App error 200 on Torch 9800

Got an App error 200 on my Black. Been trying to restart and restart and restart but still it freeze during the process and still getting the App error 200 and the only thing my black allows me to do is to restart !!!!!
Was on Blackberry World trying to install Slacker radio when it all started
Took the Sim and SD card to see if it would change anything but still having the same problem
Does anyone know what can be done to fix this ?

Hello Solem
Welcome to BlackBerry Support Forums
Please try this Knowledge Base to resolve your issue with this Error :
KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows
I hope you already have a backup of your device , Or if you device allow first do a backup .
Additional Information can be found here :
KB30100 :  "JVM 200" appears on the BlackBerry smartphone.
Try it and let us know if you feel any issue.
Credits:
prince2012 
Solution:
http://supportforums.blackberry.com/t5/BlackBerry-​Torch/App-Error-200/m-p/2476845#M65764
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Similar Messages

  • App error 200 reset??? help me

    Hi,
    Can anyone help?
    I was doing a update but then accidently unppluged the phone so my blackberry torch started to reboot, it took a while then white screen App error 200 reset shows up i push it and then it trys to reboot again but same app error 200 reset over and over again. how can this be fixed?

    Try the method above, which circumvents Desktop Manager.  If that doesn't work, post back and we'll try some other things.  In fact, go ahead and download an app to your PC called BBSAK, which you get here: www.bbsak.org
    Once the app is installed, connect your device to the PC, then launch BBSAK.  You'll be asked for a password.  If you don't have a password set for your device, just click OK.
    Your device should hopefully be recognized by BBSAK, in which case, choose the Wipe Device option.  This will wipe the OS from your device, allowing you to do a fresh install using the instructions above.
    *** If I've been helpful please consider clicking the LIKE BUTTON beneath my post.
    *** Please remember to mark your thread as "Resolved" by clicking on OPTIONS to the right of the post and selecting "Accepted Solution."

  • App error 200 while updating my device software

    Could anyone please give me some advice?
    I was updating my Blackberry device software and after the update had finished was prompted to restart my system and the phone but my phone has since refused to come on. it keeps showing 'App Error 200' reset
    The issue is that my blackberry is loading when the battery is removed and inserted again, but won't log in. After a while a white screen is displayed with the following message: App Error 200 and Reset just below it.
    When I select the reset option, the above mentioned process just repeats itself.
    My Blackberry desktop application does not even recognise up my phone once it is plugged in again.
    please i would appreciate any help to correct this error and regain the use of my phone

    i tried this one & it worked
    http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB10144&sliceId=2&cmd=displayKC&d...
    or
    http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB03901&sliceId=2&cm...

  • App Error 200

    After installing an uodate to PocketGrapes Digital Wine Diary last night I was prompted for a Restart which I accepted. The Restart gets no further than the white line across the bottom of the Blackberry screen which hangs for about 5 minutes and then shows App Error 200. If I accept Reset the process is repeated. If I remove the battery and then replace it the same thing happens.
    I have tried to Restart in Safe mode but this does not work.
    I have tried to Reload the OS from Blackberry Desktop Software but when I connect my phone, the phone restarts and I get the Error message: "Cannot communicate with the connected device" because it is rebooting. The only way I can stop it from rebooting is by taking the battery out but if I then try and connect my phone I get the same error message bacause the software thinks the battery is flat.
    Any advice would be welcome.
    Solved!
    Go to Solution.

    Hello gillalwyn23
    Welcome to BlackBerry Support Forums
    Do you have a backup of your device ? You may need it .
    Refer to this Knowledge Base and try those suggestion :
    KB10144  : How to force the detection of the BlackBerry smartphone using Application Loader
    Please note , this method will data all user data within that device but you'll may be ab;le to get your device back in order , if you have a previous backup or using BlackBerry Protect you can restore it from there.
    Additional Information :
    KB30100 :  "JVM 200" appears on the BlackBerry smartphone.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • App Error 200 - Reset, BB curve 8520

    Hello,
    While I was downloading the new BB software via BB desktop manager, my laptop suddenly closed. After that, when I re-opened my mobile, after reloading, the screen went blank with an "App Error 200 - Reset" in the middle of the screen. I tried pressing the reset button, but it repeats the same system again! How can I solve this problem?! Pleasee Help

    Just enter an incorrect one 10 times and the phone will reset itself back to factory settings without a password and then you are good to go. (P.S: note that the device wont lock out it will start fresh as a new device). Have you made a back-up of your BB at any given point in time?
    If so, then you can just load the backup through the Desktop Manager.  
    Please follow the below threads and would give you some more idea on the issue and a feasible solution if mine doesnot satisfy you:
    http://supportforums.blackberry.com/t5/BlackBerry-Bold/Device-Lock-Password-reset/td-p/1125369
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/BlackBerry-device-password-does-not-w...

  • BB Bold 9900 APP ERROR 200.....HELP!!!

    I have a BB Bold 9900 and has the white screen with App Error 200 Reset screen, I have tried taking the battery out and plugging it into computer to reset it but comes up with the update screen and then says repair and then says No BB device updates available...what do I do now as just have an exspensive brick????? thanks

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:
    KB30100 "JVM 200" appears on the BlackBerry smartphone
    Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
    You also might want to do an OS reload. The simplest way is to, on a PC (you cannot do this on MAC):
    1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
    2) Uninstall, from your PC, any BB OS packages
    3) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/software/desktop.html
    4) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
    6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
    If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    You may also need the use of these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Bb app error 200 impossible to restart

    hey
    i have a bb curve 9360 n suddenly it got switched off n on, showing app error 200 reset.
    i tried to connect it to desktop software n update it but it shows fatal error while updating.
    i am stuck with no idea what to do now.
    any help would be greatly appreciated  

    You have to reload the same OS.
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • Error message "app error 200"

    I have an app error 200 on my phone. how do i fix it? Wont let me reset.

