App installer cannot find my phone

but the pc suit and all the oter things like music and pictures connects fine but my app installer wont find my phone
any help please thanks
Jamie

Phone?
If on s60; You can install them directly to phone; Copy *.sis *.jar to somewhere on ur mem card disconnect phone, Go to File Manager>navigate to folder where u copied file>open.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Similar Messages

I am so angry - there has to be a misundering. my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone

I am so angry - there has to be a misunderstanding. my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone number for security and the dingbat girl who I'm emailing send me a link that does not work. And I am extremely frustrated. Please help. I need a phone # to contact security.

Contact Apple Support here:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

I need to get into contact with Adobe support on renewal of my CC subscription which does not work but I cannot find any PHONE number just the referral to this forum - help, what should I do?? Thanks!!

I need to get into contact with Adobe support on renewal of my CC subscription which does not work but I cannot find any PHONE number just the referral to this forum - help, what should I do?? Thanks!!

Use the web chat:
Contact Customer Care
Mylenium

I bought a second apple tv and would like to control it with the remote app but cannot find a way to add a second device. Anyone have an idea how to do that?

I bought a second apple tv and would like to control it with the remote app but cannot find a way to add a second device. Anyone have an idea how to do that?

I'm having the same issue and would like to get some help. I set up a second Apple TV in our bedroom and wanted to be able to control it using my iPhone like I do with the Apple TV in the living room. The new Apple TV is active on the network and I've made sure the same Apple ID is used for both the Apple TV as well as the Remote App on my iPhone. I'm just wondering what I might be overlooking.

Installer cannot find Msi file

when Itunes tries to update the error message appears Installer cannot find the Msi file

Hi kingsdown1,
Welcome to the Support Communities! The resource below explains what to do if you are having issues installing iTunes for Windows:
Issues installing iTunes for Windows - Apple Support
http://support.apple.com/en-us/HT201668
Learn how to resolve issues when installing iTunes for Windows.
Make sure you have an administrator account.
To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Install the latest Microsoft Windows updates.
To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Download the latest version of iTunes.
The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
Repair a previously installed version of iTunes.
If iTunes is already installed on your computer:
Search for iTunesSetup or iTunes64Setup on your computer.
Right click on the file.
Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
Windows XP: Choose Open.
Click and follow the wizard to repair iTunes.
Remove iTunes from your computer.
Remove and reinstall iTunes and other software components for Windows XP
Remove and reinstall iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Songs you bought from the iTunes Store or imported from CDs are saved in your My Music folder by default. They won't be deleted by removing iTunes.
Disable conflicting software.
Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig:
Using Msconfig to troubleshoot conflicts in Windows XP
Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
Restart your computer.
Install iTunes.
Additional assistance
If the steps in this article don't help you resolve the issue, you might be able to find a solution through a search of the Microsoft support website.
If you've received errors regarding inaccessible registry keys during installation, try the steps found in "Could not open key" message when installing iTunes, QuickTime or Apple components for Windows.
I hope this information helps ....
- Judy

Blackberry 9700 cannot find other phones with Bluetooth on

Although the Bluetooth on my BB9700 is on it still cannot find other phones even though the bluetooth of those phones are on as well. Anyone knows whats's causing this?
Solved!
Go to Solution.

Hi and welcome to the Forums ceejaysan! . Do you have the phones set to discoverable?
Post back and let us know. It it good to have you here.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

HT1175 New Time Capsule, during installation cannot find sparse

My time capsule during installation cannot find sparse

The question is unclear.. A new Time Capsule will have no sparsebundle.. it will be a blank disk.
If you are trying to find a previous backup on a new computer.. please look at the various methods from Pondini.
Q14-17. http://pondini.org/TM/FAQ.html
If you are trying to reconnect to old TM backup.
See B5 or B6 here http://pondini.org/TM/Troubleshooting.html

I cant find the app find my iphone HELPPPPPPP i cannot find my phone

i woke up and couldnt find my cell phone i was looking everywhere for it so i tried to get the app find my iphone but i cannot find on the app store help

As long as you had Find My Phone activated on your iPhone you can log into iCloud.com and use Find My Phone to find it.

I am trying to unlock a phone that I have brought that is originally locked to orange, I have an email from orange with all the instructions but I cannot find my phone when I go into itunes, help!!!!

I have recently brought an iPhone from a friend that is locked to orange network, I have an email from them explaining how to unlock the phone:-
Connect to iTunes using USB
Use the 'restore' option within iTunes (located at the bottom of iTunes not the top)
I cannot find the restore option, having been trying for about 3 hours now, someone please help!!!!!!

