"App Name" failed to Install message

I had an App which needed to be updated.. I made all the changes and created an IPA file via DPS App Builder. But when I try to load it to my iPad via ITunes I get a message "App Name" failed to Install.
I tired to recreate the certificates and provisioning files and tried again, still get the same message. I had no problems with the origianl App.
Any help or suggestions are greatly appreciated as this is now becoming urgent!
Thank.

Check your folio resolution. It should be 1024x786, 2048x1536.
Recreate certificates from scratch with new app ID (Do not use "*" in App ID e.g com.company.*). Make sure that you have unchecked iCloud in App ID section.
Provision your devices (Add device UDID and device name in Devices section).
Recreate App with new certificates.
Delete the old syncd app in iPad.
Sync new .ipa
Install
Also test your app in content viewer. There may be a chances that the app is not valid if you are unable to test it on content viewer also.

Similar Messages

Before i updated to ios6 i took off all my apps into iTunes and then when i went to put them back in on my ipod it says " 'app name' failed to install" anyone know whats wrong?

before i updated to ios6 i took off all my apps and put them into iTunes and then when i went to put them back in it says syncing like normal then when i look on my ipod it says " 'app name' failed to install" anyone know whats wrong?

In iTUnes 7....
Connect the ipod. On the ipod summery page hit the "Music" tab. Set it to "Auto update select" and check the playlist you want on the ipod then hit "Apply" in the bottom righthand corner

Itunes sync app name failed to install

I am having problems with installing an app with an ipa onto my iphone 4s. Whenever I drag the ipa into itunes and hit sync, my iphone has a message that says itunes sync <appname> failed to install. The app appears on my phone is half way finished installing and then this error pops up. please help.

Recreate your Mobile provisioning files. Make sure that while creating the MP files, you have not enabled for iclould and have checked your device to be included in the Mobile provisioning file.

ITunes Synx "app name" failed to install

So i get this error when i am trying to sync my apps from my pc to ipod. Ipod iOS is 5.0.1 (9A405) iTunes version is latest..Some1 plz help me..

Is that the exact wording of the error message? What is Synx?
In the future, it is better to respond to your previous unanswered post to bump it up rather than starting a new post.

When i try to transfer apps from itunes to my iphone 4s it comes Itunes sync "app name " failed to instal plaese help

I tried tried and tried but it didn't come , pls help

How is your iPod configured to sync music? In other words, what options and configurations do you have enabled from under your iPod's Summary and Music tabs in iTunes?
Maybe have a look at this article as well to verify your iPod is set up for syncing music.
iTunes: Syncing media content to iOS devices and iPod
B-rock

Application Manager failed to install message

I'm upgrading from PS CS6 to PS CC. When I begin the download process, I get an error message saying that App Manager failed to install. When I start the download I briefly get a message saying that the installer had a problem because another instance of App Manager was already running. That message disappears almost immediately and the install proceeds. The progress bar gets about 1/2 way done when the error message appears. I rebooted my machine (HP, quad core, 8 gig, Windows 7, running with admin privelages) just in case a stray app was running, but I continue to get this error message each time I try to install CC. PS CS6 works fine as does LR 5.

