App Object Run Order Not Honored

Currently we use 'Wait on force run' and 'Determine force run order' to deliver applications in the order required. This was working okay until recently and I am unable to identify why.
Our configuration has application delivery timer start that is set to Run Order 0 and then another application delivery timer end that is set to 850 after the last application object in the run order list. Previously the timer would start up, then all the applications would deliver and finally the application timer end would shut down the timer.
Now the application timer starts and ends in the same minute then some NALs continue to run after the timer ends. This is problematic because we have applications that depend the delivery of support files and if a user opens the file before the files are written then application is not configured correctly.
Visual of application delivery and NALDIAG proves that the applications are not being rolled out based on 'Determine force run order'.
Any suggestions are greatly appreciated as this has become a globally impacting issue.

msmithdavis,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

App object run order

Is there any way to set the order in which app objects are run on the workstation other than using the "Wait on Force Run" and "Determine Force Run Order" options?
Thanks...

In Short, If you chain apps, when you launch one it will ensure all of the
others are installed as well.
Example - You might have a bunch of apps that point to spreadsheet files and
you may link/chain those to an Office Bundle so that if Office is not
installed, it will instll office and then open the spreadsheet.
Or you may have an application that requires .NET and JAVA. Chain your apps
to your .NET and JAVA installs and when you install your app that requires
the others, it will install those as well.
http://www.novell.com/documentation/...a/af1ms6k.html
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"ncharleyhog" <[email protected]> wrote in message
news:[email protected]..
>
> what do you mean by "chain apps"?
>
>
> --
> ncharleyhog
> ------------------------------------------------------------------------
> ncharleyhog's Profile: http://forums.novell.com/member.php?userid=18514
> View this thread: http://forums.novell.com/showthread.php?t=395350
>

The App Nike Running is not working well with my Ipod touch 5 th generation It always gives me the wrong distance and velocity. Is it normal? What could I do?

The App Nike Running is not working well with my Ipod touch 5 th generation It always gives me the wrong distance and velocity. Is it normal? What could I do?

Are you using the shoe sensor?
Try:
http://www.apple.com/support/nikeplus/troubleshooting/

Business Object "Service Order" not found in Web Service Tool

Dear Experts,
We're trying to create a web service for Service Order via Web Service Tool,
but we can't find the business object "Service Order" there.
How to step to reproduce the problem:
1. Logon CRM WEBUI with the business role ITSERVICEPRO.
(or T-cd:BSP_WD_CMPWB > Enter component WS_DESIGN_TOOL > Test)
2. Go to Service Operations>Web Service
3. Create a new Web Service
-> In "Service Objects" area at step 1 "Select Objects", there's a drop down list box of "Business Object".
In this list, "Service Order" does not exist.
Other objects such as "Service Confirmation", "Service Order Quotation" etc are available.
How can we create a new web service for Service Order?
Any advise would be highly apprecaited.
Best regards,
F.T.

Hello Rocca,
It is hard coded in FM CRM_SALESDOCUMENT_FILTER that the item which is assigned to object type BUS2000140 would be removed from the upload relevant item list.
To get it replicated, I am afraid that you need to modify the relevant coding here.
Best regards,
Maggie

Office 2013 click-to-run does not honor deselecting 'Make Outlook the default program' checkbox

We use an email client other than Microsoft Outlook (let's say Thunderbird)
Thunderbird is set as the default mail client for the machine (HKLM\Software\Clients\Mail\(default) set appropriately)
Occasionally, we launch Outlook (but absolutely do not want it as the default mail client for the machine). About 30 seconds after launching Outlook, we see that the Windows default mail client changes to Microsoft Outlook.The 'Make Outlook the default
program for E-mail, Contacts, and Calendar' checkbox in File->Options is disabled.
Further investigation with ProcMon indicates that a SYSTEM service called integrator.exe starts up about 30 seconds after we launch Outlook. This service changes the HKLM\Software\Clients\Mail\(default) registry key to be Microsoft Outlook.
We have tested with multiple non-Outlook email clients, and the behavior is always the same.
This only happens on click-to-run installs of Office 2013. Regular installs of Office 2013 do not have the problem. Older versions of Outlook do not have the problem.
What can we do to get Outlook to honor the 'Make Outlook the default program' setting?

Kapaal -
Thanks for your reply. Your blog post would certainly work if this was just a user-mode app that was making the change, but that's not the case with Office 2013.
The integrator.exe process that is making the change is part of Microsoft's Click-to-Run system. It runs as a service with local system access, and thus would have full access to the key. I might be able to lock it down by creating a second system
admin account and playing games with it - but that will make it very difficult to actually change the value when I want it do be changed, and I really shouldn't have to be doing workarounds to prevent Office itself from doing this.
- Kevin

HT201210 iPad replaced a month ago and now no apps will run. Not sure which iOS I am on but there is no update option in general settings. Help plead. Otherwise this is a paperweight!,

Need help

Select Settings>General>About and look at Version. This will show what version of iOS is installed. Post back with the version & then we can provide some suggestions.
 Cheers, Tom

Colorblind users can't tell what apps are running

There needs to be a setting under Dock Preferences to CHANGE THE COLOR of the dot under running applications in the Dock.
I know the dot is there because I asked where the arrows went in the Apple Store and they told me it was there. After straining and squinting, I can almost see it. This is NOT ACCEPTABLE.
With my color blind situation, I can no longer tell what apps are running or not. I have to press command-option-escape for force quit just to see what is running.
Either bring back the Tiger black arrow, or allow a preference so that color blind users can tell what is going on.

