App Download manager had problems installing Microsoft C++ 2008

I used download app for Creative Cloud - illustrator / Photoshop / Premier / After Effects all had this error log - should i worry?
They seem to be running OK
Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DW016 ...  -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 2 error(s), 2 warning(s)    WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0  WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0  -----------  Payload: {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 -----------  ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Josh\AppData\Local\Temp\{40299384-E9DB-47B4-B4F7-52C767EF7421}\Prelude_1_LS7\Adobe Prelude CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com    ERROR: DW050: The following payload errors were found during install:  ERROR: DW050:  - Microsoft Visual C++ 2008 Redistributable Package (x64): Install failed

I think the solution is present there itself ,
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64).
Please try installing it by double clicking on the executable at
"C:\Users\Josh\AppData\Local\Temp\{40299384-E9DB-47B4-B4F7-52C767EF7421}\Prelude_1_LS7\Ado be Prelude CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe",
or
download and install the
latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com

Similar Messages

  • HT4009 im trying to do an in app puchase and it says go to support at itunes - i dont have any restrictions and have not had problems installing apps????

    im trying to do an in app puchase and it says go to support at itunes - i dont have any restrictions and have not had problems installing apps????

    Well that was a jerk reply, thanks for no help 'gdgmacguy'. I have the same problem and have already contacted support regarding the matter. Hang tight Scottyp, I will post any resolution I find or receive from support for us and others coming here for help.

  • When I charge my iPhone and it subsequently syncs the phone I seem to loose some apps that I had previously installed.

    When I charge my iPhone and it subsequently syncs the phone I seem to loose some apps that I had previously installed. When I try to srinstall them the app store gives me a message that they are already installed

    When I charge my iPhone
    Tap the Settings icon just like you see in this image.
    Click the iPhone online user guide here >  http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Trouble Installing Microsoft Office 2008 10.8

    Getting a headache trying to find a clear answer on this -- if I can't install Office Entourage PowerPoint Excel on 10.8.3 in 2013, is it possible?
    I just did an Erase and clean fresh install of Mountain Lion 10.8.3 (late 2011 MacBook Pro).
    I have Microsoft Office Mac 2008 Upgrade (not worried about the Upgrade issue), however
    My installer is version 12.0
    To get to current 12.3.6 — I will need to run three updates manually (the Auto Update feature didn't work the  last time I installed under 10.7 so I expect to do the same under 10.8):
    12.1
    12.2
    12.3
    I read there may be a problem running the three service pack updates manually because they may not work in the Apple Store Auto Update Software Update routines....
    Has anyone done this or know of a clear source to confirm what to expect, how to install and update Office 2008?
    PLEASE ADVISE

    Figured out how to install Microsoft Office 2008 Upgrade 12.0 onto a fresh start-from-scratch clean 10.8x Mountain Lion install -- it is possible with no problems and here are instructions how to do it:
    Manually download the following updaters:
    Service Pack 1, 12.1.0: Office2008-1210UpdateEN.dmg
    Service Pack 2, 12.2.0: Office2008-1220UpdateEN.dmg
    Service Pack 3, 12.3.6 (or latest)
    Run the Office 2008 installer from the install disk.
    When the Upgrade prompts you for an eligible version, insert your full retail install disk, and point the updater to that disk's root folder — note my full retail Office 98 disk didn't work, but my Office 2004 full retail disk did the trick.
    Run each Service Pack as needed.
    After all are updates are manually ran, then run the Office software update.
    I can confirm Office 2008 installed on Mountain Lion and appears to be working as expected on my Late 2011 MacBook Pro, 10.8.3.
    Lanny& Barney-15E THANK YOU FOR THE CORRECT ANSWERS!

  • G5 with Panther (10.3.9) but I need to install Microsoft Office 2008!

