App Controller and SCVMM connection issue

I have configured private cloud and installed the SCVMM server and App Controller Server separately.
When I am trying to add the VMM server to App Controller,
I am getting the following error.
Category: Critical
Description: Connection attempt to the target system failed.
Details: Category: Critical
Message: 1604–ConnectServerAuthenticationFailed
Description: You cannot access VMM management server scvmm.corp.usl.in.
Details: Category: Critical
Message: System.ServiceModel.Security.SecurityNegotiationException
Description: A call to SSPI failed, see inner exception.
Category: Critical
Message: System.Security.Authentication.AuthenticationException
Description: A call to SSPI failed, see inner exception.
Category: Critical
Message: System.ComponentModel.Win32Exception
Description: The target principal name is incorrect
Regards
FBM

Hi,
I am configuring a private cloud. I have installed the SCVMM server and App Controller Server separately.
When I am trying to add the VMM server to App Controller, I am getting the following error.
Category: Critical
Description: Connection attempt to the target system failed.
Details: Category: Critical
Message: 1604–ConnectServerAuthenticationFailed
Description: You cannot access VMM management server scvmm.corp.usl.in.
Details: Category: Critical
Message: System.ServiceModel.Security.SecurityNegotiationException
Description: A call to SSPI failed, see inner exception.
Category: Critical
Message: System.Security.Authentication.AuthenticationException
Description: A call to SSPI failed, see inner exception.
Category: Critical
Message: System.ComponentModel.Win32Exception
Description: The target principal name is incorrect
Thanks and Regards, Mukesh. This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click
“Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

App Controller and Clouds connect to or configure public/private clouds

Hi
i was wondering what kinds of clouds private/public can App Controller can connect to or configure and where can i find the list of the public/private clouds that it supports.
Thanks

App Controller can connect to the following clouds:
System Center Virtual Machine Manager
Windows Azure
Hosting service providers
I don't have a list of the Hosting service providers that have a compatible cloud, although I know a couple have previously posted to this forum. The service provider needs to be running System Center and in particular
Service Provider Foundation.
Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

Error in connecting App Controller to SCVMM 2012 R2

Hello All,
I have recently installed App Controller 2012 R2 on a new VM. We are already using SCVMM 2012 R2 with Update Rollup 4.
I'm logged-in on the App Controller website with the service account of App Controller/SCVMM.
Now when I'm trying to connect App Controller to SCVMM server, it gives the following error:
"Category: Critical
Description: Connection attempt to the target system failed.
Details: Category: Critical
Message: 553–RegistryInvalidValue
Description: The type or name syntax of the registry key value IndigoTcpPort under Software\Microsoft\Microsoft System Center Virtual Machine Manager Administrator Console\Settings is incorrect."
I'm correctly entering the complete FQDN of my VMM management server, and the default port: 8100.
Need help please.
Thank you.
Regards
Hasan Bin Hasib

Hi Hasan,
I haven't seen this issue before, but the following post provides information on checking the registry value:
https://wmoore.wordpress.com/2014/04/11/appcontroller-2012-r2-vmm-registration-error/
The usual caveats about editing the registry apply, including make a backup first.
Regards
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

My iphone 5 and ipad 4th generation having the same problem of connecting to wifi, cannot load app store and cannot connect to itune store... help !!

my iphone 5 and ipad 4th generation having the same problem of connecting to wifi, cannot load app store and cannot connect to itune store... help !!

Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo.

Database link and remote connection issues..

We have a sql script... Large script that we would rather not post here. The script connects through a dblink to a remote site at the beginning and gets thousands of records. We then process these records locally which takes around 40 minutes. The link is unused for that time. Then the same script attempts to connect again through the dblink and set a confiirmation flag. But this final confirmation step routinely fails. The script used to work fine when the confirmation was at the beginning of the script.
My understanding is that when you go out through a dblink it creates a session on the remote computer. The session stays active until the local proc ends or the session times out. Successive calls through the dblink from the same proc will reuse the same remote session? Is this true?
So, Is the inactivity period possibly causing this dblink connectivity issue? We put some test sql select statements in the script here and there selecting from dual at the remote site to test the link inbetween major proc calls. Sometimes even these fail. What do I have to do to keep this link active? Is this even my issue?
Like I said this script worked fine when the confirmation piece was at the beginning right before we start downloading files and basically no inactivity period... Now we download files and confirm at the end with a 40min to 2 hour inactivity between.
The remote site as well as the network claim that they are not dropping us... The only piece of information I can provide is that on our side SQLNET.EXPIRE_TIME = 10 and on there side SQLNET.EXPIRE_TIME = 0. I've read that others solved this issue by manipulating this value.
Here are some of the errror message we get in our script...
ORA-03114: not connected to ORACLE
ERROR at line 1:
ORA-02068: following severe error from DMVAIS
ORA-03135: connection lost contact
Edited by: Mark Reichman on Nov 25, 2008 12:47 PM
Edited by: Mark Reichman on Nov 25, 2008 12:57 PM