You bring up an excellent point but no one at Apple who can make the change is likely reading Discussions. Put in a request for the Dock improvement at Apple OS X Feedback where it will be put in Apple's system for user requests.
http://www.apple.com/macosx/feedback/

Running zwsreg.exe as an app object or schedule that runs everytime nal refreshes.

Hi,
I'm not a 'heavy' novell user. I do the lower level things. But
here's my problem that I can't for the life of me figure out.
Our workstation registration process runs on login. It will remove the
workstation every 40 days. It is a large manufacturing fascility.
Many of the tools don't allow the workstations to log out and back in
within that time frame.
I'm trying to figure out a way to 'schedule' the zwsreg.exe to run as a
normal user in the background and unregister if it's registered, then
register the workstation so we can remote connect to them without
running into workstations that have become 'unregistered'. I can run
the zwsreg from the command line easy enough. But it seems there are
problems with either mapping or file rights when i try to put it in a
batch file or run it right as an app object. Has anyone ran into this
situation before and found a solution?
I'd have no problem I guess using the workstation scheduler, but that
doesn't have rights when a user is logged in to register :(
Thanks,
Bill w.

Do you have these shop floor workstations under a separate workstation
policy? You could add a "Scheduled Action Policy" for those workstations
with zwsreg as the action, and schedule it to run, say weekly.
Or you could just move those workstations into a different container that
the workstation removal policy doesn't specify... that way the won't be
removed every 40 days... or ever.
-Adam

Open Purchase Orders not considered as requirement for MRP Run

Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
Saravanan

Can you check to see if there is a re-order point set up for this materia? That could be causing the problem too.

MRP Run can not create Planned order to Sales order

Hi,
I have a problem with planning run to sales order. We have a configurable material which have make to order strategy. MRP Run does not create planned order to some of our sales order. I think it has relation with schedule lines but i can not understand the problem.
If schedule line has 1 as confirmed quantity MRP run can not plan but 0 as confirmed quantity MRP Run creates planned order. How can i solve this problem?
Regards,
techmastere

Hi,
Order for which qty is confirming, check which schedule line is determined and which requirement type system is determining.
then in VOV6 for schedule line tick mark availability check & Transfer of requirement
for requirement class OVZG tick mark availability check & Transfer of requirement
Note: if schedule line is not relevent for availability check & ToR then system always defaul confirm quantity.
kapil

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

Error: Object type '' could not be generated when creating sales order

Hello Friends,
I am using a SAP standard ITS service to create sales order.
When I am creatin SO, it gives me error Object type '' could not be generated.
Can you plz suggest me what is that issue & how I can reslove it.
Regards,
Narendra

any inputs around this plz??

My imac is running mountain lion and last night i downloaded maverick. in midst of installing it it said a powerPC app microsoft word would not work so i canceled the install for the time being. my questions is if i choose to finish installing maverick

my imac is running mountain lion and last night i downloaded maverick. in midst of installing it, it said a powerPC app microsoft word would not work so i canceled the install for the time being. my questions is if i choose to finish installing maverick does that mean i will nevver be able to access word documents stored on my desktop? or do the word docs automatically convert to pages or what? i am so confused. would i be better off just sticking with mountain lion and send the maverick install to the trash? hoping someone will be able to answer my question though i am afraid the response is likely to be just stick with mountain lion so you can keep using word. i had been looking forward to maverick but it seems pretty drastic to not have access to microsoft word anymore by switching to maverick. hope someone has an answer so i can have the best of both worlds so to speak!

thanks for your response Csound1 on the peninsula ... if i go ahead and install maverick and then download LibreOffice or OpenOffice will i then be able to access old microsoft word saved documents on my deskstop through those two free alternatives? i am not that knowledgeable about these things so i am not sure if you are saying i will just be able to use libreoffice or openoffice for creating new documents or whether i can access the saved microsoft docs? are they transferred to OO or LO or what and if editing of the old word docs is needed can i do that through the OO and LO programs or apps (see i am not even sure if i am using the correct vocabulary!) hope you can answer this as quick as the first question, so i can decide to stick with mountain lion and trash the maverick install or proceed with maverick install and hoppe that my microsoft word docs are still accessible through OO or LO or adding to myquestion will pages on maverick be able to open the old word documents? thanks again!

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I want to report a problem an IN app purchase i did not order

I was charged for an IN -App purchase I did not order or want .It was purechased on my Itunes store credit.How do i get my credit Refunded.Thanks

There is no guarantee as all sales are final but that would be the best bet.
Or you can contact iTunes through here
http://www.apple.com/support/itunes/contact/

App Object Run Order Not Honored

Similar Messages

Maybe you are looking for