I have solved my problem, but the solution was considerably easier than the one detailed in the above referenced posting. I was surprised at the number of people expressing similar issues as mine, but no obvious easy answer was ever offered. When I didn't get any response to my forum posting, I decided to do some searching on my own. When i looked at the system requitements for downloading and installing this app, I noticed a brief statement saying that when you install a single application, like PS CC, the process should first install CC Desktop. The note stated that you could install it separately from the downloads. However, if it doesn't already exist on the system, the application will install it itselft. This did not happen when I attempted to install PS CC. The installer did try to install Application Manager (not CC Desktop) and it ran into the problems I mentioned in my oriiginal posting. So, I went back to the downloads section and manually installed CC Desktop. Once it was installed (more about problems encountered with this installation below) I was able to install PS CC from the desktop application just fine. I repeated this process on my laptop, ran into the same issues, and resolved them by first manually installing CC Desktop. PS CC now runs fine on both systems.
Installing CC Desktop had its own challenges. when I first tried to install it, the process proceeded for about 5 minutes, the porgress bar got about 1/2 way done and then I got a message saying that the installation failed and that I needed to first close all browsers. And then the installation quit. OK.Not sure why the installer couldn't have detected that the browser was open and instruct me to close it before continuing the installation process, but it didn't. It just failed. I closed my browser (IE 9), and tried again. This time I got a message saying that the installation failed because it needed admin privileges, this despite the fact that I'm the sole admiin on my machines. I tried one more time. This time I right clicked on the installation app and chose "Run as Administrator" and sure enough, the installation proceeded just fine. This seemed redunandant as I was already logged in as an admin, but no matter, it worked and now am successfully running PS CC.
This has been a very strange experience. I have been used to enjoying rock solid installations on all of my Adobe products. This time, however, the process was ridiculously convoluted and obtuse. Clearly the developers need to revisit this and try to fix the problem as it seems to be fairly common. Obviously I don't know if my work around is specific to my circumstances or represents a design flaw. Either way it was no where near as easy as it should have been.
On the flip side, once I got CC Desktop installed, I have been quite impressed w/ the one-stop shopping I enjoy for installing and upgrading my products. The application suggested I needed to upgrade my copy of PS CS6, which I did and that upgrade went flawlessly. So, once the installation hassles get resolved, I do think this is good way to manage my Adobe applications.

When I try to test my app the IPhone says "'%app title%' failed to install."

When I try to test my app the IPhone says " '%app title%' failed to install."
How do I fix this?
My install method is:
* Open ITunes.
* Drag my app to the IPhone.
* Ta-da the IPhone says "'%app title%' failed to instal."
Has anyone had this problem? If so how did you fix it?
Thanks!
~Jeremiah

You might have to check the prov profile and type of your certificate. The error you stated might arise in following cases.
Certificate id and app ID (in the app.xml) does not match.
The certificate and prov profile should match the cause. Distribution / Testing.
Select suitable option while packaging. Adhoc / App store distribution.
Make sure the correct device UDID was used for your certificate.
I went wrong in (2) when I built my first app which costed me the same error as yours.
I felt FB could have been more organized in this process. I felt XCODE edged over FB in this.