    I'm working in a office where I use a G5 with Panther (10.3.9). I'm wanting to install Microsoft Office 2008 on this computer, however, it requires 10.4.9 or later, which I guess would mean an upgrade to Tiger? Anyone know a way to bypass this install, someone suggested possibly installing in Classic? Any help is greatly appreciated!

    The minimum requirements won't allow you to install Office 2008 on anything less that what it states. That's normally due to changes in later versions of the OS, or newer features that don't exist in older OS versions that the program relies on to run.

  • Creative Cloud App breaks Adobe Download Manager, doesn't install apps, now I'm unable open apps

    This has been the worst cloud app experience I've ever seen.
    First of all the CC app overwrites the Adobe Download Manager to the point where you'll never be able to go back to it again.
    I would normally be OK with this, but the CC app doesn't work and closes itself instantly, rendering it completely useless and unable to install any of the CC apps.
    After an hour and 20 minutes between being on hold, and speaking with support, I have no solution.
    I'm now at a point where I have no apps installed, and I can't install any new apps because the CC app doesn't work, and the Download Manager will either a) error if CC app isn't installed, or b) open the CC app if it is installed (which doesn't work, and instantly closes).
    Overall, it's a disaster

    Hey Jason,
    I'm wonder if it might help to start fresh,
    Uninstall any Creative Cloud programs
    Control Panel > Programs & Features (Windows 7)
    Control Panel > Add/Remove Programs (XP)
    Mac HD > Applications > Utilities > Adobe Installers (Mac OS X)
    Run the cleaner tool to ensure everything is removed
    http://www.adobe.com/support/contact/cscleanertool.html
    Reinstall the Creative Cloud desktop app from https://creative.adobe.com/products
    Reinstall applications
    It will be a lot of work but it will probably fix it.
    -Dave

  • Windows 8.1 apps downloaded during developer preview install in Chinese on RTM (MS requsted I post this here for script to fix this)

    Hello
    Ever since updating to the RTM version of Windows 8.1 on every PC I have updated and signed into using my Microsoft account whenever I try to install any 8.1 app I installed onto the developer preview version it will always install in Chinese which makes
    using the app impossible for me.
    This happens on all PCs I have updated/used including:
    Surface RT (Windows 8.1 RT)
    Surface 2 (Windows 8.1 RT)
    Dell OptiPlex 990 (Windows 8.1 Pro)
    Dell OptiPlex 790 (Windows 8.1 Pro)
    Sony Tap 20" (Windows 8.1 Pro)
    The language settings of the Microsoft store and all the computers are all set to UK English and as soon as I do a fresh install of the UK version of Windows 8.1 and sign into my Microsoft account then certain apps will always install in Chinese (when in
    the store it says you already own this app and can install it on this PC - when I do it is in Chinese. When the app has not been installed before or was not installed when I had the developer preview then it will install in English).
    This has been driving me mad for months and I previously posted this question back in October in the Office 2013 forums as I first noticed the issue with the OneNote app but it was never resolved:
    http://social.technet.microsoft.com/Forums/office/en-US/448670ae-4494-4a55-8cee-d9f1c9873db7/onenote-windows-81-app-changed-to-chinese-and-cannot-work-out-how-to-change-to-english?forum=officeitpro#448670ae-4494-4a55-8cee-d9f1c9873db7
    I then posted it a few days ago here:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_store/windows-81-apps-downloaded-during-developer/5dcd0df7-edfe-420e-8737-6a48922969e1
    I have now been asked by a Microsoft Support engineer to post the question here as they said a script can be provided which I can use to fix this.
    I think I just need to clear the fact that I have previously installed these apps as maybe some bug in the developer preview set them to Chinese and it seems to remember this setting. I cannot understand any Chinese so this makes these apps unusable.
    The only other option I can think of is to create a new Microsoft account but I would rather not have to do this.
    Some of the apps affected include the OneNote app and the HP scanner app. I have uninstalled most others and found alternatives.
    Thanks
    Robin
    Robin Wilson

