App error 240 on bb curve 9320
I downloaded an app called pic shuffler for bbm and it told me to restart my device as usual but when it turned back on it said app error 240 reset so i reset it like 5 more times still didnt work please helppp
Hello Indeedhelp0706
Welcome to Support Forums
Are you sure this is the exact error you recieved " App Error 240 " ?
Also have you tried removing that particular application from your device ! Start you device on safe mode , then delete any recently installed application from Option > Device > Application Management > locate and delete such 3rd party applications. After a reboot please check if error persists .
KB17877 : How to start a BlackBerry smartphone in Safe Mode
If that fails then perform a Clean Reload of your Device Software , for help refer to this KB :
KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows
Try it and let us know.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Similar Messages
-
App Error 200 - Reset, BB curve 8520
Hello,
While I was downloading the new BB software via BB desktop manager, my laptop suddenly closed. After that, when I re-opened my mobile, after reloading, the screen went blank with an "App Error 200 - Reset" in the middle of the screen. I tried pressing the reset button, but it repeats the same system again! How can I solve this problem?! Pleasee HelpJust enter an incorrect one 10 times and the phone will reset itself back to factory settings without a password and then you are good to go. (P.S: note that the device wont lock out it will start fresh as a new device). Have you made a back-up of your BB at any given point in time?
If so, then you can just load the backup through the Desktop Manager.
Please follow the below threads and would give you some more idea on the issue and a feasible solution if mine doesnot satisfy you:
http://supportforums.blackberry.com/t5/BlackBerry-Bold/Device-Lock-Password-reset/td-p/1125369
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/BlackBerry-device-password-does-not-w... -
App error 117 reset blackberry 9320
good afternoon, I have a blackberry curve 9320 and when you start to load the operating system reaches 70% and the screen goes blank with the message (Error 117 reset app)
and try installing the OS again using desktop software, also Use the BBSAK and did not give any results, also with instalador_rapido.exe did not accomplish anything, connect to pc via usb cable without battery to load operating system and the process put a battery at 100% charge and did not work either, still appears the error 117.
I need your cooperation
thanksHello die595tack067
Welcome to http://supportforums.blackberry.com/
Search and download your OS and all the above applies
Via sdgardne
Nevertheless, here's what I suggest...
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below. (This is probably moot given the errors you have...it's likely your data is already gone from your device, which means you must now rely on a backup you took before this happened.)
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I -
Hi, I have a BB curve 9320
Whenever I try to download the ESPN goals app it downloads ok; then when I open the app it prompts me to click on this update link thing. When I do that, it takes to the blackberry appworld web page and it says error. Has anyone else had this? How can I get past this 'supposed' error??
Any advice welcome!
Many thanksThat is the only contact point with the app vendor. Alternatively, you can call your mobile service provider's hotline and escalate the issue to RIM through them.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
Cant upgrade APP World Blackberry Curve 9320
Hi,
Im currently using curve 9320 and when i use my app worl its says that need to upgrade. i follow the instruction however still can't upgrade.
I have used both blackberry browser and internet browser but still there is error. What should I do please help
please help.
Thanks,
hnecesarioHello hnecesario,
Welcome to the forums.
What is the exact error you are getting?
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
BlackBerry Curve 9320 not able to access BlackBerry App World
Hi All,
I am new to Using BlackBerry.I have got a BlackBery Curve 9320 also as it requires 3G Net Connection for accessing internet i have put Vodafone's 3G internet pack as my network provider is Vodafone.But still i am not able to access my BlackBerry App World and many other stuff.But when i connect to my friend's mobile internet with Wifi i am able to access BlackBerry App word.Also when i try to access BlackBerry App it says " we cannot connect you to Blackberry App World.Please ensure that your devide is connected to the wireless network and try again"
Please Help and Guide...
Have a Rocking Day ahead!
Thanks and Regards,
Sushma Ramakrishnan Iyer (PS No. 298028),
SalesForce.Com Team,
HiCE Business Unit,
Old Building - Block 1,
Plot No.EL - 200 | TTC Electronic Zone,Shil - Mahape Road,
Mumbai - 400710.
