App error 606 and can't connect to desktop software either
hello,
today my blackberry (bold 9780) rebooted and once it restarted i got the app error 606, which i can reset over and over again (no help). i've googled and found out there were more people who've come across this problem. there were a lot of suggestions to use the dekstop software to backup and reinstall. but now i can't even connect to the desktopmanager, and the 'update' button isn't working either. i'm using a macbook pro (10.5.8) by the way. what can i do?
thanks.
Hey,
I already had it fixed. I know you can reset it via desktopmanager and there are some problems with new macs. But my mac isn't new (so no 64bit problem) and it wouldn't recognize it begin with. I never found out it had something to do with the fact that i never connected it before.
What I did was go to the store, had it send away.. So blackberry did the reset job for me. I got it back in 4days which made it less **bleep** haha.
I immediately connected it to my mac, and all was fiine.. So some can reset even with an error and some don't.. Hope this says enough.
Similar Messages
-
Netflix app error - Please make sure network connectivity and date and time are accurate
Am getting this error message when trying to view instant movies via ipad2 or iphone. Anyone have this error? I can't connect to Netflix via either device - I've tried unistalling & re-installing Netflix app on both devices. I am connected to the internet via our home network and date & time are correct on all devices & home computer - any other setting I'm missing? I didn't have any of these problems before I installed the new iOS5 on my devices. Netflix said it's an apple operating setting that needs to be modified.
Any help would be greatly appreciated.
Thanks!
KristenHI Jason,
I feel for you. That's a lot of work!
How large is the partition you tried to create using BootCamp for Windows?
And how much free disk space is on the MacBook startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 10% to 15% free disk space at all times.
Just in case, check the Mac startup disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Carolyn
Message was edited by: Carolyn Samit -
Torch App Error 606 + Can't connect to desktop Manager
Hi,
I was backing up my blackberry torch last night and the connection was disconnected during the backup. When the phone restarted the message "App Error 606" / "Reset" came up. I can't do anything on my phone except for reset it, and pulling the battery does nothing.
When I try to connect it to blackberry desktop software it wont connect... I left it for an hour and it still just said that it was connecting.
I also tried connecting to BBSAK and it couldn't connect there either, so I can't reset it to factory settings. I checked the desktop manager and it recognizes the USB port as connected to a blackberry device but that is about as close as I can get to connecting to anything.
I have a backup of all of my information from before this happened so I don't mind completely resetting my phone, but I have no idea how to do this without being able to:
a) connect it to the computer
b) do anything except reset on the phone
Any help would be great!
Thanks,
MikeTry in Safe mode, remove last installed 3-th-party appliction, may be it's help you?
Safe mode:
When starting the BlackBerry smartphone, safe mode can be used to prevent third-party applications from running automatically. Safe mode is designed to allow troubleshooting or remove any unwanted applications.
To turn on safe mode, complete the following steps:
Remove and reinsert the BlackBerry smartphone battery.
When the red light-emitting diode (LED) light goes out, press and hold the Escape key as the BlackBerry smartphone is loading. See KB05470 for the location of the Escape key. (The Escape key is located on the right side of the trackball, above the keyboard on the BlackBerry smartphone.Use the Escape key to exit a screen, move back a page in the browser, close a message, or close a menu.)
When the dialog box appears, click OK.
Note: Safe mode is indicated by a safe mode indicator in the BlackBerry smartphone status section of the Home screen.
To turn off safe mode, remove and reinsert the BlackBerry smartphone battery.
Be sure to click Likes! for those who have helped you.
If your query is resolved then please click on “Accept as Solution”. -
HT5113 "Invalid code error" and "can't connect to the iTunes Store." Any suggestions?
I keep getting an "invalid code error" when trying to preview a course with the enroll code. When I click on the link to the course, I get an error that says "can't connect to the iTunes Store." Any suggestions?
I tried previewing a test course I made about a year ago. I was able to request access to the course, went into Course Manager and approved it, but hours later it still says awaiting approval on my iPad.
Any ideas as to what could be going on, aside from a cruel April Fool's joke?
Thanks.
DavidHow about trying to sign out of your account on the iPad, restart the iPad, sign back into the account and then try again?
Settings>Store>Apple ID - tap on your ID and sign out - restart - go back - sign in.
Other than going through the support article - if you haven't already done so - the only other thing I can think of is to reset/reboot the iPad. That can clear the memory and it does help solve a lot of "hinky" issues.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.
Try changing the channel in use in case you're getting interference.
If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
mrtotes -
Im tryinging to sync my new iphone 4 and I keep getting error message saying can't connect to store -9808
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release
-
Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?
In settings>general> cellular do you have it turned ON?
-
TS1741 I lost my Apple TV remote and can't connect with my remote app. What do I do?
I lost my Apple TV remote and can't connect with my remote app. What do I do?
Buy a new remote or borrow one and make remote app work
-
iPad mini wont allow in app purchases, it says can't connect to I tunes , my internet connection is good and restrictions is off. Also won't allow on iPhone or another iPad.
