App size not (too large within window) correct can...

When the app loads for me the contents inside are bigger than the window itself. This means I can't see the IM bit at the bottom of conversations and options page and things like that.
Anyone know how to reset the setting on the app i have tried uninstalling and re-installing. Basically as soon as it loads you can see the central loading icon jump to what it must think is center of my display but its not resulting in large portions of the app not being visible.
Thanks!

Can you click on the 'Restore Window' button and manually resize the LR window.
If that doesn't work try resetting your LR Preference file:
http://members.lightroomqueen.com/index.php/Knowledgebase/Article/View/1148/198/how-do-i-d elete-the-lightroom-preferences-file

Similar Messages

HT3142 Display size is too large on yahoo mail

My display size is too large on yahoo mail page only (page I need and use most). How do I correct it, please?
Changing the display selections from system preferences is not working.

There may be a control within the application you are running Yahoo.
Which browser are you using online to access Yahoo?
In the View menu bar of the open application, there may be a choice
to change the size of the display content in the window itself, check.
Some of these use a keyboard command, should the setting go to
Full Screen, you'd need to know the default or escape combination
of keys to restore the application's window to a standard size. This
kind of inside-application setting is not reflected System Wide.
Since I don't know the browser, (as I have five, each is different)
I can't recommend a keyboard combination to re-size the open
application's view or window setting. They can be non-standard.
But that likely is where you'd have to change it back to normal.
PS: Snow Leopard is Mac OS X 10.6.8.
(Tiger is OS X 10.4.x)
Good luck!

"File size is too large"

When I imported the only 4 files in a particular folder (scans of photos) into the Organiser, the message "File size is too large" came up for two of them instead of preview images, although do appear to have been added to the Catalog as their MB size, pixel dimensions and creation date show in the Properies General tab.
I take it this must relate to pixel count and not the file size per se as the two tifs (13.2 and 13.3 MB but 1792 x 2508 and 2518 x 1798 pixels) are fine, while the two JPGs (12.9 and 30.8 MB and 9616 x 6480 and 7048 x 10376) are the ones without preview images?
I wasn't aware of this as a problem, so can anybody tell me please, have I just set too low a limit somewhere or is there a real restriction?
And is this new to PSE6 or something that's been around for a while?
Thanks, Peter

I have a 212mb psd file (a panorama). I have Elements 6.0 and 4 meg RAM, Vista.
I went through the regedit process as outlined in Adobe Technote kb402760 and upped it to 1,000,000,000. I would think that would have given enough headroom for my file size. But it didn't. I still have the generic "file size too large" on my thumbnails.
I did note that the tech note had a different location for the Software/Adobe/Elements 6.0/Organizer (HKEY_LOCAL_MACHINE\ ) from the location in my file structure. In fact, this string was listed in at least three places OTHER THAN the one indicated in the Technote. How likely is it that adding "MaxImageSize" to the Elements 6.0 register locations other than specifically indicated is the reason why the file size capacity was not increased. Why doesn't Elements show up in the location indicated by the Tech Note?
NOTE FOR ADOBE: Why isn't this a more easily accessible option in the user interface? If I have a large file that slows things down a bit on my thumbnails, that could be my choice. This artificial constraint built into the regedits that no one goes to is too much like parental controls for 5 year olds.

"Balance in Group currency USD is too large for automatic correction" error

Hello Gurus,
Please help me..
When we post document from FB01, we want to enter amount in group curreny different than what SAP calculates, But when we enter different amount(than what sap calculates ) we are getting "Balance in Group currency USD is too large for automatic correction" error.
We want SAP to take whatever we enter on the Group Currency Amount field and not to calculate/validate anything itself.
Is it possible to disable this message?
I tried changing the hard error "E" to warning "W" using "Message Control" but it did not work.
Or is there any User exit/ BADI/ BTE, where i can change the tolerance meaning if SAP calculates Group Currency amount $1000.10 and SAP takes upto 1000.18, So if i change the tolerance to 90 cents instead of 8 cents and try to enter $1001 and SAP can take it? ( I know its so weird requirement, we are not using SAP as it is, but everyone really wants it here:(
Our Local/ Document currency: EUR
Group Currency: USD
Please suggest any solution.
Thanks so much in Advance!

