App Server for Interactive Voice system

Hi everyone
Can i use Oracle Application Server for Interactive Voice Respond System(using the phone not wireless)?
Thanks in advance

If you have different RPs for each IVS, nothing to do about load balancing, you would need to have the same RP and have the 2 SIP trunks in the same RG/RL
For limiting the number of calls, you can use CAC.

Similar Messages

Office Web Apps server for Lync DNS question

We are going to deploy an Office Web Apps server for our Lync 2013 clients, available internally and externally. We do not have a split-horizon DNS so it is not possible for wac.foo.com to have a different IP for internal vs. external clients. What is the
best setup for our scenario? It looks like we can only add one address in the Lync topology builder, so would it make sense to send everybody to the external wac.foo.com regardless of whether they are internal vs. external? Or is there a better option?
Thanks,
Matt

It might be easiest to use pin-point DNS. Create an internal zone called wac.foo.com with a blank A record that points to the internal IP address of the OWAS/WAC server. This way, wac.foo.com will resolve to the correct
internal address, but you're not setting up a split zone for the rest of foo.com.
This trick can come in handy for publishing other items without recreating the entire zone, it's a nice one to keep in your back pocket.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Common content server for 2 SAP systems

Hello Friends,
We have configured a common content server for 2 SAP systems, say A & B using oac0 and csadmin, have set 2 content rep C1 for A & C2 for B resp. Please let me know if this is fine?
other thing is when i go to t-code csadmin on both the systems, for A - C2 displays customizing missing and for B - C1 displays customizing missing.but the systems are running fine and we are able to checkin documents
please let me know why it shows customizing missing?
Regards
Surjit

Hi,
The customizing missing message is due to 2 different SAP system. Means when you activate the content server thru CSADMIN the certificate is used only one. Right! Now physical systems are two so in both the cases it will show one as customizing missing because no physical rep available for missing one. But these will work at it's own level fine because the one is available as a physical rep in each case.
Hope this will resolve the query.
Regards,
Ravindra

How to run App server applications in Client systems

Hi all,
I m new to Oracle Devsuite 10g and App server. I configured the app server and i m able to run in my local machine (server) but i m not able to run in some others machines. even though i have given same path.
its displaying page cannot be dispalyed
My path is http://vagee/forms/frmservlet?config=TEST_APPS
please tell me how to run in client systems?
Regards,
Kalyan

hi
thanks for your reply. i found the problem. In server machine Firewall was in On Mode. So that it was not allow to access. then i have switched off the firewall. now its running well in client systems also.
thank you.

Error when booting app server for first time

Hi All,
My OS is OEL 6,PT 8.53 and HCM9.2 after creating the app server domain and booting it for first time i am getting an error as below,
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 221921 -D TESTSERV - S PSWATCHSRV :
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha ndler
exec tmshutdown -qy
Any help appreciated.
TUXEDO LOG Says,
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: client high water (0), total client (0)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162258.wipcoe1234!PSADMIN.5355: Begin attempt on domain HCMDM92
162302.wipcoe1234!tmadmin.5392.1509406464.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
162304.wipcoe1234!tmboot.5393.2297452288.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162306.wipcoe1234!BBL.5394.2180380416.0: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit, Patch Level (none)
162306.wipcoe1234!BBL.5394.2180380416.0: LIBTUX_CAT:262: INFO: Standard main starting
162308.wipcoe1234!tmboot.5397.3909768960.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162308.wipcoe1234!tmboot.5397.3909768960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
162311.wipcoe1234!BBL.5394.2180380416.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
162314.wipcoe1234!PSADMIN.5355: End boot attempt on domain HCMDM92
Edited by: ajith on May 3, 2013 5:39 PM

If not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas.

Integrating Dialog/App server into 4.7 system

We are on SAP R/3 4.7 using Oracle 9.2.0.6 and Solaris 8.
To test the performance of a Linux application server on our QA system, we installed Suse Linux 9 on a server and have performed the SAP installation as per the Installation Guide "SAP R/3 Enterprise on UNIX: Oracle - Using SAP R/3 Enterprise Core 4.70, SAP Enterprise Extension Set 2.00", following the Linux-specific instructions for Dialog servers.
The installation completed successfully, and 'startsap' brought the App server box up successfully.
However, the App server is not visible in SM51, and efforts to sign into it via the SAP GUI produce the error WSAECONNREFUSED - Error 10061. We have previously experienced the same issue with another App server on which we installed SQL Server.
I am not aware of any steps that were missed in the installation guide, and would like to know if there is a procedure that needs to be followed after installation to integrate the server into the existing system. During the SAPinst process, the server was identified as a Dialog Server, and the name of the Central/Database instance was specified, so I would have expected the system to recognize the new Dialog/Application server.
This is the first time I have installed an Application/Dialog server, and any information regarding what is missing would be very valuable.
Thanks,
Mervyn

hello Mervyn,
Please check in SAP MMC if the dialog instance(application server) is showing up or not. Further check if it is running. You should also try to restart the SAP server.
Regards.
Ruchit.

