APP RUN EXECUTION ERROR - F110.

Dear Sap Experts,
My User executed program on Run Date: 13/02/2012 and Next Run Date: 14/02/2012. Once he edit proposal done he got this error. My vendor is having open items but not yet cleared when i check job in sm37 status is showing Finished. How can i reschedule this program, At this stage APP Run Deletion is not possible. How can i complete this program through Run or Jobs.
While Executing the APP the following error is as follows. IF this is possible with job pls tell me how to proceed further in production.
Please advise me.
Parameters have been entered
Payment proposal could not be carried out
Payment run has been scheduled 02/12/12 13:53:17
Job was not released
Pls help me in this regard.
Thanks
Hussain
Edited by: Csaba Szommer on Feb 12, 2012 4:34 PM

Hi,
Payment procedures are derived for the company code from setting in Bank determination in T Code FBZP. Here you need to configure for concerned company code, in your case WIPR for USD currency:
Ranking order( Mention for the payment method which you are using in the payment run).
Concerned Bank Accounts.
Available Amounts.
Try and do come back if u face any problem
Regards,
Rohit

Similar Messages

While app run with foregin vendor

hai gurus,
in app running T code F110 payment to foreign vendors in edit propsal showing error *error in creating payment document , read job log*

Hi,
Check if there already a proposal created with same Parameters, Delete tht earlier Proposal and rerun the New Proposal .
Thanks
Goutam

Error running Execution plan for 'Project Analytics in PeopleSoft 9.0 '

Hi ,
I am running execution plan for Projects Peoplesoft 9.0 (BI Apps version 7.9.6)
The issue is the file type data source went thru the database (data warehouse)
the tasks that were completed SUCCESS were from the File source only from (SrcFiles).
error as below.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_PSFT_90_Adaptor:SDE_PSFT_ExchangeRateDimension_Full:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_PSFT_ExchangeRateDimension_Full
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
one more info,if this helps
values defined in the Parameters of the execution plan.
1     DATASOURCE     ,DBConnection_OLAP     is 'DataWarehouse'
1 DATASOURCE     ,DBConnection_OLTP     is 'PSFT_9_0_FINSCM'
1     DATASOURCE     ,FlatFileConnection     is 'PSFT_9_0_FlatFile'
The 'Relational Connection' In Informatica Repository Manager is currently pointing to only 'PSFT_9_0_FINSCM'
& 'DataWarehouse'
Please let me know what is wrong?
Regards,
JK

Hi ,
I created the PSFT connection in 'Applicaiton connection' of Repository manager.
Also the Informatica server's tnsnames.ora should have entry for the source( PSFT database) and that of the datawarehouse.
thanks,
JK

Picking up invoices during APP run in F110

Hi everyone,
Could anyone help me out in clarifying. During APP execution in F110, some of the invoices in the proposal list are showing exception for payment i.e, in red. when i checked those invoices are blocked with payment block B. So in order to pay those invoices i used FB02 & removed the payment block in the respective documents. How can i identify whether these invoices are automatically blocked by the program during APP run.
Thanks & Regards,
Ram,

Hi Ram,
payment block comes different ways.
1. automatic payment block which comes from MM when invoice i.e MIRO get trigger.
2. from payment terms.
3. manuall block.
if it comes from MM to remove use t-code MRBR other than this you can remove manually in F110 or at line itme level.
Regards,
Raman

APP RUN Error -Foriegn Currency

HI Guru's,
Iam trying post APP run for Foriegn currency showint following error..
Job started
Step 001 started (program SAPF110S, variant &0000000004436, user ID RJRAO)
Log for proposal run for payment on 21.08.2008, identification T4
>
> Additional log for vendor 302289 company code G1SG
>
> -
Payment method selection additional log
> Payment method selection for items due now to the amount of USD       25,000.00-
> Payment method "B" is being checked
> Bank details are being checked
>    Customer/vendor bank details are being read
> Country SG / Bank number 7375048 / Account 3043051758 ...
>     Customer/vendor bank details are being checked
>   System reads house banks and checks if they are allowed
>   House bank is selected ...
> No suitable bank can be selected for comp.code G1SG pmnt meth. B curr. USD
> Payment method "C" is being checked
> Payment amount is not within the limits allowed ( 0.00 - 19,999.99 )
> Payment method "I" is being checked
> Bank details are being checked
>   System reads house banks and checks if they are allowed
>   House bank is selected ...
> No suitable bank can be selected for comp.code G1SG pmnt meth. I curr. USD
> No permitted payment method exists
Information re. vendor 302289 / paying company code G1SG ...
... payment not possible because of reported error
End of log
Job finished
regards
Dhana

Hi Janardhan...
Sorry if this is not the correct place to put my question... Can you please provide any documents or any links for setting up the Workflow approval process for parked documents as you have already done that ...
Please kindly help me...will be really thankful

