App Server per Lion

Volevo sapere se L’app Server trasforma lion in server oppure necessita di un mac con lion server?

This means your computer does not have the required specifications to handle that operating system.
- http://www.apple.com/osx/specs/.

Similar Messages

OWA Blank Attachment Preview with Office Web Apps Server

Environment: Exchange 2013 CU3 / Office Web Apps Server 2013
OS: Windows Server 2012 R2
After implementing Office Web Apps server per the Integration with Exchange 2013 instructions, attachment previews in OWA show up as blank windows. The pop up says Opening your mailbox, then goes blank. I have the WAC endpoint configured in Exchange,
I can access the discovery URL from the Exchange servers, and I am seeing event 142. Some forums say that these events should be in the CAS application logs. I am seeing mine in the Mailbox server app logs. Has anyone seen a similar issue.
I have also attempted to view the ULS logs on the Office Web Apps server, but I don't see anything that looks like a rendering request. But, I also don't know what that request would look like. The Exchange and Office Web Apps server are
in the same network with no firewall in between them The local firewalls have also been turned off, so any type of blockage should not be the issue.

I dont want to be happy too soon, but i think for me this did the trick:
from time to time, this event appeared in the application eventlog:
Source: MSExchange Certificate Deployment
Event ID: 2005
Task Category: General
Level: Warning
Keywords: Classic
Description:
Federation or Auth certificate not found: ED2C3E86EBE821AAC2C0DEA85CAB5787E2CAC5F3. Unable to find the certificate in the local or neighboring sites. Confirm that the certificate is available in your topology and if necessary, reset the certificate on the Federation
Trust to a valid certificate using Set-FederationTrust or Set-AuthConfig. The certificate may take time to propagate to the local or neighboring sites.
The solution was found here: http://community.spiceworks.com/topic/512374-missing-the-microsoft-exchange-server-auth-certificate
1. New-ExchangeCertificate -KeySize 2048 -PrivateKeyExportable $true -SubjectName "cn= Microsoft Exchange Server Auth Certificate" -DomainName "*.yourdomain.com" -FriendlyName "Microsoft Exchange Server Auth Certificate" -Services smtp
Do not accept to replace the SMTP certificate when prompted
2. Note the thumbprint of the new certificate. Let us assume it is 7A39541F8DF58D4821967DD8F899B27410F7C081
3. $a=get-date
4. Set-AuthConfig -NewCertificateThumbprint 7A39541F8DF58D4821967DD8F899B27410F7C081 –NewCertificateEffectiveDate $a
Accept to continue despite the fact that the certificate effective date is not 48 hours into the future
5. Set-AuthConfig –PublishCertificate
6. Make sure to remove any potential reference to the previous certificate (which might not exist anymore) by doing Set-AuthConfig -ClearPreviousCertificate
Maybe this helps some of you too.

How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.

OSX Server mountain lion Run python web app wsgi

I'm using OSX Server.app of mountain lion. I want to run python web application on my Server.
How can I add wsgi application to my Web sites?
I think I must edit /Library/Server/Web/Config/apache2/httpd_wsgi.conf and /Library/Server/Web/Config/apache2/webapps/com.example.mywebapp.plist.
How should I edit these files?

Server.app already includes the mod_wsgi module and a default mod_wsgi webapp example at /Library/Server/Web/Data/WebApps/hello.wsgi. It's best to leave these as-is and duplicate the files to add additional sites just in case you mess up the config.
Decide where to store your site preferably in the Sites folder. You are right about editing the files you mentioned, however copy and rename them to something like httpd_wsgi.maasaamiichii.conf. Edit that file to set your own WSGIScriptAlias, for example
WSGIScriptAlias /WSGI /Users/maasaamiichii/Sites/WSGI.wsgi
Also edit the .plist file changing 3 keys to your own stuff to match the .conf file. This file should be edited in XCode and remember the ownership has be root:wheel 644 to run. After adding these files you may need to restart the server and/or Server.app.
Next edit the file at /private/etc/hosts to include an entry like
127.0.0.1 maasaamiichii.dev
This so your browsers know the domain is on your devbox machine.
With these steps done, open the Server.app and select Websites in the sidebar. Invent a website name, let's say maasaamiichii.dev is your devbox name and maasaamiichii.com is your internet name. Path needs to match the WSGIScriptAlias path above. Select "Advanced Settings" and enable the middle 3 options (htaccess, folder & cgi). In the bottom box select the Python WSGI webapp to run on that site. Save and you are finished. Back on the front window you can see your website by clicking the lower right corner link.
Please note that the default mod_wsgi as included at
/Applications/Server.app/Contents/ServerRoot/usr/libexec/apache2/mod_wsgi.so
runs the included Python version 2.6? and as such is outdated. Python 3 scripts may not run without custom building mod_wsgi. In addition, the included mod_wsgi is built for "embedded mode" and so the example script forgets all data between threads. To make it remember values persistently the module needs to be compiled for "daemon mode". So depending on what your purpose is for this website, the default config may not be enough persistence.

