APO /SAPAPO/MAT1 Authorization with check based on SNP planner

Hello,
We want to maintain authorization profile enabling to have a filter on /SAPAPO/MAT1 based on the value of the SNP Planner.
Standard transaction PFCG does not brings back the SNP Planner as being a checked object when using /SAPAPO/MAT1 in the menu
So, I used transaction SU24 and changed the setting for /SAPAPO/MAT1 : I added the authorization object C_APO_PLNR SNP Planner with check indicator "Check" and proposal "YS" . The status is now green for this object but I do not have understood if I had also to maintain TSTCA column "status: check at transaction start". In any case, I did not found how to activate it.
With this setting, I also competed with PFCG the required value for SNP Planner.
Result: it does not work. Could some one help ?
Regards,
Christine

Hi Christine
Please check OSS Note 1464451 (Authorisations in APO Master Data). I dont think you can directly use SNP Planner as a basis for authorization without an enhancement.
RIshi Menon

Similar Messages

Authorization check based on item category on sales order (VA01 or VA02)

I want to be able to restrict authorization of users based on item category. We only want certain users to be able to select a certain item category. I know I'm going to have to check one of the userexits in MV45AFZZ. The issue I'm having is the authorization object .
The item category is field VBAP-PSTYV.
What we are going is having a item category for emergency orders. But this requires more manual steps to associate with the original order. We already have the emergency item categories defined and working (no credit check etc) so there's no reason not to have them added to the original order. The issue is its use has to be restricted so when the user selects an alternative item category it checks whether they have the authority.
Any help would be appreciated

Hi,
You can achieve this through authorization objects.
Transaction
SU20 - Authorization Fields
SU21 - Authorization Objects
Create the field PSTYV in the Authorization Fields.
Then Create the authorization object and include this field along with the standard field ACTVT (which determines what activities can be performed by a certain user i.e. Create, Change or Display) & user-name
In your your-exit, you can either use the ABAP command AUTHORITY-CHECK or the function-module AUTHORITY_CHECK and pass the values for these fields. The system can perform the test based on this values & based on the sy-subrc value you can restrict the users that are not having the authorization to select item-categories for emergency orders.
Following link should help you:
[SAP Authorization Concept|http://help.sap.com/saphelp_wp/helpdata/en/52/671285439b11d1896f0000e8322d00/content.htm]
Hope that helps you.
Regards,
Saurabh

Authorization check based on personnel sub area

Dear experts,
         I would like to know if there's a way to do the authorization checking based on personnel subarea? Currently we can perform the authorization check up to Personnel Area only in P_ORGIN.
          Please advice.
          Thanks in advance.
Regards,
Yen

The feature Administrator groups (PINCH) is designed to deal with such a situation.
Example
Administrator A is responsible for personnel areas 1 and 2, Administrator B is responsible for the employee subgroups X and Y within personnel area 3, Administrator C is responsible for all other employee subgroups within personnel area 3.

Setting up Abode Digital Editions, when I try to Authorize with my Abode id information I get the message "Activation Server Problem - check connection to the internet" when I clearly am connected to the internet ?

Hi can anyone help me please this is driving me crazy ! I download and install Abode Digital Editions and when I try to Authorize with my Abode ID information I get the message " Activation Server Problem - check connection to the internet when I clearly am connected to the internet ?

<moved from Downloading, Installing, Setting Up to Adobe Digital Editions>

/SAPAPO/MAT1 customizing

Hi all,
Maybe someone can help me tackle this problem, as I'm not very familiar with SAP APO.
I'm trying to have an authority check on the initial screen of /SAPAPO/MAT1 depending on what "Location" is filled. However, I can't seem to find any user exit or enhancement that could help me do this...
Has anyone had this sort of problem before and knows how to handle it?
Thank you very much in advance!!
Adi

Hi Somnath,
Thanks for your reply
The thing is that I need to do a Supply Network Planner (SNP) authority check only for some certain locations. I think that if I only use the APO Authorization Object you gave me, it will do it always for all of the locations. However, I would like to do it for 2 specific ones for example; which is why I asked for a user exit or something where I can actually check the location first, and then call the auth. object.
Have any clue? Thanks!
Adi

/N/SAPAPO/MAT1 question

Hello Guru,
i have a question on tcode /N/SAPAPO/MAT1, in the extra tab we have a field (Dem Exclu. from SS) can anyone of you know what is the use of this field? can it affect the demand requirement planning in APO?

