APO - SNC integration

Hi All,
We have activated both the BF's SCM_APO_DISTR_REC & SCM_SNC_GEN_1. We have mapped the Proact_Out to Proact_In to receive demand from APO system to SNC system. We are using /SAPAPO/PROACT_OUT - Send Demand Data to send Deamd from APO system to SNC.
But when we receive Proact_In message from SAP XI system into SNC sysetm it remains in scheduled status. The message does not get processed.
Are we missing any SNC setting to receive the Forecast in SNC from APO?
Thanks
Gaurav

Hi Gaurav Gupta
Were you able to fix this issue ? We are also facing the same issue with APO SNC integration. PROACT_In messages are stuck in scheduled status.
Please let me know how did you fix it.
THanks,
Ankit

Similar Messages

CFolder and SNC Integration

Hi Experts,
We are integrating cFolder with SAP SNC (Supply Network Collaboration) application. Both SNC and cFolder application are installed on the same server. We have activated cFolder within SNC application. As per SAP help, we have not added any RFC destination for cFodler as it is on the same server as SNC.
Now when I try to open cFolder link from SNC application, it throws an exception
             "Error in CFX Call: An exception occurred that was not caught."
I checked ST22 for the error and found that the application is not able to find cFolder URL. It is failing at below code:
             get relative ERL
             e_url = cl_cfx_fol_ui =>get_url_for_fol(
                     icol_id        = l_col_id_str
                     i_area_id   = l_area_id_str
                     i_topic_id = i_topic_id_str
                     i_role         = ' ' ).
I can see that relative collaboration folders are created in cFolder. cFolder application when opened directly from SE80 is opening properly. So it is evident that SNC is able to communicate with cFolder and also able to create collaboration folder. However, when the cFolder window is opening, it fails.
Request you to please help on how to solve this issue.
Regards

Hi,
The DP & SNC cannot be integrated on the fly, SAP also does not give the option to enable the integration. Technically APO & SNC use two different databases. If there is a need there has to be custom development to achieve this.
There are numerous ways to achieve this using custom development. One possibility is download the keyfigures (forecast) & convert to the XML message (confirming the XML format required for SNC) then upload them using the SAP standard interface using SPROXY transaction. Now you can see the forecast data of DP in SNC.

DP and SNC integration

Hi,
How can we publish forecast results from APO demand planning to SNC directly and vice versa, without routing through R/3?
Regards,
Raghavendra Udupa

Hi,
The DP & SNC cannot be integrated on the fly, SAP also does not give the option to enable the integration. Technically APO & SNC use two different databases. If there is a need there has to be custom development to achieve this.
There are numerous ways to achieve this using custom development. One possibility is download the keyfigures (forecast) & convert to the XML message (confirming the XML format required for SNC) then upload them using the SAP standard interface using SPROXY transaction. Now you can see the forecast data of DP in SNC.

SNC Integration

Hi,
I am into new project right now....where I need to develop interfaces from SAP to SNC vice versa.
Can anybody share their experiences with SNC integration?
Whats the major difference between....Normal XI scenario than SNC integration.
-Esha

Nadh,
SNC integration would be the same as you do to a normal integration. The only difference is in a normal integration you have to built your own data types, message types etc.
But for SNC there is a predefined content given by SAP. So you can use them directly. Also they have predefined mappings where you can use them directly if you are using a standard messages. If their is customizations then you may need to change according to your requirements.
Check sap help link in the above reply which may give you an idea. If you have any specific question then post it here, somebody may help you.
---Satish

ASN Config for SNC Integration

Hi All,
I am currently working on SNC 7.0 integration with ECC system.Our scenario has to be designed like this.
PI will be hosting a Webservice on the external partner and they will generate the ASN and the generated ASN will be routed to the SNC system.From there it will be routed to the backend ECC system.
I am aware that for routing the ASN from SNC to ECC we have the standard mapping available between Despatch delivery notification and DESADV.DELVRY03 in the standard SNC SWCV.
But for PI hosting the webservice,is there any standard WSDL for ASN config available?If it is available what is the corresponding Service interface and Operation Mapping?Please guide me on the same.
Incase there are no standard WSDLs available for ASN config in the service registry how can PI host the Webservice?
By default will there be any standard WSDLs publised in Service registry?
When we import a Standard SWCV will the WSDL get imported in Service registry automatically?
Any help is greatly appreciated.
Thanks,
Sowmya
Edited by: sowmya venkit on Oct 26, 2009 6:59 AM

