App for accessing remote files on a mac that you can play in another app

Hey all,
Anyone know of an app that will allow me to access files stored on a mac connected to the same wifi that I can play the file through another app in the iPhone without the file being transferred to the phone?
For example, I want to be able to access a m4v stored on my mac over wifi, within the iPhone, to be played with a video player that I can send to a TV with the composite cable.
I found NetPortal, which works quite well, but you need to transfer the file to your iphone and even then, it wont open with many apps. I tried transferring a m4v file to my phone and it only gave me goodreader as an app to open the file with. I could simply transfer the file I want to access using my USB cable to my iPhone much faster.
Simply, I want to be able to stream movies from my Mac, through my iPhone to a TV and I am finding it hard to find Apps that allow such a thing.
Any suggestions?

I already have that setup at home. I want to be able to use this when I am on the road.
I already use StreamToMe and Airvideo, but sometimes the quality is quite bad, which is mainly cause by my low upload speed. So I am looking for higher quality alternatives. I carry around a macbook air a lot so I figured I could store lots of movies for on the road to be played on other's tvs when were taking it easy.
I am always so amused by responses on this forum. The solution is always to buy something.

Similar Messages

  • If I buy apps for my Iphone, and replace it or lose it, can I replace my apps for free?

    Considering an Iphone 5 purchase, Question - If I buy apps for my Iphone, and replace it or lose it, can I replace my apps to my new phone for free?

    under the same apple ID- yes

  • Home media server for mac, that you can also get to remotely.  Any ideas?  I am out of space on my macbook pro hard drive and appletv.  Need some sort of media server for delivery to macs, ipods, ipads, etc.  Any suggestions?

    Hi,
    I have been using my macbook pro as a home media server, hosting most content on the macbook with ipod touch, ipads, and appletv streaming/sharing content.  I have run out of space on both the macbook pro and the apple tv and am looking to moving the content to a home media server.  Any thoughts/suggestions?  I'd like something that I can access remotely too.  I have an old slingbox and also have a static IP address.
    Any thoughts/suggestions would be most welcome!

    Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

  • If I make a photo album in iPhoto,will it read well in an iPad? I want a photo flip book? Or is there a better app for me to create a digital scrapbook that I can share?

    Hi, I'm interested in creating a photo scrapbook in iPhoto, but I want to send it as a gift in digital form?  Ideally, I want the pictures, writing and images to view well in an iPad, like a customized FlipBook. Can you recommend an app or program that I can use, that doesn't require printing?
    Thank you,
    Tania

    iPhoto is a consumer level photo storage and manipulation program,
    It stores it's files in the iPhoto Library, which appears to be a file, but if right clicked on and "show package contents" is actually a folder with it's sensitive guts inside, including a folder called Modified and Originals which you can Finder > File > Duplicate and transfer out.
    If you use iPhoto to delete a photo, it IS removed off your hard drive as well but only from the iPhoto Library folder/package, not anywhere else on your drive as iPhoto is supposed to import a copy if say you have some on your desktop already and import them into iPhoto.
    So it shouldn't touch anything outside your iPhoto Library. So how you organize photo's outside your iPhoto Library is your business, however don't expect iPhoto to respect your wishes inside the iPhoto Library package, that's really reserved for iPhoto use only.

  • Build event announced that you can convert your android app to windows platform ! How can I get the tools to do it?

    From the build event I heard that you will be able to convert Android and iOS application to windows 10 phone platform! How can I do that ? Where can I get the tools ?

    Here you go!
    Universal Windows Platform Bridge for the Android Runtime:
    http://aka.ms/projectastoria
    Jeff Sanders (MSFT)
    @jsandersrocks - Windows Store Developer Solutions
    @WSDevSol
    Getting Started With Windows Azure Mobile Services development?
    Click here
    Getting Started With Windows Phone or Store app development?
    Click here
    My Team Blog: Windows Store & Phone Developer Solutions
    My Blog: Http Client Protocol Issues (and other fun stuff I support)

  • ***** that You Can not remove/Hide apps removed from Iphone 5

    Kinda ***** that iphone 5 won't let you hide app purchases uninstalled on your Phone.
    Thought this was supposed to be a smart phone?

    Have you read this?  http://support.apple.com/kb/HT4919
    Hiding and unhiding purchases in iTunes or from your device.

  • I want to play AVCHD videos in ipad from my JVC camcorder.which is the best tool for converting the avchd videos to formats that ipad can play?

