App. Module and Instances, relationship, need help.
Hi,
Let me explain my situation. I created two instances, one from "APasesDati" VO and another from "LVAIKolekcijaDati" VO. Each of these instances have subinstances. So. One day needed to connect these instances with relationship, one to one, so that I can navigate between these instances in my jspx pages. For example, I see one instances third record, and when I navigate to another page, I need to see second instances third record. So I created ViewLink "APasesDati via LVAIKolekcijaDati_APasesDati". My task You, can see in the following picture, it is better to illustrate my situation, pleas see:
http://my.jetscreenshot.com/2677/20110407-lkvs-94kb
If something is not clear, please let me know and I will explain You.
Hope for Your help. Best regards, Debuger!
Edited by: Debuger on Apr 7, 2011 10:22 PM
Edited by: Debuger on Apr 8, 2011 3:30 AM
In principle, there are only one way to do my task!? I can add LVAIKolekcijaDati via APasesDati as instance and move APasesDati child elements under that. Am I right? And if my jspx page is created from APasesDati instance and now I want to use my new - LVAIKolekcijaDati via APasesDati then I need to reecreate my jspx page from begining, or I can change something in my jspx page or somewhere else something that way I do not to recreate my jspx page and use LVAIKolekcijaDati via APasesDati in my page?
Best regards, Debuger!
Similar Messages
-
Please I'm from Ecuador and I can't put my credit card en App Store. Please I need help
Please I'm from Ecuador and I can't put my credit card en App Store. Please I need help
Contact iTunes Customer Service
Apple Support iTunes Store Contact Us -
i have printers at home and work. i need help programing my macbook print utility so computer knows which printer to use depending on where i am. thanks
Look for cloud solutions such as DropBox, OneDrive, SugarSync or others. They are all cloud based services that sync documents between computers via the cloud. Of course another solution is simply a flash drive formatted in exFat so that Macs and Windows computers can read it.
-
ok so... I just download the App Store for Mac because I wanted to play games and stuff, so I have the Apple ID, and I have iTunes, but once I clicked on a free app to down load it says "Your request is temporarily unable to be processed.Please try again later." and then 2 seconds later it says "We could not complete your request.There was an error in the App Store. Please try again later. (100)" so yepp i need help... plezz
Maybe it is down. Try tomorrow.
Are you visually impaired? If not, please do not write posts in ridiculously large type. -
Unifying web apps, modules and apps for better discoverability
Hi guys,
With the rise of open platform apps, and the growth of the developer ecosystem, we are facing a few challenges impacting user experience and apps visibility. The main ones that we see are:
Increase the app market place visibility inside the BC admin console
Reduce the confusion among beginners and SBOs generated by the two very similar concepts (web apps & modules) to which add a third one (open admin apps)
Reduce the barriers in front of partners looking for additional functionally so that we increase apps sales to the app developer’s benefit
One way we’re looking to solve this is to unify the Module & Web Apps entries into a single one called Apps, to which we’ll also add the open admin apps. From this Apps top level entry, partners will be able to see the list of apps (on the long run, the current BC modules will also become apps), add a web app and browse the app market to purchase and install custom apps.
The main benefit of this approach will be a really fast and easy discovery of apps and the app market, which will make it easier for new partners to understand the concepts and also drive more apps sales. The downsides (cause this is not a perfect solution) are that those of you who have built training videos need to reshoot some of the, to take this menu change into consideration and the mix of the custom app with web apps.
What do think about that, or what would you suggest us to do to provide better apps visibility and discoverability.
Regards,
CristinelHi Christenel,
I understand what you are trying to do and I think it's a good initiative, but I partiall agree with Liam. The Modules and Webapps should remain where they are.
1. Modules are each an indiviual type of functionality that work in a very specific way. They cannot be changed and are core features of the BC system to meet a very confined function.
2. Webapps are a piece of functionality that also work in a very specific way however, they can be modified to meet a specific need within a set of confined boundries. Simlar to modules they cannot be modified outside their acutal scope. The UX is generic and cannot be customised hence it sits in the middle of a Module and an App but they can be built of the fly. From an non-developer partner, this is a very important difference.