F110 ABAP Run time Error

Hi Friends,
My user has run F110 payment program
payment proposal and payment run also created. open vendor invoices also cleared with cleared doucments. But Run Time ABAP Error occured. the job was cancelled.
the bank payments are not happend. below description is the Error analysis.
Runtime Errors         CONVT_NO_NUMBER
Date and Time          17.02.2009 09:27:31
Short text
     Unable to interpret "CSE " as a number.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLFPAYM_NO" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     This exception cannot be caught in the context of the current statement.
The reason for the exception is:
The program attempted to interpret the value "CSE " as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
How to correct the error
    Whole numbers are represented in ABAP as a sequence of numbers, poss
     with an algebraic sign.
    The following are the possibilities for the representation of floati
    point numbers:
      [algebraic sign][mantissa]E[algebraic sign][exponent]
      [algebraic sign][whole number part].[fraction part]
    For example, -12E+34, +12E-34, 12E34, 12.34
    If the error occurred in your own ABAP program or in an SAP
    program you modified, try to remove the error.
    If the error occures in a non-modified SAP program, you may be able
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the followi
    keywords:
    "CONVT_NO_NUMBER" " "
    "SAPLFPAYM_NO" or "LFPAYM_NOU01"
    "FI_PAYMEDIUM_DMEE_PAYMULNO_05"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
please give me some inputs, should I suggest to user to reset the clear invoices and run again the
F110.
Points will be awarded.

hi
ru using any kind of BAPi here
check following
/message/3794598#3794598 [original link is broken]
Re: Sdccn Runtime error CONVT_NO_NUMBER
plz do the analysis in ST22 with ur ABAper
regards
KI

F110, APP run, payment advice, Very Urgent

Hi,
All
I have an very urgent problem which needed to be solved immidiatly, I need to prepare a payment advice form as per the requirement of the client, The problem is, I unble to test the developed form at APP run, I want know where or How I can see the preview or print of the payment advice so that I can test it and send to client immidiatly, client is asking as very urgent, as the project is already on LIVE,
Kindly help to this, and very thankful to all
Thanks & REgards,
Zeenathunnisa

HI,
I have configured the payment advice and assigned the variant to run upon the payment program to print the payment advice. but the log of the payment shows me the "payment medium created in the format"
Abap/4 processor error: "Call_function_parm_missing"
I think am missing some configuration. Can any body provide me how to check the configuratio and what is the necessary configuration to be done for payment advice print and we are not using the check print option.
"Requirement is when the payment run is done it should print the payment advice also"
Earleir reply is greatly appreciated and awarded.
Is it possibel to print payment advice for manual payment also.
Best Regards
Rajesh

Break execution after custom run-time error handler callback

I am using Teststand 2010 SP1 and have written a custom runtime error handler based on the ErrorHandlerExample example that ships with TestStand. It has been implemented as a StationPostStepRuntimeError callback in my Station Callbacks folder. I have modified the example as follows:
(1) Added code to turn off the UUT transmitter if it was on.
(2) Added a call to an executable that sends an email to the currently logged in user.
(3) Calls the standard TestStand run-time error dialog using the Engine DisplayRunTimeErrorDialog method.
(4) Processes the user's selection, then turns on the UUT transmitter for any option other then Abort.
The callback also checks the status of the Break and "Don't Show again for this execution" options selected by the user. If the user selects Break then the only option I can find is to call the API Execution.Break() method which breaks the execution right there in my callback. The user then has to single step there way out of the callback. Is there a way of instructing TestStand to complete the callback execution and break immediately after completing the callback (i.e.at the step following the error)? I've zipped up and attached my modified sequence.
Alternatively, is there a better way of doing this?
Regards,
David
Solved!
Go to Solution.
Attachments:
StationCallbacks.7z ‏13 KB

Didn't have a chance to try it yet but maybe StepOut is your solution?
From the TS Help:
StepOut Method
Syntax
Execution.StepOut
Purpose
Resumes the execution from a suspended state and then suspends the execution again after execution of the current sequence completes.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Run time error in FMBB after execution of RGZZGLUX GETWA_NOT_ASSIGNED FM

Hello Experts,
We have activated funds management in Development it is working fine without any issues. Transported same changes to Quality system and executed Program RGZZGLUX.
Issue: Run time error in FMBB transaction code even after execution of program RGZZGLUX. similar error in funds center group also.
Category               ABAP Programming Error
Runtime Errors         GETWA_NOT_ASSIGNED
ABAP Program           SAPLFMBD_DATABASE_ACCESS
Application Component PSM-FM-BCS-BU
Date and Time          10.06.2014 13:28:36
Short text
    Field symbol has not yet been assigned.
Requirement: Please let us know how to solve this issue
we have checked note:0000939958 - and changed Inactive status for tables FMIT, FMIP and FMIA, but no use, when we run program RGZZGLUX, it has deactivated this tables again.
Regards,
Chalapathi

Hello Shyam / Javed,
Thank you for your inputs.
I have solved issue, now it is working fine.
Activated EA-PS and included into transport request. executed program RGZZGLUX.
Note used to solve issue :0000908007
Regards,
Chalapathi

Run-time error "5010": Labview: VI execution ...