Hi Shrikanth,'yes I did checked the SAP note and for the correction,
'Import the corresponding Support Package or implement the attached advance correction'
frankly speaking, i didnt understood what the SAP note is trying to say What i can make out from it was that There is some Program error and that needs to be rectified.
Can You please tell me as to how to imoplement this SAP note.
Thanks
Manish

Balance in Group currency USD is too large for automatic correction

Hi
In FBB1 Tcode I am posting the documents.
I got the the below error.
Balance in Group currency USD is too large for automatic correction.
How to solve it.

Hi Shrikanth,'yes I did checked the SAP note and for the correction,
'Import the corresponding Support Package or implement the attached advance correction'
frankly speaking, i didnt understood what the SAP note is trying to say What i can make out from it was that There is some Program error and that needs to be rectified.
Can You please tell me as to how to imoplement this SAP note.
Thanks
Manish

How do I split a pdf file when the file size is too large?

How do I split a pdf file when the file size is too large? Thanks!

With Adobe Acrobat. It can also optimize your document to make the size smaller.

HT4059 ibook app is not working in my ipad2, i can see stored books but unable to open them. this happened since i hv updated to ios6. ipad wasnt jailbreak. kindly assist me

ibook app is not working in my ipad2, i can see stored books but unable to open them. this happened since i hv updated to ios6. ipad wasnt jailbreak. kindly assist me

Having the same issue, can someone please enlighten us?

App could not be installed from Windows Store, Error code:0x80240031

i have tried many times but same error exits only with this app (Perfect 365), rest all apps are being installed easily and are working.
how can i install this app(Perfect 365) and what does this error code mean.

I to am getting this error trying to update from Win 8 x64 Pro Upgrade edition to Win 8.1. Only using Windows defender and Windows Firewall. A couple things to note:
1. My connection to the Internet on this machine is through my phone only, currently have no other means of reaching the Internet, so could this possibly be ISP related? Does the "Windows Store" use some other port rather than 80 or 8080? What ports
does it use? No documentation on this...
2. I ran a system refresh, same exact results. Using "sfc /scannow" finds no errors. I'm close to backing up and FFR-ing at this point.
3. Updates through good old "Windows Update" from control panel install just fine. System (including drivers) are all up-to-date.
4. Other app updates (for "Sports" "Music" and "Video" apps) will not install from the store either. These fail with 0x80072f8 though.
5. Tried "wsreset" and got the same results. I'm admin on the machine and account is tied to my MS Live account.
I'm at a loss here. Ideas?

In Address book print window opened too large for window. Unable to close

Using Address book, trying to print lables for a group, print window opened to large for window.... cannot cancel or close out.

In general, in any window presented which calls for user action, if a button is highlighted (usually in blue if the OS is in charge) then pressing Return or Enter will do the same as clicking that button.
Most of the time the highlighted button is the one which is most usable - the "Print" button in that dialog window, for example, or the "Save" button in a Save dialog window.
The keystroke Command-. (Command-periodkey) will usually invoke a "Cancel" button if such is present in a window.

Trying to send vid clip results in "file too large". Yet friends can send me clips larger. Why is this?

I cannot send video clips I have taken to friends. I get "File too large". Yet friends seem to be able to send ME larger clips from their phones.
Do they have some app or something that zips or compresses files automatically?

Try reproducing the issue in Windows safe mode with Networking.... I think the guess of a synchronization issue was correct. I just think the blame finger went to the wrong place. Windows safe mode should confirm my guess... Or prove me wrong
Note that i can move messages in imap to live from junk to inbox and they are not corrupt.

NoSquint properly resized web pages, but the upper taskbars are still too large--for instance, I can only the beginning of the URL. How to fix?

After the latest Firefox version magnified everything, I used the NoSquint add-on (at 60%), which now makes web pages look as they did before. However, although the top two bars at the top of the screen are of normal size, the lower ones are still too large. The bar that contains the URL on the left and a Google search space on the right, for instance, can display only the first couple of letters of a URL (after the //).
How do I make these bars look the way they used to? Thanks.

Hi Anne, there is a setting in Firefox that controls the scaling of both the toolbar area and the content area. I'm guessing that you have your Windows font setting at 150%. In that case, I'm going to suggest you try to manually adjust the scaling in Firefox to 125% and then set NoSquint to 80%.
Here we go!
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''pix''' and pause while the list is filtered
(3) Double-click '''layout.css.devPixelsPerPx''' and change its value to '''1.25''' for the equivalent of 125% font size in Windows display settings.
If you view a tab with an address bar and this is not quite right you can adjust it to a different value, such as 1.2 (120%) or 1.3 (130%).
Please do not go lower than 1.0 or everything will start to get tiny.
Once that looks right, you can go back into your NoSquint settings and up your global zoom level for content to a comfortable number.
Can you get it the way you want?

