Apogee Duet control panel - missing in Logic Pro X

Hey Guys
I'm asking on behalf of a friend who uses Logic in his home studio...
He has recently updated from Logic Pro 9 to LPX, and has noticed that the Apogee control panel that is integrated in Logic seems to be missing.
Does anyone know whether this has been removed permanently, or whether a driver update is required from Apogee?
Cheers and thanks in advance!
Mike

Updated:
There are new drivers now up on Apogee's website that are supposed to provide LPX compatibility
Apogee Electronics Announces Logic Pro X Compatibility
Santa Monica, California, July 17, 2013 - Apogee Electronics is pleased to announce full Logic Pro X compatibility for the following products:
JAM*
MiC*
ONE for Mac
ONE for iPad & Mac
Duet
Duet 2
Duet for iPad & Mac
Quartet for iPad & Mac
Ensemble
Symphony I/O (USB, Symphony, and Pro Tools HD modes)
Symphony 64 PCIe
Symphony 64 | ThunderBridge
X-Symphony equipped X-Series and Rosetta Series Converters
For detailed Logic Pro X setup and operation, please see the latest release notes, users guide and Apogee KnowledgeBase articles at www.ApogeeDigital.com.
However, from other threads i have read. the control panel feature is not yet working in LPX. Apogee have said they are working on it... but no further news as yet.
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=97533
Ask your friend to contact Apogee directly and they will likely email him when the next update is ready for release.

Similar Messages

  • Logic Board Replaced -Nvidia Control Panel Missing

    Hello kind readers and helpers,
    My laptop had to have the logic board replaced (twice) because of a faulty Nvidia GeForce 8600M GT card.
    Upon its return, the Nvidia Control Panel was missing from the System Preferences and I'm now limited to the
    adjustments I can make to the screen. The Nvidia Control Panel used to be there before the board got replaced.
    I really need access to more detailed adjustments as I edit photos and video on my laptop and the current
    display setting adjustments available in system preferences are just not cutting it... I need my Nvidia Control Panel
    back!!
    Can anyone tell me how to achieve this? I went to the NVidia website to try to download the drivers, but they
    have no support for laptops!! Ough, faulty graphics chips and no laptop support!! Really?!
    Please help me guys!!!
    Thank you so  much! =)

    Laura Carlos wrote:
    Hello guys,
    Just FYI, with the Nvidia Control Panel the resolutions available to me were much higher than those available in the display system preferences; 2048 x 1536 at 85Hz (VGA) and  2560 x 1600 at 60 Hz (DVI). Now, the highest resolution available is 1920 x 1200.
    Thank you for your time and support! =)
    Ahhh, now it's making sense. You have a 17" (I have a 15"). 1920x1200 is the highest resolution possible on the built-in 17" display. Your MBP can output 2560x1600 to an external display, but that's dependent on the external display's capabilities. I wonder if that Sys Pref you're asking about only shows with an external monitor? Would that fit your experience?

  • Using the Transport Controls of O2R96 for Logic Pro MMC

    Hi guys! They have done a nice job on Logic Pro 7.1.0 with getting it to talk to the O2R96 every start up. It's a pleasure not to have to go into Control Surface Setup everytime... There are still a few issues that they haven't yet resolved with the Control Surface that used to work amazingly well on Logic 6.4.2...
    Firstly, as I am really used to using the Transport Controls on the O2R96 for playback control when mixing a session down. As one's head never needs to leave the "sweet spot" you just edit till happy (never having to continually turn to the HDR, etc)... Well, on the O2R96 (I'm using version 2 of the O2R96s operating system), ever since I upgraded to Logic Pro 7.0.0, but the Transport Controls don't function at all... Not even the Suffle! They did when I was using Logic Pro 6.4.2. Has anyone else complained of this problem yet?
    Also, have noticed that when mixing tracks down using the O2R96 as the main Control Surface, that the faders on screen miss out values between -0.5 and +1.2, so that the 0.0 Unity level cannot be drawn manually into the automation just using the Control Surface Faders. This is annoying, as this slight jump can cause a blip in the mix that stands out like a sore thumb and can take hours of editing to get rid of them... Again, have you had reports of anyone else finding this?
    If you have any solutions, would be very obliged...

    Got the transport controls working at last. Thanks Dave (from www.logicprohelp.com)! Faders still glitchy between -0.5 and +1.2. No unity level...
    Tried adjusting "Control Surface" MIDI Bandwidth, and even adjusted "Controller Assignment" parameters by switching 'pan pots' on O2R96 and 'faders' on O2R96 to control 'volume faders' and 'pan contols', respectively, within Logic. Seems that this glitch still occurs while using the O2R96's pan pots to control volume fades within Logic.
    Anyone at Apple that can help? Is it an error in the code you guy's have written?

