APO orders with error status 171 in SAPAPO/CCR

Hi,
We are creating orders in APO which are CIFed over to ECC. They get a number in R3 but are not fed back to APO. We reconcile using CCR where we get the error 171, which says that orders in ECC have storage location, and the ones in APO dont have them.
Any ideas what we are doing wrong.
Regards,
Zeeshan.

Hi,
As Christian said if you have an empty source of supply in the apo order you might get this error. The other possible reason is that the S.Loc field in the SNP PPM for the O/P Product is blank. Kindly populate the value fo S.Loc in SNP PPM and create some orders and you won't see them in Delta. We have faced this faced and then corrected them.
Regards,
Senthil

Similar Messages

Work item with error status

Hi,
I need your help in order to know what shall I do when a work item finishes with error status.
Thanks in advance,
Andrea

look at business workflow -> development -> administration -> workflow runtime .
here you have several possibilities
SWPR to restart after error
SWI2_DIAG for diagnostics
SWI2_FREQ to see the details
SWWERRE_DEBUG to debug

Creating a planned order with error "Material requires configuration"

Dear All,
I am facing a problem for creation of a planned order with error "Material requires configuration".
To follow the note 180317, I change Account Assignment Category to "U" (Unknown).
However, the system still does display the same error.
Could you please help provide possible solution for this?
Regards,
Phong

See also the following blog post:
Configurable planned order for material variants: Exception "53: No BOM explosion due to missing configuration"
BR
Caetano

Any report or Table to see the list of orders with errors in SAP CRM?

Hello All,
Can anyone help me in getting a table or report to find the list of orders with errors in SAP CRM?.
Let me know if you need any additional information.Thanks in advance.
Cheers
Sreedhar
Edited by: sreedharhazari2 on May 26, 2010 11:59 AM

Hello Chait,
I got the solution by this report CRM_ORDER_CHECK_STATUS.
Anyhow thanks very much for your inputs.
Cheers
Sreedhar
Edited by: sreedharhazari2 on May 30, 2010 8:48 AM

Idocs with error status

Hi Everyone,
How to find all idocs with error status for a given date range?

Hi,
Please refer EDIDS for Status and EDIDC for control records.
Also refer the below wiki page for details.
http://wiki.scn.sap.com/wiki/display/ABAPConn/IDoc+Overview
Thanks,
Karthik

Some times Child Job with error status

Hi,
We are running some standard report periodically, this report is generationg some child jobs.
Problems is that these child jobs, somtimes are failed with error status.
This is happening very few times,may be 2 or thrice a month.
There's no explanation on this.
I am running with 4.6c version and my Basis is 620.
Can you please add some valuable suggestion for this.
Thanks,
Anmol.

What is your question? How to stop the spawned job or how to stop the errors? What program? What is the error or the condition that triggers the error? You have to give more information and be clear about the desired result...

ApplicationDidReceiveMemoryWarning and exit with "error status 101"

My application crashed with memory error. It doesn't show any memory leak, but handles a large database and it looks like, its cache causes this problem.
I fixed it by closing database and reopen it inside "applicationDidReceiveMemoryWarning".
It works great on the first call to applicationDidReceiveMemoryWarning (actually significantly dropping the memory usage). But the function is never called again, and my application eventually crashes after a few minutes of heavy usage with "error status 101" .
My understanding is that "error status 101" happens when app doesn't release memory properly on didReceiveMemoryWarning, but in my case, it just crashes without giving me a chance to clean up.
Any idea on what's going on here?

Yes, actually, the other answer you got was wrong.
Just throw an error inside the script, probably (given what you want to do) at the end. For example:
osascript -e 'error "This is a test." number 9000'
on the command line will give (on the command line) something like:
6:22: execution error: This is a test (-128)
If you read the man page for osascript, you will see that by default script errors are written to stderr; if you have your shell script watch stderr between the start of the script and the end of it, you'll catch the result message.
A few things to keep in mind:
--> AppleScript can catch its own errors using a "try" block, similar to in other languages. The basic syntax is:
try
(* Do some stuff here *)
on error msg number num
(* Process the error here *)
end try
--> If you throw an error yourself, try to use an error number which is "safe". Most of the negative numbers are already in use as standard signals. For example, -128 is "User canceled", while -43 is "file not found" (which pops up if you cast a string to an alias and the string does not describe a path to a valid item in the filesystem -- that's actually a very simple way to test for file existence). If you use numbers starting with 9000, which seems to be the consensus starting point, then you have the additional advantage of being able to figure out where things went wrong.

Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

Hi,
process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**

Hi Neha,
When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**"
I have come to know that there is one ABAP programe when we go to manage varient.
ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

Order with CLSD status selected

Hey All
I am not sure if this is question in CO but While calculating variances the orders with status as CLSD are also being selected. The system in the output shows the orders with CLSD status which is causing long runtime issues. I am sure that orders with status as CLSD are excluded from processing . Can anyone help me on this
Thanks
Ankur

Hi ,
You need to regulary set the deletion flag in the closed process orders . Please refer Note 397110 - Performance: Archiving manufacturing orders.
Also refer Note : 393686 on other performance related issues in Cost Object Controlling..
Regards
Sarada

Purchase Order with "Error in Process" status????

We are currently using SRM 4.0 in an extended classis setup. We have been live for appropriately 1 yr and half and I have noticed more and more Purchase Orders going into status "Error in Process" when a change (increase value, add line items, change name) has been performed on the PO and then the PO is approved. The PO will sometimes show up in the SRM Administration Tab occassionaly but more than less they don't and we have to search for failed PO to find all the "error in Process" PO's. I have had success with having the user just change something in the name of the PO and then re-order and the PO will then go into R3 but I was wondering is there something in the system other than having the user change the PO that I can do to push the PO into R3. When we have similar issues with confirmation I run tcode SWO1 and use the GUID ID and click transfer to push it to the backend. Is there anything I can do in the backend that will send the PO into R3 and update the status to Ordered giving there is no apparent error in the system?

Hello Robert,
We've been facing a similar issue (we are also in SRM 4.0 Extended Classic Scenario): Sometimes, when the user modifies a purchase order from SRM (for example, to add some new items), the purchase order replication to the backend failed.
In the Application monitor, we had the following backend error:
"Insert Cost Center for Item X"
but the Cost Center value was correct (other items from the same purchase order had the same account assignment).
We thought the problem was related to the function module in the backend which was changing the purchase order, so we put a SAP OSS Note.
In this OSS note, SAP recommended us to implement note 1005615, and the problem was solved.
Check if this note could be implemented in your backend.
Hope this helps you,
Regards.

Purchase order with HELD status

Hi,
After approval of shopping cart all my purchase order are created with held status.
When controlling the purchase order i have the error message "Select a location to which a plant has been assigned"
Could anyone please give some explanation.
Thanks

Hi
Hope it would not allow to order a cart since you don thave a plant details?
check it up. If Po created check why plant details are not copied into your PO.
regards
Muthu

MAIL XI FTP;mails are in XI with error status,need 2 transfer as local file

i m doing a scenario, where i need to pick a file from INBOX and need to place as a file in my sys.
well, it is picking up my mails, so far my mail box is empty.
now, when i checked my presentation server, i havent got the file.
and when i checked " Monitor for processed XML Message" in SXMB_MONI, i can see my messages with RED STATUS FLAG.
error category: mapping
error id: exception during execute
PLEASE come up with suggestions and solutions
now i have two issues,
1. i need to place that file in presentation server.
and to run this config successfully,
2. how to transfer those file from XI SERVER TO presentation
regards
shahid
Message was edited by:
        shahid mohammed syed
Message was edited by:
        shahid mohammed syed

Hi ,
         If you are reading row by row from the attachment of Mail or data .
       <b>   Did u specied the Interface and namespace in the Mail sender Adpater ?</b>
                    If u have specified then it will come as row by row in XML format. Then write your own XSLT maping or java mapping to convert it into required format !
         Once it transformed then only it will come for receiver determination .
      <b>   Check in the Communication channel monitoring does it contains any error or not ?</b>
Regards.,
V.Rangarajan

How to create Internal Order with LKD status

Hi All Experts ,
Can anybody tell me how can we create IO directly in LKD status ? Or it is manual acitivity by clicking on Set / Rest button and then check LKD and save. I tried in KOT2_OPA but not no any option found. If any experts can guide for the following configuration would be great.
1 ) Is it possible to create IO with LKD status directly ?
2 ) Where that configuration needs to be done ?
3 ) What is significance of JEST Table relating to Internal Order ?
Exprerts help would be great !
Regards,
Sharvari Joshi.

Hi Ajay,
It worked fine exactly. Thank you !
Can we have facility to create IO with LKD ststus in System Status ?
Is it true that there are only 4 SAP Standard system status CRTD, REL, CLSD, TECO.
Is it possible to add LKD in that ? When I clicked on to the up / down arrow I am getting only these four values.
Can we define additional values to this point ?
Regards,
Sharvari Joshi.

