App Error 602

Hi
I have tried to upgrade my software on my phone. However after trying to re-boot, an error message is dsiplaying on my screen(blackberry screen). How can i restore my phone to work normally.
I use a windows 8 laptop. please help me. Thanks you

Hi and Welcome to the Community!
Here is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed
KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
Hopefully something there is helpful!
You also could perhaps try the steps in this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
VIA | sdgardne
http://supportforums.blackberry.com/t5/BlackBerry-Storm/Desktop-Manager-not-recognizing-device-conne...
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Similar Messages

App Error 602 & "Uncaught exception: Application net_rim_bb_messaging_app(144) is not responding; process terminated"

Hi,
I have spent a whole and very frustrating day trying to solve the following problem and in exasperation I resort to a posting here. Note no changes had been made to the phone prior to the start of the problem.
My Blackberry 9800 Torch freezes on power-up. It can only be ‘unfrozen’ by taking out the battery or, if left alone, after many minutes it comes up with the white screen, ‘App Error 602' and ‘Reset’ which is highlighted. Resetting has the same effect as taking out the battery. After each restart, it goes through the usual security and time checks and then freezes again. However, on rare occasions I got the message “Uncaught exception: Application net_rim_bb_messaging_app(144) is not responding; process terminated”.
Soon after the restart, after the Security Software Verification and on confirming the time/date, there is a very small window of opportunity (literally a couple of seconds) to access the phone. After much trial and error, I discovered that (in Manage Connections) by disabling the Mobile Network and WiFi - effectively putting it into ‘aeroplane mode’ - the device would work, without any problem and indefinitely. Except, of course, I couldn’t access the phone network nor the internet, which isn’t helpful(!).
I have taken this opportunity to do a full back-up on to my PC, through BlackBerry Desktop Software (though I’m not sure this backs up downloaded Apps??). Separately, I've also copied all the subdirectories from the phone’s memory and media card on to the PC, retaining their correct structures (but presumably also copying the corruption causing the problem?).
Any ideas???
- thanks in advance!

The method you are attempting is the automatic method...sometimes it just doesn't work, and you must take control. The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

App error 602 during update

hi,
I was updating my BB 9350 7.1 bundle 921 with the desktop software, after the download and the installation was done; i recieve an "app error 602" message during the rebooting. now my phone does not restart at all and i have tried and triend several times. the desktop softaware does not connet to it. what can i do?
Celeo Osorio

Hi Celeoosorio...
If you want to solve this problem on your Blackberry ... You must download the BBASK.
Also you have the DM (desktop manager) for Windows PC
Have and download the OS to your Blackberry in this case the 9350
BlackBerry Handheld Software v7.1.0.2364 (Multilanguage) by Bluegrass Cellular
Package Version: 7.1.0.2364
Consisting of:
Applications: 7.1.0.861
Software Platform: 5.1.0.606
File name: 9350_9370AMEA_PBr7.1.0_rel2364_PL5.1.0.606_A7.1.0.861_Bluegrass_Cellular.exe
File size: 210.35MB
You should apply wipe + factory reset and Wipe= Error 507
Luego tu proceeds to install OS via Loader
How to Install or Upgrade to a New RIM BlackBerry Operating System (OS) with AppLoader
Source: Crackberry
Regards...
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Help! Torch broken down from nowhere. App Error 602.

So today my phone was working fine as it always has, I decided to remove some programs I don't need. I removed Google Talk and AOL Messenger and pressed yes to reboot as it needed to. Phone powered off, powered back on again and did the black Blackberry screen with scrolling white loading bar. It gets to the end of it and instead of booting my phone it presents me with a white screen with App Error 602 on it with Reset underneath, I press Reset and the phone powers off, on, black Blackberry screen with scrolling white loading bar and then goes back to App Error 602, Reset.
I cannot get it to start, I need it working urgently, the only Blackberry Support page suggests they don't know what the problem is, and advises me to reset to software on the phone. The only problem is BDM 4.7 will not connect to the device because it can't boot!
It comes up with Blackberry Torch 9800 but every single option is greyed out. In the bottom right it displays 'Connecting' with a circling green symbol but nothing ever happens. Please can anyone be of assistance.
Regards.
Blackberry Torch 9800
Carrier o2 UK.