Hi,
Please follow below path to add/check custom fields in Product Master(MAT1).
SPRO -> SAP SCM - Implementation Guide> Advanced Planning and Optimization>Master Data--> Maintain Freely-Definable Attributes
AT*     --> /SAPAPO/MATLOC (Extra Attribute section in EXtra Tab in MAT1)
ATT*     --> /SAPAPO/MATKEY (Additonal data section in Properties Tab in MAT1)
ATTL*     --> /SAPAPO/LOC     (Addit.Tab in LOC3)
Hope this info will help you.
Thank you
Satish Waghmare

ALV with Check Boxes

Can I get a sample program of ALV (oops) with check boxes in it. thank you.

Types: begin of lt_io.
include structure mara. " Your Structure
Types: style_table type lvc_t_style.
Types: end of lt_io.
data: lt_io type table of lt_io,
ls_layout type lvc_s_layo,
lt_fcat type lvc_t_fcat,
lo_grid type ref to cl_gui_alv_grid.
field-symbols: <io> type lt_io,
<fcat> type lvc_s_fcat.
... fill your output table ....
ls_layout-stylefname = 'STYLE_TABLE'.
loop at lt_io assigning <io>.
PERFORM set_style USING 'CHECKBOX' "Your Filename
CHANGING <io>.
endloop.
... Fill Your Field Catalog lt_fcat
read table lt_fcat assigning <fcat>
where fieldname = 'CHECKBOX'.
<fcat>-checkbox = 'X'.
create grid control lo_grid.
CALL METHOD lo_grid->set_table_for_first_display
EXPORTING
is_layout = ls_layout
CHANGING
it_fieldcatalog = lt_fcat
it_outtab = lt_io[].
FORM set_button_to_line
USING iv_fieldname TYPE lvc_fname
CHANGING cs_io TYPE io.
DATA: ls_style TYPE lvc_s_styl,
lt_style TYPE lvc_t_styl.
ls_style-fieldname = iv_fieldname.
if cs_io-checkbox = ' '.
ls_style-style = cl_gui_alv_grid=>mc_style_enabled.
else.
ls_style-style = cl_gui_alv_grid=>mc_style_disabled.
endif.
ls_style-maxlen = 2.
INSERT ls_style INTO TABLE io-style_table.
ENDFORM. "set_icon_to_status_line
[/code].
A classical report is a program that generates a single list, which must contain all of the required detail information.
1) This procedure may result in extensive lists from which the user has to pick the relevant data.
2) For background processing, this is the only possible method. After starting a background job, there is no way of influencing the program.
3) The desired selections must be made beforehand and the list must provide detailed information.
4) For dialog sessions, there are no such restrictions.
5) The user is present during the execution of the program and can control and manipulate the program flow directly.
6) To be able to use all advantages of the online environment, classical reporting was developed into interactive reporting.
ALV is Application List viewer. Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain up to 90 columns in the display with the wide array of display options.
Advantages.
Collapse multiple reports into one, drastically cutting down your report development time
Save many hours using built-in ALV sorting, subtotaling and filtering capabilities
Add conditional structures into your ALV report: No programming required!
Combine ALV with display variants to meet a wide range of reporting requirements more easily
Dynamically reorder column layouts and add/subtract fields
Enable users and analysts to save their own personalized variants
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
declarations for spl.group.
GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV
GT_SORT TYPE SLIS_T_SORTINFO_ALV, "for sort
DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR LS_SORT.
LS_SORT-FIELDNAME = 'FIELD1'.
LS_SORT-SPOS      = 1.
LS_SORT-UP        = 'X'.
ls_sort-subtot    = 'X'. "subtotal
APPEND LS_SORT TO E06_LT_SORT.
APPEND LS_SORT TO E06_LT_SORT.
LS_SORT-FIELDNAME = 'FIELD2'.
LS_SORT-SPOS      = 2.
LS_SORT-UP        = 'X'.
ls_sort-subtot    = 'X'. "subtotal
APPEND LS_SORT TO E06_LT_SORT.
for creating the group..
DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
CLEAR LS_SP_GROUP.
LS_SP_GROUP-SP_GROUP = 'A'.
LS_SP_GROUP-TEXT     = TEXT-005.
APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
and pass this info to FM...
layout-sUBTOTALS_TEXT = 'SUbt...'
and pass spl group info to fieldcatalog also...
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM      = G_REPID
            IS_LAYOUT               = GS_LAYOUT
            IT_FIELDCAT             = GT_FIELDCAT[]
            IT_SPECIAL_GROUPS       = GT_SP_GROUP[]
