App No Longer Works After Creating EJB Session Bean

I am using EJB3.0 and using JDEV 11g, PS1. I have used EJB to create my entities from tables and then i created my ejb diagram. After doing that my application (i have a jspx page) that runs fine. Once I create my session bean, I am no longer able to run my application. After creating my session bean I get the following error when I run the application (i.e. not at build/compile time).
<Feb 12, 2010 3:28:57 PM PST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1266017332257' for task '5'. Error is: 'java.lang.ClassNotFoundException: javax.faces.webapp.ConverterELTag'
java.lang.ClassNotFoundException: javax.faces.webapp.ConverterELTag
If i delete the sessionejb.java, ejbbean.java, and the ejblocal.java files, I am able to run my application again. Am I missing something or is this a bug?
Thanks.

Did you solved the problemn? I'm getting this, when I try run my App doesn't work, but if I deploy to WLS Integrated and go to URL it's work...

Similar Messages

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

Apps no longer work after installing ipad2 update 4.3.5

Apps no longer work after installing IPad 2 update 4.3.5

i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

BC4J, JSP, accesing a remote app module deployed as an 8i EJB session bean

hi everybody,
i am reposting this question since the thread went somewhat off-topic ...
i have successfully deployed my Jdev 3.2 developed app module to my remote 8.1.7 db server as an EJB session bean
i am able to test it via the Business Components Tester ...
i am also able to test it from my wizard-generated Business Components JSP App using DataWebBeans ...
but when i try to access it from a JSP data tag page I get the following error:
Excepcisn:
javax.servlet.jsp.JspException: JBO-28300: Piggyback read error
void periodoswebtags_html.PeriodoView_Browse._jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void oracle.jsp.app.JspApplication.dispatchRequest(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.JspServlet.doDispatch(oracle.jsp.app.JspRequestContext)
void oracle.jsp.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void oracle.jsp.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void oracle.lite.web.JupServlet.service(oracle.lite.web.JupRequest, oracle.lite.web.JupResponse)
void oracle.lite.web.MimeServletHandler.handle(oracle.lite.web.JupApplication, java.lang.String, int, oracle.lite.web.JupRequest, oracle.lite.web.JupResponse)
void oracle.lite.web.JupApplication.service(oracle.lite.web.JupRequest, oracle.lite.web.JupResponse)
void oracle.lite.web.JupHandler.handle(oracle.lite.web.JupRequest, oracle.lite.web.JupResponse)
void oracle.lite.web.HTTPServer.process(oracle.lite.web.JupRequest, oracle.lite.web.JupResponse)
boolean oracle.lite.web.HTTPServer.handleRequest(oracle.lite.web.JupInputStream, oracle.lite.web.JupOutputStream)
boolean oracle.lite.web.JupServer.handle(oracle.lite.web.JupInputStream, oracle.lite.web.JupOutputStream)
void oracle.lite.web.SocketListener.process(java.net.Socket)
void oracle.lite.web.SocketListener$ReqHandler.run()
and the JBO-28300 error is undocumented ... :(
i have included a library containing the <mybcs>CommonEJB.jar and <myappmodule>EJBClient.jar files into my JSP projects
the JSP data tag page is a wizard-generated trivial browse page
TIA,
p

hi everybody,
just fixed ... :) ...
i added the following libraries to my JSP data tag project and everythig works fine ...
Oracle XML Parser 2.0
JBO Runtime
SQLJ Runtime
HTH,
p

Android remote iTunes app no longer works after 10.5.2 upgrade.

Until the 10.5.2 iTunes update, I was able to use the Android app, Remote for iTunes, to enable my Android tabs to control iTunes on my Windows 7 machine. After this upgrade, my tablets no longer show up as "devices" in iTunes. Am I the only one to experience this?

