APP (F110) SHOULD ALLOW TO BLOCK BUT NOT ALLOW TO UNBLOCK

Hi Friends.
Deepawali Wishes.
I have one requirement in APP that should allow the user to block the documents which are free for payment(In editi payment proposal) but should not allow the user to unblock those documents which are blocked for payment in FB60/MIRO/F-02/F-47 etc.
Thanks in advance.
Srini

Dear Srini,
Deepawali Wishes to you too.
Check out the options in the customizing for payment blocks. You can create blocks that cannot be removed at the time of payment proposal.
The path is -
SPRO>>Financial Accounting (New)>>Accounts Receivable and Accounts Payable>>Business Transactions>>Outgoing Payments>>Outgoing Payments Global Settings>>Payment Block Reasons>>Define Payment Block Reasons.
Hope this helps.
Thanks and Regards,
Anit

Similar Messages

  • My iphone apps shows price in indian rupees but not in dollars. My selected region and address is USA? How can i change it to dollar again

    my iphone apps shows price in indian rupees but not in dollars. My selected region and address is USA? How can i change it to dollar again

    my iphone apps shows price in indian rupees but not in dollars. My selected region and address is USA? How can i change it to dollar again

  • How can I share my music and some apps with my children's devices, but not share iMessage

    How can I share my music and some apps with my children's devices, but not share iMessage

    Then only set up your account in "Settings > iTunes & App Stores" and don't give them your password .

  • HT4009 I made an in app purchase, was charged for it, but not not receive item. How do I get a refund?

    I made an in app purchase, was charged for it, but not not receive item. How do I get a refund?

    How to Get a Refund from the App Store

  • Android App - works fine in Device Central but not in phone

    Greetings!
    Just looking for some general "you might try this" tips.  I've built a very basic game app for Android so I can start learning not only how to develop for Android, but also how to publish and distribute Android apps to users.
    My game works fine when I test in Device Central from Flash.  And I've been able to upload my app to the Android Market. But when I install and run on my Android phone (I've actually tested on two separate devices), I just get a light yellow screen with a series of tiny dots that move across the screen, almost like a loading indicator, but nothing happens after that.
    I've tried publishing as both an Air (Air 2) file and a Flash (Flash 10) file.  In device central, I tested the app on a Droid Incredible emulation.  The devices I've tested on are an HTC Inspire (AT&T) and an HTC Thunderbolt (Verizon).
    So, I know there's no way for someone to take my limited description above and say "this is your problem".  Again, I'm just hoping for some general tips along the lines of "try publishing in a different version of Flash".
    Any suggestions for where I should start digging? 
    Thanks in advance!
    Joel

    Sign out of the store on your phone, then sign back in. Note having content from more than one country's store may complicate the process of updating apps and downloading past purchases.
    tt2

  • Why do some Apps(programs) appear in my dock, but not in my launch pad?

    I recently downloaded Open Office and Adobe Photo Shop 12 .  Photo shop appears in both my dock and launch pad.  However Appace Open Office just appears in my dock, but not my launch pad, and also the open office little disk or cd reader icon (white 3d rectangle with image of black slot in front) appears on the right side of my screen.  I can't eject it because I get a popup that says it is being used by "Open Office" and I have to quit the application to eject it.  My question is if I quit the application using "Command" Q and then eject "Open Office" will I loose open office and have to downlad it again?
    I think I answere my question.
    I clicked on the Open Office Icon in my dock, had it go to "Finder" then ejected the "Open Office" disck reader icon and it went away from my screen.
    I then went to "Finder" and opened it up and Lo and Behold "Open Office" disappeared from there too. Boy that sure is crappy.
    So I downloaded it again. 
    Is there anyway to clean up the desktop so I don't have those silly images hanging around?

    There have always, well for the past few years, written installers that just create a mess.  All installed applications should appear in Finder, Applications.  Not all of those will appear in Launchpad.  When you encounter one that does not appear in the correct way, all you can do is manually move things around so it is consistent with the way apps should work.

