App imitates sending out a virus over the network
The last time I ran the Classic App called "Farallon Ping" which came with my old Farallon NC I bought years ago was back in 2003 or 2004 and I was told by IS of the University I was attending not to run it again as the app makes it appear to be sending out viruses over the network. The app is useful as it tells me my IP address and the IP address of every computer in my domain and offers many other features some of which that are lacking in the built in OSX utilities.
I am at a much larger University these days and I was wanting to run this app for the features but not sure if I should.
Is this post appropriate for this group and if so what do you say?
Thanks
Know nothing about Farallon Ping. Would MacPing at http://74.125.93.104/translate_c?hl=en&sl=nl&u=http://dartware.com/downloads/leg acy.html do the same thing?
Cheers, Tom
Similar Messages
-
I have tried reseting the network settings and turning my Imessage on and off but still no luck. Sometimes the LTE will drop and then the 4G so im wondering now if this even an software problem or service problem. I tried at&t but i was stuck on hold for long that i hung up.
Hi there,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
-Griff W. -
Revision: 19160
Revision: 19160
Author: [email protected]
Date: 2010-12-08 11:31:26 -0800 (Wed, 08 Dec 2010)
Log Message:
fix the regression of failed send out unsubscription message to the message client.
Basically when the MessageClient is in shutting down stage (still valid) the shutdown procedure needs to push message back to the client still. It is a regression introduced by change 18858
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/MessageClient.java
blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.javaHello,
Here is my 2 cents.
Oracle recommends you set the Oc4jCacheSize parameter to reduce the occurrences of MOD_OC4J_0087 and
related errors in your Apache error logs. To change this parameter, follow these steps:
1. Stop the OPMN processes on the middle tier.
2. On the middle-tier computer, open a terminal window and go to $ORACLE_HOME/Apache/Apache/conf.
3. Enter the following command:
cp mod_oc4j.conf mod_oc4j.conf.pre3604573
4. Edit the mod_oc4j.conf file by adding the following line after the </IfModule> line, but before the
Oc4Jmount /j2ee/* line:
Oc4jCacheSize 0
5. Start the OracleOPMN processes on the middle tier.
I would still suggest to analyze the stack trace further for exact issues.
Rgds,Ramesh -
Send BufferedImage over the network
I have already successfully setup a client/server connection. The issue, is when I send the BufferedImage over the network, it says:
"Caused by: java.io.NotSerializableException: java.awt.image.BufferedImage"
Can someone please tell me how to fix this?Like the exception say, BufferedImage is not serializable. You cannot serialize it. The problem will go away if you don't try to serialize it. Of course, that doesn't answer the question you really meant to ask... which I'll leave for somebody else.
-
why do my ical invitation acceptances send out multiple acknowledgements to the meeting intiator?
Hi,
Welcome to the Discussions
So we have DSL Modem <-> Base Station <-> Computer connected by Ethernet.
Is the Modem Routing ?
Is the Base Station set to "Share An IP" ?
(i.e are there two DHCP servers on your LAN ?)
Is Internet Sharing On in th G5s System Preferences > Sharing pane ?
In the Base Station is Port Mapping Protocol Enabled if it is doing routing ?
It is in the NAT tab of the Internet Pane.
Is the G5 also doing WiFi to the Base Station ?
Also check the Modem is not Blocking PINGS as this log shows no PING (But I am not sure it even got that far)
7:45 PM Thursday; February 18, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Sending text messages to pc's over the network
OK, so I know the system administrators where I work can send me text messages over their network directly to my computer. How do you do this over the Linksys wireless network? (Directly - as in not using an IM program). Thanks!
There is this nifty little program you can use over a LAN... http://www.dynatalk.com/
-
Bluetooth mouse cuts out when transferring files over the network
Just as the title says: whenever I copy files to a PC over the network (via SMB I think its called) My bluetooth mighty mouse will start getting very jerky and makes is very difficult to move the cursor on the screen. However, my Bluetooth keyboard is comply fine. Both are using Lithium batteries and where just replaced about a month ago. Also, both are in close range...about 2 feet. And it only happens when coping files.
Any ideas?