Installation - Office Web Apps Server on SharePoint 2013 Foundation - Download missing

Hi all,
I'm trying to download Office Web Apps Server.
As of November 24th, the download was relocated on the Volume Licencing Center (as per this
link ).
Connected to VLCS, I'm trying to find the download from the tree / using filter..... I'm not finding anything.
Was the product renamed / not available at this time ?
Thx

Are you aware of the type of subscription needed to download it?
The client I work for is a government department.... I think they have quite a big subscription!
Thx.
Update
I just found a great link to the list of products available thru the Volume Licensing Program
(http://www.microsoft.com/licensing/products/products.aspx#tab=2).
Office Web Apps Server requires an Office 2013 Licence.... We are checking this requirement right now...

Problem with JNI (custom shared library) on App Server

We have a custom built shared library (.so) we want to use with the app server (a webapp). The .so is wrapped with java class and works to spec when tested outside of app server (webapp) environment with test stub. When wrapper class is introduced to App Server (webapp) & embedded function is invoked we recieve java.lang.UnsatisfiedLinkError(). We've looked to make sure $LD_LIBRARY_PATH is correct but still recieve this exception. Any suggestions? Running nm against the .so shows undefined symbols but these should be resolved by $LD_LIBRARY_PATH. Any suggestions?

what version of appserver are u using...if 7.0 then try using their common class loader as per this docs:
http://docs.sun.com/source/817-2171-10/dgdeploy.html#wp69906

How to access JDBC Resource registered in Sun Java System App Server ?

I want to create a stand-alone JDBC application with Java SE using Swing technologies and JNDI technology. The purpose of using JNDI technology is to avoid change of Java Source Code every time I move the database to different location. This Java application will be used in a standalone PC installed with Windows XP Professional with no LAN / WAN connection. Of course, Internet connection is available with the PC.
I use JavaDB to store the data tables and the location of the database is D:\E-DRIVE\SAPDEV. Tomorrow, if I move this database to C:\SAPDEV or any network drive, I do not want to change the Java Source code. I want to use JNDI which, if I am not wrong, helps developers to avoid manual change of Java source code whenever the database location is changed. Changes have to be made only in the JNDI Name which contains all relevant information about the database in order to get connection no matter where the database SAPDEV is stored; it can be placed under D:\E-DRIVE directory or C:\ directory of the hard disk. To implement my intention, I started developing Java application as per the steps mentioned below:
Step 1:
To proceed, first, I sought the help of Sun Java System Application Server Admin Console. I created JNDI object for Connection Pool using the menu path Common Tasks->Resources->JDBC->Connection Pools.
JNDI Name : ABAPRPY
Resource Type : javax.sql.DataSource
Datasource class : org.apache.derby.jdbc.ClientDataSource
Description : ABAP Program Repository
The Connection Pool creation has options for General, Advanced and Additional Settings tabs and I made all the settings relevant to the database I created in D:\E-DRIVE\SAPDEV.
To confirm whether the above settings are correct, I pressed the Ping push button which is available in the General tab of the connection pool creation screen. The system responded with the message Ping Succeeded.
Step 2:
I created a JDBC Resource using the menu path Common Tasks->Resources->JDBC->JDBC Resources.
JNDI Name : jdbc/SAPDEV
Pool Name : ABAPRPY
Description : Database Connection for SAPDEV database
Status : Enabled
I can see all the above settings recorded in the domain.xml which is placed in the folder
C:\Sun\AppServer\domains\domain1\config
Step 3:
I have made sure that Sun Java System Application Server is up and running in the background with JavaDB server. I created a Java Program making sure the following JAR files are included in the classpath:
appserv-admin.jar
appserv-ee.jar
appserv-rt.jar
javaee.jar
fscontext.jar
Plus, the lib directory of JDK 1.6 & C:\Sun\AppServer\domains\domain1\config
Source code of the program is as follows: I used NetBeans IDE to create my project file.
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.naming.*;
import javax.activation.DataSource;
public class JNDILookup {
public static void main(String[] args) {
try {
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/sapdev>");
} catch (NamingException ex) {
Logger.getLogger(JNDILookup.class.getName()).log(Level.SEVERE, null, ex);
When I attempted to compile the above program in NetBeans IDE ,no compilation error reported. But while executing the program, I got the following run-time error message:
SEVERE: null
javax.naming.NameNotFoundException: No object bound for java:comp/env/jdbc/sapdev> [Root exception is java.lang.NullPointerException]
at com.sun.enterprise.naming.java.javaURLContext.lookup(javaURLContext.java:224)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:396)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at SAPConnect.JNDILookup.main(JNDILookup.java:21)
Caused by: java.lang.NullPointerException
at com.sun.enterprise.naming.java.javaURLContext.lookup(javaURLContext.java:173)
... 3 more
Now, I want to come out of this situation; at the same time, I want to preserve the settings I have made in the Sun Java System Application Server Admin Console. That is, I want to programmatically access the data source using Connection Pool created in Sun Java System Application Server Admin Console.
I request dear forum members to provide me an appropriate solution.
Thanks and regards,
K. Rangarajan.

