App builder keeps hanging after splash screen images added

After I upload all my splash screens for SD and HD, I cannot proceed to the next screen.
There are green checks next to HD and SD, and all looks good.
I have not uploaded any fonts as there is no HTML in the app.
I have deleted and re-downloaded the app builder and still get the same behavior.

The problem was that one of the images had a resolution of 72.09 instead of an even 72. after I changed it it worked. Thanks.

Similar Messages

  • Win XP Hangs after Splash Screen (PointSec Loaded)

    I have a lenovo t400 laptop, that has Pointsec encryption (6.1.3) ,and WinXP loaded on it.
    I ran the Think Vantage Lenovo update tool which downloaded and installed a number of updates - as I hadn't run it for ages.
    Now when I try to start the computer it hangs after the XP splash screen is displayed. The screen simply goes black.
    I have tried the various Safe Mode options (include VGA Mode, and start with last successful configuration) without luck. They also fail to boot.
    The flow is:
    Power On, PointSec Authentication Screen, Win XP Splash screen, then a black screen
    I have successfully got into the system using UBCD4Win with the pointsec plugin loaded, this loads a WinPE type environment via a USB stick and allows me to access the C: drive unencrypted (as I have authenticated with Pointsec).
    I'm really stuck for ideas as to which of the update is causing the problem, and would love to hear some suggestions on how to fix this situation.
    Additional Info:
    The last few lines in ntbtlog.txt is:
    Did not load driver Direct Parallel
    Did not load driver SM bios service
    Did not load driver SM bus service
    Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS
    Looking in:
    c:\Windows\$NtServicePackUninstall$
    it looks like Service Pack 3 has been installed:
    The file: spuninst\spuninst,inf shows:
    NtServicePackVersionText = "Service Pack 3"
    NtServicePackPreviousVersionText = "Service Pack 2"
    Solved!
    Go to Solution.

    Fixed!!!
    The problem was the lenovo updates (most likely culprit being the video driver I presume).
    Using UBCD4Win with the pointsec plugin I was able to
    * get  access to the decrypted c: drive
    * Manually rolled back the updates to c:\windows\system32 and c:\windows\system32\drivers
    Original files were found in places like: c:\windows\system32\reinstallbackups\008\DriverFiles
    * Finally I had to roll back the registry updates that the updates did. UBCD4Win provides a tool to do this:  Registry Restore Wizard. It basically just looks in the System Restore Directory c:\System Volume Information and lists all the available Restore Points (thankfully the Lenovo updates mark a restore point before they run). You can also do this manually using the following instructions:
    http://hypography.com/forums/tutorials-and-how-tos/17193-xp-recovery-instructions-for-ubcd4win.html
    This done the system booted successfully.
    I most definitely will be staying clear of pressing the big blue button from now on. That was a real nightmare to fix.

  • ZFD agent hangs after splash screen

    I've got a maddening problem with the latest IR4 Hp1 agent. I had a
    thread going on about uninstalling/reinstalling in this forum.
    I have a classic example on my bench. I have 3 identical machines. I
    had just "fixed" the agent by uninstalling/reinstalling. 2 of them are
    now broken again. What happens is you see the splash screen, and the
    zen icon in the tray has the "off line" appearance. You can't get a
    menu by right clicking. Applications don't appear, nor do start menu
    entries, nor does Application Explorer. Running Naldiag will cause it
    to hang in the background.
    Uninstalling and reinstalling the agent fixes this, however it will
    happen again. I also deleted the workstation objects in the tree just
    in case and let them reregister with the new agent.
    Any suggested trouble shooting tactics to try?

    Have you tried back-revving the agent to see if this is a
    version specific problem?
    >>> On 10/14/2009 at 9:59 AM, in message
    <pPkBm.18495$[email protected]>, Patrick
    Farrell<[email protected]> wrote:
    > Patrick Farrell wrote:
    >> I've got a maddening problem with the latest IR4 Hp1
    > agent. I had a
    >> thread going on about uninstalling/reinstalling in this
    > forum.
    >>
    >> I have a classic example on my bench. I have 3
    > identical machines. I
    >> had just "fixed" the agent by uninstalling/reinstalling.
    > 2 of them are
    >> now broken again. What happens is you see the splash
    > screen, and the
    >> zen icon in the tray has the "off line" appearance. You
    > can't get a
    >> menu by right clicking. Applications don't appear, nor
    > do start menu
    >> entries, nor does Application Explorer. Running Naldiag
    > will cause it
    >> to hang in the background.
    >>
    >> Uninstalling and reinstalling the agent fixes this,
    > however it will
    >> happen again. I also deleted the workstation objects in
    > the tree just
    >> in case and let them reregister with the new agent.
    >>
    >> Any suggested trouble shooting tactics to try?
    >
    > Grrr... another one went down this morning. Reload the
    > agent, and it's
    > fine.