Mobile : +91 96 6515 6328 | Work : +91 22 6795 4111
E-mail id : [email protected]Hello Sushu
Welcome to BlackBerry Support Forums
If you want to access most BlackBerry Application over your Mobile Network then a normal 3G data plan will not allow us, for that you have to activate BIS / BlackBerry Data Plan from our Carrier . However currently many application may work over a WiFi network .
So if you want to use those applications over your Carrier Network then call Vodafone and activate BIS on your account.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
I'm trying to find Gmail app client on BB curve 9320 for some reason this app cannot be found on BB App World, HELP PLZ!
Solved!
Go to Solution.The Gmail client was never available in App World, but rather directly from Google. However, they have now withdrawn the app as most functions provided by it are available via the built in email client and the enhanced Gmail plugin pushed to your device when you setup a gmail account via BIS
-
Need urgent help with this please. A friend of mine also has a bb curve 8520 and recently she keeps getting the "App error 523".
I've tried googling the problem and everywhere says to reset the o/s. While this is straightforward in theory, When I've tried to connect the device to the bb desktop, the phone loads up for about 5 seconds, and then the app screen appears.
It even does this when I boot up the bb in safe mode. I'm getting frustrated now as I cant do anything with the bb desktop (as in re-install the o/s) when the app error message screen comes up.
Any ideas please?If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
App Error 523 reset - Curve 8320
Hey there. My BB curve is showing the app error 523 reset screen over and over. I cant get it to do much. Every now and then when I do a battery reset it will eventually load the main screen on the phone and say something about exception 3 error...something like that then the app error 523 shows up... but for the most part everytime the phone comes on, within 15 seconds the app error 523 pops up and locks the phone up.
Now I have been reading online for the past day or so trying to troubleshoot the issue, and I've read where I have to load the desktop manager and either d/l the new O/S and/or delete any apps that might have caused the issue. My problem is I cannot get the phone to stay connected to the desktop manager long enough to do anything befor the app error 523 pops up and shuts the phone down again. I have tried taking the memory card out and doing it, also tried taking the sim card out, but that error 523 keeps showing up.
Does anybody else know of anything I can try with this phone? It's really starting to get annoying.
Thanks for any advice..Try this>
If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
Now, See if you uninstall any apps you question that might be cause the error --or theme.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Blackberry curve 8520 app error 523
BlackBerry Curve 8520 showing me this "APP Error 523 - Reset "it shows to me and it dosen't open,when i press Reset phone restarted but it shows to me the same thing. Later I connected data cable 8520 with blackberry desktop software
And delete all 3rd party apps with "loder" but I can't solve this problem. Its now show this this massage " app error 523" now my bb is off mode now how can I relode new OS in off mode. What can do???Hello noman6999
Sorry to hear about your issue ! Now try those steps as see if your device back to normal:
( Credit JSanders )
1) Make sure you have Blackberry Desktop Manager installed. BlackBerry desktop software
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device. BlackBerry Software Download Site
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
Additional information:
KB24395 : "Error 523", "App Error 523", or "JVM 523" appears on the BlackBerry Smartphone
KB10144 : How to force the detection of the BlackBerry smartphone using Application Loader
If needed you can also try this :
KB27956 : How to recover a BlackBerry smartphone from any state
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Curve 8520: app error 200
I have a 8520. I tried deleting an app using the bb desktop software. At the end of the task I got the message "can't connect with the device". The device keeps saying "app error 200". What do I do?
I have a 8520. I tried deleting an app using the bb desktop software. At the end of the task I got the message "can't connect with the device". The device keeps saying "app error 200". What do I do?
-
App error 204 blackberry curve 9300
this is so annoying my phone wont work just keeps saying app error 204 done battery repull even tried software updater i cant get my phone to connect to anything please help!
sjwilliams wrote :
this is so annoying my phone wont work just keeps saying app error 204 done battery repull even tried software updater i cant get my phone to connect to anything.