-ScottI don't connect to network volumes that often, but I did again today and noticed that my bluetooth keyboard completely cut out (had the "discounted" HUD come up) and then the keyboard would not reconnect until the file copy was complete. I don't know about the mouse as lately I've been using my Microsoft mouse that hasn't been giving me any troubles. (like really, Microsoft and "no troubles" in the same sentence??? lol)
-
Sending Connection Object over the Network using RMI
Hi,
How can a Connection object be sent over the network and run on another JVM. I need to hold connection object to execute processes one after other, that require Oracle connection without ever connecting again. I do not have J2EE container or webserver setup to hold connection/connectionpool,but need to run the process on command line. I am using RMI infrastructure to pass parameters/return values but connection object is not serializable and connot be marshalled and failing. Please explain, if there is another way using JDK 1.4
SudheerI think that what you want to do is connect to the database on the RMI server object, then use the server object from your remote clients to execute the processes you require to rrun.
-
Sending Connection object over the network
Hi,
How can a Connection object be sent over the network and run on another JVM. I need to hold connection object to execute processes one after other, that require Oracle connection without ever connecting again. I do not have J2EE container or webserver setup to hold connection/connectionpool,but need to run the process on command line. I am using RMI infrastructure to pass parameters/return values but connection object is not serializable and cannot be marshalled and failing. Please explain, if there is another way using JDK 1.4
SudheerI don't believe this is possible. A connection object has a number of associated structures on the operating system, which generally makes it impossible to move. From a fundamental networking level, you also cannot, in general, cause a connection to machine1 to start communicating with machine2-- that would introduce all manner of security problems.
Why don't you want to just create another connection on the other machine?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Installing an app from DVD-ROM on an iMac, over the network, to an iBook G4
I have a rather broad question: my in-laws want to install Office 2008 onto an iBook G4. Unfortunately, the G4 only has a CD-ROM drive (ie, read-only), and the Office 2008 install media is DVD-ROM.
They have a new iMac (onto which Office 2008 has already been successfully installed), and my suspicion is that you can share the install disk over the network, but I can't seem to find any detailed instructions on how to do so. I am (unfortunately) Mac-less at the moment, so I can't experiment myself, and my in-laws are about 2,000 miles away, so I can't just pop over and play around until something works.
Anyone have any guidance on how to use the DVD drive on one machine as a way to install on another over the network?
The iMac has Leopard installed, the iBook G4 has the latest version of Tiger.
Don't worry, no licensing issues as it's the Student/Home edition of Office 2008; you're entitled to install it on up to three machines.Go to System Preferences/Sharing and make sure that DVD or CD Sharing is checked. Ensure both Macs are connected to the same network. Insert the Office 2008 DVD into the Mac with the DVD drive. Open a finder window on the Mac without the DVD drive connect to the other machine. You should see the Office 2008 DVD in the finder window and you can install from here.
-
hello,
Im learning JMS and trying the examples from the tutorial. Both my SDK's are version 1.4.
At home, I have a Linux machine directly connected to a win-XP machine. Im trying to connect the two machines as in the example "Running JMS Client Programs on Multiple Systems" I do exactly what the turorial states. I check, as recommended, that the JmsFactory does exist.
What happens is somewhat dissapointing: when i issue the command "run SimpleProducer MyQueue queue 3", instead of messages get send over the network they end up in the own local queue at the side of the SimpleProducer. Both on the linux as on the win machine the same happens. I used both the IP-address and the netbios name of the remote machine in "ant add-remote-factory -Dsys=sys-name". The effect is the same.
Anyone an idea what is wrong??
Thank i.a.hi!
