App Builder/Run Time Install Broke?

I have full up version of LabView 5.1.1, running on Win98.
I went through the Application Building Example on page 12 of the
Application Buidler release notes.
I then installed the sample app on another Win98 box. The application
installation went OK until it ran the install for the LabVIEW runtime.
Then I got the following error:
"Setup Initialization Error
Setup requires a different version of Windows. Check to make sure that
you are running Setup on the Windows platform for which it is intended.
Error 102."
I also get this same error if I run the LabVIEW runtime install
directly.
As I said, both machines are Win98. I'm stumped. Any ideas?
Mike T

I am not sure if this is your exact problem but you might try it . I found
with the run time in 5.1 would not install properly . On the target machine
I did a runtime engine install from the APP builder disk , not from the 5.1
disk . Then things seem to get sorted out after that . I still haven't been
able to do a stand alone disk that installs the runtime engine and
application together yet. More for the lack of trying after I got a work
around (I hope?) . That was with win95 and 5.1 , not sure if the same sort
of thing will be true for 5.1.1 and win 98.
Hope that helps
"Mike T" wrote in message
news:[email protected]..
> I have full up version of LabView 5.1.1, running on Win98.
>
> I went through the Application B
uilding Example on page 12 of the
> Application Buidler release notes.
>
> I then installed the sample app on another Win98 box. The application
> installation went OK until it ran the install for the LabVIEW runtime.
> Then I got the following error:
>
> "Setup Initialization Error
>
> Setup requires a different version of Windows. Check to make sure that
> you are running Setup on the Windows platform for which it is intended.
>
> Error 102."
>
> I also get this same error if I run the LabVIEW runtime install
> directly.
>
> As I said, both machines are Win98. I'm stumped. Any ideas?
>
> --
> Mike T

Similar Messages

  • Application builder-run time error

    I cannot run my exe file I have always the following message , see attachment.
    What can be the problem?
    Attachments:
    run-time engine error.jpg ‏42 KB

    Is the run-time engine installed? A LV EXE can not run without the RTE.
    When you build an EXE, you have the option to create an installer, which will also install the RTE. If you build an EXE with no VI defined, it should build an installer with only the RTE.
    Alternatively, you can try looking for the RTE installer on your LV CD or on this site.
    Try to take over the world!

  • App Builder won't install - have tried all recommended fixes but still fails

    Hi all,
    I have read the similar issues others have had installing app builder and tried the suggested fixes, but am still having trouble installing.
    I have downloaded the latest version of App Builder (32.4 I believe), and am running Mac OS X 10.7.5. When I try to install i get the error "Sorry, an error has occurred. The application could not be installed because the installer file is damaged. Try obtaining a new installer from the application author."
    Just out of interest, I tried installing the same file on another Mac (running OS X 10.10.2) and installed without issue. So the installer file would appear to be fine.
    According to the system requirements, my 10.7.5 system should support the install, so I am not sure what else to try.
    Thanks, Louise.

    Ok. Please call enterprise support for assistance with this then. You can find contact information by logging into http://digitalpublishing.acrobat.com/ and looking in the bottom middle of the screen.
    Neil

  • Building run-time command in Forms 5

    How do I build a command syntax at run-time in Forms 5?
    E.g., I want to call a stored procedure from a trigger in a
    Form. But the name of the stored procedure has to be selected
    from a table at run-time.
    null

    Use an errorpage which can print the stacktrace to the response.
              Sha Liu wrote:
              > I was annoyed but this weird message of weblogic for two days:
              >
              > From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
              > 10.5.1 500 Internal Server Error
              > The server encountered an unexpected condition which prevented it from
              > fulfilling the request.
              >
              > And there's no exceptions or any error messages in the stack trace of server
              > console.
              > Then I tried to write a simple JSP to test if Weblogic will properly display
              > some run-time exceptions.
              > My JSP is like this:
              >
              > <% Integer i = null; System.out.println(i.toString()); %>
              > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
              > <html>
              > </script>
              > <head>
              > </head>
              > <body>
              > test
              > </body>
              > </html>
              >
              > And I found it fails!
              > Is it a bug of weblogic or I need to configure something to enable the
              > catching the run-time exceptions?
              >
              > My weblogic is 5.1 applied SP5.
              >
              > Sha Liu
              Tom
              | Thomas Preston |
              | Vacation.com, Inc. |
              | Engineering Department |
              | 617.654.8432 |
              | http://www.vacation.com |
              

  • Template builder - run time error '429'

    Hi all,
    I'm getting a Visual Basic "run-time error '429' ActiveX component can't create object" in two separate environments. One is using Word 2007 the other Word 2003. The error occurs when I try to log into PI Publisher from Word. I can't find any info on this error. They are both 64 bit machines and I have the .NET 2.0 for 64 bit installed. Has anyone seen this?
    Thanks!
    Patrick

    Correct, you do not need Oracle client software installed. But, where does Desktop get installed? Under C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop. One of the folders therein is DotNetInstallFiles. Then, consider this:
    "With OLE DB .NET, applications can access the Oracle database from any .NET programming language.
    The provider now supports 64-bit Windows natively, including Windows x64 and Windows Itanium."
    I would venture to say that older versions of Desktop were probably not tested on 64-bit PCs because who uses Office on 64-bit Windows? Even in the certification guide, it states that all possible combinations of J2EE compliant engines, databases, OS, etc have not been tested. Digging into the BI installed files, you see ADO-related files.

