Apologies for Server Outage

Folks,
We experienced a 6 hour server outage today from 6pm to midnight Eastern US
time. I apologize for any inconvenience that you may have experienced. If
you sent us an email / made a support request / attempted a newsgroup
posting / etc. at that time, please resend it as we likely did not receive
it.
Thanks for your patience.
Neelan Choksi
SolarMetric Inc.
[email protected]
202-595-2064 x1331
http://www.solarmetric.com
Vote for Kodo JDO as Best Java Data Access Tool, Best Database Tool or
Driver, and Best Persistence Architecture,
at the Java Developers Journal 2003 Readers' Choice Awards. The ballot is
online at http://www.sys-con.com/java/readerschoice2003/vote.cfm.

As the server side application was created with empty folder;
(with no server side script file) It won't support FLV playback
based subscribers. Please look into the
samples/applications/vod/main.asc file and look for server side
script which you would have to add just to support FLV playback
component.

Similar Messages

WebtopNaming - can not find server name for server ID

We have a LB, and web servers in front of OpenSSO app servers in our environment.
OpenSSO debug log CoreSystem fills up with lot of errors like these:
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
Any ideas about the root cause?
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Server IDs -> [03, 02, 01, 04, 05]
amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

Thank You for the response.
Here is my site configuration in OpenSSO:
There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
Servers:
http://host4.company.com:8080/openSSO
http://host5.company.com:8080/openSSO
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
Only one site with secure URLs is configured
Sites:
site1
Primary URL: https://opensso-qa.company.com:443/openSSO
Assigned Servers:
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
From the CoreSystem log, Server ID definitions are:
https://host4.company.com:8443/openSSO=01
https://host5.company.com:8443/openSSO=02
https://opensso-qa.company.com:443/openSSO=03
http://host4.company.com:8080/openSSO=04
http://host5.company.com:8080/openSSO=05
Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs.

While trying to install Creative cloud for my PC all i keep getting is Searching for Server

Searching for Server that is all i get when trying to install creative cloud on my pC and YES i am running Windows 7 and have high speed internet service. HELP

Sweetpea5154 you may be facing a connection error. Is the computer you are utilizing on a managed network? If not then please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve connection errors.

Problem with skin for server side buttons.

Hi,
I have a problem with the skin for server side renderd buttons.
In my CSS file I have :
.AFButtonStartIcon:alias
content:url(/skins/images/btns.JPG);
.AFButtonEndIcon:alias
content:url(/skins/images/btne.JPG);
.AFButtonTopBackgroundIcon:alias
content:url(/skins/images/btntb.JPG);
.AFButtonBottomBackgroundIcon:alias
content:url(/skins/images/btnbb.JPG);
JPG files in project are in dir "public_html/skins/images".
In WAR file,the JPG files are in "/skins/images" directory.
Skin configuration is correct because other settings from CSS
file are functioning fine after deploying.
But buttons are standard browser buttons and are not taking the images i have used.
In document provided by Oracle it says:
(Note: These icons must be specified using either context-image or
resource-image icons. Text-based icons are not allowed.)
I am nt able to understand what this means?

Perhaps this thread will help.
JSF Skining Button Images
The doc should say whether or not the width/height is a requirement. But since it doesn't mention it, try adding a width and height.
- Jeanne

Forum label for Server/Client

Mac OS X Server posts frequently end up in the Mac OS X Client forum. Perhaps a link in the Client forum to the Server category could help, or labelling the Client 10.6, 10.5, 10.4, 10.3 and earlier forums "Client" so people don't mispost anything for Server could help prevent posts for Server ending up in Client?
Or perhaps a Server category could be put together with the Mac OS X and related software?
Or perhaps in the Mac OS X support pages, a link to Server category could be added?
Just some suggestions.

a brody,
Except for rare exceptions the forum and category names match the actual product marketing name. The server forums are marked as server and we will happily move the occasional post that shows up in the client section when it occurs.
-Eric W.

Can i use same Server for server side and client??