I get Run-time error "5010": Labview: VI execution terminated by server. This error occurs sporatically. I am running Visual Basic 5.0 application that communicates to Labview 6.1 VIs. It is using NI-Imaq to do vision analysis of parts. I just need to know what to look for that may be causing this error. I am also running it on a PXI system with 64 MB of memory.

Hello,
I recommend you to do direct function calls to NI-IMAQ and NI Vision function libraries from Visual Basic as this will be a lot more efficient and improve rubustness of your application. During the installation of both software, you have the option to include support files for Visal Basic. Once these components are installed you should see the shipping examples in the following directories (if installed in the default path):
(NI-IMAQ) C:\Program Files\National Instruments\NI-IMAQ\Sample\VB
(NI Vision) C:\Program Files\National Instruments\MeasurementStudio\VB\Samples\IMAQ
There are additional examples that can be found in the Code Library (see the link on the left sidebar).
Let me know if you have further questions regarding this issue.
Regards,
Yusuf C.
Applications Engineering
National Instruments

Run time error during transcation execution in ECC 6.0

Dear All,
Working on ECC 6.0; Activated the Business Function, and any transaction that is run, we face the Run time error as follows:
Category : Internal Kernal Error
Runtime Errors : DDIC_TYPE_INCONSISTENCY

from OSS Note 1049251 - Activate Enterprise Extensions in the switch framework
2. Prerequisite for activation
Unable to deactivate
Before you activate Enterprise Extensions, note it is not possible to deactivate these extensions. Furthermore, not every Enterprise Extension is compatible with every Industry Extension. If you have activated an industry solution (known as a "Business Function Set") in your system, refer to the notes on how to activate the industry to find out if there are any restrictions regarding specific Enterprise Extensions.

7009: Test Execution Error with tutorial examples

Hi,
I tried to run the tutorial files found on EclipseCon 2014 site (the "classic" dvd app test).
Following first steps, after running AUT when I run test cases I always get this error:
7009: Test Execution Error.
Referenced Testcase could not be found.
What does it mean? Is it a configuration problem?
I am on windows 7 64bit and Jubula 8.1 (the latest version).
The same happens when I try to run other pre-installed example projects.
Thanks for reply
Regards
Matteo

Hi,
okay, from a first quick look at your Test Case I can tell that the unbound modules concrete 8.0 library is missing in your database used by Jubula. This library is reused in the JubulaTutorial Project but since is does not exist in the database the JubulaTutorial Project is displayed "broken". But don´t worry, this is very easy to fix
1. Open the Properties for the JubulaTutorial Project
2. Select node "Used Projects"
3. On the left hand side you can see which libraries exist in you DB, on the right hand side you can which projects are reused in the currently opened Project
4. Select the unbound modules concrete 8.1 from the left side and select the unbound modules concrete 8.0 from the right side
5. Then click the single arrow which points to the right side
6. Confirm
7. Fixed

PLEASE HELP! Server execution error

Good day everybody.
Long story short, I had afew adwares in my pc and i did many things to remove them. I ended up with installservices64 error when starting up and sever execution error when RIGHT CLICK screen resolution or personalize. I also cant open PC settings from start
menu (windows 8). I have many important data on my pc and would only like to fix this issue. i ve read other threads and seem like an registry error. UNLIKE other people, i have no issue with WMP or running apps. PLEASE HELP!

Hi Zarni,
Thank you for posting this issue on the TechNet community forums.
From the description I understand that you recently removed certain adware from your computer but are now facing an installservices64 error when starting up. This could be caused by the key Windows installer service, InstallServices64.msi file no longer
being present on your computer.
You could try using the Microsoft Fix-it tool: http://support.microsoft.com/mats/program_install_and_uninstall/en-us

Foreign currency invoice Through APP Run Payment

Hi SAP Guru's,
My company code currency is "SEK" , and i am posting in FB60 currency is USD then i was Run app It is Showing like this Error
Job started
Step 001 started (program SAPF110S, variant &0000000021747, user ID BREDDY)
Log for proposal run for payment on 02/09/2012, identification B1
Information re. vendor 65670 / customer / paying company code 3130 ...
Payment with currency USD, payment method : No valid payment procedure
Information re. vendor 65670 / paying company code 3130 ...
... payment not possible because of reported error
End of log
Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000008301, user ID BREDDY)
Step 003 started (program RFFOEDI1, variant &0000000000283, user ID BREDDY)
Program RFFOEDI1: No records selected
can any one suggest me if any configuration is needed and how to run "Foreign currency invoice Through APP Run Payment"
Thanks in Advance,
Bhaskar Reddy.S

