APO Selection Window Save Button missing

Dear All,
In some transactions in APO there is the option to input some selection criteria and using some buttons (icons)  offered in that window you could execute some action like "delete", "Load Selection" or "selection screen help" .....want I am missing here is the button to "Save" on selection.
Does somebody knows how could I get this button displayed in the selection window?
as sample you can take the /SAPAPO/SDP94 transaction an then the "selection window"button on the left side.
I will appreciate any suggestion on this regard
Thanks
FedeX

Hello,
For this tcode initially save button wont be there ,but when you enter some data, you will get the save button.
Thanks,
Prasant K Paichha

Similar Messages

  • Reader X on Windows - Save button stops working for PDFs in browser if open back to back PDF files.

    I'm using Firefox under Windows XP SP3 and I'm noticing problems saving PDF files opened in a browser page, such as those at financial institutions.   Normally when I open a PDF I can click the "Save" or press CTRL-SHIFT-S to save.  The problem appears to occur if I open a PDF file and the two acrord32.exe processes are already running on my machine because I recently opened another PDF file.  In that case neither the save button or keyboard command works.   I have to close the page with the PDF file on it and either wait for the acrord32.exe processes to go away on their own or kill them.  Then I can open a PDF and the save button works.
    Steps to reproduce:
    1. Go to this URL (or any PDF on web) and press the save button, it will work - https://www.your-fundaccount.com/rotary/DownloadCenter/Sample.pdf
    2. Close the tab and then immediately open a new tab and go to the same URL and press the save button again.
    Expected Results:
    1. Save button should work.
    Actual Results:
    1. Save button does not work.
    Work Around:
    Either wait for the acrord32.exe processes to terminate on it's own or kill them before opening another PDF web page.

    Announcement: Would you like to help us improve Adobe Reader?
    Hi All,
    We have had a few bug reports related to Adobe Reader X protected mode coming in from you in this forum. We have addressed a large number of them in our upcoming Reader update and we would like to hear your feedback.
    To that extent, we would like to invite you to the Adobe Reader Prerelease program and try out the latest build. To participate, please fill in the form available athttps://www.adobe.com/cfusion/mmform/index.cfm?name=reader_prerelease_ interest and indicate Adobe Reader as the product of your interest.
    We look forward to your active participation, feedback and help towards making Reader a better product.
    Thanks and regards,
    Adobe Prerelease Team

  • After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window.  The save button greys out.  Solutions anyone?

    After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window.  The save button greys out.  Solutions anyone?

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
    This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
    If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • How can i make save button of a pop up window inactive?

    Hi...
    When we open a document attached to an opportunity,
    a pop up opens up in new window with open,save and cancel buttons.
    The document is opened by creating a url....
    How can i make the save button inactive?
    Any helpful pointers would be rewarded...
    Thanks...

    Hi..
    This thread remains closed...

  • How to disable save button on selection screen (1000) run from other report

    Hi Experts,
    Can any one let me know how to disable save button on selection screen (1000) run from other report.
    Say I am running from report R1 which submits report R2, but the save button should be disabled on
    report R2(selection screen 100).
    Thanks in advance.
    Regards
    RP.

    Hi RPReddy16 ,
    Try this:
    DATA :BEGIN OF t_extab occurs 0,
                     fcode like rsmpe-func,
                 END OF t_extab.
    REFRESH T_EXTAB.
    MOVE 'SAVE' TO T_EXTAB-FCODE.
    APPEND T_EXTAB.
    CLEAR T_EXTAB.
    SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
    Regards,
    José

  • Am I missing some fundamental  thing? "Save" button on LC NOT saving

    I am using a Mackie Logic control and today an annoying bug has returned in Logic Pro 8.0.2
    The "save" button DOES NOT SAVE.. the light on the LC flickers when you press the save button, but until you press "apple-S" the light will remain on, and the project will not save.
    I have selected "Rebuild Defaults" to no avail... anyone?

    Only works sometimes for me, though saves everytime. The light remains however.

