App says "Evaluation Copy" but ActiveX controls are not evaluation copies.

App has been running for 3+ years in a Win95 machine. Just moved to Win98 machine and now "Evaluation Copy" appears in app. I have copied the two OCX files from the Win95 machine and registered them on the new machine. I purchased ComponentWorks 3 years ago - I never had evaluation copies of these OCX files. Could this be a Win95 to Win98 problem?

I doubt that this is a Windows problem; there are several reasons why an ActiveX control could turn to evaluation mode (see KB link below). I would suggest that you uninstall the OCX controls from your new computer and instead run the ComponentWorks installer for proper installation/registration.
If you have version 3.x or later of the CW controls, you could also run the Measurement Studio License Fixer Utility found in the following Knowledgebase article:
http://digital.ni.com/public.nsf/websearch/86256A47004E16D186256A99007BEFB7?OpenDocument
This utility will help you diagnose the license state of your controls and will try to fix any broken licenses. Please read the KB carefully as it may not apply to your particular setup.
If none of the solutions off
ered here works for you, please email us through http://www.ni.com/ask so we can assist you in a more direct way.
Regards,
Azucena Perez
National Instruments

Similar Messages

I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?

I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?

I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

My friend has lost his iPhone 5.on find my iPhone when entered id and password app says id is valid but not activated. What should I do to find that lost iPhone

My friend has lost his iPhone 5.on find my iPhone when entered id and password app says id is valid but not activated. What should I do to find that lost iPhone

If Find My Phone has not been activated on the iPhone before being lost there is nothing more that you can do to locate it with iCloud. The only option is physical search for it.
If you have an idea of the location, call the iPhone and see if you can hear it ring.

APP says file is Updated, but it is not installed on computer (was deleted because it word not run).

APP says file is Updated, but it is not installed on the computer (was deleted because it word not run). Now I cannot update or download!

CC desktop lists applications as "Up to Date" when they are not
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

One or more activex controls could not be displayed because either

Hi.
I don't know if this is the right forum for my problem.
Anyway,
I have a problem with my Windows Services.
Each time when I launch Windows Services window, I get a warning:
One or more activex controls could not be displayed because either:
1. your current security settings prohibit running activex
controls on this page, or
2. you have blocked a publisher of one of the controls.
as a result, the page may not display correctly.
The warning pop-up opens only when I click on Extended tab.
The problem has nothing to do with IE security, because I can open pages with ActiveX controls on them and so.
I have installed Spybot spyware/malware removal tool. Then uninstalled it.
I'm not sure if this is the cause of the problem. But I presume it is.
So, may be someone was facing the same problem and knows the cause for it.
Thanks.

Unlike the rubbish that was stated before this post, this one works. This is the solution and Jishnu is brilliant. Thanks a million, friend.
Try to follow the KB article (KB907343).
1.
Click Start, click Run, type regedit, and then click OK.
2.
Expand the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0
3.
In the right pane, right-click 1200, and then click Modify.
4.
In the Value data box, type either 1 or 0 to overwrite the existing value of 3. Then, click OK.
Note If you type 1 in the Value data box, you will receive the following prompt when you start Microsoft Project:
Do you want to allow software such as ActiveX controls and plug-ins to run?Additionally, you will receive this prompt at other times when you use Microsoft
Project. If you do not want to receive this prompt, type 0 in the Value data box.
The values 0, 1, and 3 are associated with the following behavior:
0 = Enabled, or the action is permitted
1 = Prompt
3 = Disabled, or the action is not permitted
5.
Quit Registry Editor.
IF this does not works try to check the Internet Options..
Try to reset the Internet Explorer.
1. Click on
Start & run.
2. Type inetcpl.cpl & click
ok
3. Click on Advance Tab & click on
Reset (Make sure to put the check mark on the delete the personal setting for IE8) then again
reset.
4. Click
close.
This should work.

One or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.

hi All,
i have one of the requirement for an application, we do upload some release not in file server and that is used in application link to see the note. in this note i have converted the Excel into .HTM format(web page). this was working fine, but from last
two days all of a sudden we are recieving error as above.
one or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.
could anyone please help me on this.
Thanks and Regards,
krishnamurthy

Hi,
Actually Arnavsharma provided a operable method for you. But no luck, it's not invalid.
Here I also offer you an method you can try.Please delete the extra (parasite) zone from the Zones subkey :
Click Start , click Run , type regedit , and then click OK
Expand the following registry subkey
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones
Delete the extra (parasite) zone from the Zones subkey
Note: The parasite zone is a pseudo-graphic number listed before zone number 0. The pseudo-graphic number looks like a miniature upper case "L"
Close the registry editor
Thanks!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