            IT_SORT                 = GT_SORT[]
TYPES :
BEGIN OF ty_vbak,
    vkorg TYPE vbak-vkorg,             " Sales organization
    kunnr TYPE vbak-kunnr,             " Sold-to party
    vbeln TYPE vbak-vbeln,             " Sales document
    netwr TYPE vbak-netwr,             " Net Value of the Sales Order
    waerk TYPE vbak-waerk,             " Document currency
END OF ty_vbak.
DATA:
vbak    TYPE vbak,
gt_vbak TYPE TABLE OF ty_vbak.
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg,              " Sales organization
s_kunnr FOR vbak-kunnr,              " Sold-to party
s_vbeln FOR vbak-vbeln.              " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
     Form f_read_data
FORM f_read_data.
SELECT vkorg kunnr vbeln netwr waerk
      UP TO p_max ROWS
    INTO TABLE gt_vbak
    FROM vbak
   WHERE kunnr IN s_kunnr
     AND vbeln IN s_vbeln
     AND vkorg IN s_vkorg.
ENDFORM.                               " F_READ_DATA
     Form f_display_data
FORM f_display_data.
TYPE-POOLS: slis.                    " ALV Global types
DEFINE m_fieldcat.
    add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname   = &1.
    ls_fieldcat-ref_tabname = 'VBAK'.
    ls_fieldcat-do_sum      = &2.
    ls_fieldcat-cfieldname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    ls_sort-up        = 'X'.
    ls_sort-subtot    = &2.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv,
    lt_sort     TYPE slis_t_sortinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    ls_layout   TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
m_sort 'VBELN' ''.                   " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            is_layout   = ls_layout
            it_fieldcat = lt_fieldcat
            it_sort     = lt_sort
       TABLES
            t_outtab    = gt_vbak.
ENDFORM.
Check out these sample programs
BCALV_GRID_01
This program illustrates how the events for print processing PRINT_TOP_OF_PAGE,
PRINT_END_OF_PAGE, PRINT_TOP_OF_LIST,PRINT_END_OF_LIST are handled. The
corresponding handler methods control the appearance of the list printed.
BCALV_GRID_02
Show a detail list in an amodal window. There is no second dynro needed in contrast to
BCALV_GRID_03.
BCALV_GRID_03
This program implements a function on event DOUBLE_CLICK. According to the selected line data
from table SBOOK is selected and displayed by a second ALV Control in a dialog dynpro.
BCALV_GRID_04
Illustrates the use of exceptions (lights or leds). According to the values of SFLIGHT-SEATSOCC, the
lights are set to 1 (red), 2 (yellow) or 3 (green).
BCALV_GRID_05
Demonstrate the creation of an own toolbar button.
BCALV_GRID_06
Demonstrate the creation of an own context menu.
BCALV_GRID_07
Append a menu button to the standard toolbar.
BCALV_GRID_08
Append a menu with default button to the standard toolbar. It is exactly the same as
BCALVC_TB_WITH_MENU except for methods HANDLE_MENU_BUTTON and HANDLE_TOOLBAR.
Editable ALV grids
BCALV_EDIT_01
This report illustrates the simplest case of using an editable/noneditable ALV Grid Control.
BCALV_EDIT_02
This report illustrates how to set chosen cells of an ALV Grid Control editable.
BCALV_EDIT_03
In this example the user may change values of fields SEATSOCC (occupied seats) and/or PLANETYPE.
The report checks the input value(s) semantically and provides protocol messages in case of error
BCALV_EDIT_04
This report illustrates how to add and remove lines to a table using the ALV Grid Control and how to
implement the saving of the new data.
BCALV_EDIT_05
This example shows how to use checkboxes within an ALV Grid Control. You learn:
(1) how to define a column for editable checkboxes for an attribute of your list
(2) how to evaluate the checked checkboxes
(3) how to switch between editable and non-editable checkboxes
BCALV_EDIT_06
This example shows how to define a dropdown listbox for all cells of one column in an editable ALV
Grid Control.
BCALV_EDIT_07
This example shows how to define dropdown listboxes for particular cells of your output table.
BCALV_EDIT_08
This report implements an ALV Grid Control with an application specific F4 help. The following aspects
are dealt with:
(1) how to replace the standard f4 help
