App Management and Subscription Settings service applications
Hi,
I am upgradind SharePoint 2010 services to SharePoint 2013. I have updated UPS, Metadata, Search, Secure Store and now I want to configure App Management and Subscription Settings service applications.
For all upgraded services I used default IIS pool: 'SharePoint Web Services default'. But now I see that for App Management and Subscription Settings service Mifrosoft uses new iis pools in the configuration guide:
http://technet.microsoft.com/en-us/library/fp161236(v=office.15).aspx
Could you please advise if I can use defaulf pool 'SharePoint Web Services default' to configure App Management and Subscription Settings service applications?
If not can I use one pool for both services or should I use separate pool for each service?
Thanks
You cannot move the STS. Also, certain SAs right farm admin rights. If the farm will leverage those SAs, I'd encourage you to create a new App Pool for just those SAs, rather than re-use "SharePoint Web Services Default" (to prevent these SAs from
running under the Farm Admin).
http://technet.microsoft.com/en-us/library/cc263445(v=office.14).aspx
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
Subscription Settings Service Application Proxy
I am getting an error when trying to create a new Subscription Settings Service Applicatoin Proxy. Apparently, on already exists?
New-SPSubscriptionSettingsServiceApplicationProxy : A SPSubscriptionSettingsServiceApplicationProxy with id
'3cfdea27-b60c-4e2d-8de7-5c6b413c5123' already exists. Only one can exist per farm.
At line:1 char:12
+ $saProxy = New-SPSubscriptionSettingsServiceApplicationProxy -ServiceApplication ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ResourceExists: (SPSubscriptionS...pplicationProxy:SPSubscriptionS...pplicationProxy) [New-SPSubscript...pplic
ationProxy], InvalidOperationException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSubscriptionSettingsServiceApplicationProxy
How do I remove the current proxy in order to create a new one? Or associate the current one with my new Subscription Settings Service Application?if it is already exist and configured then why you want to remove it.
check # 8 &9 & 10 to verify it.
http://njbblog.blogspot.com/2012/11/sharepoint-2013-how-to-configure.html
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
I am trying to deploy a provider hosted app.
According to various articles by MSDN, I have configured the app domain, the necessary services.
When I go on deploying the app, I get this error:
Error occurred in deployment step 'Install app for SharePoint': The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
I am not able to figure out where exactly the steps have gone wrong?
When checked with ULS Log Viewer, I am able to find the cause, which says
An error occurred while contacting the subscription settings service at 'http://spsite/795a076a57c543748c151b79ffc60e6c/SubscriptionSettings.svc/optimized'.Hi,
I assume you have seen this article:
http://technet.microsoft.com/en-us/library/fp161236.aspx and that you created the Subscription Shared Service. Are you on the released version of SharePoint?
Try stopping and restarting the subscription service from central admin.
Cheers
Yina -
Initiall SharePoint Server 2013 setup -- unable to manage new User Profile Service Application
During initial farm setup, creating an initial User Profile Service Application works fine. However, once it's created, I cannot 'manage' it through the Manage Service Applications page in central
admin.
I get a generic error (Sorry, something went wrong / unexpected error) with a correlation ID that doesn't seem to match any ULS log entries. (Yes, I merged logs from all machines in the farm.)
A Windows event log entry says:
A failure was reported when trying to invoke a service application: Endpoint Failure
Also frequent errors in ULS logs: (see below)
UserProfileApplicationNotAvailableException
User Profile Application Proxy failed to retrieve partitions from User Profile Application: Micro…
SPDistributedCache DataCacheException
I did notice that the file 'ProfileService.svc does not exist in SharePoint's web services app at the URL you see in the error. (below)
I also found it interesting that the event log error shows 1 active endpoint and 3 failed endpoints. I have 2 WFEs and 2 app servers. But I'm only trying to get the user profile service app running on the application
servers. I have deleted and recreated this service app several times under various names (deleted/recreated its app pool as well) and wonder if these other failed endpoints could be orphans from previous instances...
Any thoughts on how I might successfully create this service application? I've already been Binging my head against a wall long enough that I would have been better off reinstalling the entire farm... I may still
do that.
