APOKZ blank but ECC-SCM integration works OK!

Hi Gurus,
I am surprised by this system behaviour in ECC 6 & SCM 7.02 where in I just deleted all models and created/ generated new models, activated them and did the consistency check after activation...all was good.
Out of curiosity, I checked the APOKZ field in MARC, to my surprise all materials had blank. Executed the RAPOKZFX report which came back with Error: APOKZ not set for material/ plant.
Tested my GATP scenarios by creating sales order, executing GATP check, then checked the result both in ECC & SCM was all good. Plant substitution had happened and GATP check on available stocks was done. Sales order was in SCM.
Questions: Why is 3 not set on APOKZ although my material & site combinations seem to be in an active model? and why does RAPOKZFX return with error when I try to set APOKZ indicator.
Small observation: After generating Material, ATP, Stock models (before activating them), during each of these steps consistency check had failed with warnings like material master and plant not in model. Although, after activating each of these the consistency check returned with no errors.
Just FYI - followed the following sequence still the same result:
RAPOKZFX - Program for Adjusting Field MARC-APOKZ With Integration Models
RCFUPDCR - Reorganization of superfluous CIF update counters
RCFORDCH - Check for Inconsistencies in Table CIFORDMAP
RCIFIMAX - Generate and reconcile the runtime version of active models
RCIFIMDL - Deletion of superfluous filter object keys in CIF_IM* tables
RCIFMTDE - Program for Maintaining the Materials Deactivated in CIF
RDELALOG - Delete Application Log Entries

Hi Anil,
Thanks for your response but I wasn't in change mode for sure. Will get back to you after deleting all products and generating the IM again.
It's a new IS Retail implementation & so far we haven't added any material master enhancements as far as CIF or IM's are concerned hence I am hoping that IM's should work on all materials in the selection criteria irrespective of the values in their MARC fields?
To put it in another way, are there any "key" material master fields in standard that either switch ON or switch OFF the material from the IM?

Similar Messages

My iphone 4s screen has gone blank but the phone still works

My iphone 4s screen has gone blank but the phone still works

Hello antspeaks,
It sounds as though screen curtain has been enabled on your iPhone. This can be disabled by tapping three times with three fingers on your iPhone's screen.
Turn the screen curtain on or off. Triple-tap with three fingers. When the screen curtain is on, the screen contents are active even though the display is turned off.
iPhone User Guide - Use iPhone with VoiceOver
http://help.apple.com/iphone/7/
Cheers,
Allen

My Itunes store is blank but my itunes is working

I've only noticed this just this past week. My itunes is working perfectly but whenever I go to the store, it goes blank. Sometimes it will load and you can see the website then when the bar hits the end (finishing loading) it goes blank again.
Can someone help please?

My itunes has been doing the same thing for the past week 1/2. My sister has been using my apple id and password to get onto the store on her ipod touch, but i didnt know if that had anything to do with it because shes been doing that for about a month now. but yes mine loads and the store flashes on and then goes off. my computer connection is just fine. Itunes help people say its probably internet or computer connection, but ive checked all of that and its fine!
Someone HELP!

HT5622 The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings no

The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings nothing!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Game Center and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Safari opens, but its blank. only when google website works.

After a virus that created pop up ads, I removed the virus but my web broswers dont work and websites become blank and dont work. My safari is ruined and I cant download anything. Which means I cant browse anything since my chrome browser was deleted. Here is an example of my problem Its blank! Only google would work but if I click on a website it is blank like this! Any ideas on how to fix this?

I did use your adware removal script but for some reason, after that, I couldnt search anything, Safari was broken and the only 2 sites I can go on is google and sometimes youtube. I am talking to you by using a private browser from the app store and I cant download anything on it. When I use the script, there is nothing to remove my trash is clear and there is no problem. But what I did notice during my problem is that chrome is broken to. When I open it in the search box it says conduit and then random letters or something. Here is an exampleCant seem to find the source of my problem.

Hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. any one like me?

hi my name is Aditya. i am using ipad 2. 2 days ago my ipad fall down from my hand and now its screen is not working it is totally blank but shocking thing is that when i take a screen shot the display came back for 2-3 second. dose ne 1 have same problem....?

Anyone have any suggestions? or is everyone else just as clueless as me !

I have tried everything I've read about this but it hasn't worked. I have 5 outstanding app updates to do but when I go to the update screen it is blank. What is wrong?

My ipad2 has 5 outstanding apps to update but my update screen is blank. I've tried rebooting, changing dates, and all other things I've read on here but it's not working. What the heck now?

Apparently, there is a problem with Apple’s servers. I have seen one article from another tech source that was talking about it but I have seen nothing official from Apple.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only.