  • Why did I get a free numbers app on my mac book air but not on my imac?

    I got a free download of numbers on my mac book air but not on my imac. Why is this?

    Hi Pamela,
    If it was free on your Air it should be free on your iMac too.  Perhaps you should doublecheck that:
    Your iMac is running Mavericks (the version of Numbers available for download from the App Store requires Mavericks)
    Your iMac is signed into the same App Store ID (usually, but not always, the same as the Apple ID you use to connect to iCloud) as your Air.
    SG

  • Medical app from Intuit works in IE, but not Firefox.

    Encrypted medical app works in new IE, but not Firefox. Everything works down to the end, and click on "continue" and nothing happens. A tech and I have spent hours on this. Did not work on FF5 or 6. Did not work on old IE, but did on fresh new version with no data files copied in.

    If it works in IE but not FF, then it has nothing to do with the mp3s. More likely it's because of the HTML on the page.
    To start, page is missing DOCTYPE declaration... a MAJOR problem. The DOCTYPE declares which set of rules the browser will use to display the page. Without it, different browsers go crazy or do not work at all.
    http://www.w3schools.com/tags/tag_DOCTYPE.asp
    Validate the html code here:
    http://validator.w3.org/
    You will have to fix all the errors if you want this to work in all browsers.
    Best wishes,
    Adninjastrator

  • Built app with subpanels works for me, but not for him

    Using labview 8.6 I have successfully built several revisions of an app that has multiple subpanels.  It has successfully executed on several different hosts.   However, with the most recent version I received a report that it launches, but the sub-panels do not load.  Of course, WFM (works for me) -- the sub-panels are compiled into the app and they load just fine for me.  The other user is using the free 8.6 LabView runtime.  Again, previous app revisions have worked fine, and I don't know what is different about this build that could affect loading of the subpanels.
    On my PC I renamed the path to the source files just in case the built app was picking up some missing file directly from the original VI directory.  Still works for me.  I even monitored it with FileMon (sysinternals.com) and confirmed that it never tried to open any other file (which further confirms that all the sub-panels are successfully incorporated into the built application).
    The only other significant difference is that the app is designed for 1280x1024 screen and the other user is running on a 1024x768 laptop.  But how could that affect loading the sub-VIs?
    Does anyone have any idea what would cause a built application with subpanels to work fine on one host but not display the sub-panels on another host?
    Thanks and Best Regards,
    J.

    How are you getting the software on the other computer? Did you build an installer?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Apps on some of our devices but not others

    Specifically, we have several Apple devices in our house: My son has a Ipad2 and an old ipod touch(which he never uses ipod since it can not be updated), My Wife has an Ipad2 also(just has more gigs on it), and I have an old ipod that can't be updated, that I now use for my alarm, and a newer one I think its a 5 since it has Siri, but no rear camera.   Anyway I had bought "Stickwars" some time back, and it is on my old ipod, and my son's ipad, but after the update is Not on my new ipod. even tried connecting my old ipod up to computer, and it shows it being on the ipod, but not the computer. How can I get this app on to itunes on my computer? I looked under purchased apps and it doesn't show.. ty for any help

    the one I am trying to get it one IS a 5. I managed to get it form connecting to our really old computer, now I have a different problem. this computer is the one I mainly use, and just bought some apps and music that I put on the 5th gen one, however now it tells me that this computer isn't auth. for this ipod.(and I letterally just bought this other stuff on it and transferred to this ipod about a week ago) isn't Auth.      I even tried removing auth . then giving it again, but no help

  • HT204266 apps are showing in my iTunes but not showing on my ipod

    Hi
    I have just bought a new iPod and all the apps are showing when I downloaded from the cloud but are not functioning at all. They are showing on my itunes screen on the right hand side but not in the tick section on the left hand side where you select the aps you want to use.
    Steve

    How did you set up your iPod? It sounds like you set it up via wifi. In that case you can't sync apps from a computer.
    Or are Restrictions set that prevent installing apps: Settings>General>Restrictions.