Howdy MrsAllison,
The article linked below details a number of troubleshooting steps that can help restore your iPad Mini's ability to connect to the iTunes Store.
Can't connect to the iTunes Store
https://support.apple.com/en-us/HT201400
Cheers,
Allen -
Hello, my blackberry is giving me "App Error 606" with a white screen and "Reset" I reset the phone but nothing happened. I couldn't connect the phone with the Blackberry Desktop software ! How can I fix the problem without losing my data. note: I didn't packup my device ! Another question is if updating the OS will fix the problem, would my files remain the same or everything will be deleted after the update is done ?!
Hi q8fh and littlebird3450
Welcome to BlackBerry Support Community Forums
As you are unable to start you device on safe mode to do a backup as adviced above, so you might loss your data in order to recover your device . Please follow the WorkAround suggested within this KnowledgeBase to Recover your device :
KB23954 : "App Error 606" is displayed on the BlackBerry smartphone.
So please try it and let us know.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Device info.
Im with 3, however i did not receive the handset from them. Its a Blackberry torch 9810.
I Assume it was/is running the newest OS, but at this time i cant turn the device on to check.
My desktop software version is 7.1.0.37.
Issue.
My phone a couple of days ago was unexpectedly turned of. When i tried to turn the device back on, it took a long time getting half way through the OS booting loading screen, crashing and starting again. Eventually it got past the loading screen and showed me the app error 606 screen.
Now all the phone does when trying to boot up is get stuck in a loop of the blackberry loading screen, crashes after about 20 seconds, then starts again when the red light comes on. When attempting to connect to the computer using blackberry to usb wire, to reload the OS, it stays contended for about 20 seconds, the same time the phone keeps crashing. It just keep losing power, even though Ive been charing it for a while.
Ive tried following Knowledge base
-KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
-KB20371 BlackBerry Desktop Manager cannot communicate with the connected BlackBerry device
I know i have to reload the OS, however first i need to make sure the blackberry stays connected.
In Knowledge base KB10144 How to force the detection of the BlackBerry smartphone using Application Loader i get stuck on the step where blackberry software can not communicate with the connected device, either click Retry, Update or Cancel, when i click update, then repair, it just says there are no updates available, and a form below where you can enter your email address. Does not repair the phone at all. Is it supposed to open the application loader? I think this is all to do with the fact the phone keeps switching on then off, when either charging or trying to connect to the computer.
Might just be me being an **bleep**. But am i missing something? Ive read a million threads to do with the app error 606, Ive tried for about 2 days now to get a proper connection to the computer, or even just to see the app error screen again. Just always gets stuck on the black berry loading screen.
Any help would be much appreciated.theotedted wrote:
No other ideas then. Just get a new phone....
Have you tried wiping the device completely? You can skip to step number 5 if you want and see if BBSAK will connect and wipe the device. Then you'll need to come back to step number 3 (you can skip the backup since you can't make a backup at this point.) Another trick is to remove the battery and attempt to connect to the device.
1. First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. It doesn't hurt to do a manual backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion and unplug BlackBerry. You can get BlackBerry Desktop Software here http://us.blackberry.com/apps-software/desktop/
3. Download the OS file from step 1 to the PC then install it to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml." Also check the following locations for vendor.xml files and delete any instances of the file:
On Windows Vista/7 navigate to C:\Users\YOUR_USER\AppData\Roaming\Research In Motion\BlackBerry\Loader XML (Where "YOUR_USER" is your username)
On Windows XP navigate to C:\Documents and Settings\YOUR_USER\Application Data\Research In Motion\BlackBerry\Loader XML (Where "YOUR_USER" is your username)
5. If you're simply updating the OS to a newer version skip this step. If doing a clean OS reload use BBSAK from BBSAK.org and wipe the device (after doing a complete backup) then after you get the error 507 (no OS installed) then proceed to next step.
6. Plug in BlackBerry and double click on "Loader.exe." It's located in c:\program files\common files\research in motion\apploader
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth
Just got a new Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth. I get to the stage where you have to confirm on both systems the generated code and then it goes in error. Not supported. Any clue ?
Unless you have an iOS app that uses BT for a specific purpose, such as file transfer, BT on the iPad alone, as stated, does not support it.
-
I updated by Verizon BB Bold 9650 three days ago to OS 6. It worked fine until this morning when I turned the phone on and received a 102 error on the phone. I performed a re-install of the most recent OS6 using BB desktop software. After installation I received this message:
Your BlackBerry® Device Software is updated and you can safely disconnect your device.
Warnings were encountered during the loading process:
The following modules could not be loaded because their digital signatures were invalid.