3. Apps ( or what ever they are called) site outside the the scope or boundries of Modules and Webapps and can be complety tailored to meet a specific need as well as being an extension BC capabilities. They don't necessary have to rely on BC functionality.
I can create an App that is in-fact a Webapp, or an App that is a completely independant of BC functionality, or re-write an entire module or existing piece of functionality (like an ecommerce app or a News Module).
With the App Marketplace you are not only going to have a variety of products meeting different business needs, but also work and be styled completly different to each other as no UX can be the same without some sort of overlying UI framework. This will become very confusing when the experience in BC become's a hap-hazard collection of different UI's and UX's.
I have to think more about this by my proposal would be to keep things the way they are but have an App Market Place where you can browse download Apps and install them to the specific area like a module, webapp, ecommerce, CRM etc. BUT the UI needs to be consistent.
The core modules of BC is what's used in any CMS. What I would love to see is BC release the Events Module for example, which I can download, customised to suit my needs and replace the current module with the additional features that I want or have been asking for over the past several years. Like adding an event end date with my own custom tag that I can add it for the additional fields. While still keeping the core functionality like list views, and tags.
My last point is that my understanding is that BC was not going to get involved with an App Marketplace? Has this position changed? and how does this affect Brent's works? -
FB app closing by itself, I need help
So its been about 3 weeks since I updated my FB app on my Iphone4, and for some reason it keeps closing by itself, I am getting annoyed by the fact that every time I want to use the app it just closes. I already tried deleting the app, downloading it again, and I do not what else to do. Please I need help!!
Can I do this "fix" myself, or at least buy the part somewhere so that someone else who is good with computers can do it for me?
This is the solution other people with this problem had.
Computer repair sent one user this message "Tested without touch panel, hdd, ram, keyboard light. Ordered new motherboard, however discovered that the computer started fine without touchpanel, seems like on/off switch is oversensitive.
Power membrane switch is replaced, and everything is checked and OK."
So- power membrane was to blame, and I guess this is just the "underneath" section of the panel of the external power, volume buttons at the top of my key board right?
"Yes my issue was resolved. They replaced the power button strip above the keyboard which has eliminated the random shutdowns. Funny thing is that they had it less than 24 hours and seems like the "failure analysis engineer" immediately knew what the problem was. I feel sorry for the uneducated who fork over money for unneeded repairs."
So, since Toshiba seems to try to make you pay 400 dollars to replace a motherboard etc. which won't fix the true problem, is there a site where I can buy the power membrane for my laptop, then take the computer and a part to a repair shop and they will do it? -
ITunes App Store Gift Card, I need help, really.
Okay, so I got two iTunes giftcards for Christmas, yes a while ago. But now, I needed the iTunes cash, so I redeemed them. Well, the first one, was $10, I got my money fine. Now, this one is $15. Now, here's the problem, I need help. I have two major things to say, first off, I peeled the stupid label off (I think peel it stupid, it should be scratch) and some parts of the letters got peeled off, but that's not the huge issue. The issue is I think some whole number/letters got peeled off, because the code is like thing NNNNN NNNNNNN NNN. Okay, I'm not saying the code, for obvious reason, but "N" just means number or letter. So basically there are 5 characters, space, 7 characters, space, then 3. I think this is odd, because my other code was on whole code, not spaces. Also, the spaces have room for other characters. Some letters are also messed up a bit, like an "M" is losing a bit of the leg to the right. Then a S, is missing basically a whole half. Now, can someone tell me if the code for App Store is supposed to be 5, 7, 3. If not, can I get a refund, or a new card from Apple?
Click here and submit a request.
(56608) -
Wish I didn't upgrade! and now I need help to figure out how to make it wor
I have a Windows XP Pro 2nd edition with IE ver 6.0.2 (but I normally use FireFox)
I've never had any trouble with iTunes until iTunes "forced" me to upgrade my iTunes applicaiton to version 6 if I wanted to "purchase" music. (note to self: Purchase music from stores it's much safer)...
