App issue when installing iOS 4.3 update

I installed 4.3 today, and at the very final step it threw an error message. I had to reconnect the ipod, restore it to factory settings, and restore it to a backup.
The backup didn't have my apps or music in it, so I called Apple's support line and they were kind enough to re-initialize a download of all apps and music.
I opened itunes on my ipod, and it immediately showed all my old apps, in the "paused" mode (as in, paused from download)
Now, I had downloaded a fair number of apps over all time, and had more than could be displayed on the few home screens.
I've downloaded all visible apps and organized them into folders. My problem is that there are now still many apps offscreen in the "paused" state, which is sort of an interstitial state between not existing on the device and downloading.
I am aware that you can reboot the device to show all offscreen apps, but I am not sure if this applies to paused apps as well, and the last thing I'd want to do is mess up and lose all of those paused apps.
I've tried disabling and re-enabling restrictions several times to no effect, downloading a brand new app, and everything else that's been suggested except for rebooting the device for fear of losing those pending apps.
What would you all suggest I do? There must be some way to force it to display all offscreen apps.
This is an ipod touch 4th gen running 4.3.
Thank you very much for your help!

Hello
I think i have a similar problem to this. When i updated my iPod 2nd generation last week because i required it I found after it was all installed correctly that my apps did not work properly. For example, when i want to play a game it loads up for the first 5 seconds and then goes black and then goes back to my homescreen - AND this happens to every single app i have. It even happens when im on safari after a while. I honestly have no idea what has happened to it but before this occured it was working perfectly fine. I just know that this has something to do with the update because during the update the software was not downloaded properly and so i had to repair iTunes and re-install it.
Please HELP, i dont want my beloved iPod to break

Similar Messages

  • Hello  I upgraed my iphone to ios 7 but its dosent work like app stor dosent install any brogram or update programs and its slow and stuck plz help me

    Hello
    I upgraed my iphone to ios 7 but its dosent work like app stor dosent install any brogram or update programs and its slow and stuck plz help me

    My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
    I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the  iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
    The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
    Once I completed both restores, the sync with iTunes worked fine.

  • Issues when installing apps

    I have issues when istalling apps that I purchased of free apps that end on *.sys. Can someone help me to determine? It downloads the app but when installing gives me an "installation error" message. I checked configurations and it should allow me to install any app on the phone. Any toughts? Any one that can help me, please? This is a Nokia N8.

    Hello,
    No this had never occured the same way in CS6, Other instances of this have occured with CS6 like not being able to open PSD's in AE. But nothing where the Dynmaic Link manager would stop working.
    I realize this issue is caused by my storgae setup becuase as I stated above, when I create a new win7 user and luanched the CC Apps( After Effects, Premirere Pro, Photoshop). they work fine. ( this is becuase the user profile for the user remains on the C: drive)
    Where as my main user for my machine differs, in that the user profile exists on my D: drive ( for sake of capacity )
    All of the Apps work fine with the new user and user profile on the C: drive, but this is not really an option for me as the SSD im using will not be able to store my large amount of user files ( documents, downloads, appdata, pictures, etc.. )
    -Schoolpost

  • Why can't I install apps after I installed IOS 5? The app sits there waiting..

    Why can't I install apps after I installed IOS 5? The app sits there waiting..

    This too started to happen to me when I upgraded iOS 5 and moved to iCloud.
    I have since purchased 3 apps and got the waiting que and nothing.
    I noticed though that with my Mac on, I went to IPad settings/general/iTunes sync and sync now, suddenly the three apps started o download and install. Why it's doing this I'm not sure until I dig a bit deeper.