SecurIDLib.cod
net_rim_bb_diagnostic.cod
net_rim_bb_file_explorer_library.cod
net_rim_bb_fileindexservice.cod
net_rim_bb_medialibrary.cod
net_rim_bb_media_framework_api.cod
net_rim_font_european_sff.cod
net_rim_font_arial.cod
net_rim_font_courier.cod
net_rim_font_georgia.cod
When turned on, the phone cycles through several error screens ending with a white screen stating App Error 606 reset, then another screen stating failed task: 'JVM'.
Have tried reloading OS5 software without solution and attempted x3 to reload OS6 with same result.
Any help is greatly appreciated.I updated by Verizon BB Bold 9650 three days ago to OS 6. It worked fine until this morning when I turned the phone on and received a 102 error on the phone. I performed a re-install of the most recent OS6 using BB desktop software. After installation I received this message:
Your BlackBerry® Device Software is updated and you can safely disconnect your device.
Warnings were encountered during the loading process:
The following modules could not be loaded because their digital signatures were invalid.
SecurIDLib.cod
net_rim_bb_diagnostic.cod
net_rim_bb_file_explorer_library.cod
net_rim_bb_fileindexservice.cod
net_rim_bb_medialibrary.cod
net_rim_bb_media_framework_api.cod
net_rim_font_european_sff.cod
net_rim_font_arial.cod
net_rim_font_courier.cod
net_rim_font_georgia.cod
When turned on, the phone cycles through several error screens ending with a white screen stating App Error 606 reset, then another screen stating failed task: 'JVM'.
Have tried reloading OS5 software without solution and attempted x3 to reload OS6 with same result.
Any help is greatly appreciated. -
I get an error that says can't connect to the itunes store when I search for a specific artist only
Hi all,
When I try to search for music by a specific artist in the iTunes store on my iPhone 5, I get an error that says "Can't connect to the iTunes store". This only happens when I search for music by this band. I can search for other artists and listen to song clips and everything seems to be connecting to the iTunes store just fine. But for some reason, it doesn't work with this artist. The band name is July for Kings. Not sure if anyone else has had this issue, but I hope so!
Thanks,
RickIF you are not able to resolve your issue then contact Apple Support at https://getsupport.apple.com/GetproductgroupList.do?caller=ikb&PRKEYS=PL220,1316 29,PL113,PL302,PF3,PF4,PF9,PL303,PL339,p…
hopefully they can help. You may also be interested to know that for some reason it is just not available to a lot of people at the same time. Appears to be an issue of more users than their servers can handle. Has happened periodically for at least 6 months that I know of but apparently users are able to use within several days if there are no other issues with the users device. -
"app is damaged and can't be opened" message
I have a problem with a Java application I made using Jar Bundler and then a disk image using Disk Utility. (I did this when I was still using Lion on this computer.) The dmg file was uploaded to a server for students to download. Everything works as expected on all Mac OS except Mountain Lion, where the disk image mounts, but the app cannot be run, (whether double-clicking or right-clicking and choosing Open), producing the message:
“xxx.app” is damaged and can’t be opened.
On Lion, I get a message warning me that it is a file downloaded from the Internet, but I can still choose to open it. But on Mountain Lion, the message is that it (the app) is damaged. Interestingly, I used my other Lion computer on my network to log in to my MountainLion (10.8.4) computer to access the same dmg file and mount it and run the app without problem. I also tried the opposite, downloading the file on the Lion computer (where it works fine) and logging in from the Mountain Lion computer to mount the dmg, but I get the same "damaged" dialog, with no option to open it.
What is Mountain Lion doing? How can I get around this? I need students to be able to download this and run it on their computers, and a good many use Mountain Lion. Any ideas what is happening?I found the solution since I have been having the same problem. The error message really needs to be updated to give a better indication of how to resolve the issue.
Apparently, Gatekeeper is the cause of the problem. Here is how to fix it.
http://www.yourkit.com/download/mountain_lion.html
Here is an Apple link about Gatekeeper:
OS X: About Gatekeeper - Apple Support
Maybe you are looking for
-
Isn't that like saying, you didn't meet your own deadline? I'm glad it has worked towards yours and C4$D's advantage.. $$$$ Anyway, I am a whole hearted Blender Freak. On my 4th year now. You can do almost anything in Blender, and since it's such a s
-
Exporting AVI clips (error: "[\Src\Win\WinFile.cpp-759]" after 4 %)
The following problem: I have 2 adobe premiere project. both have the same film and film length but different video codecs. 1. project (low quality video codecs (mpeg4) export works fine 2. project (high quality video codecs (avi) export stops every
-
Share Aperture photos over network
Hallo every body, iam searching for a solution, how to share photo over network for a long time, in our company we have 40 macs(imac, mac bookpro) and 3 xserve, vtrak and 30pc. and we have round about 30000 pic they are saved in iphoto library on one
-
I want to add a photo as an attachment and NOT have it pictured in the body of the email.
I want to add a photo as an attachment and NOT have it pictured in the body of the email. When I click on the paper clip to attach, it always is pictured in the email.
-
Visual basic for applications not responding
I receive this error.