What version of Oracle?
What are the values of the following database parameters?
open_links max # open links per session
open_links_per_instance # open links per instanceAny chance you are exhausting one or both these parameter values?
Have you ran a check on the network connection between the two machines?
HTH -- Mark D Powell --

Customizing the App Controller Gui (SCVMM 2012 R2)

Hi everybody and thank you in advance for assisting! I also thank google and the Microsoft Forums for the amount of bandwidth I've burned through searching for solutions to this, lol.
I am trying to see if there is a way to customize the app controller gui as far as:
Remove from the left column: Clouds, Services, Library
Remove from the overview: Public Clouds, Hosting Service Providers, Common Tasks, System Center Blogs, Recent Forum Posts
Remove the links provided and add my own under: Online Help
I looked through the "C:\Program Files\Microsoft System Center 2012 R2\App Controller\wwwroot" directory, and edited some of the xml based files, but didn't really see any change in the site.
I did the same in the api directory "C:\Program Files\Microsoft System Center 2012 R2\App Controller\api"
as well with no luck.
Any ideas would be greatly appreciated. I have also attached a picture of what the ideal gui would look like.
Thanks again in advance!

Hi HG-Wes,
App Controller is a Silverlight application so all of the UI is defined in the .xap files.
There is no easy/supported way to make modifications to the App Controller UI.
If your focus is just on virtual machines, which is what it looks like from the screenshot, you may want to consider using the Windows Azure Pack for Windows Server which is an HTML based portal and therefore easier to customize.
Kind Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

Download and iTunes connection issues

As of recently, I have purchased numerous audio and video files from the iTunes store with no difficulty or connection issues of any kind. Though today, I attempted to download the Iron Maiden: Flight 666 movie, and had issues with my download. Though the file is downloading, it is taking an excruciatingly long amount of time. A 3.09 Gigabyte file, a file which might have previously taken me about an hour to download on my connection, now displays an estimated download time of 17+ hours. It has been downloading now for at least an hour, and only 9.5 Megabytes have been successfully downloaded. Now, I am experiencing difficulty accessing the iTunes store at all. An error message continually pops up saying that my connection has been lost and the download pauses, though I have checked my connection time and time again. I have even contacted my internet provider, Comcast, in hopes of solving my problem. My connection is good, though iTunes itself is the only thing giving me difficulty. I have gone through all of the steps that Apple has recommended, and have not had any success in attempting to download the file. Any help would be greatly appreciated.

Contact iTunes support.

BT Infinity and https connection issues

I have sporadic issues with https connections on my BT Infinity service.
I used to be on Virgin ADSL and had no issues.
I can also use a Orange mobile dongle with no issues if I switch to that when experiencing problems with BT.
Some example sites:
Dixons checkout pages
NatWest banking pages
Anyone else experience this?
Should I periodically reboot the HomeHub and VDSL?
Cheers,
Jason.

Can someone on Infinity kindly do me a test and visit https://upgrades.o2.co.uk/index.htm and tell me if it's darn slow for you too? It's not the site as I'm loading up VNC and connecting to a VPS in America and it's instantly loading. It'll definitely rule out traffic shaping if someone on Infinity can tell me either way.
Thanks you generous souls!!!

WAP2000 and iPhone connectivity issues?

I have several WAP2000 (Firmware 2.0.0.5), and while they work fine for PC's, iPhones, iPod touches cannot connect to them.
Well, they connect briefly, get an IP address from the router, and immediately drop the connection to re-connect again.
I have tried changing channels, eliminating all but one of the AP's, and so forth.
Has anyone else had issues with this firmware? I see posts where people are saying their iPhones connect up fine. This happens on versions 3.x and 4.x of the iphone O.S. It's not limited to one iphone or ipod touch; we've tried several.
If anyone else is running 2.0.0.5 of the firmware and they are having success with an iphone, can you please tell me your settings?
Thanks in advance!
--Greg