I upgraded and received no error messages. Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
I have uninstalled and installed 5 different times and ways.
First uninstall was "typical" uninstall. THat didn't fix it.
Second uninstall was "typical" unistall from the Control Panel, and then I removed the folders from the "program File" folder. Still wouldn't work.
Third unintall was "typical" then I removed folders from local drive and removed all "known" registry "itune" keys. That didn't work.
Fourth uninstall was first a "repair" to itunes, and then a "typical" uninstall, then I removed folders, removed registry (does anyone know all of itunes registry keys? Maybe I am missing a few.. the only ones I know of is the "itune" reg). Then I looked through my start up menu from "msconfig" and took a look at my firewall program to see if there was anything preventing the program from running...
Fifth uninstall pretty much fruitless as my previous attempts.
I know it HAS to be a registry key of some sort.. here's why:
When I uninstall and reinstall (no matter how thourough) every time I install the iTunes program Windows XP has never ONCE recognized the new install of iTunes as a "NEW PROGRAM" and it should!
I need help... what registry keys should I be removing? ANyone suggest for me to remove Quick Time too? What about the ipod updater software? Any connection?
HELP??????????????????
THanks
W.hi wmchisholm!
Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
hmmm. is itunes.exe persisting in Task Manager? if so, first check up on these two possibilities:
iTunes 6 won't open on a Windows computer if firewall software is not up-to-date
iTunes for Windows doesn't open after upgrading
but if itunes.exe is disappearing after a few seconds, try the following technique:
Using MSCONFIG to troubleshoot conflicts in Windows
... and let us know the names (exact spelling please) of the start-up items that you had to disable in order to get itunes to launch. (there's a nasty piece of malware out there that has been causing "error-less" itunes launch failures since late October.)
love, b -
I recently sold my iphone 4s back to att and they whiped it clean and now i have a galaxy s5 and my brother still has the iphone but when he sends me texts they dont always go through and i need help on what to do next
See if this helps:
iMesssage to old phone
If you move to another phone and forget to turn off iMessage then read “if you no longer have the device inhttp://support.apple.com/kb/HT5661 If you still cannot resolve it call Apple http://support.apple.com/kb/HE57
To deactivate iMessage http://support.apple.com/kb/ts5185
Read http://m.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00053450&fm_s eq=62995 -
I have a Imac and i cant acces adminastrator Becuase my two users dont have becuase i took them i dident know that would happen and need help i dont wanna loose all the stuff in the imac so if you can help please message me asp
Use the directions given here:
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ -
No ACL deny logs for Traffic not matched by Static Object NATs and ACL. Need Help.
I start noticing that I do not see any denied traffic coming in on my ACL. To better explain, lets say I have this config.
### Sample Config ###
object network webserver
host 192.168.1.50
nat (dmz, outside) static X.X.X.X service tcp www www
access-list inbound extended permit ip any4 object webserver eq www
If I generate a traffic from the outside let's say a traffic that is trying to access X.X.X.X via TCP Port 8080 which obviously does not have any NAT entry to it going to my DMZ, I don't see the ACL denies it anymore but instead comes back with a Drop Reason: (nat-no-xlate-to-pat-pool) . On the packet trace I got this. (Below) it seems that does not even hit the ACL as there is no xlate found for it, at least to what the drop reason says.
Phase: 1
Type: CAPTURE
Subtype:
Result: ALLOW
Config:
Additional Information:
MAC Access list
Phase: 2
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 Outside
Result:
input-interface: Outside
input-status: up
input-line-status: up
output-interface: Outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (nat-no-xlate-to-pat-pool) Connection to PAT address without pre-existing xlate
Before, using a regular Static PAT on ASA Versions 8.2(5) below, I could get the deny logs (ASA-4-106023). Generally, I use these logs, and are quite important for us specially during auditing.
My question is how can I generate logs for these type of dropped traffic on the ASA 9.1 Version?
