Apogee Duet no headphone out with Wave Burner

I dont seem to get any sound out of the headphone out on my Apogee Duet USB interface when using Wave Burner.Everything on it works fine with Logic.Something to do with the outputs I'm sure.Any tips on this would help.Thanks.

Have you checked <Preferences> <Audio Driver> in Waveburner? The Duet should appear there, assuming it also has priority in Audio MIDI Setup output configuration.
Regards

Similar Messages

Problem with Wave Burner

Hi
I'm having a problem with Wave Burner hanging when I try to play audio files. The last time I used it, several months ago, all was well but now after importing my audio files and pressing play the program hangs up and can only be closed with force quit. This also happens opening saved files which played previously. Logic and Pro-tools are still working fine. No problems there.
Im using a digi003 with Core Audio. Logic 8.02 OS version 10.5.8. I mac 2.66 dual.
Any help would be appreciated. Thanks!!

I thought I'd try this again
In Wave Burner if I select the internal audio as playback it works. It's only when I select the Digi003 as playback that it hangs. It used to playback through the 003 fine.
Anyone?
Thanks!

GB vs. Pro Tools With Mbox or Apogee Duet 2 and Neumann TLM 102

Any guidance on this is greatly appreciated....I am VO artists really being forced into home recording. Can not do a USB Mic into the MBP as the sound is not professional enough. But I do use GB. Based on that, and the fact I only record my voice, I have a series of questions
First question: I'm thinking of getting Apogee Duet 2 as opposed to an Mbox. Any opinion? The Mbox comes with Pro Tools
Second question: Is Pro Tools better software than GB? Remember this is for voice-over work.
Third question: Has anyone out there used either the Apogee Duet 2 or Mbox with a Neumann TLM 102 mic? Do you hear a difference between Apogee Duet 2 and Mbox with the Neumann?
Forth question: If you were in my shoes, and just wanted a super duper VO sound, should I be looking at something other than mBox and Apogee?
Again, to be clear: I'm not recording instruments, so I don't need a lot of bells and whistles...just great, and I mean great sound quality...
Thanks so much
Oh....real important...running OS 10.7.4 if that affects the above... I alos know 10.7.4 is getting upgraded ( spoke to Apple) because of the QT Pro 7 problems, amongst others

Go with the Duet 2, no question. You'll hear the difference...
Pro Tools and GarageBand are both great apps, its really a question of what your'e trying to do with it. Unless there's anything you're trying to do but can't do in GarageBand, there's no real advantage to Pro Tools for what you're doing.
Apogee has always been a "no bells and whistles" company - it simply works and sounds great.
Hope this helps!

Apogee duet - no sound - mac mini server OSX 10.9

Hi
all posts relating to my query are very old so I pray someone can help with an updated solution.
I purachsed an Apogee DUET FIREWIRE to work with ABLETON LIVE 9 on my MAC MINI 2011 i7 16gb runing OSX 10.9.5 (ok - so i can see alreday that I am not on YOSEMITE - but the APOGEE driver application states its for 10.9 and 10.10). It second hand
Dowloaded the nec software from Apogee site, plugged in, Duet recognisedstraight away....then NOTHING !
No output. changed system settings accordingly. NOTHING. when I click on the drop down in ABLETON it HANGS for ages. Then after its selected, the track doesnt play....
So It tried ITUNES. Same. after clicking play NOTHING happens - track status bar does not move. When I re-select the mac output (through my stereo / headphone socket) I can hear itunes / Ableton perfectly.
I am sensing this is a driver issue.? I wont lie to you - Im a NEWBIE to MACs. Converted this Xmas - but I seem to have picked up a well stocked MINI MAC - but is a there a school boy error here I am missing?
BTW - just to be safe Ive ordered a new 400-88 firewire cable just in case...as apogee came with a 800, 9 pin to 9pin cable, so I am using an adaptor (which again may be the probem - even though its high quality),...new cable will arrive tomorrow.
MANY THANKS - NICE TO FINALLY GET A MAC !!
Jof

I think you're trying too hard...
I have zero tech or network expertise, but my Mac mini server intalled without a hitch on my home network of three other Mac desktops (Ethernet from AEBS), a MacBook, and a PC laptop, both via the AEBS wireless. The AEBS is connected to a cable modem.
I also have a static IP for my AEBS.
If you hook up your server, computers, and AEBS first and then reinstall Mac OSX Server, the server set-up will configure your network for you. You shouldn't have to set your own IPs at all...
I'm no genius at this stuff and I'm mostly playing around and experimenting, but we use file sharing, a common calendar, a family Wiki, centralized backup, and also run iTunes continuously to serve an Apple TV.
Let Apple do the work for you. See if the defaults work before tweaking it. It worked out of the box for me... Good luck.
Charlie

Headphone Out coming out as mono?