  • The "find my iphone" app freeze when instaling

    The app freeze when installing and now i cannot delete it

    "Losing your iPhone feels lousy. Thankfully, iCloud can help you get it back. But if it looks like that’s not going to happen, new Find My iPhone features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it."
    http://www.apple.com/icloud/features/#fmip

  • Cannot download apps to iPad since iOS 5.1 update.  Get error message "An unexpected error has occurred"

    cannot download apps to iPad since iOS 5.1 update.  Get error message "An unexpected error has occurred"

    Hi mike,
    Seems like a frustrating problem! Try restarting your device, and trying again. If that doesn't work, in settings, under store, tap your apple id at the bottom of the page, and then sign out. Sign back in again, and try again.
    Also, check you have enough remaining space on your iPad for the app you want to download, you can do this in settings, then general, then usage.
    I also reccomend buying the app in iTunes on your computer, and then syncing it to your device.
    Let me know how you get on, and I'll get back to you with further help if needed,
    Nathan

  • Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

    Good morning,
    I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
    Installation goes plain until around the end of the progress bar, it stops on the setup of
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    I've put in my SkyDrive the error log I received after the install;
    I'm at full disposal if you need further information,
    thank you in advance
    Best regards
    Francesco

    Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above: 
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
    Then, I just got my account added as Local Admin and then tried to start the service and was able to.
    However, I am not sure whether same was the case for you.
    Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

  • Can't install ios 5.1 update on my ipod touch 4gen. The message are: "Unable to install update. An error occurred insstallingiOS 5.1".... Help.....

    Cant install iOS 5.1 update on my ipod touch 4gen. The message is: "Unable to install update. An error occurred installing iOS 5.1". Please help...

    Wifi or USB update? Have you tried the other?
    Have you tried reseting the iPod? Notihng is lost?
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • I declined iCloud when installing ios 6 on my iPhone 4S. How can I change my mind now?

    When installing ios 6 on my iPhone 4S, I was having problems with my password for iCloud. So I declined to activate iCloud (and Facebook, and Twitter, and FaceTime), thinking that I would be able to activate later. But I do not find any way of going back. How can it be done?
    Thanks.
    Alain F

    Do you have an iCloud account established? If not, go to www.icloud.com and create an account for yourself then go back to your phone and try again.

  • I'm in the process of installing ios 7.1 update in my  5s and it took too long. Can i stop its installation?  Great thanks.

    Hello everyone! I'm in the process of installing ios 7.1 update in my  5s and it took too long. Can i stop its installation? Can't open my phone.. what shoudl I do?  to Great thanks.

    Help pls... thank you.

  • IPad Air Apps keep crashing after iOS 7.1 Update

    Hi, I just upgraded to ios 7.1 on my ipad air. Everything was working fine before the update. But after, everytime I try to open any app, it attempts to start, but then immediately crashes. Even when I download an app from the app store, it still crashes. I have tried everything (restart, reset, hard reset, etc.) and I can't think of anything else to do but replace it which I don't want to do.

    Hello jscott1997,
    It sounds like all your apps are closing when you open them, even new apps are doing the same thing. I recommend starting by closing all the open apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that and restart the phone and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If it persists, I would next backup your device to iTunes with this article:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    And restore it from your backup with the steps in the following article. These steps will erase, and re install the iOS software, so that when you restore from the back up it is not restoring on top of the previous iOS installation:
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • HT201413 why got occured error (1600) when instal ios 6 on iphone 3g

    why got occured error (1600) when install ios6 on iphone 3g ?

    Hi dbs5852,
    Thanks for using Apple Support Communities.  This article has information on error 1600 and may help:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check USB connections
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
    Cheers,
    - Ari

  • Error when installing the business content (update rules)

    Hi Gurus,
    I am trying to install the Business Content for Plant Maintenance. When trying to install the update rules UPDR BN10TVY8N84KARHU2FLSSYL56, I was able to see the update rules in the collected objects. But, when trying to install, it throws an error saying that the update rules is not found.
    Could you please help me in resolving the issue and install the update rules successfully.
    Thanks,
    Regards,
    -R

    You should install corresponding neccessary object with it, like update rule data target, and connected infosources also.
    infosource -> update rules -> data target
    Cross check you have infosoure, and data target installed or not, and if not install all these together.
    You can also use grouping option as install all neccesary options. It will collect all neccessary objects.