Any comments/suggestions are gladly appreciated :)
Regards,
JohnI believe, but am not 100% sure, that the reason you are not seeing the ACL drop but a no NAT matched is because of the changes from 8.2 to 8.3 in the order of how things are done. In 8.3 and later you need to secify the real IP address when allowing packets in, and this is because NAT happens before the ACL is matched. So since there is no match on the NAT the packet is dropped then and there, never reaching the stage where ACLs are checked.
As to seeing drops in the ACL log...You might want to try adding an ACL that matches the NATed IP...but I don't think you will have much success with that either. My guess is that there is no way around this...at least no way I know of.
Please remember to select a correct answer and rate helpful posts -
Few errror/doubts in Primary and Standby server - Need Help
Hi All,
I am having below doubts/errors. I need help to solve all the below questions.
I configured Dataguard successfully. Now the sync is upto date using the below parameters (using 11g):
at primary:
log_archive_dest_1=
log_archive_dest_2='SERVICE=standby.123 arch'
standby_file_management=auto
at sandby:
log_archive_dest_1=
standby_file_management=auto
Still i face below messages in the alertliog. Can anybody clearly explain me all the points.
Primary:
ORA-1652: unable to extend temp segment by 640 in tablespace NEWTEMP
I get this error when my archvie destination got filled up, later we released the enough space, the archived are generating. Still i see this message once in between. Need to solve this.
Primary:
Checkpoint not complete ( i see this message very often, want to get rid of this)
standby:
kcrrvslf: active RFS archival for log thread 1 sequence (sometimes i see this KCRRVSLF)
standby:
check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain afequate log switch information to resolve archivelog gaps. (also get this message in between the alertlog file in standby)
Standby:
FAL[client]: Error fetching gap sequence, no FAL server specified (this is very often message. How to remove this, what needs to be added. Do i need to add the below parameters)
FAL_CLIENT
FAL_SERVER
Thanks in advance.
Pas Moh
[email protected]Pas Moh wrote:
Hi All,
I am having below doubts/errors. I need help to solve all the below questions.
I configured Dataguard successfully. Now the sync is upto date using the below parameters (using 11g):
at primary:
log_archive_dest_1=
log_archive_dest_2='SERVICE=standby.123 arch'
standby_file_management=auto
at sandby:
log_archive_dest_1=
standby_file_management=auto
Still i face below messages in the alertliog. Can anybody clearly explain me all the points.
Primary:
ORA-1652: unable to extend temp segment by 640 in tablespace NEWTEMP
I get this error when my archvie destination got filled up, later we released the enough space, the archived are generating. Still i see this message once in between. Need to solve this.This error has absolutely nothing to do with the handling of archive logs, the status of archivelog destination, or primary/standby. Any relation you thought you saw was pure coincidence.
>
>
Primary:
Checkpoint not complete ( i see this message very often, want to get rid of this)
Here is the very first hit I got when I googled "oracle checkpoint not complete". Tom says it better than I would have.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:69012348056
standby:
kcrrvslf: active RFS archival for log thread 1 sequence (sometimes i see this KCRRVSLF)
A quick google of that one, and it looks like it is not even an error, but rather simply an informative
>
standby:
check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain afequate log switch information to resolve archivelog gaps. (also get this message in between the alertlog file in standby)
In that case I would check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain adequate log switch information to resolve archivelog gaps.
How big is that? Well, at least bigger than it is now. Beyond that, it would have to be "large enough to maintain adequate log switch information to resolve archivelog gaps" Just play with it until you get the result you want.
>
Standby:
FAL[client]: Error fetching gap sequence, no FAL server specified (this is very often message. How to remove this, what needs to be added. Do i need to add the below parameters)
FAL_CLIENT
FAL_SERVER
Thanks in advance.
Pas Moh
[email protected] -
I have EMS 3.5 installed and functioning. Need help with where to go next!
Hello All,
I am brand new to this and need a very basic push in the right direction.
I have FMS 3.5 installed on my server and I am ready to begin testing with it.
My website has a page with descriptions of videos and links to those videos.
