App plan use data plan or iphone 5 have gps unit?

I use the plan app this week and I take road whit out cell service and my plan app
Work correctly. The iphone 5 have gps or it take data plan?

    Hey ccasteel89!
If Serena gets a phone hug then I'm hoping that I can get some love to with the information provided. Right off the bat, $570 is data charges would also have me going into cardiac arrest so I appreciate your concern. From the sound of things, it seems that the representative you worked with filed a billing investigation (and that's exactly what needed to be done). Have you received your call and resolution yet?
In regards to your question, there is one thing I would like to check with your device. Do you have the most up to date iOS 6.1 software? You can check by going to settings > general > software update. This should help a great deal.
EvanO_VZW
VZW Support
Follow Us On Twitter @VZWSupport

Similar Messages

  • I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

  • I am using a very old iphone and have forgotten my password. Is there anyway to get passed the lockout screen?

    I am using a very old iPhone and have forgotten my password. Is there anyway to get passed the lockout screen? It says to connect to iTunes but when I do nothing happens. I've read through the user guide and am at a loss.

    Bypass & Reset the iPhone Passcode
    Disconnect the USB cable from the iPhone, leave the other end connected to your Mac/PC
    Launch iTunes
    Press and hold the Home and Power button on the top of the iPhone to turn off the device
    Press and continue to hold the Home button while you reconnect the USB cable to your iPhone, this will cause the iPhone to turn on
    Continue to hold the Home button until an alert message in iTunes appears that an iPhone in recovery mode has been detected
    Now that the iPhone is in recovery mode, you must restore the device:
    From iTunes, look under the “Summary” tab
    Click on the “Restore” button within iTunes

  • HT1495 how to delete apps when using one account for iphone 4s and ipod4, can delete from phone but not ipod

    How do we delete apps from ipod 4 when using same account as iphone 4s, we can delete from the phone but not the ipod, and when i get an app on my phone it automatically comes up on the ipod and visa versa, now ipod is full,

    Read the article from which the thread was posted, it clearly defines how to use multiple iDevices on a single computer.
    Sharing an Apple ID is not an issue.

  • How can I tell which apps are using data

    Perhaps this is a suggestion, just in case someone who is in a position to note this at Apple (not likely?) might read it.
    How about an app included in the OS that allows users to track which apps are transmitting and receiving data through cellular data and/or wireless.
    I keep getting charged by AT&T (it took restraint to not type a bunch of explatives before AT&T) for escessive data usage, even though I'm in wifi 90%+ of each day, and purposely restrict using it when not in wifi. Seriously, I don't now how I could use it less barring not using it at all, and I still get charged for data. I have no idea how to control this since I cannot tell which, if any, apps are transmitting data in the background, or if that's even possible.
    Seriously annoyed at getting charged extra when the 'service' they provide barely works for me the miniscule amount of times I try to use it.

    This is a user to user forum.
    You can leave feedback here
    www.apple.com/feedback/
    You could also try searching for an app that tracks data usage

  • Is there a screensnap app which uses date/time as the filename?

    I'm looking for a simple screensnap app which uses the current date/time as the filename... e.g. 010220120500 or something similar.

    Ah... automator... the ******* step-child of the OS.  Forgot about that one. I checked out your link and ran up against a barrier. I can make a sequential workflow, a date/time workflow in day/month/year and a couple other variations... but not a truly sequential day/date/year/hour/minute/second non-repeating workflow. Oddly enough I can make a hour/min/sec workflow but that would not absolutely define the file and could create duplicate filenames.
    I've looked over a lot of these screensnap apps and haven't found one that can do a non-repeating (thru system on/off sequences) filenaming thing. Maybe it can't be done.
    Automator was a good idea and it was fun using it again. Thanks Jeff.

  • How can i find out what app is using data at 5am

    i have used an unusual amount of data this month.  something on my phone is using data at 5am every morning.  its not me.  how can i find out what it is?

    The times reported for data usage on your bill do not necessarily reflect the time the data was actually used. The system gathers information from the cell sites and reports on a schedule.

  • Hi.iforgot to erase iphone 4s and removed it from my friends icloud account.now itunes says this account cannot be used to activate this iphone.i have his id and password,can log in to his icloud account but cant activate iphone.how to solve this problem?

    hi.i bought an iphone 4s from my friend.connected to itunes to restore it for a fresh install.after restoring to ios7 i realised that activation lock is enabled.i called my friend and get his id and pass.itunes said pass is wrong and cant activate the phone.then i logged in my friends icloud account (icloud.com said pass is ok) with same password and i removed the phone from 'find my iphone' list.but i forgot to erase the phone before removing it.now itunes says ''this apple id cannot be used to activate this iphone''.when i log in to icloud i cant see the phone in 'find my iphone' list so cant erase it now.can you please advise me step by step how to activate this phone?

    APPLE says:If the previous owner is not present
    Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps:
    Sign in to their iCloud account at www.icloud.com/find.
    Select the device from their Find My iPhone device list by clicking All Devices at the top of the screen.
    Erase the device by clicking the Erase button. This will erase all content and settings from the device. When prompted, do not enter a phone number or message. Click Next until the device is erased.
    When the erase is complete, click "Remove from Account" to remove the device from the account.
    After the device has been erased and removed from the account, you can proceed with the device setup process.
    i forgot to erase the phone.i just removed it without erasing.

  • IPhone 5 as GPS unit - disable cell service?

    I want to use my iPhone 5 as a GPS unit when I'm out in the mountains and I don't want my phone to keep searching for service and running down the battery. Is there a way to turn off everything (including phone service, not just data) except the GPS? I'd like something like airplane mode but still be able to use GPS. Thank you!