  • Segment Builder - run time error

    Hi  All,
    I am working in sgment buillder  in CRM 6.0, I created TG and when i try to open it in GUI it throws run time error "CREATE_DATA_UNKNOWN _TYPE " . i understood this is ABAP runtnime error.
    Kindly give your valuable suggestions.
    Warm regards,
    Sathish Prabhu.R

    Hello,
    Check The reason for the dump could be because of the custom badi implementation. check your badi implementation for  CRM_MKTTG_SEG_MEM_EX.
    It has  two methodds
    IF_EX_CRM_MKTTG_SEG_MEMBER_EX~GET_TG_MEMBER_STRUCTURE and
    IF_EX_CRM_MKTTG_SEG_MEMBER_EX~GET_TG_MEMBER_STRUCTURE_REL
    For these methods, check whether you are passing the structures.
    Thanks
    Raja Pamireddy
    CRM Marketing Forum Moderator.

  • DPS app builder - download and install IPA problem

    Hi, Fellows
    Please, I would like to know if anyone more have seen this problem.
    1 - I created all new certifies - p12 and mobile provision
    2 - I created a new app from scratch
    3 - At first time I managed download and install the IPA regulary
    4 - But, If I need edit the app, I can´t download the IPA anymore - see the image attached
    Any tips?
    I created new certifie twice already, then don´t tell me to create new ones again, please!
    OS X Yosemite - 10.10.2

    Did you click the "learn more" link and follow the instructions on that page?
    Neil

  • 10Gr2 Run Time Install

    Hi, I have installed OWB on our unix server and I'm trying to install the runtime environment. Previously (and according to the current documentation) this would require running runtimeinst.sh but I cannot find this file in the entire OWB_HOME
    Is this an install issue or has the runtime deployment changed?
    Cheers
    Al

    Looks like I was reading the 10.1 documentation......... great.
    Any tips on how the install should proceed will be welcomed.
    Cheers
    Al

  • How to include LabVIEW Run-Time in executable file ?

    Hello folks,
    I have an application that need the user to simply calling executable file without setting up LabVIEW run-time because my executable file will be posted in LAN and anyone can run it remotely. What should I do? Any help very appreciate...
    Thanks so much

    You have to have labVIEW run-time installed on your computer in order to run a LabVIEW programs (vi or exe). What you can do when you distribute an exe file is to create an installer which lets you install LabVIEW run-time and create a menu item (in Windows) in the Start>>Programs menus. Then you can distribute the whole package and after running the installer, LabVIEW run time as well as the exe is installed.
    You can do this in the installer settings of the Application builder (when you create the .exe file). Go to the "Advanced" section. There you can add the LabVIEW run-time Engine to the installer.
    One other possibility you can do if several people want to use the programm over Lan is to use the LabVIEW webserver. You can run a programm somewhere on the
    network and other people can open the front panel in their Webbrowser. But maybe that's not exactly what you want. ??

  • Run Time from a USB stick

    Hello,
    I'm working on a simple VI using the SMTP send file function, which will be run from a USB stick. The executable works well save for that it needs to run from the stick on computers without Run Time installed. I have Run Time 8.5 installed on the stick, in the X:\Program Files\National Instruments\ folder, but the application can't find the RTE to execute. It needs to find it automatically, since several people (all untrained in LabView) will be inserting the stick into various remote Windows computers in order to send the emails and attachments. Another potential problem is the varying drive letter assignment given to the USB stick, but that doesn't seem to be the current problem. Any suggestions?
    Setup:
    WinXP 
    LV 8.5 
    Thanks,
    Mark 

    In some cases it possible, if you not using packages which should be installed, like IMAQ, VISA, etc...
    But do not install RunTime on the memory stick (because some paths will be stored in the registry - you may get troubles with your PC when stick will be removed).
    Try to do following (without guarantees, but may work):
    1. Copy <Program Files>\National Instruments\Shared\LabVIEW Run-Time\x.x directory to your USB stick (x.x - LabVIEW version which was used for your project)
    2. Place your builded application into this directory on USB stick (executable should be located at the same place where lvrt.dll located)
    3. Try to start it on the PC without RunTime.
    hopefully it helps,
    Andrey.

  • Can Run-Time Engine 6.0 runs on Window XP?

    I have a 6i LabView application and I did build Run-Time Engine 6.0 for that! My boss asked me that if our customer has Window XP and does not have LabView 6i whatsoever, with Run-Time Engine 6.0 install, will have any problem?