I would recommend you download and install BBSAK and do a wipe on the device and reload the software.
BBSAK Download here. http://www.bbsak.org/download.php
Device operating system releases are "released" by specific carriers once they have certified and trained their support techs, but still, you are able to load to any carrier's same model by following the instructions below.
See the link below, for the download and simple installation instructions.
https://www.blackberry.com/Downloads/entry.do?code=F466E84E4D899DDA09BE2BF2D3D7ECE3
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Device keep turning plain and displaying App error 602

Dear Sirs,
My BlackBerry Curve 9300 is not functioning properly any more after i made BlackBerry ID on my PC to connect the device with the PC. The device turning plain and displaying App error 602
Could you please help me
Thank You in advance
Abdi Halim Musa

Hi Abdi Halim
This Knowledge Based will guide you to solve that problem: "App Error 602" appears on the BlackBerry smartphone or "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7
Good luck.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

App error 602 stuck in loop

My Curve 9360 has been freezing alot recently so I decided to check for software updates - there were plenty - but now I'm stuck.
I've completed the backup and install process but the phone won't reboot. Each time it tries I get "App Error 602". I've tried the sofy and hard reset but I'm stuck in the cycle and my phone will not turn on!!
Help please!!
Solved!
Go to Solution.

You could try Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, if it will run stable, you might be able to conduct other activities.
Otherwise, you may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error 602 on the white wall paper

hello there, i do have a torch 9860, the phone stared by not booting. then after the settings were defaualted, its now showing E602 on the white wallpaper. what can i do to repair it and to make sure it never happens again

Hello kagwah
Welcome to BlackBerry Support Forums
Try this Knowledge Base to recover your device from this error :
KB10144 : How to force the detection of the BlackBerry smartphone using Application Loader
No one can specifically say the cause of this error , if this error appeared after installing any application then you need to be careful and don't install any unknown app , but sometime those error may appear without any reason , those are Java errors in which a user can't do anything .So the most important thing is that we should do a regular backup of our device , as in your situation , while following this KB to recover your device you will loose all data within your device. I hope you have a previous backup from which you can restore .
Additional Information :
KB23950 : "App Error 602" appears on the BlackBerry smartphone.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Application Error 602

Hi there,
I have been using a BlackBerry Curve 9220 since a year now. I earlier had a problem with my BBM when i upgraded to the recent software and faced Application Error 603. After a while the issue subsided but now it has come up with Application Error 602. I have deleted my BBM application now but still the problem is constant. I feel terrible without my BlackBerry.
Regards,
Ralph Poe

Hello,
It depends on your OS level...refer:
KB29237 "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7
KB23950 "App Error 602" appears on the BlackBerry smartphone
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

PMON: terminating instance due to error 602

Hello everybody,
I have serious trouble with Oracle database. My environment: Oracle Enterprise edition 10.2.0.5. OS: Oracle Linux 5.7
When oracle get distribution transactions in 3-5 minutes it crashes with information:
alert.log
Thu Jul 05 14:47:32 ALMT 2012
DISTRIB TRAN 4a5453.5DD801009C96A7544B5A4C41505030322C7365727665722C50313030
is local tran 49.15.2237 (hex=31.0f.8bd)
insert pending prepared tran, scn=1834678863 (hex=0.6d5afa4f)
DISTRIB TRAN 4a5453.61D801009C96A7544B5A4C41505030322C7365727665722C50313030
is local tran 51.1.2181 (hex=33.01.885)
insert pending prepared tran, scn=1834678938 (hex=0.6d5afa9a)
DISTRIB TRAN 4a5453.5CD801009C96A7544B5A4C41505030322C7365727665722C50313030
is local tran 67.6.992 (hex=43.06.3e0)
insert pending prepared tran, scn=1834678824 (hex=0.6d5afa28)
Thu Jul 05 14:47:32 ALMT 2012
Errors in file /u01/app/oracle/admin/clprod/bdump/clprod_pmon_12599.trc:
ORA-07445: exception encountered: core dump [koklcom()+59] [SIGSEGV] [Address not mapped to object] [0x0000001E4] [] []
Thu Jul 05 14:47:33 ALMT 2012
Errors in file /u01/app/oracle/admin/clprod/bdump/clprod_pmon_12599.trc:
ORA-00602: internal programming exception
ORA-07445: exception encountered: core dump [koklcom()+59] [SIGSEGV] [Address not mapped to object] [0x0000001E4] [] []
Thu Jul 05 14:47:33 ALMT 2012
PMON: terminating instance due to error 602
Instance terminated by PMON, pid = 12599
And crashes everytime when I starting in 3-5 minutes. Only when I run procedure for forcing rollback all distribution transactions dbms_transaction.purge_lost_db_entry(x.local_tran_id); it stops crashing.
We didn't contact with Oracle support yet. Our developers recommend to apply patch 10.2.0.5.6 but I haven't found so error in patch description.
Anybody can help me?