Thanks for your replies.
I don't think I described my problem adequately. Before updating to 10.5.2 the clamshell mode worked correctly: I closed the lid, waited 30 seconds, then touched the keyboard and - presto! - the cinema display came alive with the desktop shown. I understand how the clamshell mode is supposed to work because it used to work just fine.
My problem now is that it no longer works the way it is supposed to. If I wait 30 seconds after closing the lid of the MBP and then touch / attach an external keyboard, nothing happens. I am following the proper steps to use clamshell mode (at least the steps that previously worked), but they do not appear to be effective any longer.
I appreciate the advice I have received about how the clamshell mode is supposed to work. Unfortunately, following those standard steps is not leading to successful operation in clamshell mode.
Thanks,
Danny

Mail App no longer working after 2.0 upgrade

I upgraded to 2.0 on my IPhone Edge and now my mail application no longer works AT ALL. If I try to open it, it simply shows me a blank mail screen, waits for a few seconds and then returns to the home screen. Strangely enough, I have been able to send email photos using the camera application.
Email is the most important application for me on the iPhone! Has anyone encountered this problem? Is there a fix available?

I recently stopped by the apple store and have fixed my mail app! The problem as described to me was caused by a installing apps. Turns out that apps can mess with Mail setting in some way and perhaps due to a bad setting or a bad combination of settings my mail application stopped working. The way I fixed it was to do a restore to New Iphone which, unfortunately, wipes everything! But after syncing back up including re-installing all of my apps, mail works again! Of course, I lost all of my notes, various settings, and lots of other stuff. Turns out that a simple restore, since it backs up your phone beforehand (backing up bad settings at the same time) is not the silver bullet but a full restore to new iphone probably often is. Hope this helps others.

Installed Apps No Longer Work After 3.1.3 Upgrade

Last night I upgraded to 3.1.3, and since then NONE of the Apps that I installed works... Each time I try to open any of them, it will open and stop just as quickly, taking me back to the Home screen...
I thought at first it was only the Apps that required Internet Access (IM and/or Email Apps)... However, I was able to open a web page using Safari, and the Email App included in iPhone STILL works... And, like it would normally do, it would check first for a local wireless network, and switch to 3G if it does not find one... However, in this case, when trying any of the Apps I've installed, it does not even check at all for a network or 3G, the Apps just shut down just as quickly as I launch them...
Since then I've discovered that ALL the Apps I've downloaded and installed prior to the upgrade no longer work...
I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
Any information would be appreciated...
Thanks for your time...

TainoV2 wrote:
I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
Did you try a reboot (by means of BOTH the Sleep and Home buttons and holding both IGNORING the slide to turn off, and keep holding until you finally see the Apple Logo?)
Message was edited by: DaVBMan

My Spreadsheet App no longer works after downloading the new ios7 software update.

My spreadsheet app. on my iphone 5 ( that i had been using) is no longer working since the new ios7 update. So how can i solve this problem?

check whether the App is compatible with ios 7, contact the app developer, or wait for the app update.

3rd Party Apps No Longer Work After Update

I just got my iPhone today and installed a few apps, Cube and GuitarChords. Both apps were working fine earlier. Later I connected the phone to my PC and it requested that I perform an update to v2.2, which I did. After the update, neither app would start. When I pressed the icon, it seemed to start for a few seconds then went back to the main screen. I reinstalled the apps and GuitarChords worked, but Cube still wouldn't start. I then did a hard reset (holding home and lock button) and now neither app will open again. All the apple apps start fine. Can anyone tell me what I need to do to get the apps working again?
On a similar note, how would you guys rate the stability of the iPhone at this time. I mostly use my phone for business, so if it's still pretty buggy I'd like to return it and get back on my Win Mobile phone for now. Thanks in advance!

IT DID IT AGAIN!!!
I didn't change or update anything. I was using the Touch Term ssh client this morning and it was working fine. I tried using Win Admin later this afternoon and it wouldn't start, none of the 3rd party apps would. Again I tried the soft and hard resets. I even tried resetting the phone in the general menu. After looking around online, I see that this is an extremely common issue. I'm going to return the iPhone tomorrow and have my Tilt reactivated.
I don't know if Apple monitors these forums, but if so they should take note; if they intend to make a dent in the enterprise market, stability needs to be a top priority. Sure, Windows Mobile doesn't have a very pretty or friendly interface, but it's quite reliable. In the year that I had my Tilt, it crashed once, and that was the fault of buggy software I had installed. Honestly, this being the first Apple product I've personally owned leaves a poor impression of the brand. I know Apple can do better, I manage several Macs at work and I almost never get support calls from those users. I really like the iPhone, and hopefully Apple can get their priorities straight and work out the issues, as I would like to give it another go in the future.
Thank you again to those who responded to my question earlier.