App-V apps intermittantly fail to install via SCCM

Hi,
I have a few sequenced apps deployed using SCCM to our work computers. These apps are deployed to User collections. When a new computer is brought online they intermittently fail to install, however if you manually 'retry' the installation in
Software Center, after the 4th or 5th attempt of retrying they install successfully. Some apps fail to automatically install far more than others with one app failing to install consistently.
When the apps fail to install the streaming-transport debug log shows errors for Auto-Proxy detection and failure to send or receive HTTP responses to the distribution point full path to the .appv package file. Send failures return an HResult of 0x80190193.
Receive failures return an HResult of 0x80190193 or 0x80072f0c.
The AppEnforce.log file returns an HResult of 80190193 and "The provided URL could not be resolved. Please check that the URL is valid." I assumed this to be the FQDN part of the command line that points at the DP package location.
The bit that puzzles me the most is that if it was a problem with the DP then surely none of the apps would install, and certainly a persisting with a manual 'retry' wouldn't produce a successful install result.
We use a proxy server. AutoDetect proxy settings in IE is disabled and the FQDN of the Site Server/Distribution Point has been added to the Intranet Zone in IE. If I tell IE not to use a proxy at all I still get the same errors (including the
auto proxy detection error) in the Streaming-transport debug log for the apps that have failed to install.
The App-V 5 deployment types are all configured to stream rather than download and run. If I switch them to 'download and run' they all consistently install without errors.
App-V clients are configured to use 'shared cache mode' and 'package scripts' is enabled.
Our environment is as follows: SCCM 2012 SP1 running on Server 2012. App-V 5 SP1 clients installed on Windows 7 Enterprise with SP1.
Any ideas as to what is going on would be welcomed as I've been tearing my hair out with this for a week!
Event logs - server and domain names have been changed - Streaming-Transport debug log:
Event ID 85
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      85
Task Category: Transport request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
Auto proxy detection for URL
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv failed with status Unknown HResult Error code: 0x80072f94
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>85</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.223458300Z" />
    <EventRecordID>472</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="StringValue">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
    <Data Name="Status">-2147012716</Data>
</EventData>
</Event>
Event ID 66
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      66
Task Category: Transport request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
HTTP response receipt from
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv failed. Status: Unknown HResult Error code: 0x80072f0c
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>66</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.312531300Z" />
    <EventRecordID>476</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="Status">-2147012852</Data>
    <Data Name="URL">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
</EventData>
</Event>
Event ID 67
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      67
Task Category: Transport request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
HTTP request from
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv failed. Status: Unknown HResult Error code: 0x80190193
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>67</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.325397400Z" />
    <EventRecordID>478</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="Status">-2145844845</Data>
    <Data Name="URL">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
</EventData>
</Event>
Event ID 110
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      110
Task Category: Transport stream request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
Http Send request on URI
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv with header failed with status Unknown HResult Error code: 0x80190193.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>110</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.325397400Z" />
    <EventRecordID>479</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="URI">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
    <Data Name="Header">
    </Data>
    <Data Name="Status">-2145844845</Data>
</EventData>
</Event>
Error in AppEnforce.log
<![LOG[The AppV 5X client is configured for use with ConfigMgr.]LOG]!><time="10:07:38.954-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appvclientconfig5x.cpp:64">
<![LOG[The package with GUID efaa1d42-dc70-4fc0-8976-fb692e83c395 is not installed on this machine yet]LOG]!><time="10:07:38.964-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552"
file="appvpackagequery5x.cpp:177">
<![LOG[Package: WinRAR 4.20 Win7 x64 with version GUID 6d7400fc-169b-4fa1-b292-29fdac24cae4 is not installed. Will install it]LOG]!><time="10:07:38.965-60" date="08-28-2013" component="AppEnforce" context=""
type="1" thread="2552" file="appv5xhandler.cpp:459">
<![LOG[Configure the package WinRAR 4.20 Win7 x64 as streaming. Use content ID Content_5f364464-dd13-4bb2-8142-3c41850f5e49 and content version 1]LOG]!><time="10:07:38.965-60" date="08-28-2013" component="AppEnforce" context=""
type="1" thread="2552" file="appv5xhandler.cpp:475">
<![LOG[Using content path <a href="https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv]LOG]!><time="10:07:39.206-60">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv]LOG]!><time="10:07:39.206-60"
date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appv5xhandler.cpp:494">
<![LOG[Running App-V command ["C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage
-Path 'https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv' -DynamicDeploymentConfiguration 'C:\Windows\ccmcache\4\WinRAR_420_Win7x64_DeploymentConfig.xml'] for the machine]LOG]!><time="10:07:39.211-60"
date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appvcommandutil.cpp:117">
<![LOG[    Executing Command line: "C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';
Add-AppvClientPackage -Path 'https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv' -DynamicDeploymentConfiguration 'C:\Windows\ccmcache\4\WinRAR_420_Win7x64_DeploymentConfig.xml' with system
context]LOG]!><time="10:07:39.211-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appexcnlib.cpp:345">
<![LOG[    Process 3948 terminated with exitcode: 1]LOG]!><time="10:07:42.823-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appexcnlib.cpp:431">
<![LOG[Here is the error message generated by the process:
Add-AppvClientPackage : The provided URL could not be resolved. Please check
that the URL is valid. HRESULT: 80190193.
At line:1 char:106
+ import-module 'C:\Program Files\Microsoft Application
Virtualization\Client\Appv ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : NotSpecified: (:) [Add-AppvClientPackage], COMEx
   ception
    + FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Micr
   osoft.AppV.AppvClientPowerShell.AddAppvPackage
]LOG]!><time="10:07:42.823-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appexcnlib.cpp:441">
<![LOG[AppV command ["C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path
'https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv' -DynamicDeploymentConfiguration 'C:\Windows\ccmcache\4\WinRAR_420_Win7x64_DeploymentConfig.xml'] failed with return code 1.]LOG]!><time="10:07:42.823-60"
date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appvcommandutil.cpp:128">
<![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="10:07:42.824-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appvcommandutil.cpp:154">
<![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="10:07:42.824-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appvmanage5x.cpp:86">
<![LOG[    CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="10:07:42.824-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appv5xhandler.cpp:646">
<![LOG[++++++ App enforcement completed (4 seconds) for App DT "WinRAR 4.20 Win7 x64" [ScopeId_86A33434-E76B-408D-8910-C2EADC8E3BA0/DeploymentType_93e3e297-e10c-421e-a178-fe43212b1bde], Revision: 2, User SID: S-1-5-21-3578899820-3203048151-3782333795-4928]
++++++]LOG]!><time="10:07:42.826-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appprovider.cpp:2366">