    Hello jrv
    I managed to run the script but cannot really see how it is any different to uninstalling the apps in the normal way except for the fact that you can uninstall multiple apps at once.
    This exact same problem happens on a surface 1, a surface 2 and multiple machines running either Pro or Enterprise. It is not one machine but every machine running 8.1.
    I have not upgraded from the Developer Preview version on any of my machines and always do a fresh install but what I am saying is that I did use the same Microsoft account during that time and it seems to have some record of the apps I installed at that
    time and thinks I want them installed now in Chinese.
    The only thing in common on the 7 machines I have tried (including the 2 surfaces) is that I have joined them to my Microsoft account and the problem seems to be with the Microsoft account and not with all the machines.
    To replicate this I can go to any Windows 8.1 machine and join it to my Microsoft account and this will put certain apps from the store into Chinese and I can find no way to stop this. I am pretty confident that the issue is with the Microsoft account or
    a setting that is synchronising from there.
    The workaround is to sign into a different Microsoft account and this installs them correctly on the same machine.
    I would appreciate any help with clearing out my history of installed apps without having to create a new Microsoft account.
    Thanks
    Robin
    Robin Wilson

  • Problems Installing Microsoft Office 2004 on 10.4.3!

    Hi all,
    A friend of mine just purchased 10.4.3 from the Apple Store for use with his G5 (the original single 1.8). My friend is not very skilled with computers, so I have been helping him get 10.4 running.
    • We wrote zeros to his hard drive.
    • We then did a fresh installation.
    • We then ran software update.
    • Apps like Photoshop Elements have installed without problems.
    Microsoft Office 2004 (Student and Teacher) will not install using the installer or drag-and-drop.
    • The installer finishes but the Office 2004 apps are not on the Hard Drive!
    • Drag-and-Drop encounters an error (-36 I think) and stops installing.
    Obviously, my friend is disappointed that Office will not install on a fresh OS - Please help!
    PowerBook G4   Mac OS X (10.4.3)  

    Hi all,
    Templeton Peck may have been correct after all! I just got this message from Microsoft Support moments ago:
    Thank you for requesting support for Microsoft Office 2004 for Mac. My name is Mike and I will be working with you to resolve this issue.
    As I Understand you are Recieving an Error when installing Office 2004, which is not allowing you to Complete the installation.
    With Error 36 There is only one thing to do, you will need to contact our Replacment Product Department for a new disc, you can contact them by calling 1-800-360-7561
    Please let me know if this resolves your issue.
    Thank you for using Microsoft Technical Support...
    I guess I'll give a new disk a try -- I'll report back once I've tried that. :~)
    rawbertow789

  • Downloading Hardware & Software After Installing Microsoft 7

    Hello! A virus attacked my OS, so I wiped the old one (Microsoft 7 Home Premium) and installed Microsoft 7 Ultimate (64-Bit). After this, I had no drivers, hardware, software, nothing for the wireless connection, it's all gone. If possible I'd like to find and download all of these things instead of paying for a recovery disc.<br><br>I have hardware errors for the following things:<br>Ethernet Controller<br>Network Controller<br>PCI Simple Communications Controller<br>SM Bus Controller<br>and two Unknown Devices (one located in Port_#0003.Hub_0004 and one on PCI bus)<br><br>I checked to make sure the BIOS are current and downloaded and installed the most recent system and UEFI updates.<br><br>I don't know what I need and don't need from the Software &amp; Drivers Download Page or if I need more than is offered there. Please help. I tried to provide as much info as possible, but let me know if you need anything else. Thank you!

