recollect the transport and release the DS transport first and execute the ( 1)Activities and then transport the remaining._
Hope its clear a little..!
Thanks
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****
>
Amrita Goswami wrote:
> Hi All,
> I need help with APO-BI datasource generated from Planning Area.
>
> In the Dev environment we had two clients:
>
> DCLNT020 (Holds APO part) DCLNT010 (Holds BI workbench).
>
> So a datasource was generated from the Planning area in DCLNT020 --> it was replicated in DCLNT010 --> data from Planning Area was extracted to BI cube using this.
>
> Now we transported this datasource to the Test environment which has only one client (TCLNT010). I maintained the Source to target mapping there such that DCLNT020 -- TCLNT010 and DCLNT010 -- TCLNT010.
>
> However the Transport fails and the error message is:
> Cannot replicate DataSource
> Errors occurred during post-handling RS_AFTER_IMPORT for ISFS L
>
> If I go to the Test system and try to generate the transported Datasource directly from the Planning area again, it says this DataSource already exists. However I cannot see this datasource in the system even after replicating and refreshing multiple times.
>
> Please provide your inputs as to what might be wrong and hat I need to do to solve this.
>
> TIA
> Amrita
Edited by: K M R on Feb 6, 2009 12:03 PM
Edited by: K M R on Feb 6, 2009 12:18 PM -
BW - APO Datamart datasource migration issue
Hi,
Question : Can we migrate datasources exported as datamart from APO-DP system into BW, from 3.x to 7.0 or does it have to be a 3.x datasource with transfer rules, TS , update rules etc ...
1) I know we cannot migrate data marts with 8* or //8 but this datamart is replicated from our APO-DP system and begins with 9*.
Thanks .
HSHi Geetanjali,
Thanks for the reply.
My problem is that I am getting error message "No transfer structure available for infosource 9* in source system" when I run the infopkg to load in PSA ( which is default for 7.0 datasources).
This is the dataflow l I wanted to have which replaces old model as shown :
NEW 7.0 dataflow : Datasource -->infopkg --> psa --> dtp -->transformation --> cubes ( same source feeds 3 cubes ) .
OLD 3.x dataflow : DS >Infosource>Transfer rules--> infopkg --> update rules --> cubes.
Thanks .
HS -
We have a requirement to enable delta for a pdatasource which is based on a planning area, it seems SAP is inactivated this functionality for these kind of datasources...
Did anyone tried to enable delta for planning area based datasource ? if so can you please share your experience.
Thanks,
RamanWe are having full load..as SAP said delta will take more time than full...
MIght be in latest versions they have upgraded delta functionality..Check OSS notes/help.. -
How to extract data from APO to BW(not APO's BW)
Hi, expert.
Now I want to extract data from APO to BW (not APO's), what's the data flow.
1. APO datasource----->BW (not APO's) datasource----->BW (not APO's) infocoube
2.APO datasource----
>BW (APO's) -
>BW (not APO's)
I want to create query on the BW not APO's.
Which one is right? or there is another way?
Thanks in advance.Hi Bruce,
If I understand your question correctly your scenario 1 comes closest to a solution:
1) Create/activate Datasource in APO system and test it using tcode RSA3 (assuming it is SAP APO)
2) Replicate the Datasource in BW + create infopackage which will load the data into PSA
3) Create a DSO (if you like a layered approach) and a Cube on top + a Multiprovider above
4) Connect BW Datasource to DSO and DSO to cube (Transformations + DTPs to load)
5) Create a query on the Multiprovider
Hope this helps.
Grtx
Marco -
Creation of a web service datasource in APO BW
I am using APO V5, which includes BW V7.
I need to create a 'web service' datasource in APO BW, so that I can receive XML data from XI to update the datasource.
How can I create the 'web service' datasource?... should the 'logical system' be the connected XI system?
Thanks,
Bob AustinYou will require to create source System for Web Service Folder - Where you will require to maintain Logical System Name, Source System Name, Type and Release
-
How to include 0STOCK_VAL in a Query based on APO DataSource?
Hi All,
I have a requirement to include *0STOCK_VAL" from Inventory to the APO InfoCube. But the problem with this is, this particular KeyFigure is not present in the APO hence it cannot be included in the APO DataSource i.e. we cannot get this from the Source System.
I checked the Production system, 0STOCK_VAL InfoObject is avaiable in one of the InfoCube but it is not present in any DSO's. Since it is not present in any of the DSO's we cannot write a Routine to read it from any of the table.
I even thought of including the InfoCube where 0STOCK_VAL is present into a MultiProvider along with the APO InfoCube. I can define the joining condition based on Plant and Material. But if I drill down any other characteristics which are not common in both the InfoCube then we will have a blank line in the Query which is not recommended.