  • Major files missing in Logic Pro X

    Whilst making a track I decided to save my work before playing what I had created; but when it came to playing it there was no sound. I chose to quit the program and open the application again when it asked me to search for missing files, it did this for every audio file on the programme. When I loaded up my project again there was still no sound being produced. I went to check why no sound was being produced and it turns out that all of my instruments,  synthesisers,  samples, mp3 files, etc had gone missing. I have no idea where these files are right now as I can't find them in finder. Any help to locate these files and restore my projects / logic pro x would be much appreciated.
    (I checked whether I had to install the sounds again but it says that I have already installed them)
    Thanks : )

    Hi Erik!
    Is it me or has there recently been a sudden increase in this sort of problem (Where some people are finding that Core Audio deselects itself for some reason)?
    Any idea of what might be causing this as I'm not seeing such behavior here.... and Im having a heck of a time trying to recreate it?
    Cheers..
    Nigel

  • EXS File missing in Logic Pro 9: Unisyncl.wav and Unisynch.wav

    Hi to everybody!
    I just installed logic pro 9 and this is my first experience with logic.
    Using it I noticed that some files are missing. These files are: Unisyncl.wav and Unisynch.wav.
    Searching the internet I discovered that those files belong to logic 8 and are located in the folder:
    /Library/Application Support/Logic/EXS Factory Samples/05 Synthesizers/04 Sequence Elements/Spectrum Stack 01/UniSyncH.wav
    /Library/Application Support/Logic/EXS Factory Samples/Analog Samples/Spectrum SQ/UniSyncH.wav
    Please someone can send me them by mail or internet hosting service?
    My mail is: [email protected]
    Really thanks to all

    Yes, I have them - both samples are in both folders:-
    /Library/Application Support/Logic/EXS Factory Samples/05 Synthesizers/04 Sequence Elements/Spectrum Stack 01/UniSyncH.wav
    and
    /Library/Application Support/Logic/EXS Factory Samples/Analog Samples/Spectrum SQ/UniSyncH.wav
    These are on the LP8 content disks but not on the LP9 content disks, strangely enough.
    These will be only up for a short time as technically it's Apple content. I'm doing this to help you out as you're probably more than a little frustrated. Please post back when you have downloaded them.
    http://dl.dropbox.com/u/4211158/soundies/logic/UniSyncH.wav
    http://dl.dropbox.com/u/4211158/soundies/logic/UniSyncL.wav

  • Help me find my Garageband Insturments Missing in Logic Pro

    I recently moved my Garageband instruments to a different hard drive.
    Now when I try to open them in Logic Pro, the default instrument loads but when I try to load other patch, I get a message saying "Missing: (whatever instrument I try to load)" .
    I suspect this has something to do with the directory path in the preference file the for Logic Pro.
    I know how to open the preference file but I don't know how to edit it and what to edit.
    Can anyone help ?
    Also is another way to fix the problem ?
    Thanks
    Greg

    Sorry for the sample post

  • Control Panel Missing in Illustrator CS6

    so this is something ive never really encountered before. im starting up illustrator, and the control panel (at the top) is missing. I tried restoring the essentials layout, restarting the program, and restarting the computer to no avail. the screen resolution is at the highest setting, and the control window is checked, so i have no idea what it is. any help is much appreciated.

    and now, i restarted in like a 5th time and its back. has anyone else encountered this bug before?

  • HT1846 I can't locate the Quick Time 7 control panel to input my Pro code

    I have Windows Vista and downloaded Quick Time 7. I just bought the Pro registration code to upgrad to Quick Time 7 Pro. Apple explained to go into my Vista OS control panel to access the Quick Time control panel to plug in the purchased code, but its not there. I see icloud in there , no Quick Time. I checked out the other locations where Quick Time files are but still can't locate it. Been at this for a couple hours. Can anybody help?

    Whenever I log into icloud.com
    Using what version of which browser?
    iCloud.com requires Safari 6 or later, Firefox 22 or later, or Google Chrome 28 or later. Have you tried all of those?
    If you have, have you tried clearing your browser cache and cookies?
    For the first tine since 1989 I'm thinking about buying a PC.
    You'd have exactly the same problems on an 8 year old PC too. It's a bit unreasonable to expect such an old Mac to continue to be compatible as software is constantly updated.
    Saying that, I'm still able to access iCloud.com successfully in Safari v5.0.6 on a PowerPC Mac running Mac OS X 10.5.8, so the problem you're having is likely to be a browser issue, not something inherently wrong with the computer.
    Since all this crap started, Mail won't download my Mac.com or me.com email.
    The iCloud.com website is totally unconnected to Mail's ability to download email via IMAP. Have you checked the mail server settings are correctly setup and up-to-date?