    As this Compatibility article states, you won't have to worry about.
    Good Luck

  • LabVIEW 8 run time

    Am upgrading from 7.0 to 8. Is Run Time compiled with the .exe during
    the build? Does Run Time install with the .exe on the target machine?
    Are there any hoops to jump through during the build, or target
    installations?
    Instructions for 8 Run Time seem to be slim.
    newbieDLD

    The run-time engine isn't really compiled with your built application since it's a separate program. You can, however, include the installer as part of your build so that when you deploy your application you will also distribute the run-time engine with it. From the LabVIEW documentation:
    If you use the Application Builder to build an installer for an application or shared library, you can add the LabVIEW Run-Time Engine to the installer build. From the Additional Installers page of the Installer Properties dialog box, place a checkmark in the NI LabVIEW Run-Time Engine checkbox in the National Instruments Installers to Include listbox.
    Generally, the run-time engine is a separate install, and the installer for it is included on the LabVIEW CD, or you can download it from NI: http://digital.ni.com/softlib.nsf/websearch/1F1EBEA6D03A67E6862570A400531F97?opendocument&node=13206...
    -Saverio

  • DAQmx Run Time 5 + LV Application Support

    Hi
    I want to use the DAQmx RT 5 installer for a smaller foot print install.
    The only other thing I need is support for LV 8.x
    But I don't want to go to a bigger run time install if I can help it.
    Is there any installer available that installs all the LabVIEW VIs needed for DAQmx?
    If I had this, I can keep the size down on my installer.
    I tried moving files manually but it didn't work, I am guessing that it registers it somewhere? 
    Is there an installer avialable or does anyone have a work around?
    Cheers
    JG 
    Certified LabVIEW Architect * LabVIEW Champion

    Thanks guys for your posts, however I think you have misinterpreted my original post, so I will try again: 
    Obivously I need the LabVIEW run time installed. But I am talking DAQmx - when you install DAQmx you need to install the main "Run Time", but you also need to install the VIs that you use in your application otherwise it will be broken. When you create an exe these are not included in the build. There are in VI.lib, but they are not in the LabVIEW 8.x Run Time they are in the DAQmx Run Time. I am trying to use the smallest Run Time possible to minimise it's footprint. However, you have to go to the big one to install ADE support. If I could use DAQmx RT 5 + get my hands on a seperate ADE installer for LabVIEW (I imagine this would not be large in size) it would be SWEET!
    I am pretty sure the ADE DAQmx VIs get installed here - C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\DAQmx and that location is used for the Run Time as well. I am at work but I have been playing around at home so I can't check right now. I tried to copy and paste them, or include them in my installer, it does not work (I am thinking something is registered when using the NI installer or I am missing something)
    E.g. The Run Time 5 does not include the following: 
    NI LabVIEW SignalExpress
    Application development environment (ADE) support for LabVIEW, LabWindows/CVI, and Measurement Studio
    The DAQ Assistant
    NI-DAQmx documentation
    LabVIEW Real-Time support
    Measurement & Automation Explorer (MAX)
    Not having ADE support for LabVIEW means that your exe will be broken. I don't need all the other stuff just whatever is in DAQmx RT5 and ADE support!
    I am looking for a small install (from NI?) that could do this. Is this available?
    Cheers
    JG 
    Message Edited by jg-code on 07-01-2009 08:45 PM
    Certified LabVIEW Architect * LabVIEW Champion

  • DPS App builder for Android Devices

    Hi! i make a new app for smartphone and i follow that link:
    http://helpx.adobe.com/digital-publishing-suite/help/building-android-apps.html
    i put every certificate and make all the steps with success!
    What do i do after that????
    I just have an app for tablet on Google play account..
    There are others steps to make to see the app on Smartphone playstore? because i can't see the app..
    Thank you  very much
    TKART staff

    The apps created by the web app builder run on both tablets and smartphones all the time. There's no "tablet-only" or "smartphone-only" version. If you upload this new .apk to Google Play instead of your current one it will replace the one there.
    Note that our native Android app only supports Android 4.0.3 and later. If your Smartphone is running an earlier version of Android then it won't show in the Google Play store listings when you search for it.
    Neil

  • LabVIEW 8 Run-Time Eninger on 2011 Startup

    Hey All,
    Weird issue here where the LabVIEW 8.2.1 Run-Time engine trys to install/configure itself everytime I start the 2011 development environment. Has anyone ever seen this?
    It quickly goes to a prompt asking for...
    "The Feature you are trying to use is on a network resource that is unavailable."
    Clock OK to try again or enter an anternate path to a folder containing the installation package 'lv82runtime.msi' in the box below.
    Why would it be asking for this at all? It tries to install itself 3-4 times before finally launching the development environment.
    Regards,
    Ken

    Hi Ken,
    That is odd behavior, there could be a corrupt file in you run time install. I would suggest repairing your LabVIEW 8.2.1 Run Time Engine. Refer to the document below for repairing NI software.
    How Do I Uninstall or Repair National Instruments Software?
    http://digital.ni.com/public.nsf/allkb/AC6ED75D3D93375686256E8E00245F0D?OpenDocument
    Tim O
    Applications Engineer
    National Instruments

Maybe you are looking for