Solved

APO - R3 integration

Hello ,
In R3 System we have a option to "Integration with other sap component"--->Advanceed Planer and Optimizer-->Basic Settings for Setting Up the System Landscape-->Specify SAP APO Release ( Via SPRO )
My queries are
1> After upgrade , release of SCM is changed to SCM 5.0 but still settings containing old APO release. <b>Will it cause problems</b>?
2> if we want to change it, how it can be done? ( <b>means ways to do it</b>.I know one direct change through SPRO. Is there nay other way?)
Thanks in advance for your help.
Regards,
Tushar Chavan
Message was edited by:
Thushar Chavan

Hello Somnath,
We have to change client setting because if we try to maintain New APO release
via SPRO or via T.Code NDV2, it gives error saying :"Changes to Repository or cross-client Customizing not permitted"
Thats why we have to change client settting via scc4.
One more thing is there any way to change this setting to all connected systems
automatically rather than doing it manually to every system connected to APO.( NOW SCM 5.0 )
Regards,
Tushar

APO-ERP Integration - Publication

Hi,
I am trying to create the CIF Integration for the first time and see in APO that I have to make some settings for data transfer.
my question is about the publication:
1. do I have to maintain the distribution definitions for a secific plant?
2 or would it be enough to generate the distribution definitions for a range of publishing types per location?
3. do I have to maintain Object-Specific settings? for example for publishing types "In-house production"
thank you in advance!
br,
Pilvi

Pilvi,
This discussion belongs in its' own thread. It shouldn't be mixed with campaign planning questions.
That said, there are a lot of questions to be asked about your environment.
Is SEQCLNT120 replacing SEQCLNT100? You can't have both ECC systems active with shared master data unless the business process are separate. The business group should identify the primary ECC system that is integrated with APO.
*IF* the master data is the same in both systems and *IF* the same master data is selected by the integration models and *IF* you are replacing one ECC system with another, *THEN* you can use the same integration models. I would create new models to be sure of what master and transactional data are included in the IM's..
Also, delete the old distribution definitions and create new ones to publish to SEQCLNT120. I think you can cut and paste the new ECC logical system in //CP1.
Of course, you need the RFC connections set up between SEQCLNT120 and APO001.
Best Regards,
Mike

Steps: SNC (Supplier Network Collaboration) Integration with ECC through XI

Hi,
Has anyone worked on the SNC(Supplier Network Collaboration) integration with SAP ECC via SAP XI.
Could you pls share any documentation related to this. And also could anybody tell me the setup required to go ahead with the integration.
Thanks,
S

Hi Xavier,
SNC integration with XI has predefined mappings. So ask your basis guys to download the XI content for SNC using with PI. Once they deployed you will have a builtin predefined content in XI. Within the predefined content mostly they all are xsl mappings.
If your requirement is with the standard idocs then you can use them directly. Else if their is customization they you may need to change the mappings according to your requirements.
Also check this help:
http://help.sap.com/esoa_scm_snc2007/helpdata/en/index.htm
Regards,
---Satish

SNC-cFolder integration pointers needed

Hi All,
We have followed the steps given in SAP SNC integration with cFolder from help.sap.com but still we are facing issues for cFolder activation, it will be great if anyone can share pointers or a document as reference for this integration.
We have installed SNC as well as cFolder on same server.
Best Regards,
Avinash

is this not possible through SAP PI 7.11 for handling tockenization, authorization and settlement operations of credit card?
Yes, it is possible.
How we can eliminate the logging of credit card details at PI?
You can schedule the deletion of PI messages for this interface on a daily basis.
Also, you can restrict the authorization for users to check the details of messages in PI monitoring.
Let us know what exactly is your requirement, may be you can use the various message and transport level security that PI provides.