  • My nvidia control panel dissapeared from mac pro

    My nvidia control panel dissapeared from early 2008 mac pro running 10.6.7 osx snow leopard with a NVIDIA GeForce 8800 GT graphics card.I have tried reinstalling the driver from the nvidia website,time machine,and software updates.Nothing seems to bring it back. Solutions anyone?

    Hi Jack,
    Yes the GT120 will work with the DVI port but the mini-displayport will not function on the card so you'll be limited to using one display. The handy thing with adding a GT120 to a 2008 Xserve is you can use it for compressor if you want to, to render videos.
    Best
    Beatle

  • Computer crashing and nvidia control panel missing options

    Hey, I bought 2x msi gtx 970 and put them in sli mode. They worked fine for a while but yesterday I started having problems. I was playing shadow of mordor and suddenly my screen went black and my computer restarted. It worked fine afterwards tho. Then today I played some LoL and after playing for like 15 minutes or so it happened again. But now also after the computer restarted my nvidia control panel was missing options. There were only setup g-sync, set up stereostopic 3d and view rating for games. I'm not sure if this happened yesterday too. I tried reinstalling the drivers (tho I'm not 100% sure I did a perfectly clean install) and the options came back but the crash happened again and the options disappeared also again. I have 850w corsair tx850 so I think that should be enough power? My mobo is asus P8Z77V-Deluxe and cpu intel i7 3770k @ 4.3ghz. So what is the problem?
    EDIT: after I restarted my computer again the options in the control panel reappeared
    EDIT2: I ran furmark with both sli on and sli off for about 50 minutes and oddly enough my computer didn't crash. Everything ran well. Here's some statistics from sli: GPU1: 1316MHz @ 99% load, temp 80 C, voltage 1.193V, GPU2: started at 1303MHz and then dropped to 1277MHz @ 97% load, temp 62 C, voltage 1.206V. Another weird thing is that the crashes in lol kept happening even after this and always around 15-20 mins to the game. I would say it's an issue with lol but it happened once with shadow of mordor too. I haven't played any other games. Also it's weird that this started happening only recently, not from the beginning. I do recall downloading some update to geforce experience recently, don't know if that matters.
    Also I'd like to know that are those temperatures normal for air cooling in sli and/or are they too high?
    EDIT3: Just noticed that everytime I try to run pci-express render test on gpu-z my computer crashes instantly and apparently trying to run furmark now also crashes the computer

    Quote from: Nichrome on 16-October-14, 00:56:09
    Hello,
    Could you please be more accurate on your spec: >>Posting Guide<<  RAM, frequencies, timings and so on.
    Would be worth trying bit more powerful PSU. Not saying this one is insufficient, but it's always best to rule something out for 100% sure.
    Remove OC from the CPU and RAM (RAM to be 1333MHz and CPU to run stock). Or try >>Clear CMOS Guide<<
    Make sure that you're running latest BIOS for the motherboard <Contact ASUS about it>
    Temps are completely fine for SLI on air. Top card always is much hotter than the other. However you could reapply thermal paste on both cards, run single card for 1h and record its temps, then do the same for the 2nd card (in single card mode so the other is out of the PC) and use the cooler one on top.
    I feel so dumb right now. Seems like one power cord from the psu to my gpu wasn't properly attached and now that it's completely connected everything seems to work. I'll update this thread if that didn't fix the problem. But anyways thanks for your fast response

  • HELP!  Control Panel missing and booting problems

    For some reason I cannot access the control panel where all the icons for networking, hardware and so and so on normally are to be found.
    It is not present as an icon on the dock and does not appear when in the "apple" menu I click the german translated name of it"Systemeinstellungen". Am I forced to install again the whole Leopard !!! or is it htere a way to get the panel back?
    I have also general problems. Often I am forced to start twice the Mac since it remains the first time in the booting process with the multicolour round wheel spinning endlessly.
    Thanks in advance ;-))

    Given your collection of problems reinstalling seems a good idea:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Plugins shown missing in Logic pro x when they are there ....Plz help

    I installed Melodyne when I just had Garageband....it worked
    when I installed Logic pro 9 ....Melodyne stopped loading, I installed vanguard at this stage
    When I installed Logic pro X .....error for both Melodyne and Vanguard was --> plugins not on your computer...now both melodyne and vanguard are missing plugins according to Logic pro x but it can't be as both these softwares work in Garageband or Logic pro 9...plz help .....