  • How do I get back lost apps that we're purchased ($50) but not showing up as purchased after IOS6

    I did the latest update and lost all my apps. It was not synced before the restore. How can I get my apps back that I paid a lot of money for? They are not showing up as purchased. When I go to the apps I know I purchased it does not show that it was purchased or installed ? Can I get those previously purchased back without paying for them again?

    As long as there is not another instance of that app on the device, you should. Just keep in mind, that as apps require updating, you'll have to sign in with different id's to update. Depending on how many apps and overall content is installed on your device, this could become confusing.

  • Scaling mobile app works fine on the X but not on the Y

    I originally made my app to work for iphone only but I am now scaling it to work on Ipad/ Android etc. I am doing all the scaling manually. It is a tabbed application.
    I am scaling all x and y locations and widths and heights by a scale factor that is created using..
              scaleFactorX = stage.width/320;
         scaleFactorY = stage.height/480;
    It works perfectly on the x but not quite enough on the y as objects look a little squashed vertically.
    I can't think why this is. If I were to alter the y scalefactor it would put things out when at the original phone size.
    The only part I'm not scaling manually is the actionBar and the bottom tabs. They are currently using default skins which use the DPI classification to determined size. I have however overridden this and set the action bar to use a skin with a much greater layoutContentGroupHeight. This hasn't however had any effect on the y scaling of objects in the main display area.
    The y scale isn't out by much, but it bothers me. If anyone has any suggestions I'd appreciate it.
    Thanks.

    Adobe won't fix it as long there are not enough votes for my bug report!!!!
    PLEASE VOTE: https://bugbase.adobe.com/index.cfm?event=bug&id=3376478

  • Script to find if list of Apps patches exists in DB 'A' but not in DB 'B'

    Hi All,
    DB:11.1.0.7
    Oracle Apps:12.1.1
    OS:Linux 86x64 bits Red Hat
    Could anyone please share the script to find if list of patches exists in DB 'A' but not in DB 'B'
    Thanks for your time
    Regards,

    We have already answered you, not sure why you keep asking the same question!
    SELECT bug_number,creation_date from ad_bugs where bug_number in
    ('1234','5678','56783','4321','765432');
    I get the list of patches out of the above say - '1234','5678'
    Now how to get the list of patches out of the above list of 5 patches which are not in the DB 'A' .I know this could be done manually but this is just an example as there may be hundreds of patches like this in ad_bugs to extract and we cannot manually do it in excel or any other way bit through a queryRun the same query in Database B and compare it with the output of Database A. Or, simply create a database link for Database B from Database A and run this query from DB A:
    SQL> SELECT bug_number, creation_date
    from ad_bugs
    where bug_number in ('1234','5678','56783','4321','765432')
    minus
    SELECT bug_number, creation_date
    from ad_bugs@<DBlink to DB B>
    where bug_number in ('1234','5678','56783','4321','765432');Thanks,
    Hussein

  • When e-mailing pdfs, the text becomes blurry/blocked, but not images

    Recently, when e-mailing pdfs to certain individuals, they complain that the pdfs they receive contain blocked/blurry text. ALL of the text is dropped or blurred, but not the images. I originally thought that it was a probelm with only the pdfs created from Publisher, but this week it happened to several pdfs that I did not originally create. One person uses his iPad to view files, and wants all pdfs created as "Print to PDF" options--however, that compromises the resolution of the file. Does anyone else experience this probelm? Is there a solution?

    Please let me know which device are they trying to open the PDFs on? Are they trying to open it on their desktops or on a portable device?
    Also, what happens if the same PDF is not opened via mail but is open directly on the individuals machine? Is the behavior the same.
    Thanks
    Ankit

Maybe you are looking for