FYI, my farm came from a slipstreamed SP1 install package, and received the July CU after several other things were already configured, including the already-failed UP service application.
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 8/8/2014 6:11:54 PM
Event ID: 8313
Task Category:
Topology
Level: Error
Keywords:
User: xyz\sp_farm
Computer: spapp1.xyz.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: w3wp
Process ID: 4284
AppDomain Name: /LM/W3SVC/560632691/ROOT-1-130519915587486075
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>8313</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>13</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-08-08T23:11:54.738080000Z" />
<EventRecordID>14550</EventRecordID>
<Correlation ActivityID="{02A1AC9C-1125-6026-E124-A52653003266}" />
<Execution ProcessID="4284" ThreadID="16072" />
<Channel>Application</Channel>
<Computer>spapp1</Computer>
<Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
<Data Name="string0">EndpointFailure</Data>
<Data Name="string1">w3wp</Data>
<Data Name="int2">4284</Data>
<Data Name="string3">/LM/W3SVC/560632691/ROOT-1-130519915587486075</Data>
<Data Name="int4">2</Data>
<Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
<Data Name="int6">1</Data>
<Data Name="int7">3</Data>
<Data Name="string8">http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 8/8/2014 6:51:04 PM
Event ID: 8313
Task Category: Topology
Level: Error
Keywords:
User: VANTAGE\sp_farm
Computer: spapp1.vantage.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: OWSTIMER
Process ID: 8472
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>8313</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>13</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-08-08T23:51:04.938901900Z" />
<EventRecordID>14596</EventRecordID>
<Correlation />
<Execution ProcessID="8472" ThreadID="17360" />
<Channel>Application</Channel>
<Computer>spapp1.vantage.local</Computer>
<Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
<Data Name="string0">EndpointFailure</Data>
<Data Name="string1">OWSTIMER</Data>
<Data Name="int2">8472</Data>
<Data Name="string3">DefaultDomain</Data>
<Data Name="int4">1</Data>
<Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
<Data Name="int6">1</Data>
<Data Name="int7">3</Data>
<Data Name="string8">http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
20:22:31.94 SharePoint Portal Server User Profiles cm6y High
User Profile Application Proxy failed to retrieve partitions from User Profile Application: Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048 at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext)
20:22:38.16 SharePoint Portal Server User Profiles d22b High
Failure retrieving application ID for User Profile Application Proxy 'User Profile Service Application': Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048 at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_AppID()
20:22:44.25 SharePoint Foundation DistributedCache ah24v High
[Forced due to logging gap, cached @ 08/08/2014 20:22:38.16, Original Level: Verbose] DistributedCacheClient TransportProperties- ChannelInitializationTimeout '{0}', ConnectionBufferSize '{1}',
MaxBufferPoolSize '{2}', MaxBufferSize '{3}', MaxOutputDelay '{4}',ReceiveTimeout '{5}'.
20:22:55.26 SharePoint Foundation DistributedCache ah24w Unexpected
Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0006>:There
is a temporary failure. Please retry later. (One or more specified cache servers are unavailable, which could be caused by busy network or servers. For on-premises cache clusters, also verify the following conditions. Ensure that security permission has been
granted for this client account, and check that the AppFabric Caching Service is allowed through the firewall on all cache hosts. Also the MaxBufferSize on the server must be greater than or equal to the serialized object size sent from the client.). Additional
Information : The client was trying to com...Thanks for the suggestion. I performed the service restarts, and then an iisreset an the two web servers, and the application server that does not run the services. Finally, I ran iisreset on the application server that does run the services.
After performing those steps, I still cannot manage the user profile service application.
ULS log at the time of the attempt contains User Profile Application Proxy errors (in my original post) and am also noticing the following error:
08:15:21.17 SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException:
This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator. at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ManageUserProfileServiceApplicationBase.OnPreRender(EventArgs e) at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean
includeStag... -
How to remove farm account from Application Discovery and Load Balancer Service Application
Hello Community
Using Sharpoint 2010 Server I think the reason
the User Profile Synchronization would stop is because somehow the farm
account was registered as a managed account. So I removed the farm
account from all services that ran under the farm account so that I could
run Remove-SPManagedAccount or click the Remove icon in manage service accounts
and then unregisted farm account as a managed account.