Extracting Data from APO PP/DS to BW

Hi Gurus,
I'm trying to extract data from APO PP/DS (SCM 5.1) to BW (BI 7.0). I'm new to SCM and am not sure how the extraction from SCM to BI happens other than that we need to read data from LiveCache.
The extractor we are interested are
0APO_PPDS_RESCAPREQ_01
0APO_PPDS_PROD_CUST_01
0APO_PPDS_OPERATION_01
0APO_PPDS_ORDER_01
Pls kindly help me out with the procedure.
Thanks in advance.

Hi
Have a look at the below urls..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f229690-0201-0010-84ba-9ee5a8958a05
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fe5d590-0201-0010-6c8d-ada86492cf11
Re: APO to BW Design Question
Re: APO BW Integration
Hope it helps
Thanks
Teja

Consignment stock vs Unrestricted Stock in SAP APO

DC ( has vendor co location) -------> Tier 2 location ( garage)
can consignment stock (ECC) be considered for replenishment at Tier 2 location in SNP APO by Heuristics / optimizer?
to account for replenishment at Garages from the DC locations , can the consignment stock at DC be used ?
does Heuristics / optimizer consider it to propose transfer orders ?

Hi Ashfaq,
You can plan these stocks in APO by integrating it using CIF.
You can activate the transfer of vendor consignment stocks in the integration model by using the Storage Location Stocks indicator in the CIF integration model.
Make sure that the vendor master data must be contained in the same integration model as the stocks.
Cheers
Ajay

BW-APO Business Content

Hi,
Does anyone have some documents about BW-APO (DP and SNP) Technical documents like: Business Content and other ETL process? .
Appreciate your inputs?

Hi,
Take a look at the docs on BW-APO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f229690-0201-0010-84ba-9ee5a8958a05
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fe5d590-0201-0010-6c8d-ada86492cf11
If you are looking at information on APO-BW integration, go through these links.
Re: APO to BW Design Question
Re: APO BW Integration
Regards,
Sunil

R/3 numbers are not reflected in APO

HI
i transfered planned order from PPDS to R/3. it successfully CIFed as production order but R/3 production orders are not reflecting in APO. all integration models are in active status. what will be the reason

Hi Thennarasu,
One or more of the input products(components) have special procurement key set in R/3 material master for withdrawal from another plant.
Planned orders are changed in SAP APO and then the conversion indicator is set to initiate conversion into a manufacturing order.
But the queue from SAP APO to SAP R/3 hangs with an error message that indicates that the material in question is not maintained in the certain storage location of a specified plant.
As a result, the planned order is not converted.
Check to maintain the storage locations in customising - Enterprise Structure->Definition->Materials Management->Maintain Storage locations. Here maintain the storage locations of the Plant from which you are procuring the components under the Plant which requires them.
Please confirm
Regards
R. Senthil Mareeswaran.

BW - APO

Hi All,
I am into project BW with APO. I have gone thru the forums and got an idea on APO with BW.
My doubt is
In APO Only DP(demand planning) has the integration with BW?
Is it true? and also can any body give some knowledge on this?
And also please forward me the doc's if any body have?
Regards,
Madhu

Hi,
check this links........
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/apo%2b-%2bbw%2badhoc%2breporting
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/bp_biv335/BI_EN/html/BW/DemPlanAnal.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f229690-0201-0010-84ba-9ee5a8958a05
Re: APO BW Integration
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fe5d590-0201-0010-6c8d-ada86492cf11
APO and BW
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate%20bw-bps%20and%20apo-dp.pdf
http://help.sap.com/saphelp_scm41/helpdata/en/7e/63fc37004d0a1ee10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm

BW-APO Training

Hi All,
Curently I am in Hyderabad. Can any body suggest me good training institute for BW - APO.
Regards,
Madhu.

Hi,
Check these............
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/apo%2b-%2bbw%2badhoc%2breporting
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/bp_biv335/BI_EN/html/BW/DemPlanAnal.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f229690-0201-0010-84ba-9ee5a8958a05
Re: APO BW Integration
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fe5d590-0201-0010-6c8d-ada86492cf11
APO and BW
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate%20bw-bps%20and%20apo-dp.pdf
http://help.sap.com/saphelp_scm41/helpdata/en/7e/63fc37004d0a1ee10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm

APO - SNC integration

Similar Messages

Maybe you are looking for