    Additional Info:
    As there is a common misunderstanding about VST plugins.....
    JBridgeM... which is the Mac version of JBridge.... is only for converting Mac 32 bit VST plugins to Mac 64bit VST plugins.. so they can be used in a 64bit Mac DAW that uses VST plugins.. An example would be Live 9 64bit for Mac
    It does not convert Windows/PC VST plugins... so you can use them on a Mac running OS X.....
    JBridge for Windows... only converts Windows 32bit VST plugins for use in Windows 64bit DAWs.... and so again this will not work on Macs running OS X
    ...and to answer your question about older projects that used Vanguard and 32 Lives.... Yes, it would work automatically... when you load one of those older projects

  • 3rd party plugins are missing in logic pro x

    only a quarter of my plugins are showing up in logic pro x any idea why & how i can get them 2 show up? cause they all work in logic express 9 except for a few that stopped working since i installed maverick osx. any help to point me in the right direction would be greatly appreciated.

    It's not because they are outdated 32-bit AudioUnits and Logic Pro X is a 64-bit application?

  • Y40-80 SynapticsTouchpad Control Panel Missing Features

    When I purchased my Lenovo Y40-80, I was very happy to know that it had a Synaptics Clickpad. I have had great experiences with their trackpads in the past, as their many customization options allow me to make it work just the way I like it. After first using the laptop, however, I was dissapointed to find that the Synaptics Control Panel is a much more minimalistic version than the one I have used in the past, and options such as "Momentum" and the various corner button options are not available. (I know how to enable certain things, such as "Momentum" through the registry, but settings forthe various gestures are beyond my knowledge, and it would be much easier to have a more capable settings menu.)
    Is there any way to get the more traditional Synaptics Control Panel application?
    Thanks,John

    Quote from: Nichrome on 16-October-14, 00:56:09
    Hello,
    Could you please be more accurate on your spec: >>Posting Guide<<  RAM, frequencies, timings and so on.
    Would be worth trying bit more powerful PSU. Not saying this one is insufficient, but it's always best to rule something out for 100% sure.
    Remove OC from the CPU and RAM (RAM to be 1333MHz and CPU to run stock). Or try >>Clear CMOS Guide<<
    Make sure that you're running latest BIOS for the motherboard <Contact ASUS about it>
    Temps are completely fine for SLI on air. Top card always is much hotter than the other. However you could reapply thermal paste on both cards, run single card for 1h and record its temps, then do the same for the 2nd card (in single card mode so the other is out of the PC) and use the cooler one on top.
    I feel so dumb right now. Seems like one power cord from the psu to my gpu wasn't properly attached and now that it's completely connected everything seems to work. I'll update this thread if that didn't fix the problem. But anyways thanks for your fast response

  • East West plugins missing in Logic Pro

    I have been to East Wests site to get the mac installer for EWQL Gold. I installed it making sure to install the AU. I opened the stand alone version which works no problem. Then Iopened Logic Pro 8 and the EWQL Gold is not there. All my other Plugins are showing up.

    Since they are still working on their new long delayed stormdrum and piano libraries, I suspect it could still be months before they release the PLAY version of EWQLSO.
    While EW doesn't develop the kompakt player, it is their fault that over two years after the first intel boxes shipped, they are selling software that isn't intel compatible. And they weren't forced to develop their own plugin, they had the option of converting their libraries to a newer version of kompakt/kontakt months ago but decided against it.
    Their libraries are good, but I strongly disagree that their support is "spot on". They have been promising intel support for a year and a half, and have yet to deliver. Their latest libraries (with the new plugin) still have a number of bugs months after release. And everything they have released in the past year has been months late, including their last two new PLAY libraries, which were supposed to ship I think April, and still aren't out.
    And don't even get me started on the way they run their company. They have made MANY promises to customers about support and compatibility in order to sell libraries, and then not only gone back on those promises, but flat out lied and denied that info was ever on their website. If people think the censorship on this board is bad, EW not only deletes any post pointing out promises made and not kept, and bans the user account.
    Some nice libraries, but the way they run the company and treat customers makes me unlikely to ever buy anything from them again. It's a shame they don't just release libraries for EXS, or other open player formats and not have to worry about the nightmare of plugin compatibility.

Maybe you are looking for