(2) how to pass the selected value to the ALV Grid Control
(3) how to build an f4 help, whose value range depend on a value of another cell.
Check this link tooo
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/23/oopsALVin+ABAP&showComments=true
The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
check these links
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
Try these links
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
For More alv report examples check these Tcodes LIBS, BIBS Here u can find more number of examples on alv reports of different kinds
check this sample code for intercative alv report
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
       EBELN LIKE EKKO-EBELN,
       AEDAT LIKE EKKO-AEDAT,
       BUKRS LIKE EKKO-BUKRS,
       BSART LIKE EKKO-BSART,
       LIFNR LIKE EKKO-LIFNR,
       END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
      WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
       EBELN LIKE EKPO-EBELN,
       EBELP LIKE EKPO-EBELP,
       MATNR LIKE EKPO-MATNR,
       MENGE LIKE EKPO-MENGE,
       MEINS LIKE EKPO-MEINS,
       NETPR LIKE EKPO-NETPR,
       END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
      WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
      WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
      WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
      I_VARIANT1 TYPE DISVARIANT,
      I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*&      Form BUILD_FIELDCATLOG
      Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT    = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    "BUILD_FIELDCATLOG
*&      Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     I_LIST_TYPE           = 0
   IMPORTING
     ET_EVENTS             = V_EVENTS
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "EVENT_CALL
*&      Form POPULATE_EVENT
     Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
    WA_EVENT-FORM = 'TOP_OF_PAGE'.
    MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
    WA_EVENT-FORM = 'USER_COMMAND'.
    MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM.                    "POPULATE_EVENT
*&      Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM.                    "data_retrieval
*&      Form bUild_listheader
      text
     -->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM.                    "build_listheader
*&      Form display_alv_report
      text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     I_CALLBACK_PROGRAM                = V_REPID
I_CALLBACK_PF_STATUS_SET          = ' '
     I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
     I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
     I_GRID_TITLE                      = I_TITLE_EKKO
I_GRID_SETTINGS                   =
IS_LAYOUT                         = ALV_LAYOUT
     IT_FIELDCAT                       = I_FIELDCAT[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
    i_default                         = 'ZLAY1'
     I_SAVE                            = 'A'
    is_variant                        = i_variant
     IT_EVENTS                         = V_EVENTS
    TABLES
      T_OUTTAB                          = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "display_alv_report
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = IT_LISTHEADER
   i_logo                   =
   I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP_OF_PAGE
*&      Form USER_COMMAND
      text
     -->R_UCOMM    text
     -->,          text
     -->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN '&IC1'.
      READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
      PERFORM BUILD_FIELDCATLOG_EKPO.
      PERFORM EVENT_CALL_EKPO.
      PERFORM POPULATE_EVENT_EKPO.
      PERFORM DATA_RETRIEVAL_EKPO.
      PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
      PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM.                    "user_command
*&      Form BUILD_FIELDCATLOG_EKPO
      text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    "BUILD_FIELDCATLOG_EKPO
*&      Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     I_LIST_TYPE           = 0
   IMPORTING
     ET_EVENTS             = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH

Report Painter: FAGLFLEXT, profit-center authorization not checked

Hi colleagues,
I am using a Z*-library in report painter based on FAGLFLEXT.
When a report beads on this library is executed, there is no authorization check for profit-center (profit-center groups,…). Wether auth. Object K_PCA is checked nor an entry in RESPAREA.
When I execute a report from FGI3 transaction (also based on FAGLFLEXT) I can see that RESPAREA is checked with PCxxxxyyyy (xxxx = comp. code, yyyy is profit-center).
I thought that, based on the information in the IMG node “activate authorization check for profit centers” which appears if FIN_GL_CI_1 is active, that PC authorization check for reporting is ALWAYS working and I guess, in the mentioned system the authorization check was working before the last support package upgrade.
The important text from the SAP IMG node “activate authorization check for profit centers”: “The profit center display authorization for reporting is not affected by this setting. The system always checks this authorization, be it in drilldown reporting or the Report Painter / Report Writer reports.”
The system is ECC60 on SAPKH60023, so FIN_GL_CI_1 is not available, but I believe, the auth. check for profit-center in report painter reports should work fine without this.
Does anybody know if in ECC60 with a report painter library using FAGLFLEXT the profit-center authorization is checked, which auth. object is checked,...?
Best regards, Christian

Hi,
Please check if the below note helps.
1960689 - Reverting authority check from "E63_AUTHORITY_CHECK" to "E14_AUTHORITY_CHECK" or use both
Thanks

Log changes in /SAPAPO/MAT1 - Product

Hello,
anyone knows if there is a modification log for product master data in SCM for changes done in /SAPAPO/MAT1 - Product ?
We have CIF to create and update product master data from R3 to scm but we have field Forward Consumption Periodo changed and it is ok in R3 so It must have been changed directy in SCM.
Is there any way to see changes in this system?
Tkanks,
Teresa Lopes

Teresa,
It is possible - if change document logging is turned on. In SCM, the system is delivered with the logging turned off. You must explicitly turn it on in order to be able to review changes.
Product master changes can be reviewed in transaction /SAPAPO/PROD_CD_READ. Do not leave product or location blank, use asterisk instead for 'wild card'.
If nothing is found, then logging is not turned on. You can confirm by looking at table CDHDR, where the change data is stored.
To turn change recording 'on', IMG > APO > Master Data > Product > Activate change documents.
Best Regards,
DB49

/SAPAPO/MAT1

Hi Guys,
I have product number with me , and now i want to see the location attached to it , but in /SAPAPO/MAT1 when i press F4 i am getting list of all , location so tell me how to check what are the locations aplicable to this product.
Regards

Hi ,
Go by as suggested by senthil ,
Enter transaction /sapapo/rrp3
enter planning version as 000
enter your *product number * and
press F4 in llocation field it will show you the applicable location.
If you havent find any , it means that your product is maintained globaly but not extended to any specific location
Hope it helps you.
Regards
Ritesh