But before I can run Remove-SPManagedAccount I need to remove it from one more
service account that uses the farm account which is:
"Application Discovery and Load Balanceer Service Account".
However, nothing seems to remove it from there.
I tried :
"get-spserviceapplication | where {$_.TypeName -match "Application Discovery and Load Balancer Service Application"}
and then
"stop-spserviceinstance "dde7fbef-b068-4687-bedb-f67230efab5a"
amongst a host of other methods so that I could ultimately
unregister farm account as a managed account.
But no matter what I do when I try to remove the farm account from Application Discovery
and Load Balancer Service Application
and then unregister the farm account as a managed account a message always says
"Application Discovery and Load Balancer Service Application" is using the farm account
as its service account.
What can I do to free the farm account from Application Discovery and Load Balancer Service Application?
Thank you
ShabeautThe Farm Account is always a Managed Account and can never be "unmanaged". You don't have to set the automatic password roll.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
As I mentioned in subject, I am just wondering Whether the java component (Not
ejb, not servlet) can be deployed in App Server and get the services provided
by App Server or not?Nevermind folks - I got it to work. All my configuration was correct; I had other issues with the ejb-jar file that the verifier informed me of (my previous deployments were with the verifier turned-off).
-
I have full membership to CC and have been using it for 4 months. Randomly Photoshop stopped opening jpgs, so I uninstalled and re-installed. Photoshop then stopped working all together. I signed out of the app manager and when I signed back in all my info was gone and only "TRIAL VERSIONS" of CC apps were available. I paid for this software. I need to be able to download it again.
Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,
If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time . -
DB Autogrowth settings - Service Applications and content DBs
Hi - is there any documentation out there that provides specifics for the initial size and autogrowth settings for the SP2013 service application databases?
I'm aware that the content DBs will vary and thus impossible to define settings except to note that autogrowth needs to be set in MB not %. But for service app DBs surely there must be some guidelines on initial sizing?
Thanks
JNope. If anything it's even harder to define.
A search service database might be a couple of hundred Meg for one customer and another may have to scale it out to multiple databases. MMS can vary hugely in scale and scope as can most of the other service apps.
The main thing to note for service apps is that they have custom fill levels for the index. That means you shouldn't use any one-size-fits-all re-index processes as you were able to do in 2010.
My general advice is not to bother with tuning the Service App databases. Only start worrying about them when you're really pushed on performance. -
hi,
We have deployed Sharepoint 2013 in hosting mode. And i followed this
guide. And i have 1 web server, 1 app server and 1 DB server. My Application server is logging 2 critical event after every 15 min.
Event ID: 1502, Task Category: Timer Job, Source: SharePoint Translation Services
"Timer job '735da5fd-a74a-46b8-9a75-70e85d125eb2' for service application 'Translation Service Application' is failing to execute. More information is included below.
Object reference not set to an instance of an object. "
Followed by this one one more critical event,
Event ID: 6398, Task Category: Timer , Source: SharePoint Foundation
"The Execute method of job definition Microsoft.Office.TranslationServices.QueueJob (ID 735da5fd-a74a-46b8-9a75-70e85d125eb2) threw an exception. More information is included below.
Object reference not set to an instance of an object."
I tried to search everywhere, but no solution. Because of this two critical events AppFabricCaching service is also crashing.
Any suggestion how i can fix this?
SaMHi SaM,
According to your error message, it says that the Timer job '735da5fd-a74a-46b8-9a75-70e85d125eb2' for service application 'Translation Service Application' fail to create due to some referred object cannot
be found. For this issue, it can be caused by missing assembly .
Could you please provide detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
Here is a blog you can have a look:
http://powerpivotgeek.com/2010/10/04/bug-cannot-install-powerpivot-if-a-sql-server-shared-folder-has-been-specified-in-a-previous-installation-to-other-than-the-default-folder/
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Lost Use of App Manager and Updates after Windows 8 install
I recently purchased Windows 8 and now the Adobe Application Manager will not run on my computer. In addtion, I am unable to update photoshop and several other CS6 programs. Does anyone have a fix for this?