  • Save button in apps do not trigger business rules but close window does

    In our apps custom form the save button (and F10) generate the normal message that the information is saved in the database, although no business rules are triggered.
    Only when the window is closed by the user the business rules are triggered.
    It is possible to create several records with one orderscreen and save them, though only when the window is closed, the application asks again for the orders to be saved and then the business rules apply.
    What can this be?
    The only reference in the databaselog are several messages like the following:
    Error 2091 trapped in 2PC on transaction 3.68.28343. Cleaning up.
    Error stack returned to user:
    ORA-02091: transaction rolled back
    ORA-02290: check constraint (HST65.QMS_NEED_TO_CLOSE_TRANSACTION) violated
    Fri Jul 4 15:46:42 2003

    Hans,
    I don't have an answer for you, but maybe your problem is related to the one in thread PL/SQL update not working against 9iR2 DB . I hope that the information in that thread can help you solve your problem.
    kind regards,
    Sandra

  • Why does the menu option change to "save as" after I select the print button?

    why does the menu option change to "save as" after I select the print button?

    >>The print command is selected in the File pull down menu, the print menu page pops up, I can then select my networked printer (which incidentally is confirmed to work with other software), the print command is in the bottom right hand corner and finally after depressing this print button a "save as" pop-up menu appears and then it only re-saves the file. Is this an issue with the pdf reader install?  

  • Pop Up Window on click of save button

    Hi ,
    I am very new to WebDynpro Java.
    Can somebody plz help me??
    My Requirement-
    On Click of the Save Button ,a Pop Up window should get displayed with a message saying "SUCCESSFULLY SAVED".
    Plz reply soon
    Thanks In advance!!
    Regards
    Smita

    hi!
    1.create a action on the button click
    2.create a value node(popup)--> value attribute
    set the cardinallity as 1..1 and type as com.sap.tc.webdynpro.
    services.session.api.IWDWindow
    3.
    public void okPopup() {
    // @@begin okPopup()
    // get the repository content at runtime of the Web-Dynpro-
    IWDWindowInfo windowInfo = (IWDWindowInfo) wdComponentAPI
    .getComponentInfo().findInWindows("okWindow");//give your window name
    // create the u201CokWindowu201D
    IWDWindow window = wdComponentAPI.getWindowManager()
    .createModalWindow(windowInfo);
    // set the WindowPosition on the screen
    window.setWindowPosition(300, 150);
    // and show the window
    window.show();
    // Save WindowInstance in Context
    wdContext.currentPopupElement().setWindowInstance(window);
    // @@end
    4.now you can take text views to show the required message in the popup window.for that you can take the message from message pool and also you can directly write the message in the text property of text view.
    please get back to me if any further clarification is required.
    thanks
    vishal

  • Disable Checkbox, once i select checkbox & click on save button

    Hi All,
    Once i select checkbox & click on save button
    then Checkbox will Disable, in moodule pool programming.
    Thanks

    Hi,
    Add the below code in PBO.
    loop at screen.
       if screen-name = 'CH1'
         if g_save = 'X'.
           screen-input = 0.
         else.
           screen-input = 1.
         endif.
         modify screen.
       endif.
    endloop.
    Add the below code In PAI
    case okcode.
      when 'SAVE'.
        g_save = 'X'.
    *code for saving data
    endcase.
    Hope this helps.
    Thanks,
    Balaji

  • How to call a popup window when click save button

    Hi, expert
    the scenario is :
    we we create a order , we click the 'save' button,
    then there will show a popup window,
    in the window, there are buttons like 'confirm' , 'cancel' and also show some info about the order.
    how can i do that.
    Thanks
    Oliver.

    Hi ,
    Try to redefine the method and use the IV_TEXT parameter in the CREATE_POPUP_2_CONFIRM method (usaully comes from the Component Controller ).
    Regards
    Vikranth

  • When I try to download iTunes for Windows I get a download Dialog but when I press the Save button, nothing happens

    I am trying to install iTunes on my Windows PC (I've tried on a W7 W8 and W8.1) After clicking the Download Now button my browser goes to the Thank you page and I get an Opening iTunes64Setup.exe dialog with a Save File and a Cancel button. I press Save File but nothing else happens.

    No, Nothing happened, nothing was downloaded. When I say nothing happened I mean NOTHING HAPPENED, What can I say to make it more clear. How could I run a file that wasn't downloaded.....Nothing happened, rien, nada, b***** all. Why would I post a message saying "When I press the Save button nothing happens" if something had been downloaded.
    I've found out why. It is because I am using Firefox. Presumably a case of Apple treating us users of the superior Operating system (Windows) with distain.