[BUG] deploytk.dll file and activex control is NOT uninstalled

deploytk.dll file and activex control is NOT uninstalled, when you uninstall the latest JRE.
I have uninstalled the latest JRE, but the file deploytk.dll is still present in c:\windows\system32\ and the related activex control deploytk.dll 6.0.190.4 is loaded in IE8. Please fix this bug.
Windows Vista SP2

Unfortunately, it was *all* of my ActiveX controls that wouldn't load. That said, A user of the Info-LabVIEW list came up with the answer: reinstall the RunTime engine - wierd....
thanks,
Christopher
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

ActiveX control is not working with windows NT

I've have a stand alone application which uses an activeX control. The application was compiled using Labview 7.1 on a Windows XP machine. The application will run without any problems on Windows XP and Windows 2000, however the activeX control will not work with Windows NT 4.0. The activeX control is registered, and I have also compiled the application on a Windows NT 4.0 machine. I do not receive any error messages, the application will start but will not communicate with the activeX control. Does anyone have any suggestions?

Hello,
Have you tired running the VI by itself (not exe) on the NT machine? Make sure you are doing adequate error checking in your code. It could be possible that the application is generating an error which in not handled appropriately. Also which service pack do you have installed on the NT machine? Please look at the release notes for LabVIEW 7.1 here.
Regards,
Chetan K
Application Engineer

I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1 ?

I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1 ?

See Here... Unable to Update or Restore...
http://support.apple.com/kb/HT1808

I have been using a free trial of photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.

I have been using a free trial of Photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.

Hi dmomoney24 ,
Kindly refer : CC desktop lists applications as "Up to Date" when not installed.
Please revert if the problem persists.
Thanks,
Atul Saini

HT4910 I can not back up my iPhone. it says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?

I can not back up my iPhone. It says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

HT204306 my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

You've connected the iPad via cable to your computer, and your computer's iTunes is up-to-date ? If it's icon isn't showing then try one of these troubleshooting pages :
PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Mac : If you don't see your connected device in iTunes for Mac - Apple Support
If the iPad is disabled then you'll need to reset the iPad back to factory defaults, after which you can restore to your backup

I want to buy music but i can't remember my security questions, It says to reset it but the link is not there to reset. It says to contact ap support but I've tried both ways to contact and it says it isn't working.

I want to buy music but i can't remember my security questions, It says to reset it but the link is not there to reset. It says to contact ap support but I've tried both ways to contact and it says it isn't working.

The reset link will only show if you have a rescue email address on your account (an alternate email address is different). If you don't have one (you won't be able to add one until you can answer your questions) then you will have to contact Support in your country to get the questions reset.
How are you trying to contact Support ? You should be able to do so via the following :
Contacting Apple about account security : Contact Apple for help with Apple ID account security
Or if your country isn't on that page then use this form : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset you can then add a rescue email address for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses
Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID

I have purchased songs from itunes on my ipad but now they are not there anymore. How can they get them back? Dont come up in songs not on this ipad and in itunes it asks to buy again

I have purchased songs from itunes on my ipad but now they are not there anymore. How can they get them back? Dont come up in songs not on this ipad and in itunes it asks to buy again

If you are now in the US then you can only use the US store, so you should update the address on your account
Changing country : Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account.
Had you copied the songs over to your computer's iTunes library, do they show in the Music section on it ? You can copy purchases that you still have on your iPad over to your computer's iTunes library via the File > Devices > Transfer Purchases menu option

HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.

HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.
THANKS

If you need to Transfer photos from iPod to PC,I have a method for your reference,I suggest you use iStonsoft iPod to Mac Transfer software to copy photos from iPod to Mac,a professional software,Not only can you quickly Copy pictures from iPod to Computer,but also can save a lot of trouble and time
[B]Follow these steps to Transfer photos from iPod to Mac[/B]
Step 1. Download and run the iStonsoft iPod to Mac Transfer software on your Mac computer
Step 2. Connect iPhone with Mac
Step 3. Hit "Photos" to scan photos from iPod to Mac
Step 4. Click "Photos" button to transfer photos from iPod to Mac
Step 5. Wait a while,you will success Transfer these photos from iPod to Mac
How to Transfer/Copy Photos/Pictures from iPod to Mac computer

App says "Evaluatio​n Copy" but ActiveX controls are not evaluation copies.

Similar Messages

Maybe you are looking for

App says "Evaluation Copy" but ActiveX controls are not evaluation copies.