Apogee Duet Not Showing up in System Preferences, device is getting power.

I've got a newer Mac Book Pro with only the Firewire 800 port. I've hooked up my Apogee duet through an 800/400 Firewire cable. The Duet has power but is not showing up as an audio interface option in my system preferences. I've downloaded the latest software from Apogee and installed it, then restarted but nothing's working right now. I'd greatly appreciate and help or suggestions.
Thanks

I have the same MBP. All new. Have just received notice rom Apogee that my machine lacked an audio driver.
On their recommendation I updated the OS to 10.6.2. and vioila!
Frode

Similar Messages

  • Why does Windows 7 not show up in System Preference's "Startup Disk"

    Why does Windows 7, installed via Boot Camp, show up when you hold down the option key when booting but the drive does not show up in System Preferences under the Startup Disk icon.
    As an aside Windows 7 runs perfectly on my MacBook.
    - Mike

    Now I found I'm not alone. My situation is similar but not exactly the same.
    I recently switched from the white MacBook to latest mac mini, tried installing XP Pro not successful for some reasons then tried Win7 (build 7000). On my old macbook this worked perfectly.
    Got win7 updated and picked win7 as startup disk in windows, used that for few days without going back to leopard. On just one occasion I booted with 'alt' key pressed (using a PC keyboard) I have choices of drives so I thought everything was fine. As soon as I booted into leopard I found no win7 partition in system>preference>startup disk, OMG I couldn't boot back to win7 since then. From that point onwards the 'alt' key didn't work for me. Every time only leopard can be booted.
    What can I do now?
    Why it was OK in macbook but didn't work on mini? Is it worth investing on a mac external keyboard just to get the 'option' key?

  • Wallpaper images not showing up in system preferences

    hi. my wallpaper images aren't showing up in system preferences/desktop. the folders are there (apple/nature/black and white/etc.) but there are no images in them. the image files are in my library, but i can't figure out how to get them back into system preferences. can anyone help?
    thanks so much.

    that brings up a finder window, and i can get to the folder that way, but the images used to be in the folders in system preferences, and i can't get them back in there. the folders are there, but empty. the files are in the library but i can't move them. help!

  • MacBook Pro 6,2 Existing scanners do not show up in System Preferences

    I have a MacBook Pro 6,2 and I just installed OS X Yosemite. While attached to my home network (wired), neither of my scanners show up when I try to add them in System Preferences. Also, they do not show up in the Hardware list in a System Information report. One is an Epson V600 and the other is an HP ScanJet 5590. Both of them work just fine on my MacPro 4,1 running OS X 10.8.5, although, oddly, the HP doesn't seem to have a scanner queue even though it works just as it should (scanning with Acrobat Pro).
    Why are these devices absent from the "add printer or scanner" list and how do I force my MacBook Pro to see them?

    Welcome to the forum.
    How did you name your comps and your AE project(s)?  If you used numbers at the beginning or the end, that may be interfering with AE's Increment and Save feature.  Try renaming your comps and projects without using numbers.
    -Jeff

  • Icloud is not showing up in system preferences on my imac

    I am working on OSX 10.68 and I have just purchased icloud. For some reason, it isn't showing up in my system preferences. Anyone?

    iCloud is not supported using 10.6.8, you must upgrade your version of OSX to (minimum of 10.7.2), upgrading to the current version (if your Mac will support it) is preferable (10.8.3)
    iCloud is a free service, how did you manage to pay for it?

  • Ort Express- my network suddenly not showing up. System preferences, advanced/network shows network. Opened Airport Utility options grayed out except configure other but no luck. No set up assistant option to reenter.  Not sure where to go from here?.

    Airport Express.
    My network suddenly not showing up.  Openend system preferences/Network & my network is there. When I open Airport Utility, most option are grayed out except "configure other" with no change.  Utility does not provide option for setup assistant where I could just start over.  So no wifi without network set up and can't use ethernet/router to troubleshoot.  I am stuck any assistance helpful.

    So I went back to the PC after my original post, and somehow I was able to connect to the AirPort wireless network in the Windows Wireless Network List. Once I did this, it showed up in the AirPort Utility, and I was able to access the internet. I have no idea what fixed the problem, but maybe it was simply a matter of waiting a few minutes before connecting to the network?

  • I just bought a trackpad and the Icon does not show up in system preferences

    I just bought a magic trackpad and went to install it on my computer.  When I go into system preferences it does not have the trackpad icon to select.  My computer is a IMac 9,1 Intel Core 2 Duo

    Support started for the Magic Trackpad in Snow Leopard 10.6.4.   If you're still on Leopard as your profile indicates, it's to old to use the trackpad.

  • ICloud Not Showing Up In System Preferences... Is it cause I'm not running OS Lion?

    I am not provided the iCloud option in my System Preferences.
    Is this because I'm not running OS Lion?
    Or...?

    Exactly so. 10.7.2 is required for Lion. Snow Leopard cannot connect to it; you can enter the mail server settings manually in Mail and there is an unsupported hack which allows you to sync calendars and which may or may not be reliable: and of course you can access your data online at icloud.com, but not sync it to your Mac.