i went to bed frustrated, turned on my computer and now this comes up:
I try to lookup the connection factory with this code:
try {
connectionFactory = (ConnectionFactory)
jndiContext.lookup("EarthQueueConnectionFactory");
if (destType.equals("queue")) {
dest = (Queue) jndiContext.lookup(destName);
} else if (destType.equals("topic")) {
dest = (Topic) jndiContext.lookup(destName);
} else {
throw new Exception("Invalid destination type" +
"; must be queue or topic");
} catch (Exception e) {
System.out.println("JNDI API lookup failed: " +
e.toString());
System.exit(1);
This is the error it returns:
C:\j2sdkee1.4\doc\tutorial\examples\jms\simple>run SimpleProducer MyQueue queue 1
Destination name is MyQueue, type is queue
18-feb-2003 11:35:52 com.sun.jms.ConnectionFactoryImpl establishRemoteReferences
SEVERE: ConnectionFactoryImpl: Failed to lookup or connect to JMS service because: org.omg.CORBA.OBJECT_N
OT_EXIST: vmcid: SUN minor code: 202 completed: No
18-feb-2003 11:35:52 com.sun.jms.ConnectionFactoryImpl establishRemoteReferences
SEVERE: ConnectionFactoryImpl: Failed to lookup or connect to JMS service because: org.omg.CORBA.OBJECT_N
OT_EXIST: vmcid: SUN minor code: 202 completed: No
Exception in thread "main" java.lang.NullPointerException
at com.sun.jms.client.ConnectionImpl.invokeRemoteCreateConnection(ConnectionImpl.java:161)
at com.sun.jms.ConnectionFactoryImpl.createConnection(ConnectionFactoryImpl.java:314)
at com.sun.jms.ConnectionFactoryImpl.createXAConnection(ConnectionFactoryImpl.java:468)
at com.sun.jms.ConnectionFactoryImpl.createXAConnection(ConnectionFactoryImpl.java:444)
at com.sun.jms.connector.ra.JMSConnectionFactoryAdapter.createConnection(JMSConnectionFactoryAdap
ter.java:129)
at SimpleProducer.main(Unknown Source)
MyQueue exists and my j2eeadmin -listJmsFactory looks like this:
JmsFactory
< Connector Resource : jms/TopicConnectionFactory, jmsra.rar, , , javax.jms.TopicConnectionFactory
Properties: NONE >
< Connector Resource : jms/QueueConnectionFactory, jmsra.rar, , , javax.jms.QueueConnectionFactory
Properties: NONE >
< Connector Resource : EarthQueueConnectionFactory, jmsra.rar, , , javax.jms.QueueConnectionFactory
Properties: >
I have really no clue what is wrong. Can someone help me please???? -
I Have been getting blank texts from a number, but the person who owns the niumber is not sending them, they appear then disappear, they are not coming over the network, they come even though number has been black listed, also emails have been moved, I believe by someone who is cyberstalking me but don't know how to prove it, what can I do ?
Hi,
When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
I would contact Apple Support and check with them. (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
I did find this iOS: Troubleshooting Messages - Apple Support
It starts off about sorting SMS that is not working.
This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
7:55 pm Tuesday; January 6, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I want to share my external hard drive over the network
I found a lot of threads and discussions about this, but no answers.
I have a WD My Book External Hard Drive that I'm looking to share over the network. However, when I add the volume to the "Shared Folders" or even a folder within the volume and the "Users:" are grayed out.
When getting info on the volume, Sharing & Permissions says, "You can read and write"
Any ideas?Hi Keith,
Thanks for your response; however, the first screenshot is through the Sharing settings in the System Preferences. -
HP Laserjet M1132 MFP is too slow over the network!
Hi,
My HP Laserjet M1132 MFP is too slow over the network!
I have connect the printer to a windows XP 32bit SP3 using UBS port. The printer works fine on the local computer but when sharing it over the network it works too slow, for example with print test page it takes about 45 seconds to print and for other documents it takes much longer time.
I have installed the latest driver form HP website and upgrade the firmware it the latest version.
It happens on other Windows XP machines as well.
I connected the printer to my laptop (Windows 7 64bit) and it works fine (No delays over the network) and it seems that this problem have some relations with the windows XP Driver.
I have used local port trick on remote machines (instead of regular method) like this:
''add a local printer;
'new port'
'localport'
\\XPcomputer\HPPrinterName as port name
but still nothing!
There is nothing wrong with the network, we use to use a Samsung printer on the same machines over the network with no problem.
I Really appreciate your HELP!
This question was solved.
View Solution.BEHZAD_T, how is the printer connected to the network (wireless or Ethernet)? If it is slow wirelessly, I would suggest trying to connect the printer to your router with the Ethernet cord and install it to the networked computer that way.
Another question is, relatively speaking, how close to your router are the Samsung printer and the HP printer? Depending on the distance (and what stands between the devices) there can be a lag between sending a print job and it being received by the printer.
Let me know! -
The Exchange Management Shell fails to connect in Exchange 2013 environment, this is a DAG environment and previously it indicates another error message, which is in my another thread. We fixed that error by delete the retired proxy entry in the server registry,
after that the error is gone but changed to below one, anyway the EMS still fails to connect to all servers:
VERBOSE: Connecting to NSWVIP999WTMBX.air.abc.au.
