APO Version @ ECC6.0

Hello,
we are planning to Upgrade our core system from 4.7 to ECC6.0.
We are currently using a separate APO System with Version SCM4.1.
Is it possible to stay with this APO version or do we have to upgrade it as well?
If we don't have to upgrade: What PlugIns do we need wor APO and the core system?
Where can I find further information?
Thx in advance,
Matthias

Hello Mathias
You dont need to upgrade APO also. I think from ECC6.0 onwards CIF is integral part of R/3 and you would not need plugins to integrate it with R/3. Hope this answer your question.
Thanks and Regards

Similar Messages

APO Version

Hello,
we are planning to Upgrade our core system from 4.7 to ECC6.0.
We are currently using a separate APO System with Version SCM4.1.
Is it possible to stay with this APO version or do we have to upgrade it as well?
If we don't have to upgrade: What PlugIns do we need for APO and the core system?
I guess the PI Plug-In for the core system is delivered with ECC6.0 right?
What about APO? What PI Basis Patch / Patchlevel do we need?
Where can I find further information?
Thx in advance,
Matthias

Dear,
The link is 'Integration of SAP R/3 / Enterprise, ERP and SAP Components' -> "SAP APO / SCM" which is in the left side under R/3 plug-in iten.
Note that on SAP ECC 6.0 and subsequent releases will automatically contain ALL integration interfaces that so far have been contained in the SAP R/3 Plug-In and that ensured the technical integration with other SAP Components. The Strategy Change is also well described in SAP Service Marketplace.
Regards,
Lucio

How to Use Function_Loader_Inlay in SCM APO Version 4?

Hi ,
I was going through the SE38 - Program - Function_Loader_Inlay , to check the possibilities of upload and download product/location combinations in SCM APO version of 4.0.
But I am not able to use it as per the selection screen given.
Please let me know if some one has used the same.
Any inputs regarding the documentation OR how to use would be appreciated.
Thank you - Prasad.

HI,
We do not use this program.
For Characteristic combination creation as per product- location we use transaction /sapapo/mc62 inthat
Create characteristic combination --> infoprovider file
I would also like to know more about APOLoder which uses program which you have mentioned.
Function_Loader_Inlay report is no official SAP software.
It encapsulates ApoLoader functionality inside APO system

Help in creating XML documents in ABAP using XI in new version ECC6.0

Hello All:
I am pretty comfortable with XML and XSLT but new to XI. Is there a way of creating XML documents in ABAP using XI in new version ECC6.0? Please provide me with any links or any information you may have. All the answers will be rewarded.
Thanks.
Mithun

hi,
U cant create XML data in ABAP.
to send the data to the XI, u have to use the IDOC or RFC FM, from there IDOC or RFC adapters will read the data in the same format and these adapters will convert the data in to XML .Bcoz XI understand only XML data.
from there XI will process and route them to Destination, by using anthor adapter.
here u can use file adapter if u want data in file foramat from the IDOC or RFC .
So XI is the integration tool only.
reward points if helpful
ragards
sreeni

Transporting of z objects form Older version(4.6c) to newer version(ecc6.0)

Hi All,
Now i am involving in Technical Upgradation from 4.6C to ECC60.I want to know some information regarding transportation of Z objects in older version to newer version(ECC6.0).Please help me in this regard.
like tables,dataelements,domains,reports,scripts,smartforms,userexists,Variants,report layouts(all are z objects),text elements.In the above list which will be transported automatically and regarding which abapers have to takencare i mean to say which will be not transported automatically...
and tell me obsolete keywords information..which will be obsoleted in ECC6.0...
thanks in advance
awaitinf for reply..
Points will be Rewarded for helpfull Answeres
Thanks & Regards
Samit

Hi Julio,
you can find the answer in the SAP note
Note 552711 - FAQ: Client copy
point 4.
So the answer is : NO
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

PP Version & APO Version

Dear All,
We have Versions in APO & Versions in PP.
I am clear on versions in APO, but what is the difference between the two, can anyone explain & summarize.
Thanks
Team Acceval