    Hi:
    Below are the links to the drivers you need:
    SM Bus Controller:  Install this driver first and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89304-2&cc=us&dlc=en&lc=en&...
    Graphics:  Install this second and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89328-2&cc=us&dlc=en&lc=en&...
    Audio:  Install 3rd and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-88355-2&cc=us&dlc=en&lc=en&...
    Ethernet:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89293-2&cc=us&dlc=en&lc=en&...
    PCI Simple Communications Controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89278-2&cc=us&dlc=en&lc=en&...
    Hub_0004:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105047-1&cc=us&dlc=en&lc=en...
    Other unknown is probably this...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89299-2&cc=us&dlc=en&lc=en&...
    Network Controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111707-1&cc=us&dlc=en&lc=en...
    Support & Driver home page for your model...
    http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&os=4063&product=5083668&softwareitem=o...

  • Problem encountered while installing Microsoft server -2008 -SP-2 (X32 bit) Ooperating system in our DELL -T300 poweredge server

    Dear Sir
    It is kindly requested to help us with these issue-
    we are not able to install the operating system(Microsoft server -2008 SP-2 (x 32 bit)
    Following error is coming during installation :-
    Windows server could not install due to one or more critical drivers missing. To install Windows make sure that the drivers are valid and restart the installation.
    Earlier ,We have observed that our working server has developed a problem of  2 no.s of hard drive failure out of existing 3 no.s. It was in RAID-5 mode. so the server was not booting.
    Recently we have changed the faulty hard drives with two new ones and after that configured the RAID  and we tried to install the O S but it was showing the above stated error.
    Please help us in solving this issue.
    Thanks and Regards
    J.Anil Kumar
    Mobile No : -09630414889
    IOCL Chennai

    A. Your RAID is configured incorrectly. Erase disks, make diagnostics and create new RAID. Make sure that you have at least 3 disks available for RAID 5 (This is the prerequisite.) Also make sure that you have latest firmware and BIOS installed.
    B. It this does not help, ask Dell support/forum for help. This problem is NOT on the Windows installation side.
    C. Do not publish your mobile number in this forum. Expect written response here.
    HTH
    Milos

  • Download manager empty / trying install flash player Firefox 3.6.11

    I cannot install flash for firefox 3.6.11... The donwload manager is empty...

    Don't use the download manager; download the installer for your operating system directly from http://www.adobe.com/products/flashplayer/fp_distribution3.html

  • Having problems installing Microsoft Office in my Lenovo S10

    I have been trying to install microsoft office for students in my Lenovo S 10, I upgraded my Ram so have enough space and I am using an external DVD writer model SE-SO84  by Samsung...Is there something I should know???   Thanks

    Hi all,
    Templeton Peck may have been correct after all! I just got this message from Microsoft Support moments ago:
    Thank you for requesting support for Microsoft Office 2004 for Mac. My name is Mike and I will be working with you to resolve this issue.
    As I Understand you are Recieving an Error when installing Office 2004, which is not allowing you to Complete the installation.
    With Error 36 There is only one thing to do, you will need to contact our Replacment Product Department for a new disc, you can contact them by calling 1-800-360-7561
    Please let me know if this resolves your issue.
    Thank you for using Microsoft Technical Support...
    I guess I'll give a new disk a try -- I'll report back once I've tried that. :~)
    rawbertow789

  • After migration to new iMac - problems with Microsoft office 2008 using multiple users

    I migrated my data from my old Imac to my new Imac.  On the new Imac I created multiple logins for my kids.  My microsoft office 2008 programs will not open.  I keep getting the "Customer Experience Improvement Program" screen which cycles through, checks for update then closes never allowowing me to access the program.  Please help!!

    Reference your first post - I download and use dmg files, so either I'm lucky or they are supported.
    I would try the disk reinstall since at this point there doesn't seem to be many options.
    Do you have a backup? You could restore the Microsoft Office 2008 folder.

  • Problem Instaling Microsoft Apps 2.1 5616

    Can not install update Microsoft Apps 2.1 5616 and previously used the 2.00 version.I've tried to solve the problem with reinstal Belle Refresh but again it was the same through the Nokia Suite and via OTA Helppppppppp!!!!!
    Solved!
    Go to Solution.