But this KeyFigure is very much needed in the Query.
My question is how to include this in the APO InfoCube or How to get this in the Query with values??
Can anybody please help me on this.
Thanks in advance.
Prasapbihi Matt,
In your example like a transaction was paid for with a payment type of PTAM, then you need all the transaction details. I suppose that all the required transaction details along with payment type PTAM will be loaded into an infoprovider and you run a report on top of this infoprovider. Then for that report you need to have a selection screen variable for Payment Type and if the user enters the payment type PTAM, then he can get all the other transaction details from the infoprovider.
Let me know if i don't understand the requirement correctly.
Hope it helps.... -
Datasource on APO Planning Area - Transportation Error
Hi All,
I have created the Datasource on APO Planning Area. Datasource working fine check in RSA3 and also in BW side. when transporting the data source from APO Dev to APO QA i am getting following error and transport fails. Please suggest.
Thanks
Christopher
Execution of programs after import (XPRA)
Transport request : AD1K909333
System : AQ3
tp path : tp
Version and release: 372.04.10 700
Post-import methods for change/transport request: AD1K909333
on the application server: hllsap112
Post-import method RSA2_DSOURCE_AFTER_IMPORT started for OSOA L, date and time: 20080725125524
Execution of "applications after import" method for DataSource '9ADS_PP_APO'
Import paramter of AI method: 'I_DSOURCE:' = '9ADS_PP_APO'
Import paramter of AI method: 'I_OBJVERS:' = 'A'
Import paramter of AI method: 'I_CLNT:' = ' '
Import paramter of AI method: 'LV_CLNT:' = '100'
DataSource '9ADS_PP_APO': No valid entry in table /SAPAPO/TSAREAEX
Planning area for DataSource '9ADS_PP_APO' does not exist in target system
Extract structure /1APO/EXT_STRU100002737 is not active
The extract structure /1APO/EXT_STRU100002737 of the DataSource 9ADS_PP_APO is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
RSA2_DSOURCE_AFTER_IMPORT belongs to package RSUM
The errors affect the following components:
BC-BW (BW Service API)
Post-import method RSA2_DSOURCE_AFTER_IMPORT completed for OSOA L, date and time: 20080725125532
Post-import methods of change/transport request AD1K909333 completed
Start of subsequent processing ... 20080725125524
End of subsequent processing... 20080725125532
Execute reports for change/transport request: AD1K909333
Reports for change/transport request AD1K909333 have been executed
Start of................ 20080725125532
End of.................. 20080725125532
Execution of programs after import (XPRA)
End date and time : 20080725125532 Ended with return code: ===> 8 <===Christopher,
There seems to be no extract strucutre available for this data source in quality. This is creating the problem in quality. The extract strucutre which is created in your scenario would be available in temp folder and that will not be availbale for transport, so you need to have the datasource generated in quality and then you transport the active version to quality so that it will be available with the changes as that of development.
Regards
Vijay -
Infoset as Datasource in APO for BW
Hello Gurus,
Need some help in creating infoset in APO and used it in BW as Datasouce,
I have created a Infoset in APO using T code SQ02.added 4 tables and the genrate.
After that i have replectated in BW source system but this datasource in not reflected in BW.
Can you pleas guide me what i have done is correct or some addictional steps need to be done.
and also some one can send me some documents on infoset in APO or ERP tha would be great help.
Thank in Advance
Regards.Have you created a generic datasource on the infoset you created?
In Generic datasource creation(RSO2) in 'Extraction from Query' option you can give the infoset name and create a generic datasource. This datasource can be replicated into BW by selecting replicate in Sourcesystem.
Regards -
Any APO Vehicle Scheduling DataSources in BI Content?
Hello all.
I need to get data form APO Vehicle Scheduling
into BW. I can't find in BI Content help any content
objects suitable. Are there any?
If there is no, what views/tables should I use for
generic DataSources?
Thanks,
TimofeiHema,
Usually the Asserttion_FAILED dump is due to PSA - delete the data in the PSA Tables - Ideally using SE14 and deleting / dropping the data in the tables and then check the same.
Warm regards,
Arun Varadarajan -
APO/BW: Creating datasource in BW for APO
Hi
1. In creating a datasource (in BW) to be used in APO by righting on the cube in question and selected the option Generate export Data Source. It created a datasource 8CubeName, which
could be found under the InfoSource tree in BW. At this point, will APO see 8CubeName?
2. Where in BW do we specify that it should go to APO? What if there are other systems which can also use this same datasource and how do we specify which one?
3. I also understand that update rules can be created on APO side, if so, what becomes of the updated rule created on the BW end? In other words, if update rules are applied on the APO side, and also applied on the cube on BW side, what happens?