    I have a JVC HD camcorder that creates videos in AVCHD format that ipad cannot play. Which is the best tool to convert these avchd videos to the format ipad can play?

    Airplay is a wireless streaming protocol. It allows content to be pushed from the iPad through the Apple TV onto your connected HDTV.
    If she wants to see the iPad displayed on the big screen and/or play games that involves mirroring. As long as it's an iPad 2 (or later) then you will be fine. More info on both has been referened below
    http://support.apple.com/kb/HT4437?viewlocale=en_US&locale=en_US
    http://support.apple.com/kb/ht5209

  • I have just signed upfor family sharing. Is there any way you can get the same app on two devices but not have to share it? My sons both want clash of clans but they don't want to be on the same village and they can't both be on app at the same time?

    I have just signed up for family sharing. Is there any way you can get the same app on two devices but not have to share it? My sons both want clash of clans but they don't want to be on the same village and they can't both be on app at the same time?

    hi, the app is not "shared", it works as if you bought the app twice with different accounts, only you paid it once. they should have 2 different villages since they're on 2 different devices.

  • Setting up Remote Desktop Apps for access from a Mac with 2FA

    Hi
    Setting up Remote Desktop Apps for access from a Mac with 2FA.
    I have a server 2012 remote access gateway, with remote apps published(which uses single signon), behind a 2FA connection (web based) and want to know if its possible to allow macs to connect to the remote Apps behind it. i cannot permanently remove any
    of the above setup as it is a requirement.
    When i connect from a mac i can login to both the 2FA and remote access web pages and see all the apps but when i click on any app it downloads it to the mac and when i try to run it using Remote Desktop App for MAC i get an error :
    "httpendpointexception: 4, The non-proxy http connection failed to connect with the message: 500 internal Server Error."
    I have tried with 2fa turned off for testing and get the same result.Does it support 2012 TSGW server? does it support Remote desktop apps? as i cant find a definitive answer on either.
    Thanks in advance for any advice.

    Hi,
    Thank you for posting in Windows Server Forum.
    From Error description it seems to be a communication issue between your Mac and your RD gateway server. If you connect from extranet, you may need Remote Desktop Gateway or a VPN/Direct Access connection to your intranet, or forward port 3389 on your router.
    500 Internal Server Error seems to be a HTTP related error. 
    The HTTP status code in IIS 7.0, IIS 7.5, and IIS 8.0
    Also, please double check the settings if you have a RD gateway implemented in you intranet.
    http://redmondmag.com/articles/2013/12/24/rd-gateway-in-windows-server.aspx
    In Windows Server 2012 R2 RD Gateway pluggable authentication is also introduced. This allows custom authentication routines to be used with RD Gateway. For example building a two-factor solution on top of RD Gateway is now possible which allows doing token-authentication
    to the RD Gateway which works seamlessly with RD Web Access or RDP file launching.
    Please check below article for more information.
    Windows Server 2012 R2 is coming what does this add to RDS – VDI
    In addition, please provide the log file from the client for further research.
    Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

    If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

    JDFitch wrote:
    Ok Great,
    Will installing Boot Camp drivers allow me to both read and write to the OS X Volume from windows?
    This is important as if it will it means i can make the windows partition a lot smaller and keep all my files on the OS X partition which would be preferable.
    Jon
    No, OSX will be read only (from Windows) and vice versa. (you can install 3rd party utilities on either or both partitions, to make read/write possible)

  • HT1145 I can't see my files on my USB shared drive.  It shows there is lots of space taken up, but I can't access the files via my Mac.

    I can't see my files on my USB shared drive.  It shows there is lots of space taken up, but I can't access the files via my Mac.  How do I see them?  I also can't see them on my iPad using FileBrowser.

    You don't have access to it to configure it via Time Machine? You lost me on that one, Time Machine is used for Backup.
    Here is a basic article on the first setup and what you should see:
    http://support.apple.com/kb/HT1178
    To configure Time Capsule you should be using "Airport Utility" 5.3 or higher that is located in the Utilities folder. You can tell if its version 5.3 because the icon will have blue lines instead of orange lines like the older versions. Since you are running Leopard 10.5.6 and you ran Software Update you are probably already running the latest 5.3 version.
    The light flashing amber means you haven't entered enough information so that it can get to the internet. Once you have that info entered the light will turn green.
    If your absolutely sure your CAT5 cables are good you can try a hard reset. I think you have to push the reset button on the back and hold it for 5 seconds or so until the amber light blinks rapidly, then when you release the button it does the reset then.
    http://support.apple.com/kb/HT1300?locale=en_US
    Hope this helps! If not I would probably call AppleCare support or see if you can exchange it.
    -Dan