Hi,
i m developing webservices in java and using two different server for server side and client.
e.g. i m using one tomcat server on a machine to run webservice and again using one more tomcat server on client side at different machine.
and hence it need two tomcat server.
But i want only one server to run webservice and client.
So please help me out...
Thanks

Hi,
It is always recommended to maintain different servers
REgards,
Ravi.

HP Officejet Pro 6830 Scanner drivers for Server 2012

Printer: HP Officejet Pro 6830 e-All-in-One Printer
Serial Number: [edited Serial Number by Moderator]
Product Number: E3E02A
Email Address: [edited email by moderator]
Operating System: Windows Server 2012
I have an issue when trying to install the printer and scanner driver on Server 2012. The driver on the website for Server 2012 is 32Bit link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4138&lc=en&cc=za&dlc=en&sw_lang=&product=5390...
And the drivers that came with the printer give the following error: "This computer does not meet the following system requirement(s): The Operating System of this computer is not supported."
Have phoned HP on the support line all they do is give me a different phone number to phone.
Please someone help.

Hi @Mark-active
Although my area of expertise is with consumer products and software, not commerical products such as servers, I do have something that might be helpful; Setting Up the Printer on Windows Server 2003, 2008, or 2012 for HP Officejet Printers.
If the issue you are experiencing persists, I suggest giving us a call. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Failed to load webapp and Could not discover administration URL for server

Not able to deploy application on SOA server.
Hi All,
I am not able to deploy my application to the SOA server as i am getting the below error..I am not using bam server at all and still it is saying "Could not discover administration URL for server 'bam_server1'." plz help.
[07:53:58 PM] [Deployer:149191]Operation 'deploy' on application 'ProjectCreationApplication' is initializing on 'soa_server1'
[07:53:58 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[07:53:59 PM] [Deployer:149193]Operation 'deploy' on application 'ProjectCreationApplication' has failed on 'soa_server1'
[07:53:59 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: Failed to load webapp: '/workflow/ProjectCreation_UI'.
[07:54:01 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
[07:54:01 PM] Caused by: java.lang.ClassNotFoundException: oracle.bpel.services.workflow.client.worklist.servlet.IntegrateTaskFlowWithTask
[07:54:01 PM] See server logs or server console for more details.
[07:54:01 PM] weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
[07:54:03 PM] Taskflow deployment failed to deploy to server. Remote deployment failed
[07:54:03 PM] #### Deployment incomplete. ####
[07:54:03 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

Hi Vipin,
Might be the way you're deploying your ADF UI project.
Are you right clicking the name of your ADF UI project in the Application Navigator tab and then clicking "Deploy"? While this works great for your BPM composite project, you'll get errors like this when deploying the ADF project in the same manner.
Dan

Unable to use RAS SDK for server-side printing for XI 3.1

Hi all,
I am using RAS SDK for server-side printing. Here are my codes:
ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr();
IEnterpriseSession enterpriseSession = sessionMgr.logon("Administrator", "", "cdi5boe", "secEnterprise");
IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
//out.println("Current User is = " + enterpriseSession.getUserInfo().getUserName());
//out.println ("<br>");
IInfoObjects infoObjects = iStore.query("SELECT * FROM CI_INFOOBJECTS WHERE SI_Kind='CrystalReport' AND SI_NAME = 'Sales Print'");
IInfoObject infoObject = (IInfoObject)infoObjects.get(0);
IReportAppFactory reportAppFactory = (IReportAppFactory) enterpriseSession.getService("RASReportFactory");
ReportClientDocument rcd = new ReportClientDocument();
rcd = reportAppFactory.openDocument(infoObject,0, java.util.Locale.US);
//Create print options to use when printing.
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("
cdi5boe
HPLaserJ");
printOptions.setJobTitle("Test Printer Job");
printOptions.setPrinterDuplex(PrinterDuplex.horizontal);
printOptions.setPaperSource(PaperSource.auto);
printOptions.setPaperSize(PaperSize.paperLetter);
printOptions.setNumberOfCopies(1);
printOptions.setCollated(false);
PrintReportOptions.PageRange printPageRange = new PrintReportOptions.PageRange(1,1);
printOptions.addPrinterPageRange(printPageRange);
//Print report.
rcd.getPrintOutputController().printReport(printOptions);
When I run the report, I got the following errors:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKPrinterException: com.businessobjects.crystalreports.printer.bean.ReportPrinter---- Error code:-2147215357 Error code name:internal
I consult the Diamond Technical Community and I found the issue related to printer name:
https://boc.sdn.sap.com/node/498
However, I did check the printer name, it is accessible via Windows Explorer.
Anyone knows how to resolve this?
Regards,
Derek