Follow this
iPhone: About unlocking
Suggest you reboot PC/Mac and reset iPhone before starting
You are plugging the iPhone into the PC/MAC ,aren't you

Installation cannot find a disk to install on

Hello,
Very short version of the problem:
*Tiger installation does not detect any harddrive to install to*
Full story:
Yesterday I bought my very first iMac. It's a 20" wirh 2Gb ram and 300Gb disk.
It was preinstalled with Tiger. I did the updrade to Leopard mself. No problems there.
Then I treid to install Windows using bootcamp.
Since then, a lot of problems.
The system will not start anymore.
So, since this is a fresh system, I have no problem starting all over again.
I can't directly start with Leopard since they are only upgrade disks, so have to install Tiger first.
When I have the install-1 Tiger disk in the CD and start the system, the upgrade
starts.
*But at a certain point it shows the box with available Harddrives to install to.*
*That box is empty on my screen !!!!*
*This is the problem: The apple cannot find my harddrive anymore.*
does anybody have a clue what to do now?
Thanks in advance for your help.
Bert Catsburg

Thanks for the feedback. Yes, the menu bar is at the screen's top. Good computing.
FWIW, these might be helpful:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
MacFixIt Tutorials, and
MacTips Learning Centre.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides, and
A guide for switching to a Mac.

Cannot Install - Installer cannot find file

A colleague and I are getting the same error when trying to install this software.
The installer extracts files into the temp directory, then an error pops up saying "The system cannot find the files pecified." I can see that it is trying to find "hpzrein01.exe" with "hpqins15.dat" included as a parameter. I can see the .dat file in the specified directory, but the .exe does not exist in the folder that the installer deposited the extracted files.
Any help would be appreciated. I did some web searches, but did not find a solution.

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

HT5624 I need 'Dragon Remote Microphone App' and cannot find it? App Store does not list it?

I wish to transfer and transcribe fites from a Sony Voice record to a Mac computor and transcribe it with Dragon Dictate. Can and how do I do this? I read that I need an app. "Dragon Remote Microphne" but cannot find this app. Any help is appreciated. SomFlint.

https://itunes.apple.com/us/app/dragon-remote-microphone/id436624808?mt=8

Tiger 10.4.3 Installer Cannot Find Destination Drive

I am trying to upgrade[finally] from 10.2.8 to 10.4.3 using the installer disc, but it cannot find my hard drive for it to install. I have run a repair[ Disk & Permissions] using Disk Utility, everythings fine. Have run an Apple Hardware check and again eveything fine. Through System Preferences/Startup Disk It sees my disc no problem and everything is running smoothly and quickly, so I'm a bit worried why the installer disc is unable to see my hard drive.
Any help with this would be much appreciated, Sorry if this query has been answered elsewhere, I had a good look before I added this entry and couldn't find an answer.
Thanks for your time.
Power Mac G4 Quicksilver[Mirrored Drive Doors] Mac OS X (10.2.x)

Had a go but the DVD's Disk Utility simply couldn't see my hard drive went on the System Profiler off the installer disc and again the only disc it could see was the DVD itself, No other ATA drive or Serial ATA drive. Rebooted the computer as normal and the system profiler saw the hard drive with no problem. I unplugged all peripheral hardware like DVD Burner, Scanner and Printer, and my Firmware is all up to date as your checklist suggested too.
Was wondering, my hard drive has it's jumper set to "Enable cable select", When starting from the Installer disc does that cause a conflict about which disc is master and results in the disc not being seen?
(Sorry if this is a silly suggestion, it doesn't take long for this technical stuff to baffle me, as you can tell)
Thanks again for your help.

Bought an app but cannot find it anymore

Hello i bought 'buzz hd' on 09/05/11 and got a receipt by email. But when i look for it in the purchased tab i cannot find it anymore.
Could you please help? Thanks.

You can download previously hidden apps regardless of version.
http://support.apple.com/kb/HT4919
If the app is not hidden and is no longer offered by the developer in the App Store, you will no longer be able to download it.

Any USB Device Installs Cannot Find Drivers - x40 SP3

I am running Windows XP SP3 on an X40 2371-HU3. I am unable to install new USB devices such as an RF mouse + keyboard and a multifunction printer. Importantly, I *am* able to connect new removable storage devices with no trouble.
The error occurs when I reach the stage of the install process where Windows prompts me to direct it to the driver. I manually direct the driver installation wizard to whatever location the driver files are located in... the wizard looks in the location, and promptly reports that there is no appropriate driver to be found.
This happens with the following USB devices:
Brother MFC-8660DN
Logitech Cordless Desktop EX 110
Belkin portable USB hub
HP OfficeJet 4255
This problem has been going on for months without me fully realizing it, so I cannot point at the installation or uninstallation of any particular piece of hardware of software that created this problem.
This one has me stumped, folks. Thanks in advance for your help.

OK I have an idea what might be going on here. Let's try this:
1. Unplug the Brother MFC-8660DN USB cable.
2. Download and install the Windows XP driver package for the MFC-8660DN from the Brother web site.
3. Plug the USB cable back in.
Windows XP includes drivers for nearly all USB storage devices, so they usually work without any additional drivers.
Windows XP cannot find drivers for the printers you list because it has none. Before plugging into USB, you have to install them from the manufacturer's web site downloads or from the CDs which came with them.
I confess I am a bit puzzled as to why XP doesn't find drivers for the USB hub - is it a fancy model? I would also have expected Windows XP to have some basic drivers for the mouse and keyboard, but usually there are manufacturer drivers which give access to more advanced features.
Hope this helps get you a step in the right direction!
I don't work for Lenovo. I'm a crazy volunteer!

App installer cannot find my phone

Similar Messages

Maybe you are looking for