Greg,
I think I have the same problem but with a Blackberry Storm 2. (I posted in the last two days--Look for WAP2000 and Storm 2) I see the Storm 2 connect successfully to the WAP2000 but then never establish a connection to the Blackberry Enterprise Server (BES)...Necessary to do anything useful with a Blackberry device. A few months aga (Before I had my Storm 2) I had borrowed an iPhone for a week. During that time I tried to use my WiFi but it never seemed to work (ie Established a WiFi link but then couldn't do anything else with it.). Since I didn't have it long and WiFi wasn't the object of my testing I ignored the problem. Now troubleshooting my Storm 2 problem and realizing that other WiFi devices on my network have been experiencing issues (the Storm 2 appears to have been most impacted) it is very likely that the iPhone I borrowed was experiencing the same problem.
You can read my previous post but a quick summary--> When I used a packet analyzer (Wireshark) I saw that my router was issuing ARP address discovery broadcasts to the Storm 2's IP address but the Storm 2 was not responding. I had tested the same setup with a different wireless access point (Linksys WAP54G) and saw the Storm 2 properly respond (and the Storm 2 worked perfectly when connected to the WAP54G). I concluded that the WAP2000 was either not forwarding the ARP broadcast to the Storm 2 or it was not forwarding the Storm 2's response back to the LAN.
I created a work around the now allows my Storm 2 (and multiple other devices) to function successfully on the network. I have a Cisco ASA5505 firewall that has a ststic ARP table and is capable or proxy-arp (ie. It can respond to ARP requests on behalf of devices on the network). I simply created an entry for my Storm 2 and now it functions properly. I also had a laptop and an IP security camera that had intermittent connectivity issues. When I added static ARP entries for these items their problems disappeared as well.
I don't think this is a settings issues so I am hoping Cisco confirms this as a bug and issues a firmware update.
I hope this helps.
--Gerhard Wittreich

FMS3 and FCS Connectivity Issue

When FCS and FMS3 connection takes place, i get following
error in FCS's Machine regarding the FCS crash.
"Macromedia Flash Comminication Server MX 1.7.1 r98 has
encountered a problem and needs to close. We are sorry for the
inconvenience.
Error signature
szAppName : FlashCom.exe szAppVer : 1.7.1.98 szModName :
js32.dll szModVer : 0.0.0.0 offset : 000033c1"

This is just a guess as I'm not a Transall user. My first guess is that your DSN will need to be made using the 32-bit ODBC driver. As a default, using Windows 7 or later, you created a 64-bit source.
To create or modify a 32-bit DSN on 64-bit Windows, you must run C:\WINDOWS\SysWOW64\odbcad32.exe. You may find it useful to create a shortcut to this on your desktop or Start menu if you access it frequently. I believe the interface is exactly the same after that.

CC 2014 Adobe suite and iCloud connection issue

Ever since I bought the new iCloud and Abobe Creative suite, I've had issues. The apps were working up until now, but the iCloud connection never worked. It kept scrolling. I noticed that when I would shut down my computer and relaunch, it would launch all the programs I had open and create a scrolling issue. Mind you, I still use the old CS5 programs and I am mainly using the CC for Dreamweaver right now. I've been have to force quit things in start-up. So, I don't know if this has to do with the iCloud issue or not.
The main thing that has happened today, is that my apps don't work now. It's telling that I need to change my firewall settings. Why now? Anyway, I'm frustrated for two reasons. I subject to working on things based on internet connection. This is why I keep my old apps. But, now I'm frustrated because of what is happening on start up and the fact that I can't my Dreamweaver app.
I'm in the middle of a project. Any suggestions would be greatly appreciated.
Lesley

First, this is not Apple... it is Cloud, not iCloud
Second, for download problems, please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

App download and music download issues

I have started having issues with downloading previously downloaded apps and some new music. I have tied the log out of account, turn off and sign back in but it still does not work. I do them all individually as well so there is no paused items. This is happening on iPad 2, iPad mini and also on my MacBook. It either says network connection refused or cannot be downloaded at this time. Most apps download fine but then 1 or 2 will have an issue. This also happens after syncing with the MacBook. They will not download even when synced. Also, the same happens with some new items of music as well, I can download an album, come back an hour later, try a new song and it won't download!!!!!!!
Please help as this is very frustrating as an intermittent problem

Update...
For "grins" I just un-checked "Sync Music", and synced my iPhone... Other Data went to zero. Re-checked "Sync Music" and synced, and only had 250Mb of Other on the iPhone. After a full sync with 7gb music, the Other memory number is back up to 2.23gb...
Interesting...
Bob