It doesn't appear to be listed as a dependency in the developer docs, but would you try putting the ReportPrinter.jar in your RAS app?
Sincerely,
Ted Ueda

Development Environment for Server APIs in Webcenter Interaction 10.3

Hi, I installed “Oracle Web Center Interaction 10.3" on standard environment mentioned by oracle (Window 2003 server, IIS6.0, SQL Server 2005). Everything works fine concerning the portal and services.
I also have visual studio 2005 on the same machine and trying to setup a development environment where I can user server APIs (I start with creating IPTSession).
I am using follwong code to start with:
/String serverConfigDir = ConfigPathResolver.GetOpenConfigPath();
IOKContext configContext = OKConfigFactory.createInstance(serverConfigDir, "portal");
PortalObjectsFactory.Init(configContext);
IPTSession ptSession = PortalObjectsFactory.CreateSession();
Problem: code compiles if I add few dlls, but it do not run, it throws following error
com.plumtree.openkernel.exceptions.OKFactoryException: Error in AOKFactory.createAndInitializeInstance, unable to create object with name 'com.plumtree.openkernel.impl.config.Config' in assembly or JAR file 'openconfig'.
I think either server APIs are not more supported in 10.3 or I do not know how to setup the development environment for server APIs.
Can anyone help??

i have already tried putting hardcoded path but it didn't help, morover the previous line gives me correct path.
I issue i mentioned seems to be related with some setting or missing native dlls
com.plumtree.openkernel.exceptions.OKFactoryException: Error in AOKFactory.createAndInitializeInstance, unable to create object with name 'com.plumtree.openkernel.impl.config.Config' in assembly or JAR file 'openconfig'.
i got follwing extract from the wsserver-wrapper.log file
INFO | jvm 1 | 2009/02/20 12:26:17 | 2-20-2009 12:26:17.606 Info OpenKernel.Config Disabled-1235112977434 WrapperStartStopAppMain com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Loading config data from C:\bea\alui\ptws\10.3.0\bin\..\..\..\common/../settings
INFO | jvm 1 | 2009/02/20 12:26:18 | 2-20-2009 12:26:18.325 Info OpenKernel.Config Disabled-1235112977434 WrapperStartStopAppMain com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Setting subscription data.
INFO | jvm 1 | 2009/02/20 12:26:18 | container config context:EAS:wsserver
i didn't modified anything in any config file, just configured everything on one machine with oracle configuration manager

For server the Node Manager associated with machine is not reachable

Hello all,
I am getting this error, when i start my Managed Server which is in shutdown state
For server SAA-Dev-1, the Node Manager associated with machine vm-bea-dev is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
The configuration details are
i am using weblogic 9.2 MP3 version in windows 2k3 server.
It has a machine vm-bea-dev, a cluster cluster-saa-dev, to which both the managed servers saa-dev-1 and saa-dev-2 are assigned. There are 3 applications deployed onto managed Server 1 and 1 for managed Server 2.
Managed Server 1 is in shutdown state, and when i start the server, it gives the error specified below
For server SAA-Dev-1, the Node Manager associated with machine vm-bea-dev is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
The same for Managed Server 2 too, and this server is in Admin State, i dont know how it went into that state.
Can somebody please help me reslove it.
Thanks in advance