Hey Tim,
Since we're targeting vmware view machines in floating pools with roaming profiles we can't really go live with download and execute as the users will stab away at the dead shortcuts and raise calls with service desk until their apps finish downloading.
Going to try and resolve the intermittent Add-AppvClientPackage
and
Publish-AppvClientPackage
and return to the SSL issue later.

Why do I keep having an app that fails to install, after syncing with iTunes on my computer?

One or two months ago, I purchased EA's game 'Need for Speed Most Wanted', when it was on special for $1.29 NZ. I downloaded the app onto my iPod touch (4th generation 8GB), and later synced the app with my computer. A few weeks later I deleted this app from my iPod to free up some space (this is around a 1.8GB app by the way). In the past few days I have tried syncing this app from the computer to my iPod. Every time I sync, the app loads fine, and starts installing for a few minutes, but then comes up with a message saying: 'Most Wanted' failed to install. If I try syncing the app several more times, I then get a message saying: 'Unable to Download Item. The operation couldn't be completed (SSMobileInstallationErrorDomain error -402620393.)'. I am using a Windows 7 laptop with the latest version of iTunes. My iPod is running iOS 6.1.3. I have two apple id's, the first being signed in on my laptop, and the second being signed in on my iPod. The id's are both authorised with the laptop, and my iPod is associated with both id's as a device. I don't think this would have contributed to the problem though. This has become very frustrating! Can anyone please help?

How much free storag do y have on the iPod? I would try freeing up more and try syncing again.
If your country allows redownloading app, then delete the app from the computer and redownload and sync
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Try redownloading directly to the iPod. Note you wil need about 5.4 GB free on the iPod.
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Why does app mgr "fail to install" when it tries to update itself?

I have reinstalled the app mgr, as instructed on the CC web site, as it was supposedly corrupted (although it worked fine a couple of hours ago). Whenever I try to download PS CC, the app mgr goes through trying to update itself and "fails to install," so I can't even begin to download any other app. (Running Windows 7 on a Dell laptop, 64-bit. I have several CS6 apps.)

Arpit,
There is no app mgr in the Control Panel list of programs; it is gone. (Of
course, I've purchased the LR 5 upgrade, and it is not on the list either,
though it is installed, not from the Cloud, and seems to work.) There is a
newly downloaded app mgr 7.0 shortcut on my desktop, but it can't find the
program itself. There's an app mgr updater that runs its course; but since
the app can't be found, it's hard to know what it is updating. Trying to
download anything (even just the Creative Cloud desktop connection) from
the web site doesn't work--clicking a download button produces nothing at
all, not even an error message.
CC Cleaner does not give an option to clean the CC items without also
working on CS6 apps. I do NOT want to risk losing or corrupting my various
CS6 apps or the data associated with them.
My Cloud files are still fine, but I can't upload anything new or download
anything that's there.
There really needs to be a solution to this situation that does not require
large transfers of data or the risk of losing older (and functioning)
programs.