  • Session should logoff on click of save button in webgui window

    Hi All
    I am directly changing section 80 details using WEBGUI ervices( PA30 tcode with infotype 585 in change mode) WITH BELOW URL
    'http://XXXXXXXXXXXXXXX/sap/bc/gui/sap/its/webgui?~transaction=*pa30%20RP50G-PERNR=' lv_aempid
    ';RP50G-choic=0006;RP50G-SUBTY=4;RP50G-begda=01.01.1800;RP50G-endda=31.12.9999;DYNP_OKCODE=CHG'
    So user able to change their details using above URL, but when user clicks on save button, it is showing PA30 main screen..I want o know how to avoid this screen...
    My requirement is when user clicks on Save button, it should save and logoff from session.*
    Regards
    Srinivas

    Try to use CALL FUNCTION 'ITS_END_SESSION' in the user-exit.
    Of couse you must check that it is webgui session (not sapgui).
    Hope this helps

  • BSP-Error while adding a "Save-Button" to a View

    Dear Community,
    I have created a UI-Component which contains a Window and a View. I already connected the view to the window. What I'm trying now is to add a "Save-Button" to save the input of the view. This is my Structure:
    The Code of USERINPUT.htm is as follows:
    Here are my Questions
    1) What exactly do i need to put into parameter "id" and "table" within the configCellerator? My window and view are connected and when it opens there should be the "Save-Button".
    2) When I select "Test" my browser opens but I cannot see the preview, intead I get this exeption. Is my code wrong or where is my mistake?
    Thank you for your help!
    Marcel

    Hi Marcel,
    if you want to create buttons in your form view there is a method in your implementation class that is
    get_buttons.
    you have to implement the method IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS from your implementation class.
    example:
       *****************SAVE***************************************************************************
      CLEAR ls_button.
      ls_button-type     = cl_thtmlb_util=>gc_icon_save.
      ls_button-on_click = 'SAVE'.                              "#EC NOTEXT
      ls_button-page_id  = me->component_id.
      ls_button-enabled = abap_false.
      IF view_group_context IS BOUND.
        IF view_group_context->is_any_view_editable( ) EQ abap_true AND lr_entity->is_changeable( ) =abap_true.
          ls_button-enabled = abap_true.
        ENDIF.
      ENDIF.
      APPEND ls_button TO rt_buttons.
    * Toolbar Divider
      CLEAR ls_button.
      ls_button-type     = cl_thtmlb_util=>gc_separator.
      ls_button-enabled  = abap_true.
      APPEND ls_button TO rt_buttons.
    And write an event handler for this:
       METHOD eh_onsave.
      DATA: lr_core    TYPE REF TO cl_crm_bol_core,
            lr_entity  TYPE REF TO cl_crm_bol_entity,
            lr_tx      TYPE REF TO if_bol_transaction_context.
      lr_entity ?= me->typed_context->btadmini->collection_wrapper->get_current( ).
      lr_tx ?= lr_entity->get_transaction( ).
      IF lr_tx IS NOT BOUND.
        lr_core = cl_crm_bol_core=>get_instance( ).
        lr_tx = lr_core->begin_transaction( ).
      ELSE.
        IF lr_tx->check_save_possible( ) = abap_true.
          CHECK lr_tx->save( ) EQ abap_true.
          lr_tx->commit( ).
        ENDIF.
      ENDIF.
      me->view_group_context->reset( ).
    when ever you want to call any transaction while button click go through this link..
    call transaction launcher on button press with parameter passing
    you can come to know how to call.
    in that doc you have to create one transaction launcher for your standard workflow. then that tcode you
    need to call using that concept..
    if you want to create table view  go through this link..
    SAP CRM WEB UI : 43.CREATING TABLE VIEW FOR LINE ITEMS WITH DEPENDENT CONTEXT NODES
    CRM Web UI Technical - Creating Table View In Web UI - CRM - SCN Wiki
    Thnaks & Regards,
    Srinivas.

  • Windows boot manager boots almost fully into windows 8 before letting me select windows 7, at which point it reboots my computer