Garmin ANT+ agent app no longer works after upgrading to Yosemite

Hi,
I have ANT Agent for my Garmin watch (version 2.2.2 - latest) which worked perfectly in Mavericks but no longer works in Yosemite.
Can anyone help?

ewaller wrote:
Hello,
Welcome to the forums. Your post is fine in every way. Introduction, problem description, what you have done -- perfect. The package you reference is from the AUR which, as you know, is not in the main stream Arch distribution. These community contributions are essential Arch, but have their own area in the forum to differentiate them.
Moving this thread to AUR issues...
As it turns out. This isn't a bug in AUR/easystroke. It is a bug in the latest xserver 1.10.902 (found in the "extra" repo) Many applications are affected. Opera, chrome (if you are using the mouse gestures features for navigation) and it turns out that while i thought Maya wasn't affected, in reality, it is totally affected. most applications that use a mouse with right-clicks, middle clicks do not work properly.
it's an upstream bug, that affects all distributions using the latest Xorg. I am not filing a bug report, because as i understand it, this bug has already been reported upstream by Ubuntu-devs (on launchpad).
that latest update for Xserver, should have been tested better, before being an update available through pacman.
On my system, i do not use any testing repos, only core, extra, and community. I do this to avoid situations, just like this. lol.
I have work i need to get done today, but unfortunately, the only way that could happen is if i downgrade xserver (which i don't think is a smart idea). So, i guess i must wait for the next xserver update for arch. hopefully this happens in the next 24hours.
I suppose i will have to use OSX for now, until this is properly addressed and fixed.
anyway, i just wanted to point out that this bug has nothing to do (specifically) with Easystroke or AUR, that is just how i first noticed the bug. ( i just wanted to point that out, as you are a moderator ). This bug is in the main repos for Arch, and anyone updating today (or yesterday) will be affected, if they use applications where it's noticable.
jordan

Many Apps no longer working after software update

I recently updated my iPhone software and since then many of my apps don't work. usually wat happens is that when i click on an app the screen will go black for a few seconds then go back to my home page.

Many applications aren't yet update for compatibility with the 3.0 software... that could be a part of the problem with some of your apps.
Suggest you try the following 2 steps. Do the first step and see if that fixes the problem If not, do the second.
Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the Sleep/Wake until the Apple logo appears.
Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

IPhone remote app no longer working after iPhone update to version 4.2.1

I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
"Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
Home sharing is enabled on all the Apple TV devices
I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
Suggestions ?

Update:
Issue is still occuring, after resetting wireless router.
Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

IPhone 4 apps no longer work after upgrade to OS 5.0.1

After upgrading to 5.0.1 through iTunes, downloaded apps will no longer boot. I get a flash, then nothing.
Of course, Apple wants $70 to tell me how to fix this.
Has anyone else had this problem? Any suggestions? Hard reboots don't work.

Some Users have Reported that a Restore as New has helped Resolve issues...
Set Up as New Device
http://support.apple.com/kb/HT4137

Streaming Apps no longer work after Gingerbread update

Hi Folks,
Add this to the list of weirdness after the 2.3.4 update...I have some apps that I use to listen to streaming media, like AMR Radio and iCatholic Radio. Ever since the 2.3.4 update they will not stream anymore. They seem to run just fine, you press play and it says that it's buffering audio and then...nothing. No error messages or anything just won't play. I have already done a FR on the DINC and that did nothing to fix it.
I also can no longer stream audio or video files that are up on my DropBox and that used to work fine under FroYo as well. What gives? BTW - this is true whether I am on 3G or WiFi.
Anyone else seeing this? Even better, anyone have a fix?
thanks!

You can try clearing the data for the app by going to Settings / Applications / Manage Applications / (App Name) / Clear Data or you can uninstall the app and reinstall the app because when you update with some apps installed it saves the settings from the previous OS and this is known to cause issues and this is why I suggest to hard reset before OS update..
Try the options above and see if it helps...

App No Longer Works After Creating EJB Session Bean

Similar Messages

Maybe you are looking for