Apogee Dither in Logic 9: Should there be a status window that says "Dithering" and a progress bar like in Logic 8?

When I used Logic 8 there was a status window post bounce for the application of dithering from 24 to 16 bit. In Logic 9 there is not a status window: After the bounce it's done processing audio. I'm using the Apogee dither. Is this a change, i.e. can the dither be applied real-time or something else that I haven't considered, or is this an error? I've bounced a bunch of audio since I downloaded Logic 9 on a clean box, and it never shows a status window for the dither. I enjoy using a dither because I can hear a difference in quality in how the dither preserves some data from the 24 bit spectrum, instead of truncating ("removing," or "leaving out") the 24 bit data (I believe that it's the lower 8 bits that are truncated, if no dither is applied). I'd appreciate anyone who knows leaving a reply, because I'd hate to release audio and find out later that the quality bits were left out. Thanks!

This seems to be integrated into the bounce process. Try it out with a sine wave @ -80 dB or lower.
Best,
DaCaptain

Similar Messages

When troubleshooting information page appears there is no confirmation window that says "Restart Firefox"

your information page shows a confirmation window "Reset Firefox to its default state" no such window appears when I go to the Troubleshooting information, only a long list of details.

Firefox 10.0.2 doesn't have a Reset button on the "Help > Troubleshooting Information" page.
Any special reason why you use such an old Firefox version?
What kind of issues do you have?

Hello there, there is a rare window that keeps popping up every time i start Logic. I'd like to send a screenshot... anyway, it's a "tempo" window with strange layout about midi effects and so,.... is it normal? How can i improve this? Thanks.

hello there, there is a rare window that keeps popping up every time i start Logic. It's a "tempo" window with strange layout about midi effects and so,.... is it normal? How can i improve this? Thanks.

Hmm, that's some sort of MIDI Arpeggiator setup in your environment. Strange that you don't know it, this has to be custom-installed, it is not part of the standard setup.
You can do two things about it:
1.unlock your current screenset (shift-L), then close the (Bass Driver) window, then relock the screenset (shift-L). Next time you open up this project you won't see the Bass Driver, but it is still in the project.
2. You can remove the whole page: open the Environment (cmd-8), then go to the dropdown menu arrow top left of the Environment window and select the Bass Driver layer. If it is selected, dropdown again and choose Delete. Now Save your project under a different name (Save As...), so that you still keep the Bass Driver setup in the original project. If you don't need to keep it, you can simply Save.

I am having problems to run logic pro 9, there is an error display that says I need to set bonjour and that this app serial number has been used by another red user, could anybody guide me?

I am having problems to run logic pro 9, there is an error display that says I need to set bonjour and that this app serial number has been used by another red user, could anybody guide me? actually, my computer can't start since three days ago, could it be the same problem?

Logic is the APPlication (program, app) that you are having the problem with.
Logic Pro can take advantage of other computers on your local (home or work) network to help it do "heavy lifting" data chores by using Bonjour and a feature called Nodes. It seems that Logic is attempting to find and connect to another machine on your network.
Do you have Logic installed on another computer there? That may be the source of the confilict.
You might want to post this question in the Logic Pro Community.
Be sure to indicate the version of Logic Pro that you are using. I'm sure the folks there can help you out.

I am having problems to run an app, there is an error display that says I need to set bonjour and that this app serial number has been used by another red user, could anybody guide me?

I am having problems to run an app, there is an error display that says I need to set bonjour services

Logic is the APPlication (program, app) that you are having the problem with.
Logic Pro can take advantage of other computers on your local (home or work) network to help it do "heavy lifting" data chores by using Bonjour and a feature called Nodes. It seems that Logic is attempting to find and connect to another machine on your network.
Do you have Logic installed on another computer there? That may be the source of the confilict.
You might want to post this question in the Logic Pro Community.
Be sure to indicate the version of Logic Pro that you are using. I'm sure the folks there can help you out.

HT201269 I'm updating from my iPhone 4 to the iPhone 5 and have been 'restoring' for 2 hours now and the progress bar still states I hae 6 hours remaining. Will it really take this long? How long should a restore take? It's a 32gb device. Thanks.