Office web apps Server for Sharepoint 2013

Hello,
I used the following article to install office web apps server and hook it up to a test sharepoint server:
http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx. The OWAS service was verified as working by loading:
https://owas.companyname.com/hosting/discovery
For the sharepoint configuration phase, the following commands were run on the sharepoint machine:
1) New-SPWOPIBinding -ServerName "owas.companyname.com" -- (owas.companyname.com) is the host name of the owas server)
2) Get-SPWOPIZone
3) Set-SPWOPIZone -zone "external-https"
However, office documents are still launching in the desktop office applications, not in the browser. Any ideas of what else I may need to do?
thanks,
Sherazad

Hi ,
According to your description, my understanding is that you fail to configure Office Web Apps for your SharePoint 2013.
How about run Get-SPWOPIZone? If you can get a result, it says that your SharePoint have connected with Office Web Apps.
Then you can run below command to change the zone to internal-https.
Set-SPWOPIZone -zone "internal-https"
Reference:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
http://stevegoodyear.wordpress.com/sharepoint-2013-build-guide/office-web-apps-2013-server-install-and-configuration/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Create attachment of a file stored on the app server for mail

Hello All:
I am working on sending a mail with attachemnts (file from the app server), i am aware of numerous solutions posted on the forum ....i am able to create an attachment and send mail. the problem i am facing is the attachment is corrupted . can some one guide me as what i am ding wrong . here's the code
DATA: REC(80) TYPE C.
    DATA: L_SIZE TYPE DRAO-ORLN.
    DATA: L_LINES TYPE I.
    DATA: L_DATA_TAB TYPE TABLE OF RCGREPFILE.
    DATA: L_DATA_TAB1 TYPE TABLE OF RCGREPFILE.
    DATA: L_DATA_WA TYPE RCGREPFILE.
    DATA: N_FILE TYPE RCGIEDIAL-IEFILE.
    P_FILE = '/usr/sap/MIE/SYS/global/PDFSpools/30978.pdf'.
    N_FILE = P_FILE.
    CONCATENATE 'C:temp' RQ2NAME '.pdf' INTO ELPATH.
*   Read Data from the App server
    OPEN DATASET P_FILE FOR INPUT IN BINARY MODE .
    DO.
      READ DATASET P_FILE INTO REC.
      IF SY-SUBRC NE 0.
        EXIT.
      ELSE.
        L_ANN = REC.
        APPEND L_ANN TO T_PDF .
      ENDIF.
    ENDDO.
    CLOSE DATASET P_FILE.
*   How do i get the filesize ?
    CLEAR L_ANN.
    DESCRIBE TABLE T_PDF LINES LIN_TEXT.
    LOOP AT T_PDF INTO L_ANN.
      APPEND L_ANN TO T_ANN.
    ENDLOOP.
*    Using this i get the file size
*    CALL FUNCTION 'C13Z_RAWDATA_READ'
*      EXPORTING
*        I_FILE           = N_FILE
*      IMPORTING
*        E_FILE_SIZE      = L_SIZE
*        E_LINES          = L_LINES
*      TABLES
*        E_RCGREPFILE_TAB = L_DATA_TAB
*      EXCEPTIONS
*        NO_PERMISSION    = 1
*        OPEN_FAILED      = 2
*        OTHERS           = 3.
*    CLEAR L_ANN.
*    DESCRIBE TABLE L_DATA_TAB LINES LIN_TEXT.
*    LOOP AT L_DATA_TAB INTO L_DATA_WA.
*      L_ANN-LINE = L_DATA_WA-ORBLK.
*      APPEND L_ANN TO T_ANN.
*    ENDLOOP.
    DOC_CHNG-OBJ_NAME   = 'URGENT'.
    DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
    DOC_CHNG-OBJ_DESCR = TEXTS.
    DOC_CHNG-SENSITIVTY = 'O'.
*   DOC_CHNG-DOC_SIZE   = LIN_TEXT * 255.
    CLEAR OBJPACK-TRANSF_BIN.
    OBJPACK-HEAD_START = 1.
    OBJPACK-HEAD_NUM   = 0.
    OBJPACK-BODY_START = 1.