When a link is selected, I want a new page to open and the video to play in the FMS player.
I have absolutely no idea how to go about this. I need some meaty information here. I read tom Green's tutorials, and although I found that they were informative, they are also quite general.
I have Flash Professional CS4 and I just need to know what the heck to do next.
Any and all help will be supremely appreciated.
Sincerely,
wordmanGentlemen,
Thank you for the answers, I will definitely look into what you both suggested.
My next step is getting a player into a separate page that plays selected videos through RTMP.
The player that comes with FMS would be fine, but I do not know how to alter it, change colors, etc.
Then I was looking into Real Eyes' REOPS player, and the white papers alone stopped me in my tracks. I realize it's probably easy, but now ehrn you are a novice, to understand it.
Then I saw Adobe Strobe, the OSMF-based player and thought that might be good for me.
The biggest problem I see is that Adobe's resources are not always easy to find on this website, same goes fo rthe OSMF site. Not very well structured sites for a software company.
Bottom line is, I need to get a player on a page that plays though RTMP. Any thoughts there? I'm completely new to Flash.
Thank you all!!!
Sincerely,
wordman -
I urgently require help in recovering my user password for my MacBook Pro on OS X Lion, I forgot my password and Apple ID recoveries aren't enabled and I can't enable them as I don't know my password and my hint didn't help me at all, I really, really need help!
Also, a solution may be found if you search in the "More Like This" section over in the right column.Solution may be found if you search in the "More Like This" section over in the right column.
-
Hi there,
I have bought yearly subscription for Tech suite which expires in May 2015, however I am unable to download or install/activate it. I am paying monthly however cant use it!
need help- Is there an email or phone number I can reach ---
Thanks
-VanitaBobLevine wrote:
[....] If you find something out, please do come back and update us.
Thanks for your willingness to help, but I got some great news!!!
I finally managed to find the cause for that deactivation problem. It's called the "Update Root Certificates" component, which somehow was unchecked on my machine. Although I had previously installed the Adobe HTTPS (SSL) certificate for secure connections between my computer and Adobe servers, used while signing in on my account, each time I had to click YES to confirm manually that this certificate was valid and safe.
Now, while deactivating from an application, such confirmation is not displayed and therefore the application considers a certificate (and thus connection as well) as invalid or unsafe. The result is: "Internet Not Found... Unable to Connect..." message.
Here's what I did to fix it:
1. clicked Start, and then pointed to Settings and then clicked Control Panel
2. double-clicked Add or Remove Programs
3. clicked Add/Remove Windows Components (on the left)
4. scrolled down the list of components to Update Root Certificates, and checked the check box for that component
5. clicked Next, and followed the instructions to complete the Windows Components Wizard.
After turning that on, the deactivation was almost like a blink of an eye.
So if anyone has a similar problem, make sure you have that system component turned on.
Matt
Maybe you are looking for
-
As stated, I used the reset feature in Firefox and immediately afterward the icon on all of my PDF files changed to the Firefox icon. Hopefully Mozilla is working on a fix for this??
-
I have a macbook air bought in 2008 and am unsure if it can be upgraded to maverick. Is there a serial number beyond which it is possible to upgrade? I know that first I need to upgrade to mountain lion or some other fierce cat. The model identifie
-
How to display a listView vertically with multi columns?
Hi, Refer to the sample HTML ListView item templates sample. If I want to display the listView (in scenario1.html) in three columns with vertical scroll bar, what should I do? I try to change 'layout' property of listView from 'GridLayout' to 'ListL
-
How to Generate a Spacer Item in 10.1.3
10.1.3.2 JDev, 10.1.3.1.26 JHS. Scenario: a two-column region where a couple items on the right need to have blank spaces between them so they line up with certain items on the left. In 10.1.2 and before, we created non-base table VO attributes, set
-
ADF Controller in non-jdeveloper environment
Hello, I have been using adf faces in eclipse environment with the JSF Controller (faces-config.xml). I need now to implement use case with adf task flows and for this purpose I need to configure the adf controller to be used (adfc-config.xml). I cop