Dear All,
Our query should have been Versions in R/3 or ECC versus Versions in APO.
Because in the R/3 IMG there are settings for versions under
1. APO
2. Basic Data
3. Batch Management
4. Demand Management
5. Logistics
6. Logistics - General
7. LIS
8. Master Data
9. MRP
10. Purchasing
11. Supply Chain Planning Interfaces
All of these have a bearing on APO
Mohit, thanks for the inputs, if all details are available on SAP help, then there is no need for forums such as these right?
Dear Senthil & Harsh, Many thanks for the explanations.
We are looking for answers in light of the above points on Versions in ECC versus APO
If no further inputs are available, we award points to Senthil & Harsh
Regards,
Team Acceval

ERP Upgrade: Changes in Reporting in new version ECC6.0

Hi Gurus,
We are just in upgrade process from 4.7c to ECC 6.0. During the test we ascertained that there are certain changes happened in the reporting functions und the reports are not showing some necessary fields in new version. For instance the reports RFDOPO00 and RFKOPO00 are replaced by RFDEPL00 and RFKEPL00 in ECC 6.0, which do not show some important fields of old report. SAP says they are standard reports in ECC 5.0 /6.0.
How can we maintain old reports (in general, not specifically these above mentioned reports) from 4.7c in our new upgraded system ahead instead of new reporting standard of ECC6.0.
Please tell me the steps to solve this problem.
Regards
SIM

No, there is slightly difference in reporting between both versions ERP 4.7C and ECC 6.0. For instance in old version 4.7c we can produce reports (RFDOPO00 and RFKOPO00) with Subtotal and Total by currency by making check mark on both these items. In new version this items has been removed. There are also some more items which are not offered by SAP in new version.
As we have decided to keep some old reports in new system, Can you therefore please tell me how we can keep the old reports in new version?

Email triggering program in version ECC6

Hello experts,
In version 4.6c, program RSCONN01 will trigger all email requests waiting in the queue to be sent out. After upgrading to ECC6, the same email requests now have status of 'Still no entry in queue' and never be triggered by the program. SAP has recommended to put a COMMIT WORK as a pamameter to the function module or as an ABAP statement in the calling program to send emails. This can lead to program errors if COMMIT WORK is not put at the right place.
Did SAP create a replacement program that can be used to trigger those email requests with such status? Do you have any other ideas or solutions? Please help!
Best regards,
Chuong Le

in ST05 there is an option for RFC trace. Not sure how much detail that will give you but you can try.
It is possible that your userid doesn't have an RFC call authorization in R/3. Do a SU53 immediately after running the program.
Also, replace the FM with any other FM that you know for sure runs (eg some BAPI FM) and run it - either in SE37 in R/3 with RFC destination for BW, or, from your code itself and see if that works (you can check return code).

Syntax error. SAP 3.1 version - ECC6

Friends,
Following statement given syntaxt error in ECC6.
It is working fine in SAP 3.1.
I need to copy the code from SAP 3.1 to ECC6.
DO VARYING l_char FROM l_text2+99
NEXT l_text2+98.
Please help me in this regard ASAP.
Thanks in advance.

I was able to get the following to work:
DO 100 TIMES VARYING l_char FROM l_text99(1) NEXT l_text98(1) RANGE l_text.
ENDDO.
I had to add the "100 TIMES" or the loop continued beyond the range of the variable and short-dumped.
Hope this helps,
Mark S.

How can create badi in version ECC6.0

Hi All,
How can u crate Badi in ECC6.0.We r in Ecc6.o.Ofter giving SE18 and enter badi name and press create button.It will not accept to creat the badi instead of dey giving error(we have to create first enhancement spot).
Coupd any one help regarding this.
Thanks

Hello Anil,
In SE18 transaction try using the Menu Path
Utilities-Create Classic Badi
With Regards
Avisesh.

QS41 in Version ECC6.0

Dear all
After upgrade from R3 4.6 to ECC6.0, we can't directly create/change catalog in productive system using QS41. After click 'create/change' , the system always pop up the message 'Client xxx has status 'not modifiable'. Experts, cloud you pls tell me which basis customizng/package miss or it is impossible to create/change catalog directly in productive system under vesion ECC6.0 but transported from customzing system. By the way, we can create/change catalog and generate one request number in customing system .
Many thanks!
Edited by: pinknaive on Feb 24, 2010 8:56 AM