Help App update failing to install

For some reason my iPad 2 iOS 7.0.3 (11B511) is having problems with the latest update to the Twitter App, taking it to version 5.12. Whatever I do the App running on iPad continues to operate Twitter version 5.11.1
The update to 5.12 does appear. I click to download, it appears to download but it fails to install. There is no error message to give a clue to the cause of this problem.
iPad has 8GB of available space. This is what I have tried so far ... None of which have solved the problem.
1. Completely closing the Twitter App and the App Store. Deleting the Twitter App, re-booting iPad and then reinstall from the App Store App, which displays under Purchased Apps, Twitter v 5.12. Despite this it installs v 5.11 then offers the update, which appears to go through the motions of downloading and installing, but when I check the App it is still operating v5.11 as the enhancements included in v 5.12 are not there.
2. Checking the App Store App updates Tab shows Twitter v5.12 with an option to Open. Once again this only opens v5.11
3. I have tried deleting my Twitter Account and repeating this process, all to no avail.
4. I have also tried deleting the Twitter App from iPad, which should remove all of its data in theory. Then going to iTunes on my PC, and downloading version 5.12. Then syncing iPad with iTunes and installing Twitter from there, but it still stubbornly insists on running the previous version.
This is very frustrating ... I also have an iPhone, running iOS 7.0.3 (11B511) Twitter version 5.12 has installed on that with no problems. I particularly like the picture previews which this update to Twitter brings and would love to have this facility on iPad too.
Is there a fix to this problem with the failing update on iPad? Help appreciated.

Hi CalAmity,
Which OS are you using? Also let us know the exact error message?
Additionally you may try to apply the updates manually:
Win: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
Mac: http://prodesigntools.com/adobe-cc-updates-direct-links-mac.html
Kindly follow the very important instructions before download.
Regards,
Romit Sinha

TS1702 app's will not install, message reads newer OS required or not compatible with ipod

I have just updated my old ipod touch and after restore failing I have had to setup as new ipod, but now can not intall all my apps. i have tried installing app from store and message reads app not compatible with ipod or newer OS required.

Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also, to find compatilbe apps:
VintApps 3.1.3 for iPhone, iPod touch, and iPad on the iTunes App Store
apps for ios 4.2.1: Apple Support Communities
Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club
HT4972 Touch Game 4.2.1 Apps: Apple Support Communities
apps for 4.2.1 (also works for 3.1.3)
Tip - Finding 4.2.1 apps that work on an...: Apple Support Communities
4.2.1 iPod 2nd generation unable to use any...: Apple Support Communities

Im trying to download an app for my ipod touch, but when the sync is over i look at my screen and it says the app has fail to install

i have a 4th gen ipod touch, im teying to download an app to it, so i click sync. the sync finishes and when i look at my ipod its still installing, then it says the app has failed to download. any help?

Right, what App are you trying to download? What iPod touch have you got? 1st Gen., 2nd Gen., 3rd Gen or 4th Gen? Also what version of iOS are you running?

App Manager fails to install

In CS6 Design and Web Premium, after installing, when I try to start Application Manager, it says it is updating itself, but that ends with the message that it 'failed to install'. Any ideas?

Sparta I would recommend reviewing the installation log files for the update which is failing. You can find details on how to locate and interpret your installation log files at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

App Updates failing to install

Hi,
I had a notification that 2 app updates were ready to install from adobe cloud, and yesterday i installed them,(Premier Pro and Indesign). Today, there is a notification again for the same apps but when i pressed 'install all', it said the installation had 'failed'. It suggested to try again because the downloads appeared corrupted. Why is this and is there anything I should do?
Thanks

Hi CalAmity,
Which OS are you using? Also let us know the exact error message?
Additionally you may try to apply the updates manually:
Win: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
Mac: http://prodesigntools.com/adobe-cc-updates-direct-links-mac.html
Kindly follow the very important instructions before download.
Regards,
Romit Sinha

"App Name" failed to Install message

Similar Messages

Maybe you are looking for