Regarding Pages: I can't access the document I was writting on at all. I have tried to send the document to my email, I've tried to make a copy but nothing seems to work, it just shows up blank.

Regarding Pages: I was writing using the app Pages when I left the page I was writting on but now I can't access it at all. I have tried to send the document to my email, I've tried to make a copy but nothing seems to work. The document still exists and I can see my writting as I can with all other documents but I can't open that page.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect the iPad to your computer and try to get the document via File sharing
- Try getting the document from iCloud.com if you are using iCloud

CRM SERVICE ECC CONTROLLING Integration

Hi Expert,
We are working with Service Contract mgmt with ECC COntrolling integration.
After we create a Service Contract an Internal Order (CO) is defined in CRM in order to collect service costs.
This Internal Order represents a material service (without cost). The u201Ccostu201D of this material service is the Internal Order balance.
After creating a Service Confirmation, a Sales Order is created in ECC and it is used to bill the material service. Revenues are posted in CO-PA but costs remians still in the Internal Order.
However, in order to have profitability analysis by material service, these costs should be settled to CO-PA and we are currently not able to match the INTERNAL ORDER COSTS with the SERVICE CONFIRMATION REVENUES.
Do you know how can I determine a settlement rule that automatically match those transaction? (the material number is a characteristic to be included)
Thanks and Regards

Hi Ashish,
Could you please tell me how do we assign the debit memo request to the internal order.
I am creating a debit memo request from the confirmation. the debit memo request doesnt have the internal order number that was created in ECC. And hence, I am not able to post the revenue from the confirmation to the internal order.
Could you please help.
Regards,
Itisha

ECC MES integration

Hi,
I am learning ECC MES integration and have a powerpoint with me as a starting point. There I see the following objects being sent over to MES from ECC.
Planned orders
BOMs
Production orders
Process orders
Material Inventory Levels
Inspection Lots data
Master Recipes
Material Details
Batch Details
Maintanence work orders
Notification details
Material and order costs
Then MES sends back the following details
Production Confimrations
Process messages
Material Consumptions
Material Transfers
Inspection Lot result recording
Quality notifications
Batch Char recording
Work order results recording
Maintanence Notifications
My question is how do we send some many objects back and forth. Is it all IDOCS or some other technology ? I know what will be sent will depend upon the scope of the integration.
Thanks

There are several choices for passing the data back and forth.
BAPI/RFC can be used to download and upload from ECC.
IDOCs can also be used though most folks use them with Change Pointers to automatically push documents down to the MES level.
There are Enterprise Services now available for some of the functions you list, but performance is not as good as with either of the first two options.
If configured, XI can be used as the transport mechanism, but that can add overhead to the processing complexity, but also comes with a guaranteed delivery capability.
I would also suggest you look at some of the downloadable templates in SDN for MII. Most are based upon BAPI/RFC.
Regards,
Mike

Zzxc: When I click on a link in my email it doesn't go to the page. It is a blank page. It will work in internet explorer. When I sign in at certain sites, it doesn't redirect. Why is that?

<blockquote>Locked by Moderator.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?locale=en-US&comments_parentId=688606&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
zzxc: When I click on a link in my email it doesn't go to the page. It is a blank page. It will work in internet explorer. When I sign in at certain sites, it doesn't redirect. Why is that?
I am still having the same problem. I did what you said to do, but it didn't help. I cleared all of firefox's cache and still doesn't work.
== Firefox version
==
most recent
== Operating system
==
Windows 7
== Plugins installed
==
just windows,itunes, flash

I have not found a way for the email hypertext to go to the FaceBook App, but I no longer click on the hypertext as I know whatever information or posting it is directing me to in FaceBook will show up when I open my FaceBook App. I also have noticed that many pop-ups on the Browser don't actually know if you already have the software they are promoting.

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

Videos I burnt to disc on my pc won't play on my macbook, when I insert the disc into the macbook it says it's blank but plays fine on the pc

Videos I burnt to disc on my pc won't play on my macbook, when I insert the disc into the macbook it says it's blank but plays fine on the pc, does anyone know how to fix this? The photo's I burnt on the exact same type of disc work fine in both pc and macbook but the videos will only play on the pc.

If you are trying to play these on quicktime then what video format are those videos?
Wmp's? You need to install Flip4Mac.
Most other formats? Install Perian.
Or just use vlc instead. It's a much better, more powerful, and more general video player.

I cant acces the itunes store. everytime i try it just say accessing itunes store for days and I've tried fixing it but it just wont work :(

someone please help me.. I have windows and every time I try to acces the store just come up with the loading bar but it never loads. Ive followed several instructions but they have never worked either.

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

APOKZ blank but ECC-SCM integration works OK!

Similar Messages

Maybe you are looking for