Authorization with JAAS in JSF with facelets

hi,
can u please hint me where i did mistake.. i clearly mention what i did and what i getting ..i did this in jsf1.2,tomcat6.x
i did JAAS authentication in jsf with facelets.but i am unable to do the authorization with JAAS in jsf
after getting authentication i put the subject in session. if i print the values in suject i got the following out put
Subject:
Principal: TypedPrincipal: hari [USER] // user name
Principal: TypedPrincipal: admin [GROUP] // user role.
now i want to authorization based on the role.
for this i wrote policy file --principal.policy like this
grant Principal com.alw.reports.jaas.TypedPrincipal "admin" {
    permission com.alw.reports.jaas.ViewIdPermission "*";
grant Principal com.alw.reports.jaas.TypedPrincipal "hari" {
    permission com.alw.reports.jaas.ViewIdPermission "*";
grant Principal com.alw.reports.jaas.TypedPrincipal "user" {
    permission com.alw.reports.jaas.ViewIdPermission "/contents.jsp";
};and i set the path for this policy file like
              System.setProperty("java.security.policy", "policy file location" );when i run my application i am getting login page after that i gave username and passwed. it is getting authentication .. but not able to displaying next page that is /pages/welcome.xhtml but directly it is showin /pages/error.xhtml
i am getting following error
java.security.AccessControlException: access denied (com.alw.reports.jaas.ViewIdPermission /pages/welcome.xhtml)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at com.alw.reports.jaas.JAASHelper$1.run(JAASHelper.java:87)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Unknown Source)
     at com.alw.reports.jaas.JAASHelper.permitionToAccessViewId(JAASHelper.java:83)
     at com.alw.reports.jaas.JAASActionListener.processAction(JAASActionListener.java:65)
     at javax.faces.component.UICommand.broadcast(UICommand.java:106)
     at org.ajax4jsf.component.AjaxViewRoot.processEvents(AjaxViewRoot.java:184)
     at org.ajax4jsf.component.AjaxViewRoot.broadcastEvents(AjaxViewRoot.java:162)
     at org.ajax4jsf.component.AjaxViewRoot.processApplication(AjaxViewRoot.java:350)
     at org.apache.myfaces.lifecycle.LifecycleImpl.invokeApplication(LifecycleImpl.java:316)
     at org.apache.myfaces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:86)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:106)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.ajax4jsf.webapp.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:141)
     at org.ajax4jsf.webapp.BaseFilter.doFilter(BaseFilter.java:281)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:263)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:584)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
     at java.lang.Thread.run(Unknown Source)
my faces-config.xml
<navigation-rule>
          <display-name>pages/login</display-name>
          <from-view-id>/pages/login.xhtml</from-view-id>
          <navigation-case>
               <from-outcome>loginSuccess</from-outcome>
               <to-view-id>/pages/welcome.xhtml</to-view-id>
          </navigation-case>
     </navigation-rule>
<navigation-case>
               <from-outcome>errorpage</from-outcome>
               <to-view-id>
                    /pages/error.xhtml
               </to-view-id>
          </navigation-case>my command button in login.xhtml
                         <td align="center" colspan="2">
                              <h:commandButton value="Reset" type="reset"/>
                              <h:commandButton   action="loginSuccess"
                                   id="login" value="Login" />
                         </td>my actionlister
package com.alw.reports.jaas;
import javax.faces.component.UIOutput;
import javax.faces.context.FacesContext;
import javax.faces.event.AbortProcessingException;
import javax.faces.event.ActionEvent;
import javax.faces.event.ActionListener;
import javax.security.auth.Subject;
public class JAASActionListener implements ActionListener   {
     private ActionListener parent = null;
     public JAASActionListener(javax.faces.event.ActionListener parent) {
          System.out.println("-------------- in JAASActionListener ;");
       this.parent = parent;
     public void processAction(ActionEvent event)
       throws AbortProcessingException {
          System.out.println("-------------- in processAction ;");
       FacesContext context = FacesContext.getCurrentInstance();
       UIOutput comp = null;
       String userid = null, password = null;
       JAASHelper jaasHelper = new JAASHelper();
       // Check to see if they are on the login page.
       boolean onLoginPage = (-1 != context.getViewRoot().getViewId().lastIndexOf("login")) ? true : false;
       if (onLoginPage) {
         if (null != (comp = (UIOutput)
           context.getViewRoot().findComponent("helloForm:username"))) {
           userid = (String) comp.getValue();
         if (null != (comp = (UIOutput)
           context.getViewRoot().findComponent("helloForm:password"))) {
           password = (String) comp.getValue();
         // If JAAS authentication failed
         if (!jaasHelper.authenticate(userid, password)) {
           context.getApplication().getNavigationHandler().handleNavigation(context, null, "login");
           return;
         else {
           // Subject must not be null, since authentication succeeded
              System.out.println("----------- setting the subjects in context in ActionListner ");
           assert(null != jaasHelper.getSubject());
           // Put the authenticated subject in the session.
           System.out.println("---- putting the authenicated subject in the seesion ");
           context.getExternalContext().getSessionMap().put("JAASSubject",jaasHelper.getSubject());
       parent.processAction(event);
       Subject subject=(Subject)context.getExternalContext().getSessionMap().get("JAASSubject");
      System.out.println("subject after parent process action>>>>>>>>>>>>>>>>>>>>>"+subject);
      assert(null != subject);
      if(!jaasHelper.permitionToAccessViewId(subject,context,context.getViewRoot().getViewId())){
          context.getApplication().getNavigationHandler().handleNavigation(context, null, "errorpage");
}can u please hint me where i did mistake
thanks in advance

gbabu wrote:
My doubt is based on that subject , how to write policy file and how to call doAsPrivileged() mehod on that Subject in order to navigate web pages.how to provide web pages permission for particular role in policy file..
For example i have three pages login.xhtml,user.xhtml,admin.xhtml.
1> if the logged in person is admin, then we want to display admin.xhtml
2> if the loggend is person is user , then we want to display user.xhtml
untill now i did and found who is logged in and what are his type( admin or user) .now i want configure the web.xml and faces-config.xml based on policy fileTo the best of my knowledge, there is nothing in the standard NavigationHandler which accounts for JAAS security. If you wanted, you could create a custom NavigationHandler to do this. If you think the idea is worthy enough, you could issue an enhancement request to the specification ([https://javaserverfaces-spec-public.dev.java.net/]).