  • Lenovo Ideapad s10e Keeps Restarting after Splash Screen

    Hey, my Lenovo s10e perpetually restarts after the Lenovo splash screen. The blinking cursor comes up for 5 seconds and then the computer restarts again. F1 for system bios or F8 for safe mode do not work. Taking out battery/AC and holding power button for 40 secs also yields no results.
    Computer had been working fine, when inexplicably the virtual memory shot up and the paging file had to be increased. Tried to shut down the computer but it wasn't responding, so I did so manually. I have not been able to get the computer to boot up properly since.
    I spoke with Lenovo on the phone and they said it was a motherboard issue, and the computer had to be sent in. Was wondering if anyone had some other possible solutions before I'm forced to ship it out.
    All the best,
    Andom

    Hey thanks for the reply.
    Unfortunately, One Key Recovery does not do anything: splash screen and blinking cursor come up before restarting again. I also wouldn't want to do anything that makes me lose my data.
    Lenovo support said they would be able to fix it without reformatting HD, so I guess I'll have to go that option...unfortunately, max estimate is $575.

  • Some games to not continue after splash screen.

    I've already asked it on answers.microsoft.com but didn't get any reply. So, thought I would ask here.
    What I've tried:
    App troubleshooter
    sfc /scannow
    Answers in http://superuser.com/questions/562188/windows-8-metro-apps-wont-load
    also, I've tried some technet links but in vain.
    I've installed two games - Sonic Dash and Despicable Me 2:Minion Rush. Both of these games to not work after splash screen and they get minimized.
    I've checked the event log and found this
    Activation of app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App failed with error: The remote procedure call failed. See the Microsoft-Windows-TWinUI/Operational
    log for additional information.
    And full details here
    Faulting application name: Template.exe, version: 2.0.0.0, time stamp: 0x5492b318
    Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53086d7c
    Exception code: 0xc000027b
    Fault offset: 0x000fb152
    Faulting process id: 0x1418
    Faulting application start time: 0x01d0227a62078008
    Faulting application path: C:\Program Files\WindowsApps\SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c\Template.exe
    Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
    Report Id: 9fbff746-8e6d-11e4-a383-c0cb38d6092f
    Faulting package full name: SegaNetworksInc.56538047DFC80_2.0.0.0_x86__as33fap47kd3c
    Faulting package-relative application ID: App
    Apparently it has something to do with remote procedure call. When I open the other game, I get same errors as the above, the only thing which has changed being name of the app.
    Graphics shouldn't be a problem since these games have ALREADY run once, but not now, and I have other heavy-graphic games like Asphalt 8 Airborne which still WORKS.
    I've also tried re-installing but in vain, duh. Looking for help badly. I'd appreciate any help.

    Sorry. Those two links too didn't work. I did all that was instructed in them. However I really appreciate your effort in solving my problem.
    I checked the event log in the path which you asked me to and got this
    Activation of the app SegaNetworksInc.56538047DFC80_as33fap47kd3c!App for the Windows.Launch contract failed with error: The remote procedure call failed..
    And a detailed view
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" />
    <EventID>5961</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>5961</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-28T04:44:28.735933800Z" />
    <EventRecordID>71148</EventRecordID>
    <Correlation />
    <Execution ProcessID="1060" ThreadID="5520" />
    <Channel>Microsoft-Windows-TWinUI/Operational</Channel>
    <Computer>Amit</Computer>
    <Security UserID="S-1-5-21-66860032-2800664797-2745505841-1010" />
    </System>
    - <EventData>
    <Data Name="AppId">SegaNetworksInc.56538047DFC80_as33fap47kd3c!App</Data>
    <Data Name="ContractId">Windows.Launch</Data>
    <Data Name="ErrorCode">-2147023170</Data>
    </EventData>
    </Event>
    Can the error log be of some help?

  • Scheduled job keeps hanging after sveral days

    MII experts,
    We are using MII 12.0.8.  I have several scheduled jobs.  Those that run once every day never have any problem.  However, I have one that runs every 10 minutes keeps hanging after running for 3-4 days.  I have to stop and start to kick it off again if that happens.  When it hangs, it appears it is still in running state but it never finish.
    Have anyone seen this problem before?
    Thanks.