*   OBJPACK-BODY_NUM   = LIN_TEXT.
    OBJPACK-DOC_TYPE   = 'RAW'.
    APPEND OBJPACK.
    NOMFITXER = ELPATH.
    CALL FUNCTION 'SPLIT_FILENAME'
      EXPORTING
        LONG_FILENAME = NOMFITXER
      IMPORTING
        PURE_EXTENSION = EXTENSIO.
    OBJPACK-TRANSF_BIN = 'X'.
    OBJPACK-HEAD_START = 1.
    OBJPACK-HEAD_NUM   = 1.
    OBJPACK-BODY_START = 1.
    OBJPACK-BODY_NUM   = LIN_TEXT.
    OBJPACK-DOC_TYPE   = EXTENSIO.
    OBJPACK-OBJ_NAME   = RQ2NAME.
    CONCATENATE RQ2NAME EXTENSIO
      INTO NOMFITXER SEPARATED BY '.'.
    OBJPACK-OBJ_DESCR = NOMFITXER.
    OBJPACK-DOC_SIZE = L_SIZE * 255.
    APPEND OBJPACK.
    CALL FUNCTION 'BAPI_USER_GET_DETAIL'
      EXPORTING
        USERNAME = SY-UNAME
      TABLES
        RETURN   = BAPIRETUR
        ADDSMTP = DADESUSER.
    READ TABLE BAPIRETUR WITH KEY TYPE = 'E'.
    IF SY-SUBRC NE 4.
    ELSE.
      READ TABLE DADESUSER INDEX 1.
*     REMITENT = DADESUSER-E_MAIL.
      REMITENT = SY-UNAME.
    ENDIF.
    TEXTS = 'TEST MAIL'.
    APPEND TEXTS.
    DESTINATARIS-RECEIVER   = SY-UNAME.
    DESTINATARIS-REC_TYPE   = 'B'.
    DESTINATARIS-EXPRESS    = 'X'.
*   DESTINATARIS-COM_TYPE   = 'INT'.
*   DESTINATARIS-NOTIF_DEL = 'X'.
*   DESTINATARIS-NOTIF_NDEL = 'X'.
    APPEND DESTINATARIS.
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
         DOCUMENT_DATA                    = DOC_CHNG
         PUT_IN_OUTBOX                    = 'X'
         SENDER_ADDRESS                   = REMITENT
*        SENDER_ADDRESS_TYPE              = 'SMTP'
         COMMIT_WORK                      = ' '
       IMPORTING
         SENT_TO_ALL                      = ENVIAT
*        NEW_OBJECT_ID                    =
*        SENDER_ID                        =
       TABLES
         PACKING_LIST                     = OBJPACK
*        OBJECT_HEADER                    =
         CONTENTS_BIN                     = T_ANN
         CONTENTS_TXT                     = TEXTS
*        CONTENTS_HEX                     =
*        OBJECT_PARA                      =
*        OBJECT_PARB                      =
        RECEIVERS                        = DESTINATARIS
      EXCEPTIONS
        TOO_MANY_RECEIVERS               = 1
        DOCUMENT_NOT_SENT                = 2
        DOCUMENT_TYPE_NOT_EXIST          = 3
        OPERATION_NO_AUTHORIZATION       = 4
        PARAMETER_ERROR                  = 5
        X_ERROR                          = 6
        ENQUEUE_ERROR                    = 7
        OTHERS                           = 8.
Message was edited by: Poornanand Mandalika. Code was formatted using the <b>Code</b> button!!

Assuming you are using Apache?
You could place your Word docs in the same folder as your current Apex images directory (or a sub-directory off it) then reference them with a URL of the form http://yourserver/i/sample_word_file.doc. Alternatively you could add a new Alias entry to your dads.conf file (found in your Apache/modplsql/conf directory) to expose the folder on your webserver that contains your Word files via a URL such as http://yourserver/word_docs/
E.g.
Alias /word_docs/ "c:\my_docs\technical_word_docs/"
Andy

SQL Server 2008 on the Web/App server for BPC 7.0

In a multi-server environment (DB/OLAP on a 64-bit platform, Web/App on a 32-bit platform), is it necessary to have SQL Server on the Web/App server if Reporting Services is not used? Could you explain why SQL Server is needed on this server if Reporting Services is not used?