I'm updating from my iPhone 4 to the iPhone 5 and have been 'restoring' for 2 hours now and the progress bar still states I hae 6 hours remaining. Will it really take this long? How long should a restore take? It's a 32gb device. Thanks.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

Hi, i am a littl confused as I logged into creative cloud and bough the in design plan for a year but i cant seem to donwload it... there is a window that pops up and it says its downloading but its taking forever? any advice?

hi, i am a littl confused as I logged into creative cloud and bough the in design plan for a year but i cant seem to donwload it... there is a window that pops up and it says its downloading but its taking forever? any advice?

Hi Dima,
Please refer to the help documents below:
Troubleshoot Creative Cloud download and install issues
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

I am unable to connect to the internet, there is a pop-up that says "We're sorry, but the Safari browse version you are currently using dos no support the community toolbar". My computer does say that it is connected to the internet until I open Safari.

I am unable to connect to the interent. At the top of the screen my computer says that I am connected. When I open up Safari there is a pop up that say "Community Toolbar We're sorry, but the Safari browser version you are currently using does not support the community toolbar" and when the Safari page opens up it says "You are not connected to the Internet. Safari can't open the page .... because your computer isn't connected to the Internet." I have tried Network Diagnostics and tried to reset Sfari, empty Cache as well as deleted all of my interent history. I am unable to use Time Machine because I never set it up. If someone knows how to help I would very much appreciate it!!

Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085

I just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot. please help :)

i just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot. please help

Just FYI
QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
http://support.apple.com/kb/DL27 <-- Quicktime 7.5.5

After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and a progress bar under it. What should i do?

After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and the progress bar under it. Held the power and home button, the phone shut off, and restarted the progress. If i try to turn the phone on, it keeps telling me to connect to iTunes. Once I do, it asks me to restore, i click restore, but it keeps on freezing at the screen. What is the problem? Error 1603 comes up. Followed the link to apple's page but nothing that was said there worked.

See Here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Is there a program or setting that looks for and installs software updates?

Is there a program or setting that looks for and installs software updates?

System Preferences > Apps Store
Enable all those options.

When I am trying to burn my playlist, there is an error message that says "cd/dvd software not found" How do I fix this?

When I am trying to burn my playlist, there is an error message that says "cd/dvd software not found" I can burn in windows media but not itunes. I have tried to uninstall and reinstall itunes but it still does not work. Please help!!

I ran the diagnostics check and this is the message:
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 10.7.0.21
QuickTime 7.7.3
FairPlay 2.2.19
Apple Application Support 2.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00C4AB4403487290
Current user is not an administrator.
The current local date and time is 2012-12-05 23:52:38.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
The driver AFS.SYS is installed on the system.
iPodService 10.7.0.21 is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.

HT5188 Nearly every time I buy a VPP app and download the spreadsheet there are multiple redemption codes that say that they are invalid! HOW can a code I am getting directly from apple be invalid!!!!!!!! Seems like your system has A LOT of flaws.

Nearly every time I buy a VPP app and download the spreadsheet there are multiple redemption codes that say that they are invalid! HOW can a code I am getting directly from apple be invalid!!!!!!!! Seems like your system has A LOT of flaws.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Theres 4 games on my ipad screen that say waiting and a game that says installing but isnt it seems like there froze how can i delete these?

theres 4 games on my ipad screen that say waiting and a game that says installing but isnt it seems like there froze how can i delete these?

Try This...
Close All Open Apps... Sign Out of the Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

After a series of very short power outages in my town our Imac boots with the pinwheel going and a progress bar, then the users screen comes up but our passwords no longer opens up desktops, just returns to the users choice screen. What should I do?

I'm on the choose a user screen and when I enter the password the screen goes white then returns to choosing a user. The system is rebooting differently when I tried turning off then back on, the pinwheel screen has a progress bar and it takes minutes instead of seconds.
what should I try?

You can try an SMC reset, especially if there was a power outage.
http://support.apple.com/kb/HT3964
If the issue seems like it just doesn't want to accept the password you'll need to boot to the install disc/recovery partition of the hardrive by holding the 'option' key while booting up. There should be a utility in there to reset your password.

Apogee Dither in Logic 9: Should there be a status window that says "Dithering" and a progress bar like in Logic 8?

Similar Messages

Maybe you are looking for