    We are running MII Version 12.1.5 Build(91) and have noticed jobs in the schedule that are running but are obviously not doing anything.  These jobs are user to trnsfer files around our site via ftp.
    MII gives no error or indication that the job has failed so we know nothing about these problems untill an end user complains about their file transfers not working.  As we are a 24 by 7 site this involves calls to aur support people at all hours.
    We have asked SAP for help but they require a Step by Step method to duplicate the error.  As this is a very intermitant problem that we have not been able to reproduce on demand this request has been ignored by SAP.
    We have many schedule jobs that run once per minute.  Slowing them down more would have a bad impact on the usefullnes of the transfers.
    If anyone gets an answer to this issue we would love to hear it.

  • Lightroom CC will not open after splash screen. Adobe suggested fixes don't work. Can't find a damn phone number to call them.

    Adobe fixes do not work. Can't find a tech phone number.

    Robert,
    I'm sorry you are having troubles. Did you try both option one and two in this link:
    Lightroom doesn't launch or quits automatically after splash screen
    If those don't work, feel free to go to the contact us page and then click the "Still need help? Contact us." button for support.
    Pattie

  • App store keeps crashing after trying to update to latest 10.8.3, what can I do I can not reinstall it from anywhere!

    App store keeps crashing after trying to update to latest 10.8.3 update ,
    what can I do I can not reinstall it from anywhere! Everything runs so slow!
    It is reaally frsutrating trying to find the app store in apple's site can anyone pinpoint to where can I download it again and try to get to work?
    Thanks

    Try the Combo update from the Apple Support page - http://support.apple.com/kb/DL1640.
    Good luck,
    Clinton

  • Premiere Pro CC hangs on splash screen  "loading ExporterQuicktimeHost.bundle"

    Premiere Pro CC hangs on splash screen  "loading ExporterQuicktimeHost.bundle"
    This happened before when I had CS6. I'm now using CC and haven't had problems until now. I again get the hang up while loading. Previously I trashed the loading ExporterQuicktimeHost.bundle file and this solved the problem.
    I tried to contact support. I thought my subscription to CC included support, apparently not.
    Anyone else have this Problem?
    Brian

    Thanks for the response Kevin.
    I tried repairing permissions.
    I recently installed OSX 10.8.4 but I've been succesfully using PP since then. PP is up to date v7.0.1
    I have read the other forum posts on this.
    Again, this problem cropped up using PP CS6, but I was able fix it using this procedure:
    1. Go to Applications
    2. Go to Adobe Premiere CS6
    3. Right click on the application and click on “Show Package Contents”
    4. Go to Contents –> Plug-ins –> Common
    5. Move the following files to the desktop: ExporterQuicktimeHost.bundle and ImporterQuicktimeHost.bundle
    6. Restart Adobe Premiere CS6 and it will successfully open up
    This no longer fixes it.
    I desperately need to get back to work.
    Even though I feel Adobe support should be included in a CC subscription, I'm considering purchasing Adobe Bronze support with a max wait time of 4 hours and only alloted phone calls for  $175
    thanks anyway

  • Splash screen image

    How do I change the splash screen image in Photoshop elements and premiere elements.

    Thanks for the replies...
    I wasn't sure how a loader class would know if the image was loaded, since media tracker seemed to think that it was already loaded.
    I hadn't considered the AWT since sun usually pushes swing and "lightweight" components. but a quick search found an AWT splash screen implementation that solved my problem. In the code they use media tracker also.
    below is a link to the AWT splash screen implementation incase others are interested:
    http://developer.java.sun.com/developer/qow/archive/24/

  • The DPS App Builder keep asking me to actived the Single Edition even being a Creative Cloud Member.

    I'm having problems to active the Single Edition. The DPS App Builder keep asking me to actived the Single Edition even being a Creative Cloud Member. What should I do? Am I missing something?
    Tks,

    You may have already resolved this, however for benefit of other members:
    Follow the troubleshooting steps mentioned in this article and make sure you click on 'Create App' from Folio Builder Panel once you follow all the steps:
    http://helpx.adobe.com/digital-publishing-suite/kb/dps-ccm-users-get-activate.html