We had our BASIS folks help us....
How to make updates to Quality Catalogs not require a transport.
1. In IMG, find the configuration line for the object (EDIT CATALOGS) and just u201Chighlightu201D the object: (like Quality Management> Quality Planning> Basic Data> Catalog> "EDIT CATALOGS"
2. From the EDIT menu, select u201CDisplay IMG Activityu201D.
3. Select the Maint. Objects Tab, then double-click on one of the u201Ccustomizing objectsu201D (in this case V_QPGR_CL).
4. On the resulting screen, make sure the u201Ccurrent settingsu201D check box is checked.
5. Do the same for the other customizing objects listed (in this case V_QPAM_CL).
Hope this helps.
Jackie SEals

Instances, mandants et montée de Version (ECC6)

Bonjour,
L'idée est de savoir avec nos licences, déjà existantes avec le package NetWeaver, les possibilités d'installation.
En effet nous voudrions pouvoir avoir :
- plusieurs instances pour un module donnée (instance de formation, de maquettage, bac à sable...) et pouvoir également sauvegarder avec une de copie des différents mandants.
- installer les modules SAP IS-U FI-CA HP5 (ECC6 avec intégration avec FI-CO, SD et PM), SAP CRM 7.1 ou 7.2, SAP BW 7.3 , SAP BO4 (voir l'adhérence avec BW et si notre licence de démo nous le permet actuellement),Portail, Solman et PI.
Dans lu2019attente de votre retour,
Cdt,

Bonjour,
L'idée est de savoir avec nos licences, déjà existantes avec le package NetWeaver, les possibilités d'installation.
En effet nous voudrions pouvoir avoir :
- plusieurs instances pour un module donnée (instance de formation, de maquettage, bac à sable...) et pouvoir également sauvegarder avec une de copie des différents mandants.
- installer les modules SAP IS-U FI-CA HP5 (ECC6 avec intégration avec FI-CO, SD et PM), SAP CRM 7.1 ou 7.2, SAP BW 7.3 , SAP BO4 (voir l'adhérence avec BW et si notre licence de démo nous le permet actuellement),Portail, Solman et PI.
Dans lu2019attente de votre retour,
Cdt,

APO version 5.0 Vs SP20 (IE 8)

Hi All:
Has anyone of you had problem with APO 5.0 when you upgrade your environment to Windows 7 and IE8? Pl. let me know.

Dear Narayanan Sangameswaran ,
for further help on this please check the notes 147519 and 66971.
Please also check the the Product Availability Matrix on http://service.sap.com/pam
I hope this helps.
Regards,
TIbor

Parked invoice in 4.5b version not posting in ECC6

I am on Tech upgrade 4.5b to Ecc6. Some invoices were parked in 4.5b by using MR41 and need to post by FBV0 in new version ECC6 EPH4. System does not allow to post these invoices. Error message is :
- You can no longer user transaction MR01
- Internal error (read error SMBEW, key = 000000002000008508090000000000)
Message no. M8782
Procedure
Contact your system administrator
regards
imdad

Hi,
This is a programme error. You have to check & implement SAP note 326826. Otherwise contact SAP directly . I hope this will help you.

Unable to Open Bex report from SAP APO User Menu

Hi All,
I am an SAP APO consultant, and have not miuch expereice in BEx reporting. As APO uses Build in BI for reporting and pulling history from either external BW or R/3.
Now my issue all BEx reports we use are assigned ot my user menu and when I select a report, I would expect report to open but an excel sheet opens and closes and nothing happens. However I am able to open this reports from my desktop menu selecting Business explorer and Analyzer and linking my SAP system. I use Excel 2007 , Is this some compactibilty issue or is there anything I need to do?

Hi KV,
There's a couple of possible root cause why you dont see properly the Bex Report.
Can you share to me the APO version and the BW software component being used?
In case this is still in the 3.x, 4.x APO, I think, a separate BW add on is needed for you to run your BEx report properly. You can ask your basis team for this separate installation.
Btw, is this report working before, meaning was it pulled successfully already in the past?
Can you try doing this again in a separate workstation, as the BW add on is installed separately per workstation.
Its possible that this is also an auth issue that the user you are using is not capable enough to run BEx.
As of now, I have not encountered any Bex issue that is related with the Excel version, I have tried running Bex in Excel 2007 no issue also. I think it maybe more related with the OS you are using, if its in Vista already what I know is you need to add your excel as a trusted document before you can run bex fro Vista.
Let me think of other possibilities.
Hope this helps.
- Jeff

APO Version @ ECC6.0

Similar Messages

Maybe you are looking for