Actually the cert is coming from your Dev machine but it is sending the Prod cert.
What cert is used by your admin server ? It should match the host name.
So your Dev machine is apparently using a copy of the prod cert / keystore rather than using its own DEV cert. It's not clear from your post whether this is the nodemanager using the wrong cert, or the managed server. So both should be checked.
The managed servers need to be using a cert that matches their host name. If you have a managed server on VM-BEA-DEV, then the cert needs to be CN=VM-BEA-DEV. You can also use a load-balancer CN name in the cert if you have the cluster's HTTP values set to match.
In your nodemanager.properties, are you explicitly accessing keystores, such as with:
KeyStores=CustomIdentityAndJavaStandardTrust
CustomIdentityAlias=some_alias
CustomIdentityKeyStoreFileName=some_path_to_keystore
CustomIdentityKeyStorePassPhrase={3DES}...
CustomIdentityKeyStoreType=jks
CustomIdentityPrivateKeyPassPhrase={3DES}
In my multi-machine clusters, I have multiple certificates such as:
admin machine1:
has a cert for use by the admin server and NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers
all other machines:
has a cert for use by NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers

I gave the iphone for servis and they gave me back another one used. Is that legal, I gave the iphone for servis and they gave me back another one used. Is that legal

I gave my iphone for servis and the sailman return to me another one that has been used, without giving more details, telling me that this is the way apple does business. IS THAT TRUE?

A refurbished until should appear identical to a new unit...you should not be able to tell the difference. If your unit is truly "used"...scratches, signs of use, etc., then Apple's warranty terms were not followed.
All refurbished units receive new cases & batteries, at a minimum...that's why you can't tell the difference.

[Bug?] DSC - Registering for Server Events

[LV2009, Win 7 Pro]
Howdy (Ben S another one for you? )
I am trying to register for alarm events.
This works fine by using the Register for Shared Variable Events method.
Since I have a lot of SVs and a dedicated server, I thought listen to the server would be much easier to implement.
The LabVIEW Help implies that using the Request System Event Notifications.vi will do the trick:
However, I can't seem to Register for Server Events - it doesn't work.
The code seems quite simple (below) - I just want to listen to all SVs on the localhost (default).
All the Events are coming through to the DSC (viewed in MAX), however, using the Server method I don't get any notifications through the Event Structure.
Am I doing something wrong? - Or is this a bug?
Is there somewhere I need to configure stuff?
Or does it just not send me Alarm and Notification Events of Shared Variables?
What does it send me then?
I couldn't even get the Example in NI Example Finder to work (labview\examples\lvdsc\Event Structure Support).
It shows the SV Registered Event but not the Server/System Event.
Attached is a simple project I used to demonstrate this - a SV configured for a HiHi Alarm:
The work around is to list out all Shared Variables and just read that from disk and load it into the application etc...
However, it is much more desirable to subscribe to the server and get all SV Events - is this possible?
Cheers
-JG
Certified LabVIEW Architect * LabVIEW Champion
Attachments:
DSC Server Events [LV2009].zip ‏20 KB

Ravens Fan wrote:
I think if you put in the fully qualified name for the network path and process and library on the other machine, you should be able to get the list.
You'll have to try it and find out.
Cheers for posting
From the help - I didn't think this was possible?
I gave it a go using the following naming
But I get the following error (I tried to connect to multiple SVE across our network and got the same error).
I can use though and it returns the local SV List, so I think I have the naming correct?
<edit>
My other thought is to build a hook in to the app and invoke this across the network using VI Server, so that it can run the VI on the localhost then report back the SV List).
</edit>
Certified LabVIEW Architect * LabVIEW Champion

Netsh mbn for server 2012 R2 (Mobile Broadband)