I'm using my Macbook Pro i7 headphone out with a stereo cable 3.5mm on one end from the Mac and it splits into two into another computer's
audo interface L & R.
So when Im recording the Mac output in analog into the L&R of another PC, the sound across the speakers seems dull and Mono?
But when I play back what I've just recorded its in full stereo ?
How can i get the Mac to play out "in stereo" - I don't think i've had this before?

anyone?
Macbook Pro (core 2 duo, 2.33ghz) Mac OS X (10.4.8)

How to Connect the Apogee Duet with Digitech Vocalizer 3

I have been trying to figure out how to interface my guitar and microphone with the Apogee Duet 2 using the Digitech Vocalizer 3 (voice correction). I would like someone from Apple to verify what I have found, but this is how I finally got it to work:
1. Connect you microphone directly to the Vocalizer as shown in the instructions. If you are using a condenser mic, remember to activate the 48v power on the back of the Vocalizer.
2. Set the Vocalizer output to mono (on back of device), and connect one cable from either output port of the Vocalizer to the Input 2 of the Apogee Duet.
3. Use a 1/4" splitter (one mail 1/4" that splits into 2 female 1/4") to attach two standard 1/4" guitar amp cables to the output of your guitar. Connect one of these to the "Guitar In" port on the back panel of the Vocalizer. Connect the other to Input 1 of the Apogee Duet.
4. Open the Apogee Maestro Software, and select "Input". You should see both devices listed (1 and 2). The Apogee will not recognize the Vocalizer as a microphone, so set both of these devices to "Inst".
5. Open Garage Band and add both instruments.
6. When you add your guitar, remember to set your Input Source to "Mono 1" and turn the Monitor On so you can hear it through your hed phones. Also, make sure you have the headphone Icon selected on the Instrument panel.
6. When you add you Vocalizer (Instrument 2), select "Vocals" and "no effects". Remember to set your input source to "Mono 2" and turn your Monitor On so you can hear it through your hed phones. Also, make sure you have the headphone Icon selected on the Instrument panel.
7. If you want to hear and record both instrumental tracks, go the "Track" menu and select "Enable Multi-Track Recordning."
In summary, the Apogee Duet does not appear to recognize the Vocalizer as a microphone, so you have to set up the connection from the Vocalizer to the Duet as another instrument.

#3 Can't you just plug your guitar into the Vocalizer's guitar in jack and then use the guitar thru jack to the apogee?

FW problem with Apogee Duet, Yamaha monitors, and external FW800 HD...

Recently purchased an Apogee Duet and Logic Express 8. Love it so far but there's a cracking noise coming out of the Yamaha monitors when I turn on the external HD via FW800. The Duet is connected via FW400.
It'll be nice to solve this issue. The digital/cracking noise is annoying. It's almost unworkable. Additionally, I use the external FW800 as my recording drive so it's crucial. I guess the FW bus is overloaded. Is an express/34 card the only option? If so, any recommendations.
Besides this, the Duet sounds awesome w/out the FW800 HD plugged in.
Thanks, mT.

I'm having the same issue -- lots of crackly digital noise coming through my studio monitors (but not through the headphones). The noise, I find, is particularly loud when the 48v is on. Is that the case with you? I initially discovered the issue while trying to record with an AKG C 451 B condenser. When the mic was getting phantom via the Duet, I was getting digital crackling. However, when I put a preamp between the condenser and the Duet (in this case a UA Solo/610) and had the preamp supply the 48v, the crackling was gone. So: is this an issue with the FW or an issue with the Duet's phantom power?
(I'm using the Duet with Logic Pro 8)

I just purchased Duet 2 and am using it with Garageband 11. I am getting iTunes playbacks through the headphone monitors with Duet 2 but can get no guitar or vocals recorded. I get no volume

I just purchased Apogee Duet 2 and am using it with Garageband 11. I am getting iTunes playbacks through the headphone monitors as per quick startup directions. When I open Garageband I get the same identical stack of guitar and on pedal displayed. I get no sound from the guitar. I believe I have the set up exactly as per diagram and cannot figure things out. I am relatively green at this - my best intentioned purchase now feels like a nightmare!! Help!!