See MOS ID 8650138.8
It says that this issue is fixed in 10.2.0.5.6 Patch Set Update indeed

App error 606 and can't connect to desktop software either

hello,
today my blackberry (bold 9780) rebooted and once it restarted i got the app error 606, which i can reset over and over again (no help). i've googled and found out there were more people who've come across this problem. there were a lot of suggestions to use the dekstop software to backup and reinstall. but now i can't even connect to the desktopmanager, and the 'update' button isn't working either. i'm using a macbook pro (10.5.8) by the way. what can i do?
thanks.

Hey,
I already had it fixed. I know you can reset it via desktopmanager and there are some problems with new macs. But my mac isn't new (so no 64bit problem) and it wouldn't recognize it begin with. I never found out it had something to do with the fact that i never connected it before.
What I did was go to the store, had it send away.. So blackberry did the reset job for me. I got it back in 4days which made it less **bleep** haha.
I immediately connected it to my mac, and all was fiine.. So some can reset even with an error and some don't.. Hope this says enough.

App error 200 while updating my device software

Could anyone please give me some advice?
I was updating my Blackberry device software and after the update had finished was prompted to restart my system and the phone but my phone has since refused to come on. it keeps showing 'App Error 200' reset
The issue is that my blackberry is loading when the battery is removed and inserted again, but won't log in. After a while a white screen is displayed with the following message: App Error 200 and Reset just below it.
When I select the reset option, the above mentioned process just repeats itself.
My Blackberry desktop application does not even recognise up my phone once it is plugged in again.
please i would appreciate any help to correct this error and regain the use of my phone

i tried this one & it worked
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB10144&sliceId=2&cmd=displayKC&d...
or
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB03901&sliceId=2&cm...

Blue Screen of Death - Smax4pnp.exe app error

When I boot my T61 I get the "Smax4pnp.exe app error" and then later get the BSOD with Invalid_work_Queue_Item or no character string like the previous.
I ran MS Security Essentials and it found two or three Trojans & removed them.
Any idea what is causing this? Is my sound card dead?

A couple of things to try:
Run some other malware detector. Malwarebytes (frree) has done a good job for me. There are others.
Go to device manager and uninstall your sound "card". Reboot and let the driver reinstall. If it doesn't (or if the problem persists) download and install the latest driver and sound app.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Spooler SubSystem App error message when printing

I am having troubles printing with my HP Photosmart C4450 printer. The printer will not finish printing a job and will come up with the "Spooler SubSystem App" error message. The printer remains "frozen" after this message appears on my computer. I have tried uninstalling and reinstalling the printer witht the latest driver, downloading all the associated updates and running the HP Print Diagnostic tool to no avail. The spooler is indeed set to automatic and is started. I am running Windows XP on my computer. Any insight into this problem is appreciated. Thank you.