  • 10.6 -- All Office 2008 apps hang at splash screen. FontCache Tool runaway

    Did an upgrade of 10.5 to 10.6. Nearly everything works fine. Can't launch Office 2008. All apps hang at their splash screen; usually at Optimizing Font Menu Performance.
    Once an app is opened, in Activity viewer you'll find a process called FontCache Tool using >90% of the CPU (on my Core Duo MBP at least, YMMV). I suppose it's saying a lot about 10.6 that the computer is completely usable with that runaway process. Even after forcing the office app(s) to quit, Font Cache Tool stays running until it's killed manually.
    I have yet to find out if FontCache Tool is an Apple or MS process. I think it's microsoft.
    This happens under multiple users.
    This happens after reinstalling Office.
    This was an Office 2008 upgrade from Office 2004.
    After reinstall, and installing Rosetta, office 2004 will run, but office 2008 will not.
    Office 2008 is 12.2.1.
    I am running FontAgent Pro for font management, and so font book sees certain activated fonts as duplicates. (Validate fonts shows duplicate warnings but no errors). FontAgent Pro 4.0.3 is listed as Snow Leopard compatible. So is Office 2008.
    I have yet to do a clean SL install, which I'm guessing will fix it, but I'm curious if there is a sub-sledgehammer approach, or if I am the only person with this issue.
    Other probably irrelevant facts include that the computer is bound to both Active Directory and OS X OpenDirectory servers. Open Directory is running on Leopard 10.5 Server. It does have some managed preferences, including those for Office (e.g. to set default to .doc rather than .docx) but the situation persists even after removing those managed preferences.
    Normally really specific problems are easy to isolate and solve, but I'm at a loss.
    Any help appreciated
    keppie

    Hey i think i figured it out.
    Had the same prob. 10.6 12.2.1 entourage hanging.
    Renamed FCT, instantly prompted that a font was corrupt. Removed the corrupt Font: KufiStandardGK.ttf << this just happened to be my one corrupt font.
    A little troubleshooting i did leading up to this, I read your post and my situation was the same. I use Linotype X to manage fonts. I disabled all but the minimum fonts (i moved them into a folder font_trouble in the same folder)
    I also deleted every office pref/plist setting i thought relevant to startup which triggered the microsoft setup assistant (watched via the console app) and it ran through its check and then immediately the fontcachetool started and went awol on cpu time. Once i killed it--during the starting up of word and entourage... timing may be unrelated but i did them at nearly the same time.
    Ps. Your post was extremely well written and I apologize for my stream of consciousness, less than stelllar response... hope this helps if not feel free to ping me for more details on what I did...
    Good Luck.. All my office apps are running normally now.

  • CS5 Premiere, After Effects, and Encore hang on splash screen - Solution

    I just installed Production Premium CS5 on a Windows 7 64 bit system. The install went without a hitch, but when I attempted to start Premiere, After Effects or Encore, they would all hang at some place with the splash screen showing. I spent 2 hours on the phone with Adobe and they never solved the problem. They had me uninstall iTunes and Quicktime, upgrade my nVidea driver and upgrade to a newer version of Quicktime. None of this made a difference and at that point I realized they were not going to fix my problem. The first woman was an idiot and the guy I spoke to next was a lot better, but no solution. Premiere was hanging when loading the Quicktime plug-ins.
    Then I had an Aha! moment. I shut off User Account Control, rebooted and then everything worked. I could also get the programs to work with UAC on if I changed the shortcut to "Run as Administrator" but then there would be a UAC prompt. By the way, I was running as a user with full administrator privileges.
    I am astounded that Adobe has never encountered this problem before and did not have an immediate solution. Once again, Adobe Tech Support has continued to provide pathetic tech support.
    Steve

    The plug-ins that were involved in the hang on the splash screen were:
    ExporterQuickTimeHost.prm
    ImporterQuickTime.prm
    The splash screen would hang for 5 minutes on each of these and then if PPro started it would only be a plain white window with the Menu Bar and then there would be no further response.

  • Windows 7 Imag hangs at splash screen

    I'm having an issue getting an image to complete successfully on a HP 635 laptop.
    The image I'm using was created on a VM and it's used on other laptop/desktops successfully.
    The process works find until the laptop reboots and the windows splash screen comes up. And at that point it does not proceed any further.  Shift F10 does not switch me to the command prompt so I can't check log files or make any registry changes that
    might correct the problem.  If I power off the unit and go into command prompt safe mode I see that it load drivers until it gets to afcmx64.sys then stops.  I have tried renaming this file suspecting that there maybe an issue with it but the boot
    up doesn't work as it complains that the file is missing.   I can however, install windows 7 from a CD without issue.
    I have checked this form and searched the internet but have not found a match for my issue. If anyone has gone through this and has a fix for it I would appreciate you help.
    thanks
    Kris Da San Martino