DIServer insert operations for sales orders with error

DIServer insert operations for sales orders with
That even though the insert is inserted DocDueDate DocDueDate it says error.
Subtracting the value of the format 'yyyy-mm-dd', 'yyyy/mm/dd', 'mm-dd-yyyy', 'mm/dd/yyyy' put all reporting
When the input is entered DocDueDate ShipDate also put together ... but I get an error.
The error message 'env: Receiver-10Enter due date [ORDR.DocDueDate] 171AddObject2EEE7D98-AB71-464A-93AB-933F0AD3D4DC'
Purchase order entered into the normal value because the xml is missing or wrong with you.
Please answer all the possibilities that can be resolved
This Xml used.
"<BOM>" +
"<BO>" +
"<AdmInfo>" +
"<Object>oOrders</Object>" +
"</AdmInfo>" +
"<QueryParams>" +
"<DocEntry />" +
"</QueryParams>" +
"<Documents>" +
        "<row>" +
        "<DocType>I</DocType>" +
        "<DocDate>2012-01-11</DocDate>" +
        "<DocDueDate>2012-01-11</DocDueDate>" +
        "<CardCode>CD00001</CardCode>" +
        "<Address>Anymode</Address>" +
        "<DocCurrency>KRW</DocCurrency>" +
        "<Comments>[sales orders] LGU TEST</Comments>" +
        "<TaxDate>2012-01-11</TaxDate>" +
        "<JournalMemo>JournalMemo</JournalMemo>" +
        "<Address2>Addr</Address2>" +
        "<BPL_IDAssignedToInvoice>1</BPL_IDAssignedToInvoice>" +
        "</row>" +
"</Documents>" +
"<Document_Lines>" +
        "<row>" +
        "<ItemCode>ACDT0100ET</ItemCode>" +
        "<Quantity>1</Quantity>" +
        "<Price>5000</Price>" +
        "<DiscountPercent>10</DiscountPercent>" +
        "<WarehouseCode>A100</WarehouseCode>" +
        "<VatGroup>A2</VatGroup>" +
        "</row>" +
"</Document_Lines>" +
"</BO>" +
"</BOM>";

I had the same error change the Date to the format yyyymmdd, and problem solved.

Submitting Customized Report Request, Completed with Error Status

Dear All ,
Good Day ,,
1- I am using Oracle Application 11.5.0
2- Application And Data Base Server Unix AI
3- created Oracle Report file (i testes all sql statmets using toad , successfly)
5- Tested the report , passed parameters , it is running successfully .
6- Cpied the reports to the next path (E:\oracle\testappl\per\11.5.0\reports\US)
7- Created Executable file (has the same name of the rdf file)
8- Created Concurrent program contains the same Executable file and the output format is 'PDF', Style = 'Landscape' , printer = 'noprint' , the added the parameters (the same named in the rdf file)
9- Added the Concurrent program to the HRMS 'Reports & Process'
10- From the HRMS Manager Responsibility , i submitted the request , passed the parameters .
11- Refresh , Pending , Runing , phase 'Completed' , Status 'Error'
12-View Log .. :
Human Resources: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
KU_PAYSLIB module: KU_PAYSLIB
Current system time is 31-MAR-2010 23:29:55
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
TIME_PERIOD_ID='442'
ORGANIZATION_ID='1424'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
stat_low = 84
stat_high = 0
emsg:was terminated by signal 4
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3192426.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 31-MAR-2010 23:29:56
12-When i change the output format to XML it completes with 'Normal Status' but , the next Log is appearing :
Human Resources: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
KU_PAYSLIB module: KU_PAYSLIB
Current system time is 31-MAR-2010 23:36:19
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
TIME_PERIOD_ID='442'
ORGANIZATION_ID='1424'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.28.0 - Production on Wed Mar 31 23:36:20 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 3192428
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 31-MAR-2010 23:36:21
Thanks A lot

>
emsg:was terminated by signal 4
>
For this issue , pl see the solutions in this related thread - Re: The Concurrent Manager and Programs is failing random
>
REP-3000: Internal error starting Oracle Toolkit.
>
This typically indicates that an X server is not running on the Unix server. Pl see these MOS Docs
200474.1 - Comprehensive REP-3000 Troubleshooting and Overview Guide
207532.1 - Troubleshooting Tips for REP-3000 Error when Running PDF/POSTSCRIPT/HTML Reports
Searching on this topic in these forums will also retrieve many hits.
HTH
Srini

APO orders with error status 171 in SAPAPO/CCR

Similar Messages

Maybe you are looking for