APO TPVS - BI Content ?

hi experts,
we are implementing APO and we have got modules like DP,SNP,PP/DS and TPVS modules.
can you pl provide me the documentation for BW TPVS  implementation and ,if there is any BI Content data sources, DSO,Info cubes? send me the links plz?
regards
venuscm

Hi ,
Please check if this helps you
http://help.sap.com/saphelp_scm41/helpdata/en/64/de3d820673b14d9a0c9ca380174c3e/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/aa/a2101219643241b53f22830ef0da98/frameset.htm

Similar Messages

  • How do Changes in shipment made in ECC get updated in APO TPVS?

    Hi All,
       Suppose a shipment is created in APO TPVS and transfered to ECC. Now After shipment has started I get to know that due to some issues shipments will end 3 days after the planned date. Say Shipment start date is 1 st and planned end date is 5th of the month. Now on 2nd of the month I get to know that due to vehicle break down there will be a delay of 3 days and shipment will end on 8th of the month. Is it possible to change the planned end date in ECC so that same gets updated in APO as well.So that same can be captured in next planning run and resource will  not be planned again till 8th.
    Rgds,
    saurav

    Hi Saurav,
    You have genuine query.
    I have seen the details of Carrier assigned in ECC going back and updating APO. However, for the resource it might be difficult.
    You can try looking at different options available in function module "CIF_SHIPMENT_SEND".
    I guess this might help you in proceeding further.
    Regards,
    Vivek

  • APO TPVS vs SAP TM

    Hi,
    Can anyone give me a brief description of what the difference is between APO TPVS and SAP TM (Transportation Management). Also what would be pros and cons to implementing either module. Also is there an interface between SAP TM and R/3.
    Currently we have R/3 installed but not APO.
    Thanks
    Rob

    Dear Rob,
    SAP TMS is a new development after APO TP/VS. TMS has got all the features of APO TP/VS plus some additional features.
    TMS has got tight integration with R/3.
    Please find the document on the following link,
    It will solve most of your queries... Still if You have any queries lemme know....
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d0d6d3-9f28-2b10-b297-dca5a11f2cff
    Regards,
    Mohit

  • APO TPVS Resource weight volume changes

    Dear all,
    We are using SCM7.0 APO TPVS. We need to change thewt volume of the MOT and its resources. The resource is assigned to a planing version. In order to unassign the MOT from the planning version for changing the wt /vol its taking around 3 hrs.we raised a call to sap they say bcoz of huge data in live cache this is happening. asked us to delete daya from live cache like orders etc.
    We have around 150 MOT changes to be done.
    Is there any way we can change the WT/VOL of the MOT and resource without unassigning the MOT from the planning version.
    Please reply.
    regards
    ashutosh

    Hi Ashutosh,
    Check out transaction code:MASSD.
    This may be helpful.
    Regards,
    Nikhil

  • APO objets in BW

    Hi,
    I want to have a APO Object in BW system.
    The APO Object is 9ALOCNO but i could not see this objects in my BW.Since this being a APO info objects i could not find.Please tell me now to load these infoobject 9* info objects into my BW sytem.
    Kindly reply for this message.
    Regards,
    sid

    Hi,
    All the APO related Business Content InfoObjects start with 9A and also BW related Business Content InfoObjects start with 0 . Since APO itself has a BW instance in it , if ur doubt is related to BW instance in APO then u can always use that object in the Cubes or ODS's . But if u are working on Separate BW Instance then u need to either create same infoObject which is similar to 9ALOCNO in BW and Map to it while extraction or find in Business Content whether there is any InfoObject in BW which matches 9ALOCNO.
    Regards,
    Vijay.

  • Difference between SCM242 and SCM250

    I am preparing for certification and wanted to know What is the difference between SCM242 and SCM250?

    am not sure of SCM242. where did you see the reference to this?
    but here is some more info. You can also find it in https://service.education.sap.com
    SCM250 (Production Planning and Detailed Scheduling (APO-PP/DS))
    contents:
    Brief overview of prerequisites and master data
    Preplanning and sales orders in APO-PP/DS
    Requirements planning
    Planning quantities and capacities
    Planning heuristics
    Planning strategies
    Advanced production planning functions
    Planning tools for requirement and capacity planning
    Corresponding Customizing settings
    SCM240 (Production Planning (ERP))
    contents:
    Material planning overview
    Consumption-based planning and MRP planning
    Demand management
    Requirements strategies for make-to-stock production
    Requirements strategies for make-to-order production
    Performing requirements planning
    Processing of material requirements planning results
    Master production scheduling
    Long-term planning
    Technical details of the planning run
    MRP areas