Yes, you can upgrade to Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required.

After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet

after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.

To those with APOGEE DUET. Why not use S/PDIF?

I am interested in the best quality recording. My mac pro has S/PDIF which I thought would be ok to use. Is the Apogee Duet better? And why? Or is the S/PDIF as good?
I always thought people got the apogee, because they didn't have any good audio connection like s/pdif

Perplex1 wrote:
I have a korg m3 in which i want to record to my computer. Currently i have the korg's spdif out to my macpro's spdif in. I want to know if it would be better quality to record with an apogee duet.
If you're only going to record the Korg, then s/pdif should be fine.
However, if you want to record anything without a digital output (voice, guitars, sleigh bells...etc) you would need to have a front end mixer with digital output otehrwise you would end up using the Mac's analog in which is cr@ppy by any standard. Here is where the Duet comes in, the Mic preamps on the Duet are high end, to purchase a Mixer with a set of mic preamps as good as the Duet's would set you back far more than the cost of the duet, plus the Duet has high impedance inputs for guitar/bass.
Audio interfaces, including the Duet have their purpose, otherwise 90% of the people in this forum wouldn't laying out money for them.
pancenter-

How do i connect a pod with an apogee duet into logic

I am running a line 6 pod 2.0 and am new to logic. I was wondering if someone could walk me through connecting it to a apogee duet and record into logic thanks

I have an Ensemble and a X3 Live but I imagine it's similar. I run two lines from the pod into the Apogee device. Then set up two audio tracks, one with Input 1 and the other with Input 2. Arm the tracks to record and you should be set. (You can also do it with a single track, just using one line out.)

HT200117 Why my Apogee product (DUET) isn't compatible with Mac OS X Mavericks (10.9.1)?

I have just bought an iMac (Processor 3.5 GHz intel Core i7) with OS X 10.9.1 and installed Logic Pro X for enhancing my home studio potential but it doesn't work with both Apogee Duet and Zoom R16 so now I cannot record any real instrument now!
I have already tried to install the most updated driver for the DUET FireWire without success.
I have also tried to contact Zoom Japan customer service but haven't got any feedback yet.
Does anybody know how to sort those issues out?
Thanks
ciao Mauro

Hi Mike,
Yes, you are right, I have the older DUET version using Firewire, so I've tried to sort this issue out using an Apple Thurnderbolt/Firewire adapter.
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
Is your Duet working well with both OS X 10.9.1 and Logic?
I have updated the driver (http://www.apogeedigital.com/drivers/DUET/Duet_OSX10.9.dmg) but still Duet is not working with both Logic Pro X and Logic.
Thanks
Ciao
Mauro

Apogee duet problems with mavericks fixed?

Any person worked out the problems with Mavericks and midi issues??? I have an Apogee Duet for Mac/IOS

Nope. To put it bluntly Apple really screwed this up. The opperating system has created serious headaches for musicians and it doen't look like it's going to be fixed anything time soon.

When I burn dvd in iPhoto, it comes out with original photo plus separate close up photos of each face in original photo. How do I get it to stop doing that?

When I burn dvd in iPhoto, it comes out with original photo plus separate close up photos of each face in original photo. How do I get it to stop doing that?

I am reading this post in the iphoto for iOS forum. The iPad does not burn photos to a DVD. Perhaps you'll get some assistance if you posted in th general iPhoto forum.

HT204266 is wave burner included with the download of Logic Studio from the app store?

is wave burner included with the download of Logic Studio from the app store?

Hi HandletheTruth.
I will be able to assist you.
The MF Toolbox 4.9 software supports scanning in the document using OCR processing; however, you will need a separate OCR software that will allow you to edit the software.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Apogee Duet no headphone out with Wave Burner

Similar Messages

Maybe you are looking for