Hi,
I cant find the mbn option in the windows 2012R2 server
is it disabled for server 2012R2? or there is some settings (services - dlls - other dependencies) so the mbn option will show up?below is the output of netsh /? command, plz help?
I have 2012 R2 essentials running on Dell T320 server,
C:\Windows\system32>netsh /?
Usage: netsh [-a AliasFile] [-c Context] [-r RemoteMachine] [-u [DomainName\]Use
rName] [-p Password | *]
             [Command | -f ScriptFile]
The following commands are available:
Commands in this context:
?              - Displays a list of commands.
add            - Adds a configuration entry to a list of entries.
advfirewall    - Changes to the `netsh advfirewall' context.
branchcache    - Changes to the `netsh branchcache' context.
bridge         - Changes to the `netsh bridge' context.
delete         - Deletes a configuration entry from a list of entries.
dhcpclient     - Changes to the `netsh dhcpclient' context.
dnsclient      - Changes to the `netsh dnsclient' context.
dump           - Displays a configuration script.
exec           - Runs a script file.
firewall       - Changes to the `netsh firewall' context.
help           - Displays a list of commands.
http           - Changes to the `netsh http' context.
interface      - Changes to the `netsh interface' context.
ipsec          - Changes to the `netsh ipsec' context.
ipsecdosprotection - Changes to the `netsh ipsecdosprotection' context.
lan            - Changes to the `netsh lan' context.
namespace      - Changes to the `netsh namespace' context.
nap            - Changes to the `netsh nap' context.
netio          - Changes to the `netsh netio' context.
ras            - Changes to the `netsh ras' context.
rpc            - Changes to the `netsh rpc' context.
set            - Updates configuration settings.
show           - Displays information.
trace          - Changes to the `netsh trace' context.
wcn            - Changes to the `netsh wcn' context.
wfp            - Changes to the `netsh wfp' context.
winhttp        - Changes to the `netsh winhttp' context.
winsock        - Changes to the `netsh winsock' context.
wlan           - Changes to the `netsh wlan' context.
The following sub-contexts are available:
advfirewall branchcache bridge dhcpclient dnsclient firewall http interface ips
ec ipsecdosprotection lan namespace nap netio ras rpc trace wcn wfp winhttp wins
ock wlan
To view help for a command, type the command, followed by a space, and then
type ?.
C:\Windows\system32>ver
Microsoft Windows [Version 6.3.9600]
C:\Windows\system32>netsh
netsh>