  • Check bubble not showing up in system preferences and safari

    Ever since I have upgraded to Snow Leopard on my new macbook pro I cannot see the check bubble that should be on some websites and in finder such as this example in system preferences:
    http://img8.imageshack.us/i/screenshot20091109at554.png/
    there should be two bubbles next to each power option, the bubbles look like this:
    http://img121.imageshack.us/i/screenshot20091109at555.png/
    When I use firefox everything is fine, but is there a way to get it to work throughout my computer?, thanks.

    I don't know what you think is missing. The screen shot you posted looks fine except for the buttons on the toolbar. If you still think that there is something missing, then I would guess it has to do with whatever you used to change the buttons in the toolbar.
    Edit: I don't have the options at the top; is that where you should see something? Regardless, I go back to blaming whatever you've loaded that is affecting the buttons.
    Message was edited by: Barney-15E

  • I am trying to set up icoud on my macbook pro. But, Icloud is not shown on my System Preferences?

    Hi,
    icloud does not show in my System Preferences on my macbook. I am rying to set it up. Where else should I be looking?

    What OS are you running? You need to have 10.7 Lion for the basic iCloud or 10.8 Mountain Lion for the full iCloud. While 10.7.5 will allow you to access iCloud you will be limited unless you can upgrade to 10.8 Mountain Lion.
    This is from Apple Support:
    Minimum operating system requirements
    You may also use iCloud with the following operating system versions:
    Mac
    OS X Lion v10.7.5 or later*
    * Note: Although you can use OS X Lion as noted above, you will not
    be able to take advantage of some iCloud features, such as Shared Photo Streams, iCloud Tabs, Find My iPhone Lost Mode, Documents in the Cloud for iWork, and Find My Friends location-based alerts.

  • Account doesn't show up in system preferences

    In an attempt to override my master password, I started my computer in single user mode, typed /sh/mount -uw / and passwd, and then entered a new password. However, this created a new account called System Administrator on my computer that shows up in the login menu as "Other…". I want to delete this account, but when I log in to my usual account, the System Administrator account doesn't show up in System Preferences. Can anyone tell me how to delete this account?
    (Btw, any tips on how to find out what the password is for the root user would be helpful. From my normal account, the new password I entered doesn't work for root, although it does in the System Administrator account.)
    Thank you!

    Hoping that we are on the same page., but sounds like what you did was enable the root user.
    Its a user that will not be seen in system preferences and should never be gotten rid of (its great for troubleshooting).
    The root user or (system administrator) is different from a User account with Administrator access.
    Browse
    http://support.apple.com/kb/HT1528

  • Printer shows up in System Preferences, Says Ready, but nothing prints

    Hi, I migrated successfully last week from a G5 to a MacPro. My printer was working up until yesterday. It is an epson stylus photo 1400, connected by usb. I downloaded a new driver from Epson, but still can't make it work. Have run Tech Tool Pro, reloaded software several times. Printer shows up in system preferences window, and when I go to print it appears to be working, but then disappears from the list and never prints. Have been checking posts, but not finding an answer. Please help if you can. Thanks, S

    Not knowing how you mucked things up when you locked yourself out or what you used with BatChnod, resolving things can be an issue. Check See Niel's guide. and ensure you've done things correctly. If resetting things appropriately doesn't do the trick, reinstall Snow Leopard, run Software Update, repair permissions, and restart.

  • Apple USB Modem not seen in Network System Preference

    I am trying to set up my father's Mac Mini to send and receive faxes using the Apple USB Modem. The base problem I am having is that the Mini does not even show the device. It is not in the Network System Preference, or even in the "About this Mac" system information. I don't know if the dongle is even working.
    In the "Print and Fax" area of the System Preferences, I have no luck either. When I hit the add button ( + ) to add a device, the "fax" button at the top only shows the word "Bluetooth" and it is listed as a Fax. Any suggestions would be wonderful.

    Gee,
    You've gotten no response for over two weeks, I see. So, maybe you're resolved your issue.
    If not, I'll just say that I have an Apple USB modem on my 2009 Mini, though I connect to the Internet via WiFi most of the time, and the modem has been pretty effortless to use. It's recognized in Network Preferences, even when not in use.
    Maybe your issue is electro-mechanical, i.e., is it wrongly plugged into the Ethernet port?
    Or, is your USB modem plugged directly into your Mini, instead of a powered or un-powered USB hub?
    Anyway, please let us all hear if you've resolved your issue and what it was.
    Peace to you,
    C. Livingstone

  • How do I get the Airplay Icon to show on the System Preferences of my MacBook Pro?

    How do I get the Airplay Icon to show on the System Preferences of my MacBook Pro? I want to be able to connect to my AppleTV.

    I looked at that already. I've done everything it says: check to make sure wireless is working, make sure airplay is enabled, make sure device and apple tv are on the same network blah blah. The icon just isn't there. Unless I skipped a step. AirPlay works when I use it in the music app and in the video app, I jus can't get mirroring to work. I was looking at some other threads and mirroring doesn't seem to be working for a lot of people. Maybe I jus have to wait for an update =\

  • In solution manager system not showing all the system in SLD

    Dear Gurus,
    During the installation of solution manger sysyem i selected as a Central SLD as solution manager
    Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
    If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
    It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
    But if i login into solution manger not  able to see all the system in SLD.
    Regards

    Thanks for reply
    it is not showing all the systems

Maybe you are looking for