Ipod Touch 5 random restart and wifi connectivity issues

Good day to you sir...
My Ipod Touch 5G 32gb model white has issues towards random restart and wifi unstable even though I have full bars and a working wifi internet connectivity
Here are details that might help on my case..
I bought the Itouch 5 on singapore exactly around January 2013 registered on January 1 on Apple web for warranty.
Around early Feb, i experienced some random restart and I tought it was just some bug after update, it was gone and came back around late march with some wifi issues, but not regularly, only around certain cases on using it for a long period of time. I am still experiencing it now.
The device never experienced drops,dents, nor water damage.. it is protected by an Ozaki case and screen protector bought in a Mac store. Never been Jailbraked. I used it for music, videos and gaming purpose. I have 3 idevice other than the Itouch (iPad 2, Ipad w/ retina display and Ipad Mini with no occuring problems both updated to ios 6.1.3 (so is the itouch). I would like to know what course of action should I take about this problem. I have restored the Ipod Touch 5G via iTunes but the problem still occuring both wifi and random restart. I bought the device on a legit mac authorized dealer. (Power Mac i think) in Singapore, but I live in General Santos City, Philippines. I would gretly appreciate if you give me exact details what course of action should i take.
P.S. my Ipod Touch 5 is running on iOS 6.1.3..

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Windows 7 and internet connection issue

I am having a problem connecting to internet on Windows 7 OS. I have a Macbook that installed Windows 7 on Bootcamp. When I connect the DSL wire to my computer in dormitory it connects automatically. But when I go to somewhere else it doesn't connect. I also tried to connect using IP address which consists of 4-5 rows of numbers. Unfortunately, I cannot find the tab where I can enter these IP address numbers. So I was wondering if there is something wrong with my Network Driver (or may be it is missing some networking drivers).
The main reason I want to connect to the Internet in Windows system is because I need to activate Keyshot (which requires internet connection and it works only on windows platform). My teacher said if the IP system is different on the Windows installed Macintosh, then it may not activate the product. So I was wondering if my Windows networking system works differently from Windows system on normal PC. If so how to fix this connection problem. Sorry if my question is too complicated.
But again, I am able to connect on my windows at home. But this connection is still not allowing me to activate the software. As I understood, this program requires normal internet connection of Windows. I don't know what is wrong with my computer.

Thanks for the direction. Did you mention the Bootcamp forum within this Apple.com or are you talking about a forum that exists outside of apple.com (maybe some website solely devoted to Bootcamp or windows issues)?

Windows 8 And Random Connectivity Issues

Hello,
I just relatively recently got a laptop with Windows 8 on it. I hadn't used Windows 8 before, but while some features are good, others are not.
Notably, when I put my computer to sleep and return from sleep, often times I need to unplug my ethernet cable or my pages won't 'load' because the network is unavailable. But my old laptop, with Windows 7, will be able to access the internet just fine and
so it doesn't seem to be an ISP issue.
I thought it may be a Google Chrome issue, but IE and Firefox have similar issues, pages hang for a long time and eventually display 'page cannot be displayed' or some variant.
As I said, sometimes if I unplug and re-plug my ethernet cable in, it resolves it, at least when I return from hibernation.
Unfortunately, two or three times before, and now another time today, I'll be working on my computer and I'll go to a website and it will just hang, then if I try to reload or reload any other pages, I get a similar issue, the network isn't available.
I tried unplugging/replugging, I made sure the connection was fine by using my old laptop, and I even tried putting the computer to sleep and back, and closing Chrome and reloading, none of that worked. What did work was completely restarting, but this is
inconvenient.
I'm just wondering if anyone else has encountered these issues and if there are easier/more permanent fixes to them? They aren't /terrible/ but they are inconvenient and annoying.

Hi,
Have we tried the network troubleshooter?
Open the Network troubleshooter by swiping in from the right edge of the screen, tapping
Search (or if you're using a mouse, pointing to the upper-right corner of the screen, moving the mouse pointer down, and then clicking
Search), entering network troubleshooter in the search box, tapping or clicking
Settings, and then tapping or clicking Identify and repair network problems.
For more information regarding wire and wireless problems in Windows 8/8.1, we may first take a look at the following tutorial:
Wired and wireless network problems
Best regards
Michael Shao
TechNet Community Support

App Controller and SCVMM connection issue

Similar Messages

Maybe you are looking for