    Hi,
    I haven't used my slow HDD with windows 7 on it in a while, but today my SDD with windows 8 on it died. I have kept my old OS in a dual boot setup exactly for this rare possibility. I in fact successfully revived my SSD from windows 7.
    During the restore procedure I had to boot into both OSes (7 and 8) several times before I managed to get 8 working. I tried a lot of things before one of them struck. (Is that how the phrase goes?
    Me Hungary, no good speak English some times...) I am surprised to have found the following unexpected behavior of the new windows 8 branded boot loader:
    The new windows boot manager boots almost fully into windows 8 before letting me select an OS.
    If I select windows 7, it reboots my computer and loads windows 7, wasting a lot of time... on the windows 8 portion of the boot process, which is simply thrown away if I happen need windows 7 and not 8.
    "This is highly inefficient!" — I almost exclaimed aloud... A boot manager should load just enough of itself so that a simple OS selection menu can be presented to the user with minimal keyboard interaction. Only when a selection is made should
    it load an OS. I have no use for the new boot manager's mouse control support, and having it appear on the second screen in my dual screen setup is just plain scary. Use the main laptop monitor where the BIOS messages were displaying, and keep the secondary
    off until the OS is done booting! By the time my secondary screen turns on, the boot selection menu disappears anyway.
    Yes, I only noticed this problem now because I haven't booted into windows 7 for a long time. (300 MB worth of Windows updates were waiting for me indeed.) My boot selection menu timeout is set to 3 seconds instead of 30 so I don't have to pick windows 8
    every time.
    I am going to wait at least a week for the forum's input before I switch on my own to a faster, minimalist boot manager. I don't know what to use, I'm familiar with:
    some minimalist bootstrap loaders
    coreboot/linuxbios (recently learned of it)
    bootcamp (not really)
    acronis OS selector (discontinued before windows 8 came out, probably doesn't support it)
    syslinux/isolinux (Linux only, I think)
    old Windows bootmgr
    more recent Windows ntldr
    then this new "inefficient for dual booting" Windows 8 boot manager
    and finally grub
    Grub feels like the best option as it keeps the windows boot manager intact and supports mac, windows, and linux. All 3 of which will at one point — or has already — come up as a subject or prerequisite in my university.
    I don't know how or why I was able to access windows 8's boot loader while my SSD was dead. Was it installed on the HDD, overwriting the windows 7 boot loader? That too is inefficient. I want to completely boot from my SSD. Don't spin up my HDD while I'm
    booting my laptop on the go! The shaking of the vehicle I'm in could seriously damage the disk if I run into a pothole (common in my country) with just the right timing, data could be damaged. The entire reason windows 8 is on an SSD is so that it can boot
    without accessing my HDD with all its moving parts. My goal with buying an SSD was for the HDD to remain safely offline while I'm in a shaky environment with potholes! Also, what if I want to disconnect the old HDD in the future... Or what if it dies? Will
    the windows 8 boot loader die with windows 7? I want the two kept separately and completely independent from each other for exactly this reason.
    In summary:
    How can I stop windows 8 from almost fully booting before offering the dual boot OS selection menu? Do I need a better Boot loader?
    Why was the boot loader that came with windows 8 still working OK while the SSD with windows 8 on it wasn't accessible? Did it sneak its way onto the old HDD? I want a 100% SSD-based boot process. What is the boot loader doing on a different drive? Its
    place is on the SSD, with the operating system it belongs to. Not on the HDD of a different OS. Can I move it?
    Sincerely,
    Daniel "3ICE" Berezvai
    p.s.: For windows 7 I only have a repair disk and hidden RECOVERY partition which I kept (came with the laptop, would rather not use it.) The Windows 8 pro DVD (purchased last year) is fine, but I had it moved to a bootable pendrive so I could remove my
    optical drive and replace it with an SSD on which windows 8 is installed now. (I also have a vista ultimate DVD, as they were giving them away for free on a Microsoft conference. Funny story.)
    p.p.s.: I am subscribed (☑ Alert me) to this topic and will respond to all questions and try all recommended actions right away.
    http://3ice.hu/

    Hi,
    Thank you for your post.
    From your description, I see the issue you are facing is there is no menu to choose OS when booting dual boot(Windows 7 & Windows 8). Please let me know if I have misunderstood anything.
    It seems that the Windows 7 entry is missing, currently, we can use a tool –
    EasyBCD to get it back. After downloading it, choose the Add/Edit panel item, select the OS you're missing and let the program detect it. Then simply click the Add button to add the missing OS entry.
    At the meantime, here is a related link which demonstrates how to keep Windows 7 as the default OS in dual boot, you may use it for a reference.
    How to Dual-Boot Windows 8 While Keeping Windows 7 As Your Default OS
    http://blog.laptopmag.com/how-to-dual-boot-windows-8-while-keeping-windows-7-as-your-default-os
    [Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy
    of this information.]
    Regarding your second questions in your first post, you can refer to the following link to know more about dual boot.
    Dual
    Booting Explained: How You Can Have Multiple Operating Systems on Your Computer
    http://www.howtogeek.com/187789/dual-booting-explained-how-you-can-have-multiple-operating-systems-on-your-computer/
    [Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy
    of this information.]
    Hopefully the information is helpful. Please let me know if you have any questions. Thanks for your time.
    Best Regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for