Have you tried with system PLD?
Thanks,
Gordon

Error "602" System error: AK Datapart too short

Hi all,
Ok, I have looked just about everywhere for an answer to this but to no avail...I even tried under a few rocks we have laying around.
Anyway here it is:
While running a compression in BW we get Error "602" System error: AK Datapart too short.
This is happening while doing a select statement during the compression of the infocube. It does not happen all the time, just kind like when ever it feels like. The only note I could find in OSS was one about Live Cache and it does not seem to apply.
Here is the dump which I really hate doing this, but it gives all the info needed :
untime Error          DBIF_DSQL2_SQL_ERROR
Except.                CX_SY_NATIVE_SQL_ERROR
Date and Time          08/15/2007 12:23:09
ShrtText
An SQL error occurred when executing Native SQL.
What happened?
Error "-602" occurred in the current database connection "DEFAULT".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
How to correct the error
Database error text........: "System error: AK Datapart too short"
Database error code .......: "-602"
Triggering SQL statement...: "INSERT INTO "/BIC/EZPSD_C03" ( "KEY_ZPSD_C03P",
"KEY_ZPSD_C03T", "KEY_ZPSD_C03U", "KEY_ZPSD_C031", "KEY_ZPSD_C032",
"KEY_ZPSD_C033", "KEY_ZPSD_C034", "/BIC/ZNET_ASP" ) SELECT ? ,
F."KEY_ZPSD_C03T", F."KEY_ZPSD_C03U", F."KEY_ZPSD_C031", F."KEY_ZPSD_C032","
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"GP31VIZWJDTT90894L1IA5YAC7G" or "GP31VIZWJDTT90894L1IA5YAC7G"
"TRANSFER_ALL"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"TRANSFER_ALL"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "sdcbw03"
Network address.......... "10.64.18.76"
Operating system......... "Linux"
Release.................. "2.6.9-55.ELsmp"
Hardware type............ "x86_64"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 21
Short dump setting....... "full"
Database server.......... "sdcbw03"
Database type............ "ADABAS D"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Nov 5 2006 19:46:34"
Created in............... "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version......... "SAPDB 7.5.0.030 "
Patch level.............. "156"
Patch text............... " "
Supported environment....
Database................. "MaxDB 7.5.0"
SAP database version..... "640"
Operating system......... "Linux 2.6"
Memory usage.............
Roll..................... 16192
EM....................... 20949280
Heap..................... 0
Page..................... 24576
MM Used.................. 9235016
MM Free.................. 3331560
SAP Release.............. "640"
User and Transaction
Client.............. 011
User................ "ALEREMOTE"
Language key........ "E"
Transaction......... " "
Program............. "GP31VIZWJDTT90894L1IA5YAC7G"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "GP31VIZWJDTT90894L1IA5YAC7G" in
"TRANSFER_ALL".
The main program was "RSPROCESS ".
The termination occurred in line 573 of the source code of the (Include)
program "GP31VIZWJDTT90894L1IA5YAC7G"
of the source code of program "GP31VIZWJDTT90894L1IA5YAC7G" (when calling the
editor 5730).
The program "GP31VIZWJDTT90894L1IA5YAC7G" was started as a background job.
Job name........ "BI_PROCESS_COMPRESS"
Job initiator... "ALEREMOTE"
Job number...... 12185102
Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
occurred in the
procedure "TRANSFER_ALL" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "GP31VIZWJDTT90894L1IA5YAC7G ". Its source code
starts in line 557
of the (Include) program "GP31VIZWJDTT90894L1IA5YAC7G ".
Source Code Extract
Line
SourceCde
543
ENDIF.
544
545
COMMIT WORK.   " commit and close cursors
546
547
l_str = i_max_requid.
548
PERFORM msg_append(saplrscondense)
549
USING    'S' '355' l_str space space space
550
CHANGING c_t_msg.
551
552
ENDFORM.                               " CONDENSE_FACTTABLE_NEW
553
554
555
     Form TRANSFER_ALL
556
557
FORM TRANSFER_ALL USING i_ref_update       TYPE rs_bool
558
i_pdimid           TYPE I
559
i_pdimid_ref_point TYPE rsd_sid
560
i_pdimid_normal    TYPE rsd_sid
561
i_recordtp         TYPE rsd_sid
562
CHANGING e_ref_ins_cnt TYPE I
563
e_ins_cnt     TYPE I
564
c_t_msg       TYPE rs_t_msg.
565
566
CALL FUNCTION 'RSDU_INFOCUBE_INDEXES_DROP'
567
EXPORTING
568
I_INFOCUBE = 'ZPSD_C03'
569
I_FACTTAB = '/BIC/EZPSD_C03'.
570
571
572
EXEC SQL.
>>>>>
INSERT INTO "/BIC/EZPSD_C03"
574
( "KEY_ZPSD_C03P"
575
, "KEY_ZPSD_C03T"
576
, "KEY_ZPSD_C03U"
577
, "KEY_ZPSD_C031"
578
, "KEY_ZPSD_C032"
579
, "KEY_ZPSD_C033"
580
, "KEY_ZPSD_C034"
581
, "/BIC/ZNET_ASP"
582
583
SELECT :i_pdimid_normal
584
, F."KEY_ZPSD_C03T"
585
, F."KEY_ZPSD_C03U"
586
, F."KEY_ZPSD_C031"
587
, F."KEY_ZPSD_C032"
588
, F."KEY_ZPSD_C033"
589
, F."KEY_ZPSD_C034"
590
, SUM( F."/BIC/ZNET_ASP" )
591
FROM "/BIC/FZPSD_C03" F
592
WHERE F."KEY_ZPSD_C03P" = :i_pdimid
Any thoughts would be helpful,
Thanks,
David

This error usually occurs when there is a database lock or no space in teh database. Got DB02 and Click on Space critical objects to see whether any entries are there. If yes contact your basis to increase the space.
Hope this helps
Thanks,
Satish

BB 8320 showing APP error 523. How do I back up data before installing new os

Help me pls I'm very desperate> my BB is just over 1 year old. Woke up to find the screen with APP ERRor 523 reset . I've tried all tricks in previous treads without success. Only thing left is to install new os. Trouble is that the BB is not backed up yet. How can I back it up before removing old os and installing a new os

Hi and Welcome to the Forums!
Sorry, but it is highly likely that your data is already lost...so there is nothing to backup now. This simply proves the point that there are two kinds of computing device users...those who have lost data...and those who will. Backups before things go wrong are simply not optional.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

App Error 602

Similar Messages

Maybe you are looking for