    No, the iPhone uses the cell signal to accelerate determining your position. Once the phone can connect with 3 satellites it will be able to determine your location...but...you will need to buy a mapping program that stores its maps on your iPhone instead of accessing them through cell data or WiFi. Like Garmin, or TomTom, or...more in the App Store.

  • Is there a way to tell which apps are using data while on WIFI?

    Hello,
    I have just purchased an iPad Air 2.  I use my phone as a mobile WIFI hot spot to connect to the internet when I do not have a regular WIFI connection available.  151 MBs of data were consumed over an hour and a half or so.  I played about an hour of Hearthstone, but I know from tethering my phone to my laptop that it usually doesn't use anywhere near that amount of data.
    I would like to track down which applications might be using the data so that I can avoid using them while connected to my phone.  Is there any way to do this?

    Thanks for the quick response.  That's a little disappointing though.  Is there an app on the store?

  • How do I change to using data on my iPhone if it's been set up to only make phone calls?

    My phone has been setup to only make calls as work have already given me an iPad. I'm wondering if it's possible to allow it to connect to our home broadband so I can use my iTunes?

    No.... It's not grey and is connected so I've managed to download from my iTunes account. Thanks for the help. Do I need to be connected to the Internet to get iTunes to work in the car? Probably really stupid question but I'm new to this!!! I can get them working from my iPad but it has a data link.

  • I had to get a new computer and when I plug in my iPhones it does not have all the apps I bought.  I get the error: are you sure you want to sync apps? All existing apps and their data on the iPhone will be replaced with apps from this iTunes library.

    How do I get an old library onto a new computer.  When I plug in phone all my apps do not show up.

    You need to copy the iTunes liubrary from your Old computer, or its Backup, to your New computer...
    See Here for one way
    iTunes: How to move your music to a new computer
    Or...
    From your Old Computer... Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Backup iTunes to an External Drive
    http://support.apple.com/kb/HT1751
    An Added Bonus is that you will then have a Backup of iTunes...

  • Synced new 4G with backed up data from previous iPhone, now have 3G.  Any clue??

    Lost 3G phone, purchased new 4G, synced up with laptop - have data now and a 3G phone.  Any clues?

    http://www.apple.com/iphone/specs.html
    GSM model: UMTS/HSDPA/HSUPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
    CDMA model: CDMA EV-DO Rev. A (800, 1900 MHz)

  • Where can I find out which iphone apps use data?

    Hi
    My iphone has wi-fi 24/7, yet my data usage is over the limit. 
    Where can I find a listing of which iphone apps use data and not wi-fi? 
    Your help will be greatly appreciated.

    If your phone is on wifi, then almost all apps will use it.  The exceptions are those from your provider.  For example, AT&T apps will always use their network.  To determine if an app is using data, you need to install DataMan Pro.  Even then, you will only get general info and on an hourly basis. Use the process of elimination to figure it out.

  • What things use up data on the iPhone 4? Also, what things take up space? Is it just like the iPod touch as far as space goes?

    I'm getting an iPhone and I want to know what I am looking for in data usage and space? Let me know?
    Thanks

    Anything that uses a network connection will use data, unless a wifi network is available to use (wifi does not count against your cellular 3G data use).  So email, web surfing, streaming video, updating content in news reader apps - anything like that.  Location based services as well, although there are GPS navigation apps that store their maps on the device, so do not need a data connection like the built in maps app (which uses data to fetch the map display data).  TomTom, Garmin and others have apps that include the maps stored on the device, and some, like MotionGPS allow you to cache maps for use later without a data connection.
    Pics, video's and music can also all be managed by only syncing what you want for the time being.  As long as you don't mind manipulating the sync settings and sync'ing more frequently, then you can still have a big music or photo library, just not all on the iPhone at one time.  Same goes for eBooks - as long as you don't want to keep a huge library on the device, just sync, read and remove when finished and put the next one on there (and eBooks take up very little space anyway - very compact format for ePub books).
    It sounds like 16Gb would be alright for you, but just remember you cannot upgrade the memory later.
    Also be aware of data settings.  If you use push email, it will use wifi if available when the phone is awake/active, but in sleep mode it will continue to work, but will use cellular data (since wifi is disabled when the phone enters sleep mode).  Manual fetch for email is a better way to control email data use.
    If you get unlimited social networking data use, that sounds nice (not an option with any plan I know of in the USA) - just be sure they explain it clearly (i.e. is it tied to a particular app. or only via web connections to sites - in other words how do you use it to ensure it falls into the unlimited bucket and not crosses over into your limited general data bucket).
    Enjoy!

Maybe you are looking for

  • IMovie Theater video length limit

    Why does iMovie Theater limits you to a 15 minute max video length? Most of my home movies are around 20 to thirty minutes. Seems silly to limit the video to such a short length if you are paying for the iCloud storage for your video.

  • [SOLVED] Configure dual head with different resolutions xf86-video-ati

    I have 1680x1050 and 1280x1024 monitors which I would like to setup so that I have two displays (:0.0 and :0.1), i.e. can't drag a window to the other display, but can move the mouse from one screen to the next. The graphics card is Radeon HD 4850. A

  • RSHTTPPIN - Capture connection test output

    Hi Folks,       My requirement is to Capture the connection test output of "HTTP Connections to External Server" in SM59. From the below screenshot I have to pass the "Detail" and "Value" information to my internal table. I tried with the SUBMIT RSHT

  • Import jsp

    How to import a jsp present in a different package into another jsp?

  • USMT to User State Server (PXE) sccm 2012 r2

    I apologize if this has been asked before, but I have spent quite a bit of time searching and not really finding any good material or if it was even possible.  Our information security officer wants us to scrub all of our assets during the reimage pr