jay44 wrote:
Bare in mind I am attempting the context.lookup() from inside the container (my code is in a session bean). I have accessed the server and have my bean "say hello" first to verify the bean works OK, then I call a method with this rather standard code:
String jndiDataSourceName ="Second_EJB_Module_DataBase";
Logger.getLogger(DynamicPU.class.getName()).log(Level.INFO,"Programatically acquiring JNDI DataDource: "+ jndiDataSourceName);
InitialContext ctx;
try {
ctx = new InitialContext();
ds =(DataSource)ctx.lookup("java:comp/env/jdbc/"+jndiDataSourceName);
} catch (NamingException ex) {
Logger.getLogger(DynamicPU.class.getName()).log(Level.SEVERE, null, ex);
return "Exception generated trying to preform JDBC DataSource lookup. \n"+ex.toString();
But when I run the code the server log shows the initial context is created Ok, but an exception is thrown becasue the resource name is not found:
(and i have tried vriations of ctx.lookup("jdbc/"+jndiDataSourceName) etc etc
You are fine here. It works in container because the InitialContext properties have been supplied already. That was the link I forwarded earlier. The InitialContext you create locally needs to locate the container JNDI. That is what the properties specify.
Where I am confused is where you indicate the stack below is from the server log. So, you initiate a standalone (java main method) application, create an InitialContext, and you see the results in your app server log?
LDR5010: All ejb(s) of [EJB_Module_1] loaded successfully!
Programatically acquiring JNDI DataDource: Second_EJB_Module_DataBase
The log message is null.
javax.naming.NameNotFoundException: Second_EJB_Module_DataBase not found
at com.sun.enterprise.naming.TransientContext.doLookup(TransientContext.java:216)
at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:188)
at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:192)...
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:555)
This is strange since I can see this resource (a JDBC connection named Second_EJB_Module_DataBase) is configured on the server from the server's admin console.
That is why you can obtain a lookup from within the container (app server).
For this lookup to work it may be that one must map the name inside an ejb-jar.xml deployed with the application, but I have also read some resources like jdbc connection should have a default name. Does anyone know if my lookup() should work without using an ejb-jar.xml mfile to explcitly map the reource for my application?
Both EBJ's and data sources can be referenced via JNDI. It's a remote lookup (that is normally optimized if it is running in the same JVM). You should not have any dependencies on a JDBC data source being set-up on ejb-jar.xml. That file can of course impact your EJB's. However, data sources are normally set-up on a container-specific basis (e.g., you probably did it through a console, but there is a spec somewhere about how to set up a data source via a resource the app server looks for; it varies from app server to app server). However, once you have that container-specific data source set-up, JNDI operates vendor-neutral. You should be able to take the code above and move it to JBoss or Weblogic or Tomcat or whatever (this is an ideal, in practice, the vendors sometimes put a data source in a name you would not expect, but again, you can use their JMX console to see what the JNDI name is).
(As I stated above if I have to use a deployment discriptor to get at this JNDI datasource, then solution is not "programmatic" as newly configured datasources could not be accessed without redeploying the entire application).
As JSchell alluded to, you will always have at least something vendor-specific. JNDI itself (the code you wrote) is totally portable. However, you have to set the various JNDI environment properties to a given vendor's spec. Ideally, you should not need a vendor's actual InitialContext application, but it's a possibility. Once you can safely cast to Context, you should be vendor-neutral (if not, demand your money back).
So that is exactly where I am stuck, trying to get the lookup to work and wondering if it should work without and xml file mapping the resource for my app.
What we ended up doing for standalone was to provide our own JNDI. If you look at the open source project JOTM, there are examples on how to use that with XBean (if integrating with Spring, as we did), you can easily set up a data source that runs standalone exactly as you get in the container. Another benefit is you get full JTA/JTS support and the ability to run XA transactions. (This might all be alphabet soup, but the app server gives it to you, and this is the way we ended up doing the same: JNDI + JTA + JTS + XA). It ends up the same application code uses a "vanilla" InitialContext and all we have to do is write one or two xml files (one for our app server, a couple for JOTM), and our actual code works the same.
I still think you have a shot at getting to the container's JNDI, just not using their full-blown app server JAR.
I think there must be a simple way to do this with an ejb-jar.xml, I am no expert in JNDI, I could be missing something simple, I will keep at it and post an answer here if I come up with it.
Thanks, jayIt is simple to code. Getting it to integrate with your app server, yes, that can be challenging. But it has nothing to do with EJB's. Write a simple test. Using nothing but DataSource and InitialContext. Let us know where you get stuck.
- Saish