  • My ipad mini went in to recovery mode, when installing ios 8 HELP!!

    I was trying to install ios 8 when my ipad mini went in to recovery mode. please help!!

    Hey Foxamy31,
    Thanks for the question. It sounds like your iPhone is in recovery mode, meaning you’ll need to restore it with iTunes. If you previously synced/backed up with iTunes or iCloud, you might be able to restore from your backup:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • Weird issue since installing iOS 4.3

    Since I've installed iOS 4.3 my iPod Touch 4 (only about 8 months old & perfect condition) has been acting strange. It's hard to describe this issue but I've noticed little glitches here and there with some of the artwork/graphics of the OS.
    For example when my iPod is locked, on the locked screen at the top (menu bar) the lock icon becomes snowy/glitchy. I've had this happen when notifications pop up there is a background outline of a square that is also snowy.
    The graphics for some reason have a snowy and animated outline. This iPod is not hacked or dropped or anything I don't understand why this is happening. I've turned it off and turned it back on and still having the issue.
    It is NOT a major issue, it is odd though and having issues with the display on this type of device still can't be a good sign right? I've never seen this anywhere before so I thought I'd ask on here. It does go away after a few seconds.
    Here are some photos I made in Photoshop to simulate what I mean. Notice the static "noise" around the icons. Sometimes they actually flicker in an animated motion and are even bigger at times. This has only happened with pop up notifications and the lock icon as simulated. This has only happened when the device is sleep and I press the home button to find it spazzing out. It's always random, which is why I have no actual photos. When it did happen (about 4 times this evening so far) it was idle for about an hour or so until I bothered with it. If I messed with it after being idle after maybe 5-30 minutes it's normal. Other than that this issue never happens and I've a heavy user of the iPod. Here are the photos:
    http://i54.tinypic.com/2wn7if9.jpg
    http://i54.tinypic.com/33pdbwo.jpg
    Help please

    Hi,
    if you hold those two bottoms at the same time, it will simply reboot without any loss of data. It did the job for me, so I hope it will solve it for you as well. I had the exact same visual glitch you had. You need to hold them together for about 10 seconds, and then the "apple" will appear and it will reset.
    Edit: I am not sure what happens if you restore it ... I guess you will lose the data unless you back it up somehow. Well, this is the limit of my expertise I am new at Apple iOS myself
    Message was edited by: gpuliti

Maybe you are looking for

  • Spyder4Pro in Photoshop CS5 - which proof setup?

    Hello I just ran Spyder4Pro calibration on my monitor for the first time. I am using a PC. Monitor Specs: Dell SP2309W 2048*1152 Pixel Resolution 23 LCD Display VGA,DVI,HDMI connectivities on NVIDIA GeForce GTX 460 Photoshop CS5 Extended I have my mo

  • Adobe Acrobat 9 Freezes

    I have a porblem where acrobat 9 freezes when opening a pdf. What I have have managed to pick up ios that it is also not happy using roaming user accounts on MAC OS X 10.5.6 I have an Xserv server and 3 Mac Workstations as soon as I log into the work

  • MRP ignore unrestricted stock with project stock

    We are using Project Stock. When we generate reservations in Project Stock and run MRP, MRP ignors any unrestricted stock in the plant and always creates Purchase Reqs! Our MRP settings for the Material Master seem correct (zero saftey stock, etc.).

  • Very low volume from external speakers when watching Netflix

    MacBook Pro Why might external speaker volume be extremely low when it is turned up to max in Sounds and on F11?

  • WM Putaway (LM03 + Change Bin at confirmation)

    I’m trying to use standard radio frequency transaction for “<u>Putaway by TO</u>” (LM03 *) to change the destination bin for a single-step confirmation TO during confirmation, but I only get “<u>Selection not possible</u>” message. Is there any funct