APP_IGNORE_ERROR to Y, but no Warning anymore in SC 4.1.1

Hi All In SC 3.5 we have set the Option APP_IGNORE_ERROR to Y, because we have a lot of DBs running on one Server. When one DB Backup fails the Job doesn't stop (because APP_IGNORE_ERROR=Y), but the Job went yellow in the Job Monitor. This Yellow Indicator is important for us for checking our Backups. Now in 4.1.1P4D3 we have also set the Option  APP_IGNORE_ERROR to Y, but when one DB Backup fails the Job still went green in the Job Monitor. Is this a BUG or a wanted behaviour? TIAThomas 

Hi John Thanks for your answer. We use SC 4.1.1P4D3. I have already open a Case.In the Config File I found following explanation: # APP_IGNORE_ERROR - (optional) - (Y|N) ## If set to Y will cause Snap Creator to not exit when encountering an application error. An error message will # be sent if SENDTRAP is configured but Snap Creator will not exit. This may be useful if you are backing up# multiple databases and dont want a single database failure to stop the backup So In my Understanding, SC should generate a Error (Warning) Message at least via sendtrap. I will Update this thread, when I have further Info from Netapp Support regardsThomas  

Similar Messages

  • Help need my mac pro for school..it has Grey screen..spinning wheel...repaid disk ok...repair disk permission all repaired but one warning...

    Help need my mac pro for school..it has Grey screen..spinning wheel...
    I think I have  mountain lion OS X....I have done I think almost every suggestion I've seen in discussion boards.
    Boot in recovery repaired disk...ok...repair disk permission...all repaired but one warning...I've tried to reinstall lion (without losing data) and it Got all the way to one minute to be done and then the time change back two hours and kept doing this all night long.  I haven't done a back up due to no external for time machine.
    I hope someone can please help me I've been going crazy for a week now trying to figure this out.  I use my computer for school and I'm currently very behind from in my school work  thank you
    Also I've checked my available space  424.91 free of 750 gigs....disk is verified

    Welcome to the Apple Support Communities
    Try holding the Shift key while your Mac is starting to start into safe mode. Then, after starting in safe mode, open Finder, select Go menu (on the menu bar) > Go to Folder, and type /Library/StartupItems. Then, empty this folder and restart the Mac.
    If your Mac starts after doing this, it was a problem with a third-party app that starts automatically when you turn on the computer. It won't start automatically anymore after doing that

  • Ll of a sudden, i can no longer see pictures in adds ?? did i click or disable something?? update: I can see them in EI but can't anymore in Mozilla?? What did I click??

    ll of a sudden, i can no longer see pictures in adds ?? If I go to Kijiji and look at any ad I can no longer see the pic in the add. Did accidently click or disable something?? update: I can see them in EI but can't anymore in Firerfox?? What did I click??
    I did a restore ,but no fix.

    See http://kb.mozillazine.org/Images_or_animations_do_not_load
    It is possible that you clicked "Block Images" in the right click context menu while trying to save an image.
    Check the image exceptions: Tools > Options > Content: Load Images: Exceptions
    See [[Options window - Content panel]]
    *A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
    *A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
    *Open the <i>Media</i> tab of the "Page Info" window.
    *Select the first image and scroll down though the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

  • How to remove 1797 emails. stuck in inbox.  but not showing anymore - and i have the same problem wit the sent.  please help

    how to remove 1797 emails. stuck in inbox.  but not showing anymore - and i have the same problem wit the sent.  please help

    This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
    At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card.

  • R12 XML Publisher reports shows output but with warning

    R12 XML Publisher reports shows correct output in both PDF and EXCEL but with warning, this is making the business uneasy, can any one help me with this.
    Please advise?

    Hi santark
    Please check [this search|http://forums.oracle.com/forums/search.jspa?threadID=&q=%22OPP+Response+Timeout+to%22&objID=c84&dateRange=all&userID=&numResults=15] this topic discussed before
    Regard
    Helios

  • How can i get rid of music or videos that i purchased from iTunes but dont want anymore. When i delete them they always come back in my downloads available?