Issue with lock file in Oracle 10g app server - MDB not running

Hi,
I have Oracle 10g & MQ 6 on my laptop. I generated JNDI bindings for app server-MQ by giving ip address of my machine first. Then i changed it to "localhost" & generated new set of .bindings file.
With this new set i am able to send messages from my program to a queue. I also have an MDB which should listen to the same queue.
However now my mdb is not listening to the queue & i suspect it is due to host address change, - because each time i start the server, i see a lock file created "OracleASRouter_store.lock" - under j2ee\home\persistance. And below is the content of the same -
"O10.1.4.245:/C:/Program Files/Oracle/oc4j_extended_101330/j2ee/home/persistence/"
As per few suggestions on this site, I deleted this file & restated app server, deleted whole content of persistance folder, restarted app server. But each time i see this file created and also see the ip address in log.xml under j2ee\home\log\oc4j
Error message in this log.xml file is
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-09-19T11:22:35.265-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_ID>J2EE EJB-02009</MSG_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>IFLEXNY-EXT99</HOST_ID>
<HOST_NWADDR>10.1.4.245</HOST_NWADDR>
<MODULE_ID>ejb.runtime</MODULE_ID>
<THREAD_ID>10</THREAD_ID>
<USER_ID>chetanmi</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.1.4.245:65858:1190215355296:0</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>[STGMQ:STGMQEJB:TestMDB] Unexpected exception by JMS provider: javax.jms.MessageEOFException: initializeConnection.</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.jms.MessageEOFException: initializeConnection
     at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1075)
     at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1155)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:154)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:110)
     at com.evermind.server.jms.TCPJMSRemoteServer.<init>(TCPJMSRemoteServer.java:68)
     at com.evermind.server.jms.EvermindConnection.<init>(EvermindConnection.java:122)
     at com.evermind.server.jms.EvermindQueueConnection.<init>(EvermindQueueConnection.java:70)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.unprivileged_createQueueConnection(EvermindQueueConnectionFactory.java:101)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.access$000(EvermindQueueConnectionFactory.java:44)
     at com.evermind.server.jms.EvermindQueueConnectionFactory$1.execute(EvermindQueueConnectionFactory.java:81)
     at com.evermind.server.jms.InContainerProxy.doSecureOp(InContainerProxy.java:157)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:78)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:69)
     at com.evermind.server.ejb.MessageDrivenConsumer.createNonXAResources(MessageDrivenConsumer.java:567)
     at com.evermind.server.ejb.MessageDrivenConsumer.initializeJMSResources(MessageDrivenConsumer.java:491)
     at com.evermind.server.ejb.MessageDrivenConsumer.processMessages(MessageDrivenConsumer.java:208)
     at com.evermind.server.ejb.MessageDrivenConsumer.run(MessageDrivenConsumer.java:169)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.io.EOFException
     at java.io.DataInputStream.readInt(DataInputStream.java:358)
     at com.evermind.server.jms.JMSRemoteServer.readCheck(JMSRemoteServer.java:678)
     at com.evermind.server.jms.JMSRemoteServer.readProtocol(JMSRemoteServer.java:696)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:134)
     ... 16 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-09-19T11:22:35.312-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_ID>J2EE EJB-02014</MSG_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>IFLEXNY-EXT99</HOST_ID>
<HOST_NWADDR>10.1.4.245</HOST_NWADDR>
<MODULE_ID>ejb.runtime</MODULE_ID>
<THREAD_ID>10</THREAD_ID>
<USER_ID>chetanmi</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.1.4.245:65858:1190215355296:0</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>[STGMQ:STGMQEJB:TestMDB] All message consumer threads have terminated due to provider errors, stopping MDB.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
And my MDB is NOT WORKING. Please let me know how to deal with this.
Your suggestions would be much appreciated.
Regard,
Chetan