TS3899 my recoverable mailbox wont stop. it seems i sent an email containing too uch or too large of pictures. how can I stop it

my recoverable mailbox won't stop. It seems I sent an email containing too many photos or too large, it will not stop attempting to send.

Posting this as it took me forever to find the fix. No one with my carrier, Apple etc. seemed to know of the fix or for that matter even recognize that it was an issue. Hopefully this will help someone else. This is for Exchange 2010
Log on to the Exchange server hosting OWA
start run cmd, right click on the cmd and choose run as adminsitrator
cd C:\Windows\System32\inetsrv\
appcmd.exe set config -section:system.webServer/serverRuntime /uploadReadAheadSize:"16000000" /commit:apphost
appcmd.exe set config "Default Web Site" -section:system.webServer/serverRuntime /uploadReadAheadSize:"16000000" /commit:apphost
restart IIS
Note that 1600000 should be the size of the allowed email in bytes.

Expanded Raid Size Not Showing Up In Windows Explorer

Hello,
Using Server 2012R2. I had a 32TB RAID 6 array and added more disks. I used MegaRAID Storage Manager to 'expand' the logical disk to70TB. The expansion/initializing is complete, according to MegaRAID. However, when looking in windows explorer, the volume
is still 32TB.
In the 'Server Manager -> File and Storage Services -> Volumes' it says the volume is still 32TB with some free space.
In the 'Server Manager ->File and Storage Services -> Volumes - > Disks' it says volume capacity is 70TB and 38 is 'Unallocated'
Is the volume really still 32TB after waiting 8 days for MegaRAID to expand the array or is windows explorer just not refreshing the information? Or, is there something else I must do?
Any help is appreciated.

When I try to do this, I get the error...
"the volume cannot be extended because the number of clusters will exceed the maximum number of clusters supported by the file system"
I searched around for that error and found that 4k size clusters won't allow volumes over 16TB.
http://social.technet.microsoft.com/Forums/en-US/6780cae6-90f2-4f16-b4d2-c975e1d2eb63/error-the-volume-cannot-be-extended-16tb-volume?forum=dataprotectionmanager
I entered those commands and here were the results for that volume.
C:\>fsutil fsinfo ntfsinfo M:
NTFS Volume Serial Number :       0x3262d94b62d91487
NTFS Version   :                  3.1
LFS Version    :                  2.0
Number Sectors :                  0x000000105efbefff
Total Clusters :                  0x0000000082f7df7f
Free Clusters :                  0x0000000011996df1
Total Reserved :                  0x0000000000000600
Bytes Per Sector :               512
Bytes Per Physical Sector :       512
Bytes Per Cluster :               16384
Bytes Per FileRecord Segment    : 1024
Clusters Per FileRecord Segment : 0
Mft Valid Data Length :           0x0000000015840000
Mft Start Lcn :                  0x0000000000030000
Mft2 Start Lcn :                  0x0000000000000001
Mft Zone Start :                  0x00000000139d6460
Mft Zone End   :                  0x00000000139d9660
Resource Manager Identifier :     ACC105BE-A72B-11E3-80B5-00219B9AABFF
EDIT: Also note that in MegaRAID the volume is displayed as having 64KB clusters.

Font and Icon size are too small on windows 8.1 computer.

I have a windows 8.1 computer with a 64 bit operating system with the most up to date version of Adobe CS6 and a screen resolution of 2560 x 1440 pixels. When I open CS6 the font and icons are minescule and I cannot fix it by adjusting the screen resolution. Is there a way to correct this?

Have you tried setting the resolution to 1366 x 768?
I know it defeats the purpose of having a HiDpi screen, but Photoshop CS6 was released when such displays were not common.
Photoshop CC 2014 has an experimental 200% UI scale for such PCs, but it is a $10 a month subscription to the Photography Plan. You can trial it out to see if you can use it.
Gene

Calendar app is not viewable. The window will not resize. Can only see header of the app. Have restarted app and computer.

This is all I can see. it will not resize the window, full screen mode shows only this as well.

It really seems like a group policy issue, something like network security, and have you tried to re-map the drives, test the restult again.
you should post you question in this forum
http://social.technet.microsoft.com/Forums/en-US/home?forum=winservergen they're good at these kinds of issues.

App size not (too large within window) correct can...

Similar Messages

Maybe you are looking for