    An sdn search gave me this thread to create custom SOAP envelop
    Generating SOAP Envelope when DO NOT USE ENVELOPE option is marked

  • Curve 8520: app error 200

    I have a 8520. I tried deleting an app using the bb desktop software. At the end of the task I got the message "can't connect with the device". The device keeps saying "app error 200". What do I do?

    I have a 8520. I tried deleting an app using the bb desktop software. At the end of the task I got the message "can't connect with the device". The device keeps saying "app error 200". What do I do?

  • Hanging + App error 200 problem

    Hello
    I have a Curve 8520 (my brothers) which is a total mess!
    The phone is always hanging we can barley use it, I am trying to back up the phone in order to wipe it and update it but I am unable to. Also, i am getting the App error 200.
    I have been trying to backup the phone but i am unable as it hangs in the middle of the process!
    I need a way to back up the phone (it was never backed up) in order to be able to wipe it, update it and restore it again.
    Can someone help?

    Hello
    I have a Curve 8520 (my brothers) which is a total mess!
    The phone is always hanging we can barley use it, I am trying to back up the phone in order to wipe it and update it but I am unable to. Also, i am getting the App error 200

  • Cannot connect to PC. App Error 200 keeps coming up.

    I have a BlackBerry Curve 9380. While charging the battery an update came up on the PC to download. Since downloading the update, I cannot turn the phone on or navigate. The Blackberry name comes up and the line scrolls across the bottom then a white screen with App Error 200 (Reset) shows on the screen. When I reset, it goes through the same things and then stays on. I took it to a Bell store and they could not correct this problem and suggested I try you. I have tried reloading the desktop software, and taking the battery out and the problem still exists. Any help you could provide would be much appreciated.

    Hello lilbet,
    Welcome to BlackBerry Support Forums
    Please try this Knowledge Base to resolve your issue with this Error :
    KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows
    I hope you already have a backup of your device , Or if you device allow first do a backup .
    Additional Information can be found here :
    KB30100 :  "JVM 200" appears on the BlackBerry smartphone.
    Try it and let us know if you feel any issue.
    VIA | prince2012 
    http://supportforums.blackberry.com/t5/BlackBerry-​Curve/error-app-200/m-p/2484385#M200531
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • App Error 200???? Desktop Manager not connecting to Device??

    I am officially out of ideas for what to do with my phone!!
    I changed my pay as you go tariff yesterday and in order to reset the phone to get my internet settings I switched off the handset and turned it on again.
    When I turned it back on it started to load as normal then came up with  "App Error 200" message. I have done a hard reset and even after taking out the sim and battery it still wont work.
    I know I can change things on my Desktop Manager, but that now wont recognise the phone is connected. I have gone to the 'Options' button (top right hand corner) and applyed the USB connection but is still wont work!!
    Can anyone help as I am totally lost and have lost all patients!!!!
    Thanks

    If that still doesn't work you will need to do the following:
    http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
    http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
    Then reload the OS from the thread below:
    http://www.blackberryforums.com/general-8900-series-discussion-javelin/227412-os-8900-v5-0-0-1168-5-...
    You can use the OS in the download link in the thread above or you can download from your own carrier (doesn't matter where it comes from) but be sure and use the instructions in the above thread to install it.
    If you didn't have a backup from before this happened you will lose your data.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • App Error 200 when updating Device software on a BB 9380

    My desktop software askedme to upgrade the device software, I followed all the instructions waited the 2 HOURS it took to do this and when it got to the bit where it reboots, my phone popped up the App Error 200 and then got stuck in a loop..
    The pc just kept rebooting the phone and the phone just kept giving the same error.
    Im about to unplug the whole lot and go home to try again. My phone now seems to be a brick?
    HELP!

    Hello ToniYoung
    Welcome to BlackBerry Support Forums
    Please try this Knowledge Base to resolve your issue with this Error :
    KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows
    I hope you already have a backup of your device , Or if you device allow first do a backup .
    Additional Information can be found here :
    KB30100 :  "JVM 200" appears on the BlackBerry smartphone.
    Try it and let us know if you feel any issue.
    VIA | prince2012 
    http://supportforums.blackberry.com/t5/BlackBerry-Curve/error-app-200/m-p/2484385#M200531
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Error when updating torch 9800 software

    Hi
    I keep on getting an error in the middle of my OS update of the BB torch.  Ive tried all 3 updates available and they all stop after uploaded several units and say I must check my internet connection.  Tried on several different connections, 3G and lan.  I have a App 606 error, but the software detects my phone, I do the repair option and then go the normal process of updating OS.

    Can you try using a different USB port in the rear of the PC, or even on a different PC?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My bb 9860 is showing the app error 200

    hi, my phone is not working properly its occuring the error and doing self restarting, and in restarting i have to wait for 1 or 2 hour what should i do. my phone has allready 1 replacement before but still same problem..

    Hi jaldeep,
    This problem occurs most commonly when you install apps to your phone and those apps either don't install correctly, or one or more files are corrupted. If you installed an app shortly before this problem occured, this is the likely cause. You can try to boot your phone in safe mode (this may or may not work - the last time it happened to me, it didn't work). To do this, follow the instructions in the following link:
    http://www.blackberry.com/btsc/KB17877
    If you're successful rebooting the BlackBerry Torch in safe mode, delete the app you installed last, and then reboot the phone by removing and reinserting the battery to get back out of safe mode.
    If this doesn't work, then you'll need to reload the software on the device. To do that, follow the instructions in the following link:
    http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
    Unfortunately, you won't be able to back up your phone, but this will work to get you back up and running.
    I hope this info helps!
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

Maybe you are looking for