  • Difference between 4.7 and 6.0

    Hi Folks.
    Please let me know what are the differences between version 4.7 and 6.0.
    tks

    Hello Eduardo,
    I assume you are referencing SAP R/3 4.7 and SAP ECC 6.0 in your post below and the functionalities provided by LES (Logistics Execution), specifically Logistics Execution Transportation.
    Please note that this forum has a focus on SAP Transportation Management which is a new application in the SAP space. It is a designed as a standalone application and resides outside of R/3 respectively ECC.
    The initial version of SAP TM was SAP TM 6.0, in the meantime we are on SAP TM 7.0.
    I can only encourage you to study the material available on the Service Marketplace at http://service.sap.com/scm-tm or also on the BPX WIKI  at Transportation Management [original link is broken] to understand the differences between the solution offerings.
    The link below is valid for a couple of weeks and can be used to download a presentation from SAP Insider comparing SAP ERP LES, SAP APO TPVS and SAP TM.
    https://sapmats-us.sap-ag.de/download/download.cgi?id=8RXYJJD2TYXO5KC91XNO6G4PMK027J3W0V906RYKFDY9NS7LZM 
    Kind Regards,
    Bjoern

  • BW-APO Business Content

    Hi,
    Does anyone have some documents about BW-APO (DP and SNP) Technical documents like: Business Content and other ETL process? .
    Appreciate your inputs?

    Hi,
    Take a look at the docs on BW-APO
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f229690-0201-0010-84ba-9ee5a8958a05
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fe5d590-0201-0010-6c8d-ada86492cf11
    If you are looking at information on APO-BW integration, go through these links.
    Re: APO to BW Design Question
    Re: APO BW Integration
    Regards,
    Sunil

  • How to get apo Business content

    Hi i am installing SD business content, where i need to install apo data source 0APO_PPDS_CDS_1 too. But it is not available in SAP R/3. help me to  get it.
    vennila

    You can still activate this DS in BW side. However if you have no APO system available they will simply not be used.

  • Any APO Vehicle Scheduling DataSources in BI Content?

    Hello all.
    I need to get data form APO Vehicle Scheduling
    into BW. I can't find in BI Content help any content
    objects suitable. Are there any?
    If there is no, what views/tables should I use for
    generic DataSources?
    Thanks,
    Timofei

    Hema,
    Usually the Asserttion_FAILED dump is due to PSA - delete the data in the PSA Tables - Ideally using SE14 and deleting / dropping the data in the tables and then check the same.
    Warm regards,
    Arun Varadarajan

  • How to access the pre-delivered XI Integration Content for APO ,SCM or CRM

    Guys,
    Do anyone know how to access the pre-delivered XI Integration Content for APO ,SCM or CRM and load onto the XI server.
    Any inputs in this direction is appreciated.
    Thanks, -Vara.

    Hi VaraPrasad,
    you can try:
    1. https://websmp204.sap-ag.de/swdc
    2. Search for all Categories
    3. type: XI content
    then unpack and the easiest way is to import with the file system:
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/content.htm
    and you have the content on your XI
    Regards,
    michal

  • Business Content for APO

    Hi Experts
    Where can i find Business Content (Reports,Cubes,DSO..etc) avaliable in BI 7.0 for APO
    Thanks

    Pls search in Help.sap.com with the key 'Business contents for APO'

  • List of hardware we need for implementing APO DP,PPDS &TPVS

    Hi Gurus,
                  Can anyone please let me know the list of space and harddisk we need to get for implementing DP, PPDS & TPVS to one organization ,
    We have around 50 users over with all the modules listed above
    DP--- cvc max 50,000
    PPDS---2000 products 3 locations
    It will be really great help.
    Thanks
    Regards,
    Raj

    Raj,
    Not enough info.  However, you are in luck.  SAP offers a do-it-yourself web app called QUICKSIZER in which you can answer the questions yourself.
    Quicksizer output will give you storage reqments, and it will also create a standardized measure of processing power requirements.  This standard measure is understood by all the major hardware vendors, and they can quickly give you the actual hardware you need to buy, based on your desired manufacturer, CPU, and operating system.
    http://service.sap.com/quicksizer
    I suggest you download the 'Using the Quicksizer' docs first and give them a read. 
    http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000071577&
    Then go into the app and create a project.  You can save the project and re-open it if it takes you several sessions to complete the data entry.
    Rgds,
    DB49