Hi
I made some further research, the "netsh show helper" will show all the dlls that contribute to the netsh subcommands, i run this command on my windows 8 laptop as below
C:\Users\Sinan1>netsh show helper
Helper GUID DLL Filename Command
{02BC1F81-D927-4EC5-8CBC-8DD65E3E38E8} AUTHFWCFG.DLL advfirewall
{FB10CBCA-5430-46CE-B732-079B4E23BE24} AUTHFWCFG.DLL consec
{35342B49-83B4-4FCC-A90D-278533D5BEA2} AUTHFWCFG.DLL firewall
{4BD827F7-1E83-462D-B893-F33A80C5DE1D} AUTHFWCFG.DLL mainmode
{4D0FEFCB-8C3E-4CDE-B39B-325933727297} AUTHFWCFG.DLL monitor
{00770721-44EA-11D5-93BA-00B0D022DD1F} HNETMON.DLL bridge
{6DC31EC5-3583-4901-9E28-37C28113656A} DHCPCMONITOR.DLL dhcpclient
{8A6D23B3-0AF2-4101-BC6E-8114B325FE17} NETIOHLP.DLL dnsclient
{8B3A0D7F-1F30-4402-B753-C4B2C7607C97} FWCFG.DLL firewall
{44F3288B-DBFF-4B31-A86E-633F50D706B3} NSHHTTP.DLL http
{0705ECA1-7AAC-11D2-89DC-006008B0E5B9} IFMON.DLL interface
{1C151866-F35B-4780-8CD2-E1924E9F03E1} NETIOHLP.DLL 6to4
{97C192DB-A774-43E6-BE78-1FABD795EEAB} NETIOHLP.DLL httpstunnel
{725588AC-7A11-4220-A121-C92C915E8B73} NETIOHLP.DLL ipv4
{500F32FD-7064-476B-8FD6-2171EA46428F} NETIOHLP.DLL ipv6
{90E1CBE1-01D9-4174-BB4D-EB97F3F6150D} NETIOHLP.DLL 6to4
{90E1CBE1-01D9-4174-BB4D-EB97F3F6150D} NETIOHLP.DLL isatap
{1C151866-F35B-4780-8CD2-E1924E9F03E1} NETIOHLP.DLL isatap
{1C151866-F35B-4780-8CD2-E1924E9F03E1} NETIOHLP.DLL portproxy
{78197B47-2BEF-49CA-ACEB-D8816371BAA8} NETIOHLP.DLL tcp
{1C151866-F35B-4780-8CD2-E1924E9F03E1} NETIOHLP.DLL teredo
{F7E0BC27-BA6E-4145-A123-012F1922F3F1} NSHIPSEC.DLL ipsec
{F7E0BC29-BA6E-4145-A123-012F1922F3F1} NSHIPSEC.DLL dynamic
{F7E0BC28-BA6E-4145-A123-012F1922F3F1} NSHIPSEC.DLL static
{1D8240C7-48B9-47CC-9E40-4F7A0A390E71} DOT3CFG.DLL lan
{B572D5F3-E15B-4501-84F2-6626F762AFB1} WWANCFG.DLL mbn
{B341E8BA-13AA-4E08-8CF1-A6F2D8B0C229} NETIOHLP.DLL namespace
{00B399EA-447F-4B19-8393-F9D71D7760F9} NAPMONTR.DLL nap
{3F8A1180-FF5D-4B5B-934C-D08DFFBC9CBC} NAPMONTR.DLL client
{B123BAAA-79E9-49FD-AB2C-E87C56CE4CFF} NAPMONTR.DLL hra
{931852E2-597D-40B9-B927-55FFC81A6104} NETIOHLP.DLL netio
{B7BE4347-E851-4EEC-BC65-B0C0E87B86E3} P2PNETSH.DLL p2p
{E35A9D1F-61E8-4CF5-A46C-0F715A9303B8} P2PNETSH.DLL group
{9AA625FC-7E31-4679-B5B5-DFC67A3510AB} P2PNETSH.DLL database
{FBFC037E-D455-4B8D-80A5-B379002DBCAD} P2PNETSH.DLL idmgr
{9E0D63D6-4644-476B-9DAC-D64F96E01376} P2PNETSH.DLL pnrp
{1DD4935A-E587-4D16-AE27-14E40385AB12} P2PNETSH.DLL cloud
{AD1D76C9-434B-48E0-9D2C-31FA93D9635A} P2PNETSH.DLL diagnostics
{6EC05238-F6A3-4801-967A-5C9D6F6CAC50} P2PNETSH.DLL peer
{0705ECA2-7AAC-11D2-89DC-006008B0E5B9} RASMONTR.DLL ras
{42E3CC21-098C-11D3-8C4D-00104BCA495B} RASMONTR.DLL aaaa
{90FE6CFC-B6A2-463B-AA12-25E615EC3C66} RASMONTR.DLL diagnostics
{13D12A78-D0FB-11D2-9B76-00104BCA495B} RASMONTR.DLL ip
{36B3EF76-94C1-460F-BD6F-DF0178D90EAC} RASMONTR.DLL ipv6
{592852F7-5F6F-470B-9097-C5D33B612975} RPCNSH.DLL rpc
{C07E293F-9531-4426-8E5C-D7EBBA50F693} RPCNSH.DLL filter
{D3E9D893-852F-4E22-B05D-99293065773D} NETTRACE.DLL trace
{C100BECD-D33A-4A4B-BF23-BBEF4663D017} WCNNETSH.DLL wcn
{3BB6DA1D-AC0C-4972-AC05-B22F49DEA9B6} NSHWFP.DLL wfp
{0BFDC146-56A3-4311-A7D5-7D9953F8326E} WHHELPER.DLL winhttp
{B2C0EEF4-CCE5-4F55-934E-ABF60F3DCF56} WSHELPER.DLL winsock
{D424E730-1DB7-4287-8C9B-0774F5AD0576} WLANCFG.DLL wlan
As you see, the mbn command is added from the "WWANCFG.DLL" , there is a command "netsh add helper <dll name>"
I couldn't find the WWANCFG.dll on my windows server 2012 R2 box, how can I add/download/install/register this dll?
What are the dependencies of the WWANCFG.dll? are there any other dlls that need to e registered?
Thanks for your help
/sinan