Hi
Reporting Service is a requirement for BPC. If it is not deployed on App Server, it can be deployed elsewhere but is required.
Other SQL related things that go on App Server include:
Reporting Services
Shared Features
       Client Tools Connectivity
       Management Tools - Complete
       Business Intelligence Development Studio
       Integration Services
       Client Tools Backward Compatibility
Microsoft SQL Server 2005 Backward Compatibility Components from Microsoft SQL Server 2008 Feature Pack
Reporting Services/Integration Service requires SQL license(s). Standard ediiton of these can be used if you are not performing Load Balanced deployement.
Regards
Shaam

Kerbeos & Cyptolib in same app server for GUI-BW & BO -BW SSO

Hi
We have situation wherein we have SSO to BW from SAPGUI (logonpad) using windows AD userid. SNC authentication for this by Kerbeos.
Now for our BO webireports we would like have to scheduling functionality & rowlevel secutiry from underlying BW reports. Hence we need to have SSO between BW & BO ( using windows AD userid)
But SNC authentication for BO-BW SSO uses cryptolib.
Since we can not have both kerbeos & cryptolib in the same app server, is there any alternative solution other than using 3rd party tool like secude?
Is this issue addressed in BI4?
Your help is greatly appreciated.
Thanks
Paddy

Thanks Ingo for the response.
Can you please elobarate when you say "u201D You should check if the SNC libraries that you are using for the client side SNC also allows for server side trust.u201D
Also is this issue addressed in BI4 release?
Thanks

Where can I download the pure java edition app server for windows

Where can I download a copy of the uncertified windows version of the app server listed below?
OracleAS Java Edition v9.0.4
Oracle HTTP Server
OracleAS Containers for J2EE
Oracle Enterprise Manager
OracleAS TopLink
Oracle JDeveloper
Currently certified: Solaris, HP, Linux
(I am not interested in the 10.0.3 preview version of the app server)
I went to the Production release download area for the Application Server and they only let you download the Certified version of this SW which is for Linux, HP, and Linux.
I went to the Pre-release download area and they only have the 10.0.3 preview versions listed for download.
We want to install the above-mentioned version of an intel box running Windows for our integration point and we have linux boxes setup for production. We would like to use the same version of the app servers on all 3.
Any ideas out there?

Go into
Applications / Utilities / Java Preferences.app
and make sure you have the 'Enabled' boxes checked for both 64 and 32-bit.
Finally, in
Safari > Preferences | Security
make sure the 'Enable Java' box is checked.
Message was edited by: softwater

App Server for deploying JDev Apps

Hello,
I am trying to find out the app server of
choice for the apps we develop using
JDeveloper. I am not quite sure that OAS
is going to cut it for EJB/Servlet/..
apps when compared to websphere/weblogic/
iplanet etc. Can I please get the feedback
of this forum ?
thanks
sanjay
null

How Do I Deploy Enterprise JavaBeans to IBM WebSphere?
http://www.oracle.com/technology/products/jdev/howtos/appservers/deploy_to_websphere.html

I have a macbook and I just upgraded to Lion upgraded my iTunes software also setup a gmail acct in addition to my aol acct...just checked diagnostics and the connection doctor says I'm connected with server for both mail systems, but I'm not getting mail

I have a macbook and I just upgraded to Lion, downloaded the new software for Itunes and added a gmail account in addition to my existing aol account. Altho both mail systems are visible in my mail account I'm no longer receiving emails from either account. I checked the mail doctor and both accounts are connected to the server, but I can't figure out why I'm not receiving emails any longer. I'm trying to clean-up my stuff before I add my new Iphone, but I must admit all of this is rather daunting. Also does anyone know when tech support is available? it must be PST cause no one is there at 8AM EST!

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

There is 1 or 2 msg server for ABAP+Java system?

Hi, all:
I am confused by the number of msg server processes in ABAP+Java system.
We are running on Windows/Oracle platform.
There are 2 msg_server.exe at OS level. So it looks one of them belongs to the central instance and one of them belong to the central service of the Java stack. Am I correct? I've heard that even for an ABAP+java system, there is only one msg server. Which one is correct? Please share your opinion, thanks.

Hi,
There will be 2 MSG servers running in ABAP + JAVA system..
1 for SCS and other for Central Instance.
ENJOY SAP

Change the Releated Integration Server for all Business Systems

Hello,
follow Scenario:
We export the SLD entries from a Development System in a file.
Now we want to import the Entries in our Prod.-System, and we
have to assign (or change) to other Related Integration Server.
e.g. the esported Business System has in Development the
Related Integration Server D12, but in the Productive System we
need P12.
Is there a other possibility as to change first things first.
Thanks for your help.

Hi Stephan,
I think this is not the correct approach because development and productive systems are different. You must register your technical systems by means of RZ70 transactions. If you have two different landscapes (DEV, PROD) you must register on two SLD servers.
Doc about SLD: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557

App Server for Interactive Voice system

Similar Messages

Maybe you are looking for