Line # 127 is creating a new application object using ApplicationFactory.
ApplicationFactory aFactory =
(ApplicationFactory) FactoryFinder.getFactory(
FactoryFinder.APPLICATION_FACTORY);
application = aFactory.getApplication();
The only way that can throw a null pointer is when aFactory is NULL. I really doubt this case because, the same thing is doen in init() of FacesServlet. If it had failed there, the exception should have occured during server startup.
This leaves me more and more confused....I am desperate for some help now :((
Ramesh

Update 10.6.8 server to lion

What are the steps I need to follow to update my 10.6.8 server to lion server? My xservers are old and will only go to lion.

In order to install Mac OS X 10.7 you will need:
Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of RAM
Mac OS X 10.6.6 or later with the Mac App Store installed
At least 4GB of additional disk space to accommodate the download, but more is obviously recommended

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?
I run a personal Server at my office. It's configured under my own domain as server.mydomain.com. It's setup that it properly receives and sends e-mail for mydomain.com. I use my own mailbox [email protected] to get all my personal mail.
I'm looking to add another domain as a secondary way for people to get to my content and information.
I want the same address [email protected] and [email protected] to arrive in the same mailbox at my server.
How do i do that?

it does look like you can add virtual domains in the GUI of Server.app on at least some versions, but I don't have an OS X Server 10.8 version handy to check.
I'd encourage spending some time to learn the command line. In general, the payoff for learning the command line will be worth the effort expended. You're running a mail server here and sooner or later the capabilities of the GUI will fail you. This whether due to a configuration omission in the GUI itself, or due to the need to troubleshoot a malfunctioning mail server, a need to automate one or more of the Postfix-related sequences, or some other IT-related task. Entirely FWIW, of course.
Here's a cut-and-paste of the sequence just used to test the command line access to the Postfix configuration, first fetching the current value, appending example.com as the second domain, then displaying the new value, then restarting the Postfix server. Don't enter the dollar signs; just the postconf command and following. Adjust example.com to match your domain...
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost
$ sudo postconf -e 'mydestination = $myhostname, localhost.$mydomain, localhost, example.com'
Password: {your admin password here}
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost, example.com
$ sudo postfix reload
The Postfix and Postconf commands work irrespective of the OS X Server version; the tools reference the data files as needed.

10.1.2 app server deploy

Hi All,
I am using Jdev 10.1.3 and configured it with Jdk 1.4 and compiled my code. No errors (I had to do this configuration, bcza we have Oracle 10.1.2 app server )
Then, I deploy this application on 10.1.2, it is deployed successfully.
First login page I visit, I get following error.:---
500 Internal Server Error
javax.faces.el.EvaluationException: oracle.jbo.ConfigException: JBO-33003: Connection name GEMINIDBConnection1 not defined
Fact is this dataConnection is defined in my Jdev and when I "Test" it is success, so all parameters are correct.
Then why does deploy on standalone app server gives this error ??
What additionally do I need to do, with respect to this error if I am deploying on standalone server ??