For server Eagle-PROD-Instance, the Node Manager associated with machine

I have a wlst script that creates a domain and a managed server. I associate the server with a machine that's attached to a node manager. It creates the managed server fine but when I try and start it I get this error
For server Eagle-PROD-Instance, the Node Manager associated with machine Eagle-Machine is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
The machine is associated with the Node Manager and the NM is running. I can start the managed server from the command line, but not from the admin console
This is the script, am I missing something?
Thanks
name: createManagedServer.py
description: This script create the weblogic domain, and executes each weblogic queue module
subfile. it reads a property file : weblogic_wlst.properties for server domain information
author     : mike reynolds - edifecs 2011
created     : April 8th 2011
import sys
from java.lang import System
from java.util import Properties
from java.io import FileInputStream
from java.io import File
from weblogic.management.security.authentication import UserEditorMBean
from weblogic.management.security.authentication import GroupEditorMBean
from weblogic.management.security.authentication import UserPasswordEditorMBean
# Loads the contents a properties file into a java.util.Properties
# configPropFile = "weblogic_wlst.properties"
def loadPropertiesFromFile(configPropFile):
     configProps = Properties()
     propInputStream = FileInputStream(configPropFile)
     configProps.load(propInputStream)
     propInputStream.close()
     return configProps
def getProperties():
     importConfigFile = sys.argv[1]
     print importConfigFile
     domainProps = loadPropertiesFromFile(importConfigFile)
     properties = Properties()
     input = FileInputStream(importConfigFile)
     properties.load(input)
     input.close()
     return properties
def create_users(username, password, description):
# create admin user
cmo.getFileRealms()
try:
userObject=cmo.getSecurityConfiguration().getDefaultRealm().lookupAuthenticationProvider("DefaultAuthenticator")
userObject.createUser(username,password,description)
print "Created user " + username + "successfully"
except:
print "check to see if user " + username + " exists "
def add_user_to_group(username):
print "Adding a user to group ..."
cmo.getFileRealms()
try:
userObject2 = cmo.getSecurityConfiguration().getDefaultRealm().lookupAuthenticationProvider("DefaultAuthenticator")
userObject2.addMemberToGroup('Administrators',username)
print "Done adding user " + username
except:
print "check to see if user " + username + " is already in group "
def connect_server(user,pw,url):
          connect(user,pw,url)
def create_machine():
try:
print 'Creating machine' + machine
# cd('/')
# create(machine, 'Machine')
mach = cmo.createUnixMachine(machine)
mach.setPostBindUIDEnabled(true)
mach.setPostBindUID('oracle')
mach.setPostBindGIDEnabled(true)
mach.setPostBindGID('oracle')
mach.getNodeManager().setNMType('ssl')
except:
     print "machine exists"
def build_domain():
### Read Basic Template
WL_HOME = "C:/Oracle/Middleware/wlserver_10.3"
readTemplate(WL_HOME+"/common/templates/domains/wls.jar")
template=WL_HOME+"/common/templates/domains/wls.jar"
cd('Servers/AdminServer')
set('ListenAddress', adminServerAddress)
set('ListenPort', int(adminServerPort))
cd('/')
cd('/Security/base_domain/User/weblogic')
cmo.setPassword('w3bl0g1c')
### Write Domain
setOption('OverwriteDomain', 'true')
print "writing domain " + domainDir + domainName
writeDomain(domainDir+'/'+domainName)
closeTemplate()
create_machine()
arg = "Arguments=\" -server -Xms256m -Xmx768m -XX:MaxPermSize=256m -da\""
prps = makePropertiesObject (arg)
domain = domainDir + domainName
try:
     #startNodeManager()
#nmConnect('weblogic', 'w3bl0g1c', host, 5556, 'AdminServer', domain, 'ssl')
# nmStart('AdminServer')
startServer('AdminServer', domainName, url, adminUser, adminPassword, domainDir, 'true')
except:
print "could not connect to Node Manager"
def create_server():
# get server instance properties
name = properties.getProperty("serverName")
domain = properties.getProperty("domainName")
port = properties.getProperty("listenPort")
address = properties.getProperty("listenAddress")