    We removed the many posts with screenshots as your description is quite clear and these posts do not really add any extra information. Have you attempted to do a fresh install of your device?  Follow the procedure below to do a full device reset and (re)install of the system firmware:
    If you have data on the phone you wish to keep create a backup using Nokia Suite but when asked deselect the option to include settings in the backup. You can start a backup through Tools>Backup in the Nokia Suite menu.
    Now disconnect your phone from the PC and select the offline profile, press the on/off switch and from the menu which appears select and activate the profile offline.
    Enter the code *#7370# followed by the security code 12345. Please be aware this reset may take a while. Your phone will restart when finished.
    After the phone restarts go through the Device First Use sequence to setup the phone correctly.
    Now connect the phone to your PC again and let Nokia Suite install the requires files on phone. After this (re)install the latest system update. When you go to the update screen in Nokia Suite your will either be presented by a system update or you can choose to re-install the current (up to date) version again.
    After the update verify if there are any additional updates and install these as well.
    After this you can restore the backup if you made one.
    It is possible that your device storage area requires a full rewrite to allow the installation of these apps, if the above does not resolve the ability to install the apps please visit a Nokia Care point for further assistance. You can find the nearest one through the 'Contact us' section on this page.
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Problem Installing Microsoft Visual Studio Professional 2010 in my laptop ( OS: Windows 8.1 64bit )

    hi staff of microsoft or anybody,
                        I have problem installation of VS pro in my laptop windows 8.1 (64bits) using web installer and offline unzipping iso. BTW i have VS 2013 installed in my computer at the moment. Before i
    upgrade from windows 8.0 to 8.1 , i used to have VS PRO 2010 but after installing VS 2013 it was uninstall automatically,
    I keep getting this popup of error: DDSet_Error: Internal error: 1009 ( while installing Visual Studio 2010 Professional ) . Could somebody tell me what is the solution because i need VS 2010 for my project.  thanks in advance for anybody who could
    provide me the solution , thanks a lot

    Hello SuperWeb,
    I have checked you logs and find something which may related to this issue:
    1.  WIN64DUALFOLDERS: Substitution in 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\Microsoft.VisualStudio.vspGridControl.dll' folder had been blocked by the 1 mask argument (the folder pair's iSwapAttrib member = 0).
    2. Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
    The folder substitution is blocked and the RemoveDirectoryAndChildren meet access denied in your setup. May I ask a few questions:
    1. Do you have admin privilege and have you run your setup with admin
    2. Do you have any ant-virus software installed on your OS which may blocked Visual Studio from installing?
    I will recommend u refer to this blog:
    http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-setup-errors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx
    You can then run a script to give all your folders and registries admin permissions. Let's see if you can install your setup after that.
    By the way, the checksum can be checked by using this tool from Microsoft:
    http://support.microsoft.com/kb/841290
    However since I cannot download ISO from DreamSpark as I'm not a student, I cannot help you verify it. Please contact your vendor to know the exact ISO hash number. A good ISO is required before you start the install process.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • How can i see my kernel level patch.

    Dear Friends, How can i see my kernel level patch. sach

  • Having trouble with itunes and windows 8

    anyone else having trouble with windows 8 and itunes?  My computer doesn't seem to recognize my shuffle.

  • Adsense and other ads not showing up in Firefox or Safari

    I've got a pretty irritating error coming up, no matter what I do I cannot for the life of me get ads to display in FireFox OR Safari. I've tried using different connections, and no dice. I've tried nixing every open process expcept a browser, and st

  • Cloning the Towers

    I have 6 G4 towers with the same specs that need to be rebuilt (OS9, Final Cut Pro, etc.) Has anyone had any luck cloning machines using FireWire target disk mode, or is there a better solution than TDM? Note: these are OS9 only

  • Can I have RFC sender Ansynchronous ?

    Hi, I have scenario to send data to ccBPM from R3. Can i use sender RFC for Ansynchronous mode ? How to do that ? Cheers Fernand