Hi Avi,
We could not get it resolved inspite of cheking that link. As per the link, we have same connection name in our bc4j.xcfg.
Can you help us what is going wrong ?
Hi Shay,
I checked that link.
1>In my Jdev 10.1.3 I have connection created by name GEMINIDBConnection1
I tested that connection. I get success.
2>With this connection, my app runs good in embedded server
3>The bc4j.xcfg file in my application is as follows and it does have a connection name correctly listed.
<?xml version = '1.0' encoding = 'UTF-8'?>
<BC4JConfig>
<AppModuleConfigBag>
<AppModuleConfig name="GeminiLoginAppModuleLocal">
<DeployPlatform>LOCAL</DeployPlatform>
<JDBCName>GEMINIDBConnection1</JDBCName>
<jbo.project>Model</jbo.project>
<AppModuleJndiName>com.gemini.model.appmodule.GeminiLoginAppModule</AppModuleJndiName>
<ApplicationName>com.gemini.model.appmodule.GeminiLoginAppModule</ApplicationName>
</AppModuleConfig>
</AppModuleConfigBag>
<ConnectionDefinition name="GEMINIDBConnection1">
<ENTRY name="JDBC_PORT" value="1521"/>
<ENTRY name="ConnectionType" value="JDBC"/>
<ENTRY name="HOSTNAME" value="briss-dev6.fjds.net"/>
<ENTRY name="user" value="gemini"/>
<ENTRY name="ConnectionName" value="GEMINIDBConnection1"/>
<ENTRY name="ServiceName" value="ORCL.FJCS.NET"/>
<ENTRY name="JdbcDriver" value="oracle.jdbc.OracleDriver"/>
<ENTRY name="password">
<![CDATA[{904}050E30CE18609RRFDFCFBD8E10DB032451D]]>
</ENTRY>
<ENTRY name="ORACLE_JDBC_TYPE" value="thin"/>
<ENTRY name="DeployPassword" value="true"/>
</ConnectionDefinition>
</BC4JConfig>
4>Now, I deploy this application on Standalone server 10.1.2 It gets deployed succeess. So far as deploment concern, I do not make any change in any file. I just create a ear using Jdev deployment wizard and deploy it. I get success.
5>I go to server console, it says the app status is active. So, I go to my login page on this server and keep getting :-
500 Internal Server Error
javax.faces.el.EvaluationException: oracle.jbo.ConfigException: JBO-33003: Connection name GEMINIDBConnection1 not defined at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:206) at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:154)
any idea ? Do I need to do anything alse manually, as I deploy on standalone server. ? Standalone server is running on windows.
thanks in advance.
pp

Scheduling jobs in different app server

Hi all,
Does anyone knows how to schedule a background job in a specific app server, by using FM JOB_SUBMIT / JOB_CLOSE?
I've analysed SAP documentation for these FMs and it says that the parameter EXTPGM_SYSTEM can be used to inform the app server in which the program will be ran. However, it seems to be for external programs and my requirement is just to set a abap report to run in a specific app server.
SAP documentation says:
EXTPGM_SYSTEM Parameter
Name of the host system on which an external program is to be run. You must supply a value for this parameter.
Note: You must specify both the name of an external program and the name of the system on which it is to be executed.
As I don't have an external program, just the abap report, I'm not sure I can use such parameter to schedule the job at the desired app server.
Please advise.
Thanks,
Rafael.

Kartik,
there is another program which people uses to read the generated files. As per the server load balancing, some output files are being created in server A, and some in server B. With this parameter, the output files would be generated only in server A.
So, Bryan, that does make sense.
So, you mean I should consider only JOB_CLOSE in order to inform target system? Should I ignore the external program parameters in JOB_OPEN?

Using JDO in a Servlet container/app server

Hi,
I was just wondering what Solarmetric recommends when using Kodo in a
servlet container/app server. Specifically the following:
1. Should each user session maintain a PersistenceManager or should the
PM be created per request? I am thinking it might be expensive to
maintain PMs across requests since you may have idle sessions and the
PMs may hold database resources? But since PMs aren't pooled in Kodo is
creating/closing a PM per request expensive or is it offset by Kodo's
connection pooling?
2. Is it advisable to store data to be displayed on a JSP by storing the
JDO instances themselves or serializable proxies (simple data beans) of
these objects in a user's session?
3. If you can store the JDO instances in the session, do you need to
make them transient instances using makeTransient() and call close() the
PersistenceManager?
Thanks in advance,
Khamsouk