Existing authorization processes are based on current template

Hi!
In 8.8 the "Cannot update stage;existing authorization processes are based on current template" message shows up, when we want to change the user for a given approval stage.
Our partners did it quite frequently in version 2007A, and succeeded to do so, because there were no checks for existing authorization processes. Now there is. And "existing authorization process" in this case means more than pending approvals for that stage. It also covers those processes, that has been approved by this user, but are waiting for other stages, or waiting for the author to create the invoice. This whole procedure takes usually quite a long time, new processes could be initiated during this time, so it's hard to find a moment when there isn't any "existing" processes.
I suggest you to revert to the former functionality.
The check for "existing authorization processes" is quite unnecessary: When we want to change an approval stage it has nothing to do with existing processes, we want to make the change for newly created approvals. And it didn't cause any problem in earlier versions either.
Our partners usually needed to change approvers, when the original one was out of office, so somebody needed to substitute him/her. It's getting more and more critical since christmas is coming soon.
Regards,
Gergely Humicskó

Hi,
As per SAP note 1660690,
"When the draft is generated an alert is registered and sent to the Authorizers. These alerts cannot be retroactively sent to newly added Authorizers"
This is the reason why system is not accepting update of approval stages.
Thanks & Regards,
Nagarajan

Import PO with GR based

Hello.
We are Going for Import PO.
We are creating the Import PO with Gr based Indicator. now Tax code is Zero.
Customs clearing account is seprate.. from that A/c we will pay the Customs amount.
So while doing the MIRO for Customs.(planned delivery cost from MIRO option), system will generate the Commercial exc Inv No.
So when i go for MIGO with ref to PO. then system will Popup the Commercial Exc Iv no then we will cancel from MIGO screen .
Then system will shown me the Full PO qty's BED ,ECS and SECess and AED... but iam capturing the MIGO partaily.... Excise base value also shwon in USD.....
Regards
sapman man

Hi there,
What i understood from your thread is you want to do the Excise invoice for partially and pay duties to the custom vendor for the partial quantity of goods receipt, for the same you can change the duty and the quantity while doing the MIRO trax. So the same data will flow when you will enter the MIGO screen and mention there the commercial invoice number.
For partial delivery check in your vendor settings, the GR based INV verification should be marked. For multiple currency check your settings in SPRO. The sytem defaults the same from vendor master.
Hope it helps
Regards
Sujoy

Duplicate checking based on the content of the incoming file

Hi,
We have a requirement where in we have to check whether a file has been duplicated or not based on the contents of an incoming file.The threads which I have seen in SDN deal with the duplicate checking based on the filename of the incoming file.
The incoming file has the following structure :
Recordset                                     Occurance-1
       |....... Idoc                              Occurance 1...unbounded
                   |...... segment             Occurance 1
We are required to make a check based on certain fields which occur in the segment.There are about 4 fields which we will have to take from the incoming file and carry out the check.These 4 fields exist in different segments.We will have to update a ztable with these 4 fields and then perform an rfc lookup to check for the contents of the incoming files with this table,and reject or process the file based on whether the entries exist in the table or not.
Please let me know if there is any way this can be achieved.
Appreciate if anyone could help me on this.
Thanks and Regards,
Induja

SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
Use this crazy piece for any RFC Mapping Lookups!
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5877---- [original link is broken] [original link is broken] [original link is broken]
Imp
SAP NetWeaver Process Integration 7.1: Mapping Enhancements Blog Series
SAP PI 7.1 Mapping Enhancements Series: Mapping Enhancements Demo
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
How to check JDBC SQL Query Syntax and verify the query results inside a User Defined Function of the Lookup API
The specified item was not found.
The specified item was not found.
Making CSV File Lookup Possible In SAP XI !!!
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1888-----Imp [original link is broken] [original link is broken] [original link is broken]
Triggering XI Alerts from a User Defined Function
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II

I can sync icloud calender with pc based outlook calender. But contacts do not sync. Could anyone help me with this?

I can sync icloud calender with pc based outlook calender. Photos also sync. But can not sync contacts. Already checked contact boxes in icloud and and on my PC. Also tried to reset Document & Data on icloud. Could anyone help me on that?

That's what I did... switching on iCloud calender in the panel leads to the following: The existing local Outlook calendar gets mved to an new iCloud calendar.Thus the local calendar is empty.
Given that iTunes dows not allow my whife's phone to be synced with that iCloud calendar (only the local acalendar appears in the list of available calendars in iTunes; syncing all dioes not include the iCloud one) this leads to an empty alendar on my whife's phone.
Hence the question how to
a) get iTunes to include the iCloud calendar to sync with the iPhone 2g (preferred) or
b) enable a local MS Outlook internal sync between the two calendars.

APO /SAPAPO/MAT1 Authorization with check based on SNP planner

Similar Messages

Maybe you are looking for