  • APO Product Master: New Freely Defined Attribute

    Dear Experts,
    We know than in the spro, you can defined up to 5 free attributes for the product Location master than appear in the Tab EXTRA.
    We would like to create a new one, I mean, a 6th one. The issue is that, even we are able to create it in the spro, we do not see it in the Product Master and therefore, we are not able to maintain it.
    Does anybody have the same issue? Wich kind of posibilities do we have?
    Thanks a lot for your help,
    Susana

    I concur with the previous reply.
    This is not possible.
    I have used all the 5 additional Fields in the past in DP Macros to store & use values on product-locations that are not available in Standard APO Product screen.  But the Limit is 5 and this can be seen in /sapapo/matkey table and /sapapo/matloc tables as well (via Trnx. SE11).
    However In addition, you can create 'Z' Tables in ABAP.  Alternatively you can save Additional masterdata in your own customer created TimeSeries Planning Area of which the Characteristics will be Product and Location only to save anything additional you need in TS Planning areas.  Alternatively a BI InfoCube can be created with same characteristics. The Userexit can then Grab data from this InfoCube or Z Table to do whatever you want.
    Typically it is common that Demand Planning MACROS use it in their Code Logic.  Remember, none of the additional attributes are used in the Standard Planning Algorithms / Logic of SNP, PPDS, DP or TPVS.  You have to write Custom Logic which is possible via Demand Planning Macros in Planning Books created on that Planning area.
    So the Best Option for Additional Fields is a TimeSeries Planning area which DP Macros can be built to use. Of course the Standard 5 can be in Product Master (/sapapo/mat1) and then additional to whatever number you want can be in the TimeSeries Planning area.
    Hope you find this usefull.  Reward points if you do.
    Regards,
    Ambrish Mathur

  • How to delete all contents in the LiveCache

    Hi,
    Is there an easy way to delete all LiveCache contents (all SNP and DP data)?
    Thanx for quick info

    Additional information...!
    Hi
    In APO SNP, if you only delete the time series it will not delete the inactive material from it.
    If you go to APO material master i.e. /SAPAPO/MAT1 - Product  you will still find your inactive products. By deleting the time series, you are only deleting the data from time series key figures, but you will still have the data in order series key figures.
    You can require to delete these products by mainly using following steps.
    a) Remove product from integration model
    b) Delete all orders for this product-location which still exist in the APO system by running the reports /SAPAPO/RLCDELETE or /SAPAPO/DELETE_PP_ORDER (this report is not recommanded to be used in product system!!) or transactions /SAPAPO/RRP4 or /SAPAPO/RRP4.
    c) Use transaction /sapapo/ccr to delete all objects in APO that are integrated with R/3. The /sapapo/ccr will show the orders as 'Not in an active integration model' and offers to delete the orders in APO
    d) Delete the product from ATP tables by running the report /SAPAPO/SDORDER_DEL with the selection according to the product being deleted. (Orders from DB & live cache)
    e) Delete all related product substitution and location product substitution using the transaction /SAPAPO/RBA04;
    f) Delete the product from all PPMs through the transaction /SAPAPO/SCC05;
    g) Remove the product from external procurement using the transaction /SAPAPO/PWBSRC2;
    h) Remove the product from transportation lanes through the transaction /SAPAPO/SCC_TL1 or /SAPAPO/SCE; Note: If the lane was created with option 'All products', you should not care about this condition.
    i) Remove the product from quota arrangement through the transaction /SAPAP/SCC_TQ1;
    j) Remove references from the product master or the location product master using the transaction /SAPAPO/MAT1, tab 'Classification';
    k) Remove the planning package from the location product master using the transaction /SAPAPO/MAT1, tab 'PP/DS';
    l) Remove the product from RTO;
    m) Remove the product from product split.
    2. Mark deletion flag
    a) In transaction /SAPAPO/MAT1, select the product (and location in case of location product);
    b) In the menu bar, choose 'Product' and go to 'Mark for deletion' (Shift+F6);
    c) In the popup 'Set deletion Flag' set a flag in the appropriate field: Leave the field 'Product' empty unless you want to delete the product master, i.e. in case a location product must be deleted, the flag has to be set on location only;
    d) The deletion can be executed directly or be scheduled for another time.
    Use Report /SAPAPO/DELETE_PRODUCTS for deletion.
    Once you delete all the products, than you can again open the CIF to bring in the new products.
    I hope this will helpful to you.
    Thanks
    Amol

Maybe you are looking for