Hi Vishnu,
Thanks for your quick replay,it is also very useful answer to me. and i got the solution finally.
Setps:-
1) FS00 Under Control Data Tab I Remove the only Balance in Local Currency Check box
2)FBZP >BANK DETERMINATION> RANKING ORDER (Select ur company code), We need to maintain The which currency you want to like you have payment method "C" You should maintain
Payment Method       Currency     Ranking.Order          House Bank
C                                SEK                 1                            1000
C                                USD                 2                            1000
C                                  GBP                3                             1000
Under Bank Accounts Folder
House Bank           Payment Method         Currency      Account ID     Bank Sub account
1000                             I                               SEK             SEK1               200101
1000                             I                               USD             SEK1               200101
1000                             I                               GBP             SEK1               200101
Under Available Amounts Folder
House Bank          Account ID      Days    Currency    Available for outgoing Payment
1000                       SEK1                0           SEK           9,999,999,999,99
1000                       SEK1                0           USD           9,999,999,999,99
1000                       SEK1                0           GBP           9,999,999,999,99
Thanks,
Bhaskar Reddy.S

Interface Mapping run time error...java.lang.nullpointerException thrown

Hi,
I am trying to create a simple f2f scenairo and when I tested the configuration xi throws this message as :
Interface Mapping run time error...java.lang.nullpointerException thrown during application mapping.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:TimeSent>2007-01-09T03:43:49Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>CAMEL_BS_01</SAP:Service>
<SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>Camel_BService_01</SAP:Service>
<SAP:Interface namespace="http://kia.com/fiel2file">Target01_MI</SAP:Interface>
- <SAP:Mapping notRequired="M">
<SAP:ObjectId>j5qiPBwVPU2yonkPwhdt/g==</SAP:ObjectId>
<SAP:SWCV>tR26oJ7nEdu5oM/vCXwv+g==</SAP:SWCV>
<SAP:SP>-1</SAP:SP>
</SAP:Mapping>
</SAP:Receiver>
<SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_Equipment_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_Equipment_MM_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-01-09T03:43:49Z" wasRead="false">
<SAP:Engine type="AE">af.pi7.gbdci550</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2007-01-09T03:43:50Z" wasRead="false">
<SAP:Engine type="IS">is.03.gbdci550</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20070108</SAP:Date>
<SAP:Time>224350</SAP:Time>
<SAP:Host>gbdci550</SAP:Host>
<SAP:SystemId>PI7</SAP:SystemId>
<SAP:SystemNr>03</SAP:SystemNr>
<SAP:OS>AIX</SAP:OS>
<SAP:DB>DB6</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>014</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PIAFUSER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>002</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
<SAP:PipelineService>PLSRV_MAPPING_REQUEST</SAP:PipelineService>
<SAP:QIdInternal>XBTOW0__0001</SAP:QIdInternal>
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID">097C2FFA403445A30F7600CE</SAP:EOReferenceRuntime>
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>168</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2608</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>168</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>AENGINE</SAP:AdapterInbound>
<SAP:InterfaceAction>DEL</SAP:InterfaceAction>
<SAP:RandomNumber>67</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Sender_Agreement_GUID>49574D50A74F3F5D902E20831759594C</SAP:Sender_Agreement_GUID>
<SAP:Serialize_Children>X</SAP:Serialize_Children>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.025474</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.064329</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.067038</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.085552</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.085573</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.472198</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.473649</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.483159</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.483341</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.48668</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.486921</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.49182</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.491835</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.720028</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.721545</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 9E0AD3009F9311DB8770000D60514DD2</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOW0__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
- 
<Trace level="1" type="T">Interface Mapping http://kia.com/fiel2file Equipment_IM_Outbound</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_Equipment_MM_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
- <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <SAP:Payload xlink:href="cid:[email protected]">
<SAP:Name>MainDocument</SAP:Name>
<SAP:Description />
<SAP:Type>Application</SAP:Type>
</SAP:Payload>
</SAP:Manifest>
</SOAP:Body>
</SOAP:Envelope>
Please I request to give me some hint how to troubleshoot this issue.
Thanks a lot,
Srujan

Hi, i have the same type of error when testing configuration, but it seems that the mapping even doesn't start :
i'm creating an EBP to XCBL scenario, so it's a RFC->XI->XCBL 3.5
Here is the Java exception
Mappage d'interface
Can someone be helpful for that ?
Regards
Laurent
Message was edited by:
Laurent Gitton

APP RUN EXECUTION ERROR - F110.

Similar Messages

Maybe you are looking for