These are all very good questions. There really is no one right answer to any
of them, so I'll just try to educate you on the issues involved and you can
make your own decision. Hopefully other people who are actually using Kodo
in a servlet/JSP environment will chime in too.
1. Should each user session maintain a PersistenceManager or should the
PM be created per request? I am thinking it might be expensive to
maintain PMs across requests since you may have idle sessions and the
PMs may hold database resources? But since PMs aren't pooled in Kodo is
creating/closing a PM per request expensive or is it offset by Kodo's
connection pooling?As long as you are outside of a datastore transaction, a PM does not maintain
any database resources. The only significant state it maintains is a soft
cache of persistent objects that have already been instantiated. If you are
using Kodo 2.3 RC1 and have no set the
com.solarmetric.kodo.DefaultFetchThreshold property to -1, then some
large collections you obtain from query results or relation traversals may be
scrollable result sets on the back-end, in which case they obviously maintain
some database resources.
2. Is it advisable to store data to be displayed on a JSP by storing the
JDO instances themselves or serializable proxies (simple data beans) of
these objects in a user's session?
3. If you can store the JDO instances in the session, do you need to
make them transient instances using makeTransient() and call close() the
PersistenceManager?I'll address these together. JDO fully supports serialization, and in fact
I think you'll find it does so in exactly the way that you want. If you choose
to store serialized persistent objects in the session, then during
serialization the objects will transparently pull in all of their persistent
state and relations, so the entire object graph is serialized. When you
deserialize, the objects will no longer be attached to their persistence
manager -- they will be transient.
Another options is to store the object IDs in the session, and re-retrieve
the persistent objects for each web request.
One design pattern that can probably net very good performance is to maintain
a global read-only persistence manager that you use to dereference these IDs.
Of course, if you ever want to change an object, you'll have to re-fetch it
in a new persistence manager, and evict it from the global manager's cache.
I hope this helps.

A downloaded app corrupted my Lion OX

After downloading an app from the App Store my Lion OS X became corrupted and I can not reinstall because the data file is larger than my allowable 4 Gig per month max. I'm now setting at pause with a partial download of 124 MB of a total download size 4.37 GB. What do any of you suggest?? I can not cancel the the download attempt because it is not permitted by Apple. Do a little each month untill finished or what say YOU???

Whew, terrible news Jack.
If there's an Apple store nearby, I'd call & see what they can do for you.

SQL Exceptions, transport-level errors on SharePoint 2010 App Server

SharePoint 2010 becomes inaccessible 2-3 times per day. It happens at approximately the same times: 8 PM, 1 AM and 1 PM. It is inaccessible for about 3-4 minutes and then comes back on its own.
During the time it is down, we see the following errors in the event viewer on the application server:
EventID: 5586 Task Category: Database -
Unknown SQL Exception 64 occurred. Additional error information from SQL Server is included below.A transport-level error has occurred when receiving results from the server.
(provider: TCP Provider, error: 0 - The specified network name is no longer available.)
EventID: 3 Task Category: None -
.Net SqlClient Data Provider: System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error:
0 - The specified network name is no longer available.)
EventID: 6398 Task Category: Timer -
The Execute method of job definition Microsoft.Office.Server.Search.Monitoring.HealthStatUpdateJobDefinition (ID f9db48f1-f115-47ab-99b6-552460cbb782) threw an exception. More
information is included below. A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
EventID: 8086 Task Category: Business Data -
The BDC Service application failed due to a SQL Exception: SQLServer host ums1spd1v. The error returned was: 'A transport-level error has occurred when sending the request to
the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)'
The SharePoint logs have errors during the same time period saying the same kinds of things: Sql exception raw message: A transport-level error has occurred when receiving results from the server,
The specified network name is no longer available, etc.
Our network administrator has looked at the issue and cannot find any network problems.
He setup a continuous ping from the app server to the database server.
Even during the times these errors are occurring, the app server is still able to reach the database server.
However, you cannot ping the app server itself during this time.
Our database administer cannot find any SQL Server issues.
There are no errors in the event viewer or the SQL logs on the database server.
In Central Admin, we can see that one or two jobs fail with SQL errors during the times these errors take place.
It is almost always the “User Profile Service Application – User Profile Language Synchronization Job” and often the “Health Statistics Updating” or “Crawl Log Report for Search Application Search Service Application”.
These jobs run successfully at many other times during the day.
Is there a good way to tell if the database, network or SharePoint itself is the root of these problems?
The database and network guys say there are no problems in their areas, but all I can find in the SharePoint logs is that it can’t reach the database server.
Thank you for any suggestions you may have!

Since these seem to happen at very specific times, I would run a NetMon trace at that window to capture what is going back and forth (or perhaps the timer service is just unable to reach the SQL server).
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

App Server per Lion

Similar Messages

Maybe you are looking for