    How can i get rid of music or videos that i purchased from iTunes but dont want anymore. When i delete them they always come back in my downloads available?

    thanks. somehow after restoring it, ipod on my phone had another option to download them onto my phone (even though they would play so no idea) but then it allowed me to swipe the songs to delete them so they are finally gone from my phone!!!

  • PCA is not activated but a warning to that effect is received when creat CC

    Hi Gurus,
    PCA is not activated but a warning to that effect is received when creating cost centers.
    How to overcome this?
    Regards
    Sap Guru
    Edited by: SAPGURU on Mar 11, 2008 9:06 AM

    Hi
    If you have activated FIN_PCA in your scenarios for GL accounting (New GL) this will prompt for profit center.
    IMG->FA (new)->FA global settings (new)->Ledgers->customer fields-> display scenarios for GL accounting.

  • In iTunes under my device, under the apps tab, Why are all the options shaded out?  I cannot make any changes, select any apps or do anything with the apps.  I was able to load a few apps and sync but cannot sync anymore to my phone.

    In iTunes under my device, under the apps tab, Why are all the options shaded out?  I cannot make any changes, select any apps or do anything with the apps.  I was able to load a few apps and sync but cannot sync anymore to my phone.

    Hi,
    ( I search for iChat questions when I have finished in the iChat Forum)
    So the menu bar reads iChat, File,  Edit,  View, Buddies, Video, Window and Help
    There is no Buddy List open.
    There is no other window for iChat open.
    In the iChat Menu you only have access to Status.
    Is an item ticked in the list ?
    Is this a green (Available item) or  Red ( an Away one) ?
    Can you access the Accounts option ?  (Sitll in the iChat Menu)
    Is anything in here ticked ?
    In the Window menu any Logged in account should appear in the list  (Between the Next Chat and File Transfer items)
    It would be useful to know which version of iChat this is.
    If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
    As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option  (you can use it in earlier OS versions if you want)
    Type in:-
    ~/Library/Preferences
    Find the file called com.apple.ichat.plist
    Drag it to the Trash and Restart iChat.
    This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
    9:23 PM      Saturday; August 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT201263 All of these steps were followed corectly. But a warning popped up and said that it could not be restored because it is locked with a pascode, and it said we must enter a pascode before we can use it with itunes. What should I do?

    All of these steps were followed corectly. But a warning popped up and said that it could not be restored because it is locked with a pascode, and it said we must enter a pascode before we can use it with itunes. What should I do?

    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, anyone had this problem and has advice?

    Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?

    See KB Article:  http://support.apple.com/kb/HT1274 Changing or resetting an account password
    my current country does not have a apple store....
    AS are not the only places that repair Macs.  Check out the following:
    International AASP’s & Other Services
    AASP's Outside of the USA
    How to find your nearest Apple Authorized Service Provider (AASP)
    Also, there are User Groups that can possible help.

  • Puchased music in itunes. but no file can be found. Have checked for available downloads but nothing available. Went to purchase again thinking i would not be charged again, but it warns me that i will actually be buying again and may have duplicates in l

    puchased music in itunes. but no file can be found. Have checked for available downloads but nothing available. Went to purchase again thinking i would not be charged again, but it warns me that i will actually be buying again and may have duplicates in library after purchase. Normaly after i purchase from itunes, it is a free download any time after, and on my other devices.
    Why can't itunes locate these files?

    It has always been very basic to maintain a backup of the important files and data on your computer.
    Use that backup to put everything back.

  • SSIS package fails with the error as given below. But its warning messages are incorrect.