A lot of security updates along with .NET 4.5 should be installed before all programs run correctly on your computer. When Windows updates shows no more updates, then you should be good to go as far I'm guessing.
-
Downgraded back to CS6, App Manager demanding Subscription reactivation?
I've installed CS6 successfully on my iMac and everything is working fine. I install CS6 the very same way on my MBA and I can't open my apps because my 'subscription needs to be renewed'.
Help? I need Flash to do my work today.The fix was to create a new Adobe ID and then register the license. My current Adobe ID created a conflict with authentication.
-
Task Manager and/or Grocery List application ideas?
Looking for Task Manager and Grocery List applications that will sync my Mac with my iPhone. Do you know of any? Zenbe is not really what I am looking for.
EVERNOTE
Have you looked at evernote? Syncs over the air with the desktop client. You can create notes, checklists (with checkboxes) and even audio notes that all sync.
I use it more for notes, as I use Remeber the Milk for to do... but Evernote might be worth looking at, it is free. -
X6 Apps Manager and Battery indicator
Hi, have been using my phone for a few days now. So far it's pretty good. I've only got a few minor problems, but they are annoying me.
1-Battery indicator shows five bars all day, until I turn the phone off and on again and then goes down to three. I did that just now and after a few minutes it went back up to four bars. Is this a common problem?
2-this is for any vodafone users, my vodafone app manager always asks to be updated whenever I go into it, but it's at the latest version. any ideas on how to get it to stop?
Thanks in advance for replies.mestaton wrote:
Hi, have been using my phone for a few days now. So far it's pretty good. I've only got a few minor problems, but they are annoying me.
1-Battery indicator shows five bars all day, until I turn the phone off and on again and then goes down to three. I did that just now and after a few minutes it went back up to four bars. Is this a common problem?
2-this is for any vodafone users, my vodafone app manager always asks to be updated whenever I go into it, but it's at the latest version. any ideas on how to get it to stop?
Thanks in advance for replies.
For 2 see here:
http://forum.vodafone.co.uk/forum-23/announcement-124-vodafone-app-manager-fix/ -
Desktop apps moved and General settings app moved
My 2 year old daughter loves the ipad and plays games, watches cartoons, etc. I set up restrictions under the general settings for her safety. Some how she or one of my family members moved or deleted some of the apps including general settings. How can I get my apps and general settings back? I scrolled and did not see the general settings app to reset desktop apps. Thanks in advance.
They can't be deleted, as they are native to iPad. If you have scrolled to additional pages on your iPad and still can't find them, you can use the search function to find them, or you can connect to your laptop and find them in iTunes and move them where you want. To find them using search, with your home screen open, hit the home button once and the search bar will appear. Type in the name of the app and it will bring it up.
Maybe you are looking for
-
How to archieve table contents?
Hi All, I want to archieve (move) some DB table contents to another custom table. I got to know that some 'Relocation Program' has to be run to move this contents. The same can be revert back to original table after re-running the relocation program.
-
Hi All, We have a requirement to send out alerts on tRFC monitor when SM58 (report RSARFCRD) queue reaches over 20. We run 4.5B and I do not find an easy setup on CCMS. Is there any easy approach to this? All useful answers will be rewarded. Cheers,
-
How do you smooth out keyframes?
I used the record button and tracked text with a object on the video. When the text moves across the canvas it is jittery because of so many keyframes. How do I fix that? Also how do I select a bunch of keyframes at once on the canvas? Every time I t
-
Setting the same CPU for processor Affinity and I/O affinity..
Hi All, I have a server with two sql server instances and 32 CPU in which I have to give 16 CPU - 16 CPU to each SQL instance. each CPU has both processor Affinity and I/O affinity. As per Microsoft we should not assign both processor Affinity and
-
when opening a new tab , press control plus T CTrl+T,, why is it blank page, how ca i set it to be on yahoo or google