  • Tyring to access remote Files present in AIX server through  windows ODI

    Hi all,
    I need to access remote file structure , present in AIX server through my
    window ODI client .But I am unable to create file Data Store for the same.
    It's showing error that "schema does not exist".
    please suggest me how to resolve this problem
    regards
    palash,

    HI Julien,
    It's really working ..........
    Thanx a lot
    For other people it will be helpfull info
    Only change that I have made for that task are
    1. I have created an new agent for that AIX machine
    2. I have updated the ODIPARAM.bat
    3. I have changed record separator as UNIX while creating data store for that file
    4. While executing particular interface ,I have used the agent which is local to AIX machine ..................
    Steps for execution:
    At the time of designing you must have local copy of that file so that you can perform your mapping once it's executing well wid your local or no agent .
    then come to the Topology manager change the location for that folder in physical schema declaration of that file server of AIX machine.
    Now execute the same wid ur AIX agent u have created earlier..............
    while U have changed the data store location from local directory to other AIX directory don't try to reverse the same otherwise u'll get "Execution query failed "or file not found kinda error as because odi system system searching local systems file.................
    Julien can u provide me ur mail Id so that I can contact U for further assistance ofcourse
    if u want................
    regards
    palash

  • The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

    The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue.  Is there a cable i can connect to another mac that will let me transfer the file?

    There is another option if the Macbook will start up in Target Disk Mode.
    Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
    http://support.apple.com/kb/ht1661
    Firewire symbol:

  • My Time Machine will no longer back up to my external disk for unknown reasons.  It would not accept my password and said the disk is read-only and damaged.  How can I copy my files to my Mac so I can repair it?

    My Time Machine will no longer back up to my external drive for unknown reasons.  It began after a series of power outages (my equipment is protected by a surge protector with battery backup), and was shut down correctly.  Then it began by not recognizing my disk and my Time Machine password, although I am positive it was correct. I tried NUMEROUS times to get into it. It says the disk is damaged and needs to be erased and started over.  How can I back up my files on my Mac so I can do that? I have no other disk to back up to.  I found the files in a folder called "Backups.backupdb", and tried to copy them into a folder, but get the message "The volume has the wrong case sensitivity for a backup."  The "lost+found" folder did copy for me. Will I just have to lose 4 years of backups?

    Hi there,
    I have the same issue. Usually hangs after 10K od sometimes after 18MB of backup file.
    Config: iTunes 10.4., Win 7 64bit, iPhone 4 with iOS 4.3.3
    I tried all of these without success:
    - deleted backups via iTunes / Preferences
    - deleted backups from sync folder
    - created a new admin user and tried to sync
    - reinstalled iTunes
    - ran all Windows updates, restarted, reinstalled iTunes
    - ran iTunes / Diagnostics (says everything okay, only info which is strange: diag says I am not a admin user, which is not correct)
    Nothing helped. Who can help. I hope someone from Apple can take care, as I seem not to be the only one. Actually iTunes is the worst part about iPhone. Hope with iOS 5 and Cloud sync to get rid of iTunes.
    Any hints welcome,
    Cheers,
    Miguel-KA

  • Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

    Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

    If you want a cross-platform solution that doesn't require the use of third-party software, use an external drive with hardware encryption. The device will have either a physical key or a numeric keypad. I don't have a specific recommendation.

Maybe you are looking for

  • Could not see the data in the cube

    Hi all, Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube. I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data fr

  • Reader for 3 1/2 in floppy (Sony)

    I have Sony MFD-2DD floppies that I need to get data from onto my Mac Pro (OS 10.9.4).  I bought the Sabrent reader and it works with other brands of floppies, but not the Sony.  (Sabrent advised that Sonys sometimes will read if you jiggle the eject

  • How to make a transport of ABAP Program to a QA environment

    Hi forum and sorry for my easy question, but i am a newby in ABAP How can i a transport an ABAP program to QA environment?... is the same machine only changes the mandant. Thnks Josue Cruz

  • Catalog manager not showing the tree view

    Hey Everyone I cannot see the tree view when i login in the catalog manger in the online mode.What could be the reason? I can see only the \ folder but not the shared,system and users folders.I checked even the instance config file and made sure the

  • Just downloaded Pro x, can't get rid of symbols in transitions

    Just Down loaded Final Cut Pro x, can't get rid of symbols on transitions hope you can help.