servermb=getMBean("Servers/" + name)
machine = properties.getProperty("machineName")
nodePort = properties.getProperty("nodeManagerPort")
domainDir = properties.getProperty("domainDir")
if servermb is None:
          startEdit()
          cd('/')
          cmo.createServer(name)
          cd('/Servers/'+ name)
          cmo.setListenAddress(address)
          cmo.setListenPort(int(port))
          cd('/')
          cmo.createMachine(machine)
          cd('/Machines/' + machine + '/NodeManager/' + machine )
          cmo.setNMType('Plain')
          cmo.setListenAddress(address)
          cmo.setListenPort(int(nodePort))
          cmo.setDebugEnabled(false)
          cd('/Servers/' + name)
          cmo.setListenPortEnabled(true)
          cmo.setJavaCompiler('javac')
          cmo.setClientCertProxyEnabled(false)
          cmo.setMachine(getMBean('/Machines/' + machine ))
          cmo.setCluster(None)
          cd('/Servers/' + name + '/SSL/' + name)
          cd('/Servers/' + name + '/ServerDiagnosticConfig/' + name)
          cmo.setWLDFDiagnosticVolume('Low')
          cd('/Servers/' + name)
          cmo.setCluster(None)
          cd('/Servers/' + name + '/SSL/' + name)
          cmo.setEnabled(false)
### Executable Script
### CreateDomain.py
### Define constants
WL_HOME = "C:/Oracle/Middleware/wlserver_10.3"
print "Starting the script ..."
print "Getting properties ... "
properties = getProperties()
adminServerAddress = properties.getProperty("adminServerAddress")
adminServerPort = properties.getProperty("adminServerPort")
adminUser = properties.getProperty("adminUser")
adminPassword = properties.getProperty("adminPassword")
edifecsUser = properties.getProperty("edifecsUser")
edifecsPassword = properties.getProperty("edifecsPassword")
host = properties.getProperty("host")
domainDir = properties.getProperty("domainDir")
domainName = properties.getProperty("domainName")
user = properties.getProperty("username")
pw = properties.getProperty("passwd")
url = properties.getProperty("adminURL")
machine = properties.getProperty("machineName")
print "Building the domain..."
build_domain()
print "Connecting to server"
connect_server(adminUser, adminPassword, url)
edit()
startEdit()
# create managed server
# create_machine()
create_server()
print "Creating users"
# starting configuration tree
serverConfig()
create_users(adminUser, adminPassword, "Administrator")
add_user_to_group(adminUser)
create_users(edifecsUser, edifecsPassword,"Administrator")
add_user_to_group(edifecsUser)
# have to restart edit to save config
edit()
startEdit()
# nmKill('AdminServer')
print "saving configuration"
try:
     save()
     activate(block="true")
     print "script returns SUCCESS"
     print "admin server is running"
     print "starting server " + name
     startServer(domainName, name ,url,adminUser, adminPassword, domainDir,'true')
except:
     print "failed to save server"
     dumpStack()

Actually the cert is coming from your Dev machine but it is sending the Prod cert.
What cert is used by your admin server ? It should match the host name.
So your Dev machine is apparently using a copy of the prod cert / keystore rather than using its own DEV cert. It's not clear from your post whether this is the nodemanager using the wrong cert, or the managed server. So both should be checked.
The managed servers need to be using a cert that matches their host name. If you have a managed server on VM-BEA-DEV, then the cert needs to be CN=VM-BEA-DEV. You can also use a load-balancer CN name in the cert if you have the cluster's HTTP values set to match.
In your nodemanager.properties, are you explicitly accessing keystores, such as with:
KeyStores=CustomIdentityAndJavaStandardTrust
CustomIdentityAlias=some_alias
CustomIdentityKeyStoreFileName=some_path_to_keystore
CustomIdentityKeyStorePassPhrase={3DES}...
CustomIdentityKeyStoreType=jks
CustomIdentityPrivateKeyPassPhrase={3DES}
In my multi-machine clusters, I have multiple certificates such as:
admin machine1:
has a cert for use by the admin server and NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers
all other machines:
has a cert for use by NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers

Apologies for Server Outage

Similar Messages

Maybe you are looking for