    My SSIS package loads data from access database to SQL Server database.
    It's a straight copy. It fails with the below warnings and error message as shown below:
    Error messages:
    [OLE DB Source [113]] Error: There was an error with OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID] on OLE DB Source.Outputs[OLE DB Source Output]. The column status returned was: "Text was truncated or one or more characters had no
    match in the target code page.".
    [OLE DB Source [113]] Error: The "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]" failed because truncation occurred, and the truncation row disposition on "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]"
    specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
    [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on OLE DB Source returned error code 0xC020902A.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
    code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
    There are 3 warning messages even before I run the package. Warnings are all about the mismatch between the source and destination column sizes.
    I cross checked the source and destination column sizes. The destination column sizes are fairly high than the source column sizes.
    It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
    Thank you.

    It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
    Please check if the dev destination table has same column data types and size as compared with pre prod table
    Thanks, hsbal

  • I used to drag and drop newly loaded CD's from Recently Added to one of my iPod Classic playlists. I have no idea how to do this with the new version of iTunes. I thought perhaps checking Sync might give me a clue but it warned me Syncing would wipe conte

    I used to drag and drop music loaded from CD's from the Recently Added folder to a Playlist on my iPods Classic. Can't see how to do this with new iTunes version. Probably need to sync somehow but when I checked on Sync it warned me it would wipe out my iPod contents. Don 't know why Apple makes something that used to be simple so difficult. Can't even figure out how to display both my library and iPod contents on same screen.

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • Trying to upgrade to os 10.8.5  I now use 10.75  Bot the upgrade and downloaded. But a warning msg said that I need 10.8 first.  So trashed the dload, shut down machine thinking to go back and start over.Now the mac won't let me try re-download

    Hi - I made a mistake, I guess.  I'm tring to upgrade to os 10.85.  I now use 10.75.  I bought the upgrade and downloaded it, completely I thought... but when I opened it to install it, a warning came up and said I need 10.8  in order to install 10.85.  So...after some thought, I trashed the down load and went back to the app staore to find 10.8.   the little box by the mountain lion image said 'downloading'/  Sure enough in a remote corner of the screen there was a little box that said it was downloading.   arrgh.   I'd already trashed what was downloaded in finder .   So I figured I'd stop the download in the little box (which I think was 10.8)  , turn off the mac.  and then reboot, and download the whole thing again.   
    Now, when I go to the mountain lion image in the app store, and press 'download'  It won't let me download at all.   ??What to do??

    Back up all data.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    From the App Store menu bar, select
    Store ▹ Check for Unfinished Downloads...
    You may be prompted to sign in. If that doesn't solve the problem, quit the application and continue as below.
    Triple-click anywhere in the line below on this page to select it:
    open $TMPDIR../C
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). A folder should open. From that folder, delete the subfolder named "com.apple.appstore".
    Quit Terminal. Launch the App Store and try again.

  • Why don't I get a battery low warning anymore, laptop just turns off?

    My laptop is only just over a year old and I no longer get a battery low warning message. My computer just switches off. Have I disabled the warning somehow?
    The battery lasts for about an hour and a half which isn't great. This is what System Profiler says about it:
    Model Information:
    Serial Number: SMP-bq20z951-3a6c-fac
    Manufacturer: SMP
    Device name: bq20z951
    Pack Lot Code: 0000
    PCB Lot Code: 0000
    Firmware Version: 002a
    Hardware Revision: 000a
    Cell Revision: 0100
    Charge Information:
    Charge remaining (mAh): 1427
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 3751
    Health Information:
    Cycle count: 339
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): -1921
    Voltage (mV): 10690
    Any suggestions would be appreciated. Thanks.

    You have the removable battery? In that case, you can expect it to have up to 80% of original capacity at 300 cycles. You have 390 cycles, and it's probably got less than 80% capacity if it only lasts 1 1/2 hour. It's very likely just at the end of its useful life. If you go to an Apple Store, they can stress test it for you, and very likely you will be told you need a new one.
    Coconut Battery will show you the current battery capacity vs. the original battery capacity. Mine has 88% capacity after 259 cycles, but the last time I tried to calibrate it, my Mac shut off instead of going to sleep, although I did get the warning. I don't know if you can really calibrate it if it shuts down suddenly. The health on mine didn't change after the last shutdown.
    Good luck!

Maybe you are looking for