4. Ok, so if I understand it right, this process creates a structure for datasource in BW, which is seen on APO DP. But which process actually pushes data from BW to APO DP?
ThanksHi Amanda,
I believe most of your questions will be answered by understanding that inside APO/SCM itself there is BW system, that works just like the BW that you had worked and understand well, mostly the data staging from BW to and from APO are like interaction between 2 BW (datamart), now try RSA1 in your APO system
1. Yes, APO will see the datasource after you replicated in APO from BW as source system; in APO we create source system with RSA1 like in BW, transfer application component (RSA9), this datasource will be displayed under 'Datamart'.
2. It just like BW act source system for other BW system, we have no need to specify in BW which one to go, but in APO we will use this datasource to assign to infosource in APO
3. Again in APO it just like a 'mini' BW there, so update rules in APO are indepedent used for APO-BW, nothing will happen to existing BW
4. Create infosource in APO and assign datasource from BW, create infopackage.
You can use process chain as well, yet in APO we have more process type (specific for APO usage like generate CVC, adjust time series, etc)
http://help.sap.com/saphelp_scm50/helpdata/en/8a/9d6937089c2556e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm
hope this helps. -
Datasource activation problem in SCM APO 5.1
Dear friends,
I am working in APO5.1 and creating a cube with using datasource from BW side (8ODS_EPDTL).
1. Source system --> replicate Datasources (in BW 3.X) (My client requirement.)
While activate datasouce, it saying need to create Transfer rules..if i create it also data source is not activating..
if i don't wont to create TR then it now coming to change mode.
If i create TR rules at datasource it will be come infosource system na,,,, i can't assign to my APO Communication structure.
so want have to do..and how i can activate my Datasource(8ODS_EPDTL)
Please help me..
Regards
Srinivasaraosolved
-
Hello, Does anyone know how to create a datasource in APO system? I assume it is different than creating one in R/3.
Thanks,Hi.....
APO - BW Adhoc Reporting
Steps to be performed in APO client.
(Prerequisite: existing sales cube)
Create Export Datasource for Planning Area :
SAP Easy Access Menu => DP => Environment => Current Settings
=> Administration of Demand Planning and Supply Network Planning
Specify which fields you wish to be selectable later for reporting purposes.
Don´t forget the field ?Version" (/BI0/9AVERSION)
Replicate Metadata
Create Infosource
Assign Source system and data source
Maintain transfer structure and communication structure
Create Remote Cube
Assign Source system
Create Multicube (based on sales cube and remote cube)
Create your reports with BEX according to the your requirements.
In case of APO we use Export datasource.....
Export datasource is used when you want to use BW system as a source system. If you want to send data from one datatarget to other data target within BW system then we go for export data source. right click on the target and say export data source and then go to source system tab
right click on Myselof source system and say replicate data source..then you will find datasource with prefix 8.
http://help.sap.com/saphelp_nw04/helpdata/en/86/cade377806e664e10000009b38f842/frameset.htm
Also check this :APO BW Integration
Hope this helps.....
Regards,
Debjani......
Edited by: Debjani Mukherjee on Oct 20, 2008 2:54 AM
Edited by: Debjani Mukherjee on Oct 20, 2008 3:00 AM -
Hi Gurus,
have you some experiences with APO extractors? In particular 0APO_PPDS_ORDER_01 and 0APO_PPDS_RESCAPREQ_01.
For about 30.000 records, the esecution duration is about 1 hour.
Have you some ideas?
Thanks in advence.
Regards.Hi Vito,
Kindly have a look at below note,
1476892 - Performance tuning for 0APO_PPDS_ORDER_01 extractor
Hope this helps.
Regards,
Mani -
To load data from a cube in SCM(APO) system to a cube in BI system.
Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
MeeraHi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy
Maybe you are looking for
-
So I have been a longtime Adobe customer. I have nearly every version of the creative suites, with all the bells and whistles and have spent thousands and thousands of dollars on these products for our business as well as personal use. SO.....we just
-
ITunes updated and no longer syncs with iPod Touch 4th gen
On January 26, 2014, I updated my iTunes software. After doing so, my iPod Touch 4th gen no longer syncs with or is recognized by iTunes. Reinstalling iTunes has not worked. I suspect that this is a problem created by the iTunes update.
-
I am unable to sync my ipad..i get error message " required file cannot be found" Can you help me?
-
End-to-End user authentication with XI
Dear community, we sit in a situation where the customer wants to have an end-to-end-authentication throughout an integration process. The setup is as follows: a dialog-user in a legacy system uses an application that triggers an integration process
-
CUP 5.3 (SP9) Role search in a CUP request
Dear Experts, I have a problem. I cannot select roles by company selection in a CUP request. I believe I am not associating companies to roles correctly...I don't know what went wrong and what additional procedures that I have to follow to fix this p