Hello sjwilliams
Welcome to the Community
Does BlackBerry desktop software detect your device when you Connect it ,If yes Try Reloading your Device OS
KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows
If not that try this :
KB10144 : How to Force the detection of the BlackBerry smartphone using Application Loader
Please try it and let us know.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Tried upgrading curve 9300 to 6OS and got APP ERROR 2OO
Hello , last ngiht I tried to upgrade my friends phone , right after I upgraded my 9700 perfectly on my computer, when I was upgrading my friends phone , I got prompted a screen that said something like " blackberry software needs to upgrade" , I ran the upgrade , and then tried again , then It started upgrading, like 5 mins after that , it prompted a screen that said " your device cant be recognized ", I clicked retry etc and nothing happened, when I disconected the device I got APP ERROR 200 , now It wont load and I am in trouble lol , can ayone help me ?
Thanks in advance Hello youngsta,
Welcome to the BlackBerry Support Community.
Perform a reload or upgrade your BlackBerry® Device Software. For more information on this procedure see the following article:
How to update or reinstall BlackBerry Device Software using BlackBerry Desktop Software - http://www.blackberry.com/btsc/KB03901
We hope this helps.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)! -
HELP - BB Curve 9320 Contact List Problem
hi , please help me resolve this..
previously my Curve 9320 was crash after update Whatsapp app..after restart, got error '102' - RESET..then after the problem resolved ( flash again using Desktop Software ) and i restore contact list from backup file, my problem happens..
from my backup file, i got 800++ contacts, but on my phone there was just 124.! where's my other contact from my previous phone books..?
thanksOpen your BlackBerry Address Book > press the Menu key > Filters.
Are any filters checked... if so, UNcheck them.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Outlook 2003 Contacts Sync with Curve 9320
Blackberry Curve 9320 | Blackberry Desktop Software (7.1 Bundle 1319) | Windows XP SP3 | Office 2003 SP3
Email stored in local pst file (no Exchange server)
I'm trying to sync a specific Contacts folder from Outlook to the 9320. I do the following in the software:
- Organizer
- Tick Contacts
- Configure…
- Sync direction: One way to your device only
- Contacts account: Microsoft Outlook
- Configure… | Outlook Profile: MS Exchange Settings (Only option)
- Advanced…
At this point I get a message box twice:
"WMS Idle: Rim.Desktop.exe - Unable To Locate Component
This application has failed to start because BJABLR32.dll was not found. Re-installing the application may fix this problem."
Advance Contact Settings still opens so I:
- Folders tab
- Select different contacts to sync
- Add required mailbox
- Change Default Folder
- Close and Sync Organiser
Then I get:
"Synchronization Error
A program error occurred at line 1548 in .\OIAccess.cpp. Please report this error by sending a log to technical support."
It appears to try and transfer 3 items (there are 100+) but no contacts are transferred.
I have reinstalled Blackberry software but the error remains.
The missing file is part of Office 2003 SP3 but despite a reinstall of the Service Pack the file was not installed in ..\Windows\System32 where it belongs.
What should be my next step?Are there any alternatives to importing contacts from Outlook?
Maybe you are looking for
-
I am using Pages 09 to write a script/storyboard. I'm adapting the standard screenplay template but would like to drop in framed 19.2 x 10.8 masks (ideally with a black stroke round them) to drop visuals into. In a perfect world I'd be able to save t
-
Combining clips with different properties
Hello If you have mixed-property clips on the timeline and wish to combine them into one MPEG movie to be viewed on the PC before being burnt to a DVD, which Presets and Export Settings would produce the best quality results? I am thinking of clip A
-
VISTA - battery gauge in task bar still flaky??
Hi, I recently updated the Power Manager software on my T61 to the latest version and found that the battery gauge display is still white and unreadable when using Vista+Aero (transparency on/off doesn't matter). The gauge displays correcly when at l
-
Can you change the format when converting pdf to excel?
example. I'm trying to export a PDF file to excel. However, the PDF file isn't in a table/spreadsheet format so when it exports to excel, I can't sort at all. It doesn't convert into any sortable columns. Is there a way to change the format on th
-
HT1976 why is my iphone 4 does not have cellular data network only cellular data
why is my iphone 4 does not have a cellular data network and apn only cellular data without apn settings,thanks