    Hi Kris,
    I assume you are using the latest version of MDT 2013 and Windows ADK 8.1 update1.
    WinPE 4.0 and 5.0 can cause the Windows Splash screen to hang, due to outdated hardware support. If available, perform a BIOS update and try to run the deployment again.
    Another viable option, could be driver selection and targeting. Please make sure that your laptop only receives the drivers that are intended for this particular model, and make sure no VMware or Hyper-V drivers are targeted to the machine. (this can also
    be seen in the bdd.log).
    Deployments are especially susceptible to storage drivers, the numerous times I've seen the "iaStore.sys" error on the MDT forums is out of proportion, all due to bad driver management.
    If you need so guidelines on driver management, please check this site: MDT 2013 Lite Touch Driver Management
    Cheers!
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • Dreamweaver4 Hangs at Splash Screen on First Use

    I recently moved to a new computer with 10 terabytes of hard
    drive space and 4 gigs of ram running winXP2 w/sp2.
    The computer itself is a generic HP Workstation XW4200 with
    an old ATI FireGL graphics card - fairly vanilla.
    I installed Dreamweaver4 (yes, DW4 is old but I know it's
    quirks and limitations well and
    I got the "educational version" free at school so call me
    cheap, but anyway..)
    then tried to start it up for the first time.
    Just past the registration screen it hung at the splash
    screen for a loooooooooooooooonnng time (over 15 minutes) and I
    figured it was permanently locked up so I shut it down, rebooted,
    and tried again with the same result.
    I uninstalled and re-installed the program, same result.
    I figured maybe something in Windows was conflicting so I
    took an hour to do a reinstall of a totally clean version of winxp
    sp2 (with nothing else installed).
    After installing Dreamweaver 4 for the third time it still
    hung indefinitely.
    Finally I started googling around and found an obscure
    reference on a Linux forum about installing DW4 under wine and
    having it hang on initial startup while scanning all drives and/or
    looking for Internet Explorer.
    So I booted up WinXP in Safe Mode, and set the compatibility
    properties to run in Win98 compatibility mode, and tried starting
    up dreamweaver.exe yet again.
    The cursor goes into hourglass mode for 10 seconds as the
    splash screen is displayed, then returns to a normal cursor except
    when passing directly over the splashscreen.
    Out of curiosity I started a small notepad window and dragged
    it momentarily in front of the dreamweaver splash screen window and
    when I moved it outside the splash screen window the image of the
    notepad window remained --meaning the splash screen was too busy
    doing something else to allow a window refresh.
    This lead me to focus on a very busily flashing led light
    signaling activity for my hard drive array.
    It was very busy blinking away even though I shut down
    notepad and nothing else was running except dreamweaver (I even
    checked Task Manger to make sure no process/thread that involved
    the hard drive...like a search indexing..was happening --but
    dreamweaver was the only thing banging away at my RAID collection
    of internal hard drives).
    So I decided to let it run while I watched a TV show and 47
    MINUTES later the rest of dreamweaver finally surfaced!!
    Was it searching for Internet Explorer?
    ..or maybe indexing drives/directories for the Site
    Manager..who knows?!
    But after saving an initial default site and restarting,
    dreamweaver took less than 15 seconds to load after that.
    To all those running Dreamweaver 4 under WinXP with
    multi-terabyte raid collections be warned!
    I doubt Adobe will issue a patch around this issue at this
    late date but I know I'm not the only one still running DW4 and
    after searching for hours in Google I found little or no
    documentation for this particular issue so let this thread be it .

    Now then Joshua Weeman,
    it appears you have fallen foul of one of the first rules: "Never buy top of the line hardware". Get the middle range and your'e in tried and tested territory. Same goes for software. FCP 2 is a beta to all intents and purposes, Color is a fresh port of Final Touch, and again, is a beta program. Spending loads of money on gear does not mean you will get flawless workflow, it just means you spent a huge wad. You can not, in all reasonableness, blindly believe the claims of vendors, even the fine folks at Cupertino ['send to' commands anyone?], they all tell fibs. All software has it's dark nasty little secrets, look up Captain Mench and his fine tutorials to find out more. With the system you have right now you are sorted for years of fun, time to start reading the manuals and the small print, All the information you need is within ten feet of where you are sitting and these fine forums contain anything that isn't.

Maybe you are looking for