New-PSSession : [NSWVIP999WTMBX.air.abc.au] Connecting to remote server NSWVIP999WTMBX.air.abc.au failed with the
following error message : WinRM cannot complete the operation. Verify that the specified computer name is valid, that
the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows
access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote
computers within the same local subnet. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : WinRMOperationTimeout,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
Then it just show can't connect to all the exchange servers, from the wording it seems pointing to the Windows firewall settings for winRM, but when I look at the windows firewall found it's turned off. We use Sophos enterprise for the security, but all
other 3 exchange servers didn't have the same issue.Hi Lynn,
Thanks for your analyst and reply, I run the command as you suggested and checked accordingly to Task Manager, but seems none of them indicates a firewall or anti-virus.
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:808 0.0.0.0:0 LISTENING 2260
TCP 172.17.2.123:444 172.16.2.127:8050 ESTABLISHED 4
TCP 172.17.2.123:444 172.16.2.127:8069 ESTABLISHED 4
TCP 172.17.2.123:444 172.17.2.127:8053 ESTABLISHED 4
TCP 172.17.2.123:10952 172.16.2.68:80 ESTABLISHED 3296
TCP 172.17.2.123:11185 172.16.2.90:8080 SYN_SENT 468
TCP 172.17.2.123:11190 172.16.2.90:8080 SYN_SENT 15268
TCP 172.17.2.123:11330 172.16.2.90:8080 SYN_SENT 1296
TCP [::]:80 [::]:0 LISTENING
4
TCP [::]:808 [::]:0 LISTENING
2260
TCP [::1]:6001 [::1]:8028 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8029 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8030 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8031 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8032 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8033 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8034 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8035 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8036 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8037 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8040 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8041 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8048 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8049 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8059 ESTABLISHED 4764
TCP [::1]:6001 [::1]:8060 ESTABLISHED 4764
TCP [::1]:8028 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8029 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8030 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8031 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8032 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8033 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8034 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8035 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8036 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8037 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8040 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8041 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8048 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8049 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8059 [::1]:6001 ESTABLISHED 9980
TCP [::1]:8060 [::1]:6001 ESTABLISHED 9980
TCP [fe80::9054:e8f5:f885:8105%20]:808 [fe80::9054:e8f5:f885:8105%20]:9901
ESTABLISHED 2260
TCP [fe80::9054:e8f5:f885:8105%20]:9901 [fe80::9054:e8f5:f885:8105%20]:808
ESTABLISHED 4868
This is the full result, among them
4 -- System -- NT Kernel & System
468 -- There is no process associated with PID 468
1296 -- svchost.exe -- Host Process for Windows Service
2260 -- SMSvcHost.exe -- SMSvcHost.exe
3296 -- CcmExec.exe -- CCM Executive
4764 -- Microsoft.Exchange.RpcClientAccess.Service.exe -- Microsoft.Exchange.RpcClientAccess.Service.exe
4868 -- Microsoft.Exchange.ServiceHost.exe -- Microsoft.Exchange.ServiceHost.exe
9980 -- w3wp.exe -- IIS Worker Process
15268 -- ServerManager.exe -- Server Manager
Maybe you are looking for
-
HP Pavilion dv7-1285dx - No F11, Won't Boot Windows -- Recovery Manager PATH?
I am repairing an HP Pavilion dv7-1285dx for a friend. I have restored countless other computers but this one has driven me up the wall after 7 hours of trial and error and web searches. Here's the deal: --The computer came with Windows Vista --The o
-
File Content Conversion--- Removing Quotations from csv file
I have a csv file in the folowing format: field1,field2,field3,field4 "111","222","333","444" "aaa","bbb","ccc","ddd" Suppose the header name is row in IR. While configuring the sender file adapter in XI, i have given following parameters under file
-
hi, Pls tell me if am correct or wrong for the following scenerio. For example, my client pays down payment for an asset (worth 50,000)--- 10,000 in jan 10,000 in feb and makes a payment of rs 30,000 in March when he recieves the Asset.and he will ca
-
REP-0177: An error occurred while running in a remote server.
I am getting the following errors while trying to run a report script. The report was created in Report Builder. REP-0177: An error occurred while running in a remote server. Reference parameter OT_RUN_DATE in the distribution list is invalid. OT_RU
-
Error in parsing value for display
Hi I'll try to access a website http://sinaica2.ine.gob.mx/magic/rmart but Firefox 8.X and 9.X dont show me a frame inside the middle of the new window, but any other browser also an older version of Firefox does well. Firebug reports me a warning "E